Related
Hi...
I have a problem with the wifi of Huawei P8 Lite [Dual Sim]..
whenever i turn on the wifi it does not show any Network in the list..
My Specs:
Huawei P8 Lite
Android: 5.0.1 Lollipop
Build Number: ALE-L21C185B160
EMUI 3.1
Franinso said:
Hi...
I have a problem with the wifi of Huawei P8 Lite [Dual Sim]..
whenever i turn on the wifi it does not show any Network in the list..
My Specs:
Huawei P8 Lite
Android: 5.0.1 Lollipop
Build Number: ALE-L21C185B160
EMUI 3.1
Click to expand...
Click to collapse
That's a defect with the wifi-card. I had this problem too and I sent it to the assistance. They changed all the motherboard and now it's running fine. That is without doubt, the only solution, according to my experience and many other's who had the exact same problem.
I had this once and a reflash helped xP
amarildo.rajta said:
That's a defect with the wifi-card. I had this problem too and I sent it to the assistance. They changed all the motherboard and now it's running fine. That is without doubt, the only solution, according to my experience and many other's who had the exact same problem.
Click to expand...
Click to collapse
thats weird, i have found too many users around with that Bug.. in my opinion i think it has some problem with software etc not with hardware!
VenityZ said:
I had this once and a reflash helped xP
Click to expand...
Click to collapse
Can you please tell me how to reflash it?
Franinso said:
thats weird, i have found too many users around with that Bug.. in my opinion i think it has some problem with software etc not with hardware!
Can you please tell me how to reflash it?
Click to expand...
Click to collapse
Download the Firmware for you device from Huawei consumer , the same or up. Unpack the update file and copy the dload folder inside of it into the sdcard root. Power of phone and hold Volume up + Volume down + Power at the same time until the firmware gets flashed. You will see it.
VenityZ said:
Download the Firmware for you device from Huawei consumer , the same or up. Unpack the update file and copy the dload folder inside of it into the sdcard root. Power of phone and hold Volume up + Volume down + Power at the same time until the firmware gets flashed. You will see it.
Click to expand...
Click to collapse
I have done this already.. i tried it alot every time whenever i do this an error comes "Software Installation faild"
what should i do...? tried both same firmware B160 and updated firmware B170
Franinso said:
I have done this already.. i tried it alot every time whenever i do this an error comes "Software Installation faild"
what should i do...? tried both same firmware B160 and updated firmware B170
Click to expand...
Click to collapse
Do you have unlocked bootloader.?
VenityZ said:
Do you have unlocked bootloader.?
Click to expand...
Click to collapse
yes....
I have some problem. 3x time flash android 6.0. 4x factory reset. wipe data all i try. Nothing. Today send my phone to service
Franinso said:
yes....
Click to expand...
Click to collapse
Download Firmware pakage and the Huawei pupdate Extractor , open it put in the update.App into it and extract the important things like system data etc and flash them via fastboot
VenityZ said:
Download Firmware pakage and the Huawei pupdate Extractor , open it put in the update.App into it and extract the important things like system data etc and flash them via fastboot
Click to expand...
Click to collapse
'
thats what i really don't know how to do this.. because i am almost new doing all this stuff on an android mobile.!
Franinso said:
'
thats what i really don't know how to do this.. because i am almost new doing all this stuff on an android mobile.!
Click to expand...
Click to collapse
1. Download it from xda
2. Extract and open it (the tool)
3. Unpack the firmware and get the update.app
4. Drag the App with your Mouse into the Extractor window
5. Right click and extract all
6. Get ready fastboot folder and copy all images (IMG) in there
7. Execute command promt and reboot with ADB - adb reboot bootloader
8. Once you are in fasboot , type
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash data data.img
fastboot flash userdata userdata.img
gl
VenityZ said:
1. Download it from xda
2. Extract and open it (the tool)
3. Unpack the firmware and get the update.app
4. Drag the App with your Mouse into the Extractor window
5. Right click and extract all
6. Get ready fastboot folder and copy all images (IMG) in there
7. Execute command promt and reboot with ADB - adb reboot bootloader
8. Once you are in fasboot , type
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash data data.img
fastboot flash userdata userdata.img
gl
Click to expand...
