Don't want to talk that much, because I've not much time.
I booted the twrp recovery from bluespark on my 6T, accidentally wiped everything and now I'm bricked. How can I recover? I can no longer boot the recovery because I get an error "downloading 'boot.img'...
OKAY [ 0.819s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.834s"
Gretting yNEX
Maybe installing twrp from adb again, download Oxygen OS full rom, transfer it to your phone and flash it?
yNEXplays said:
Don't want to talk that much, because I've not much time.
I booted the twrp recovery from bluespark on my 6T, accidentally wiped everything and now I'm bricked. How can I recover? I can no longer boot the recovery because I get an error "downloading 'boot.img'...
OKAY [ 0.819s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.834s"
Gretting yNEX
Click to expand...
Click to collapse
Hi,
had the same problem. This helps me.
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
enzzo28 said:
Maybe installing twrp from adb again, download Oxygen OS full rom, transfer it to your phone and flash it?
Click to expand...
Click to collapse
Well, I'm not planning to install (flash) TWRP. I just want to boot TWRP. But that's where the problems begin...
Camel00000 said:
Hi,
had the same problem. This helps me.
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Click to expand...
Click to collapse
Thanks for your reply. I'm wondering why I haven't seen this Post. I'm currently downloading the files and will test it. If it works... damn! I will have to thank you somehow!!
No problem, glad that i can help.
Camel00000 said:
No problem, glad that i can help.
Click to expand...
Click to collapse
Dude! You're mah boyy!
All I can say is: Welcome back among the living, OnePlus 6T! <3
yNEXplays said:
Dude! You're mah boyy!
All I can say is: Welcome back among the living, OnePlus 6T! <3
Click to expand...
Click to collapse
Bricking phone with an unlocked BL is kind of hard.
Even if you wipe the device, you should be able to recover by writing the correct files.
The only way I know of killing a phone like this, is if you can't get into the bootloader to do fastboot.
Related
OK, so I was trying to flash the Minimal Matte theme onto my N1, and I seem to have bricked the phone.
The phone now just sticks at the "X" logo when trying to boot.
I cannot access recovery - I get the exclamation mark.
I've tried download the Nexus One FRG83 system image from HTC and put it on the SD card and renamed it passimg.zip to try and get it up and running again - it did the update on the bootloader screen, but it hasn't helped.
Any ideas?
If your getting the exclamation mark, I would say the recovery has been lost somehow, and its on standard again.
Try re flashing recovery via fastboot, amon ra or clockwork, which ever one. Then re flashing whatever rom
Rellikzephyr
Sent from my Nexus One using Tapatalk
OK I've tried this and get the following
Code:
C:\AndroidSDK\tools>fastboot flash recovery d:\recovery.img
sending 'recovery' (2906 KB)... OKAY [ 0.415s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.813s
Any ideas?
ETA: I've tried several different recovery images to no avail.
tameracingdriver said:
OK I've tried this and get the following
Code:
C:\AndroidSDK\tools>fastboot flash recovery d:\recovery.img
sending 'recovery' (2906 KB)... OKAY [ 0.415s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.813s
Any ideas?
ETA: I've tried several different recovery images to no avail.
Click to expand...
Click to collapse
Did you unlock the bootloader?
Also, have you tried:
Code:
fastboot boot recovery.img
Try the nandroid back up in the recovery.
I've just unlocked the bootloader, and ran the command again and I can now get into recovery, and am now trying the CM6 ROM... so we'll see what happens...
And that has worked
Thanks very much for your help
tameracingdriver said:
And that has worked
Thanks very much for your help
Click to expand...
Click to collapse
Glad it worked out for ya ^_^
What size was the image that you've downloaded from HTC?
If it was ~5MB rather than ~90MB - you've downloaded an update, and not a full system image. That would explain why your phone wasn't working after applying it.
Jack_R1 said:
What size was the image that you've downloaded from HTC?