Click to collapse
done. but still no wifi network
Your GPS and Bluetooth are also gone dead. I have done reflashing, factory reset nothing works. Brought it the Huawei service center , replaced the main board. Everything fixed, however now I can not obtain the bootloader unlock code for the new board from the Huawei site.
Now i have submitted my mobile to huawei service center they said me to wait for 1 week..
will update my thread after ..
DrLitte said:
Your GPS and Bluetooth are also gone dead. I have done reflashing, factory reset nothing works. Brought it the Huawei service center , replaced the main board. Everything fixed, however now I can not obtain the bootloader unlock code for the new board from the Huawei site.
Click to expand...
Click to collapse
Franinso said:
Now i have submitted my mobile to huawei service center they said me to wait for 1 week..
will update my thread after ..
Click to expand...
Click to collapse
I told you that it was the only solution!
Actually you cant say that. Ever heard of software errors?
I have received my mobile on the 3rd day after submitted to Huawei Service Center..
they said they replaced motherboard of my mobile. and now everything works fine..
thanks to all the members who comment here for helping me.. Really appreciate you guys..!!
PS: I am really sorry for my late reply...
ofc if ur unlocked bootloader it's easy to downgrade ur device
I have already unlocked bootloader, if I send it to huawei service they will say something that it is my fault? I lose warranty?
Hello
I have the p8 lite ALE-21FRAC530B181 with android version 5.0.1, and the EMUI is 3.1.1
I want to upgrade it to android 6.0 but when I start the installation, I have an error message right away. I used the file provided here : https://forum.xda-developers.com/p8lite/general/guide-huawei-p8-lite-downgrade-to-5-0-t3381013
and here : https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
So I tried to update to B188 first, but I had the same problem.
I unlocked the bootloader, so maybe the issue come from there. Also it is not simlock
any help will be welcome
Thanks
leo15411 said:
Hello
I have the p8 lite ALE-21FRAC530B181 with android version 5.0.1, and the EMUI is 3.1.1
I want to upgrade it to android 6.0 but when I start the installation, I have an error message right away. I used the file provided here : https://forum.xda-developers.com/p8lite/general/guide-huawei-p8-lite-downgrade-to-5-0-t3381013
and here : https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
So I tried to update to B188 first, but I had the same problem.
I unlocked the bootloader, so maybe the issue come from there. Also it is not simlock
any help will be welcome
Thanks
Click to expand...
Click to collapse
Try converting to Europe location or any other....I can't find any marshmallow update for your region
HaiderHady said:
Try converting to Europe location or any other....I can't find any marshmallow update for your region
Click to expand...
Click to collapse
okey but how can I do that ? And then what do I do?
leo15411 said:
okey but how can I do that ? And then what do I do?
Click to expand...
Click to collapse
Follow steps of converting to dual sim ?
Beware say bye bye to your data on cell phone.....Always good idea to backup
HaiderHady said:
Follow steps of converting to dual sim
Beware say bye bye to your data on cell phone.....Always good idea to backup
Click to expand...
Click to collapse
So according to this tuto https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994.
I have to unbricked the phone before convert into dual sim.
But when I launch minimal ADB and fastboot and enter this lines of code :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
I have the message "waiting for devices" but I have already installed hisuite so I should have all the driver installed. I unlock the bootloader too. When I go in fastboot mod, there is "phone unlock" written.
What can I do ?
leo15411 said:
So according to this tuto https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994.
I have to unbricked the phone before convert into dual sim.
But when I launch minimal ADB and fastboot and enter this lines of code :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
I have the message "waiting for devices" but I have already installed hisuite so I should have all the driver installed. I unlock the bootloader too. When I go in fastboot mod, there is "phone unlock" written.
What can I do ?
Click to expand...
Click to collapse
Your pc is not identifying your device as connected and hisuite doesn't come with fastboot drivers... Check device manager (of Windows Pc if you have)
And find FastBoot.2.0 driver and update it from Windows update
HaiderHady said:
Your pc is not identifying your device as connected and hisuite doesn't come with fastboot drivers... Check device manager (of Windows Pc if you have)
And find FastBoot.2.0 driver and update it from Windows update
Click to expand...
Click to collapse
ok so I have now all the drivers but there is still the message "waiting for device". Do I need to extract the image from a specific update.app ? Or is it just the procedure very long ?
thank you a lot for your help :good:
leo15411 said:
ok so I have now all the drivers but there is still the message "waiting for device". Do I need to extract the image from a specific update.app ? Or is it just the procedure very long ?
thank you a lot for your help :good:
Click to expand...
Click to collapse
You need to extract UpDate.App...four images CUST,SYSTEM,BOOT,RECOVERY and have your device in fastboot mode connected to your pc
HaiderHady said:
You need to extract UpDate.App...four images CUST,SYSTEM,BOOT,RECOVERY and have your device in fastboot mode connected to your pc
Click to expand...
Click to collapse
Yes I know that, and I have already tried.
My questions were: which UPDATE.app I must use for the extracion ? Does it matter ?
And, how long is the unbricking ? 10min, 30min, or several hours ?
leo15411 said:
Yes I know that, and I have already tried.
My questions were: which UPDATE.app I must use for the extracion ? Does it matter ?
And, how long is the unbricking ? 10min, 30min, or several hours ?
Click to expand...
Click to collapse
No it doesn't.....it took my really old pc total of 8 minutes
HaiderHady said:
No it doesn't.....it took my really old pc total of 8 minutes
Click to expand...
Click to collapse
well it is not working, I checked my devices manager and I attach a screenshot (it is in french...) with the detail of the driver. There is an exclamation point close to "android bootloader interface"
leo15411 said:
well it is not working, I checked my devices manager and I attach a screenshot (it is in french...) with the detail of the driver. There is an exclamation point close to "android bootloader interface"
Click to expand...
Click to collapse
Hmmm.....Try to uninstall this driver....(Both of them) connect your device again and you should get a notification of installing Fastboot2.0 driver...Install it...or let windows update install it and then check if it helps
And yes before uninstalling try to Update this android bootloader interfaces driver
Sent from my ALE-L21 using XDA Labs
Hello,
I have bricked my phone, cannot go into recovery to flash the stock recovery using the dd method and the only place i can go is fastboot.
In fastboot i meat a problem of FRP Lock wich prevents me from flashing the old recovery and using the dload update method.
Any ideas how to fix this?
My device: P10 Lite (WAS-LX1C432)
davidhozic said:
Hello,
I have bricked my phone, cannot go into recovery to flash the stock recovery using the dd method and the only place i can go is fastboot.
In fastboot i meat a problem of FRP Lock wich prevents me from flashing the old recovery and using the dload update method.
Any ideas how to fix this?
My device: P10 Lite (WAS-LX1C432)
Click to expand...
Click to collapse
frp lock = green color = dc phoenix
with was-lx2jc719(dload method) you boot normally but you won't recive any update because there isn't system updater, you'll need install a file explorer and keyboard
davidhozic said:
Hello,
I have bricked my phone, cannot go into recovery to flash the stock recovery using the dd method and the only place i can go is fastboot.
In fastboot i meat a problem of FRP Lock wich prevents me from flashing the old recovery and using the dload update method.
Any ideas how to fix this?
My device: P10 Lite (WAS-LX1C432)
Click to expand...
Click to collapse
you can try this :
https://forum.xda-developers.com/p10/how-to/twrp-how-to-root-p10-lite-t3617418/page6
[email protected]@[email protected] said:
you can try this :
https://forum.xda-developers.com/p10/how-to/twrp-how-to-root-p10-lite-t3617418/page6
Click to expand...
Click to collapse
waka the guide will not works if frp is green
[email protected]@[email protected] said:
you can try this :
https://forum.xda-developers.com/p10/how-to/twrp-how-to-root-p10-lite-t3617418/page6
Click to expand...
Click to collapse
I cannot relock as twrp is installed already, however it won't let me access it so i could do the shell commands
foliaje said:
frp lock = green color = dc phoenix
with was-lx2jc719(dload method) you boot normally but you won't recive any update because there isn't system updater, you'll need install a file explorer and keyboard
Click to expand...
Click to collapse
I watched a tutorial on dc phoenix and i saw that the update.app had cust in it...... i have 2 seperate update.app's ; one contains boot, system, etc... and one contains the Cust image...
Do you happen't to know where you can get the update.app that has both files in it?
davidhozic said:
Do you happen't to know where you can get the update.app that has both files in it?
Click to expand...
Click to collapse
sorry i don't understand very well, explain a little better please
Its fine, i already took the phone to my carrier and they'll repair it within warranty
This method worked for me
Don't worry my friend be chill, I too bricked my huawei P10 Lite Middle East Version and after a month of struggle I was finally able to fix this issue and restored my STOCK .
This video is made to help you successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
If the above video doesn't play then click on thsi link below
https://youtu.be/0vDgDXePAR4
Cheers.....
Hi XDA
I'm looking for stock Rom for my Huawei P Smart FIG-LX1.
Huawei don't propose it for this moment on his site and I can't find it anywhere.
If someone could extract it from his phone...
Another solution should be a great custom Rom but there's nothing at this time.
Thanks for the help
Hi,
For the moment I have nothing anymore on my phone...after installing custom rom, I tried to come back to stock, and unlock the phone...
And recovery by wifi or Hisense doesn't work...
Thank you all
feuillearouler said:
Hi,
For the moment I have nothing anymore on my phone...after installing custom rom, I tried to come back to stock, and unlock the phone...
And recovery by wifi or Hisense doesn't work...
Thank you all
Click to expand...
Click to collapse
Use FirmwareFinder to download the correct firmware for your device.
flibblesan said:
Use FirmwareFinder to download the correct firmware for your device.
Click to expand...
Click to collapse
Hi,
Thank you, I will look for
flibblesan said:
Use FirmwareFinder to download the correct firmware for your device.
Click to expand...
Click to collapse
FIG-LX1 is not in the list...
feuillearouler said:
FIG-LX1 is not in the list...
Click to expand...
Click to collapse
Use Common base tab, Model for find enter FIG-LX1 then click Find.
Or download from http://pro-teammt.ru/firmware-database/?firmware_model=fig-lx1&firmware_page=0
flibblesan said:
Use Common base tab, Model for find enter FIG-LX1 then click Find.
Or download from http://pro-teammt.ru/firmware-database/?firmware_model=fig-lx1&firmware_page=0
Click to expand...
Click to collapse
Thank you, I am downloading all fig-lx1 full OTA...
For the moment, I have no rom in my phone anymore...made a big mistake by relock bootloader
So I can't unlock anymore to install custom rom
I'm trying, I'm trying...
flibblesan said:
Use Common base tab, Model for find enter FIG-LX1 then click Find.
Or download from http://pro-teammt.ru/firmware-database/?firmware_model=fig-lx1&firmware_page=0
Click to expand...
Click to collapse
Hi,
Well, I have downloaded about 15 or more versions of fig-lx1... none can be installed... ever and ever same message : failled !
I tried fig-l11 and fig-l31, same issue...
Is ther another way to force flash (another than folder "dload" with update.app inside in sdcard) ?
thank you
feuillearouler said:
Hi,
Well, I have downloaded about 15 or more versions of fig-lx1... none can be installed... ever and ever same message : failled !
I tried fig-l11 and fig-l31, same issue...
Is ther another way to force flash (another than folder "dload" with update.app inside in sdcard) ?
thank you
Click to expand...
Click to collapse
Install TWRP then use this https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
flibblesan said:
Install TWRP then use this https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
I can't install TWRP as bootloader is locked and I can't unlock it (I have no system installed so, can reach developper options and unlock OEM)...
Every time I'm trying to unclok bootloader, I have
Code:
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.031s
Only things I have is bootloader locked and stock recovery....
feuillearouler said:
I can't install TWRP as bootloader is locked and I can't unlock it (I have no system installed so, can reach developper options and unlock OEM)...
Every time I'm trying to unclok bootloader, I have
Code:
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.031s
Only things I have is bootloader locked and stock recovery....
Click to expand...
Click to collapse
Ah you have big problem then, sorry. There is no solution for unlocking FRP unless you have stock rom available or have flashed TWRP.
Boot your phone into eRecovery and perform the firmware recovery.
ChinHon said:
Boot your phone into eRecovery and perform the firmware recovery.
Click to expand...
Click to collapse
Hi
Already tried .. can't download it into recovery...I have a error message
Try this installation:
https://mobiletech360.co/huawei-p-smart-figo-l31-stock-firmware-rom-android-8-oreo/
ChinHon said:
Try this installation:
https://mobiletech360.co/huawei-p-smart-figo-l31-stock-firmware-rom-android-8-oreo/
Click to expand...
Click to collapse
Well, I have tried 3 different rom...unsuccessfully...
Don't really know what to do now....
Try it with the FunkyHuawei Tool for restoring the firmware. Or HiSuite DNS.
ChinHon said:
Try it with the FunkyHuawei Tool for restoring the firmware. Or HiSuite DNS.
Click to expand...
Click to collapse
Thank you very much for trying to help me...I will try this....
ChinHon said:
Try it with the FunkyHuawei Tool for restoring the firmware. Or HiSuite DNS.
Click to expand...
Click to collapse
I can't use Hisuite DNS as I have no rom installed, I can't click on Update system...
I looked FunkyHuawei...very expansive for this phone model... EDIT : and no any firmware for fig-lx1....
Thank anymore
Study the instructions and the program settings. It works with HiSuite DNS. In conjunction with Firmwarefinder for PC, the appropriate router configuration and the eRecovery.
ChinHon said:
Study the instructions and the program settings. It works with HiSuite DNS. In conjunction with Firmwarefinder for PC, the appropriate router configuration and the eRecovery.
Click to expand...
Click to collapse
Ok, I will try tomorrow...it is too late in France
Will tell you
See u
Hi, I have a big problem with my P9 lite, i locked my phone(bootloader), i dont have any recovery and no system. Idk what to do.
K4PEL said:
Hi, I have a big problem with my P9 lite, i locked my phone(bootloader), i dont have any recovery and no system. Idk what to do.
Click to expand...
Click to collapse
How you locked the phone, via fastboot command "oem relock ....." ?
bozka1 said:
How you locked the phone, via fastboot command "oem relock ....." ?
Click to expand...
Click to collapse
no, I flash oeminfo by twrp im an idiot
K4PEL said:
no, I flash oeminfo by twrp im an idiot
Click to expand...
Click to collapse
After oeminfo changing you need unlock BL again, it's a normal procedure.
Edit: you can try install Service ROM from SD card with three buttons combo. What is your build number ?
bozka1 said:
After oeminfo changing you need unlock BL again, it's a normal procedure.
Edit: you can try install Service ROM from SD card with three buttons combo. What is your build number ?
Click to expand...
Click to collapse
yea but how unlock bl i dont have key
K4PEL said:
yea but how unlock bl i dont have key
Click to expand...
Click to collapse
You can get key again, try "HCU Client" or "DC-Unlocker" , (payment services , 4€).
bozka1 said:
You can get key again, try "HCU Client" or "DC-Unlocker" , (payment services , 4€).
Click to expand...
Click to collapse
Ok, I installed C432B160 and I want to update to B370 but when i do it says:
Software install failed!
Incompatibility with current version.
Please download the correct update package.”