If it was ~5MB rather than ~90MB - you've downloaded an update, and not a full system image. That would explain why your phone wasn't working after applying it.
Click to expand...
Click to collapse
It was about 80ish Mb IIRC.
Hmm.. FRG83 Passimg.. Could you share it or a link to it?
Jack_R1 said:
Hmm.. FRG83 Passimg.. Could you share it or a link to it?
Click to expand...
Click to collapse
http://developer.htc.com/ 2nd link...
http://dl3.htc.com/RomCode/Source_and_Binaries/signed-passion-img-FRG83_0923.zip
That what you are looking for?
Yep Thanks. I'll try to see, why didn't this flash the system clean.
Hi,
i was running on MIUI 7 on Lenovo A6000 by Sourav_8434 and it was working fine.For my mistake i have updated weekly update i thought it will be normal.But after that my phone is showing a black screen.I can get in to fastboot and i have flashed twrp using 'fastboot flash recovery recovery.img' and when i tried to boot in to twrp(using fastboot flash recovery recovery.img) its giving me an error.
downloading 'boot.img'...
OKAY [ 0.715s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.756s
I have send a personal message to Sourav_8434 and he replied me with some suggestions.He told me he also got the same problem and fix this issue by flashing twrp and pressing 3 buttons same at a time(vol+,Vol-,Power button).But i have tried this several times but its not working for me.If anyone got this situation before please help me. I dont want to go to service center for this problem.
throw it out of the window.You're welcome. Sorry.coudn't help it.You should provide a bit more details
sonhg said:
thanks!
Click to expand...
Click to collapse
Follow this tutorial and first try the third method. If that doesn't work then try the second one :silly:
thanks
MASK10101012 said:
throw it out of the window.You're welcome. Sorry.coudn't help it.You should provide a bit more details
Click to expand...
Click to collapse
Hi,
i was running on MIUI 7 on Lenovo A6000 by Sourav_8434 and it was working fine.For my mistake i have updated weekly update i thought it will be normal.But after that my phone is showing a black screen.I can get in to fastboot and i have flashed twrp using 'fastboot flash recovery recovery.img' and when i tried to boot in to twrp(using fastboot flash recovery recovery.img) its giving me an error.
downloading 'boot.img'...
OKAY [ 0.715s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.756s
I have send a personal message to Sourav_8434 and he replied me with some suggestions.He told me he also got the same problem and fix this issue by flashing twrp and pressing 3 buttons same at a time(vol+,Vol-,Power button).But i have tried this several times but its not working for me.If anyone got this situation before please help me. I dont want to go to service center for this problem.
sonhg said:
Hi,
i was running on MIUI 7 on Lenovo A6000 by Sourav_8434 and it was working fine.For my mistake i have updated weekly update i thought it will be normal.But after that my phone is showing a black screen.I can get in to fastboot and i have flashed twrp using 'fastboot flash recovery recovery.img' and when i tried to boot in to twrp(using fastboot flash recovery recovery.img) its giving me an error.
downloading 'boot.img'...
OKAY [ 0.715s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.756s
I have send a personal message to Sourav_8434 and he replied me with some suggestions.He told me he also got the same problem and fix this issue by flashing twrp and pressing 3 buttons same at a time(vol+,Vol-,Power button).But i have tried this several times but its not working for me.If anyone got this situation before please help me. I dont want to go to service center for this problem.
Click to expand...
Click to collapse
My friend,this is no hard brick.sometimes this error happens because because your recovery.img file is corrupted.Check that your recovery.img is found in the cmd folder...And use command 'fastboot boot recovery.img' << this one surely will work.Otherwise,please follow my own thread where I faced an identical problem..>>http://forum.xda-developers.com/lenovo-a6000/help/problem-flashing-rom-soft-brick-t3353665 Oh,and calm down, not that serious of a problem,you wont have to go to the dreaded service center.
sonhg said:
Hi,
i was running on MIUI 7 on Lenovo A6000 by Sourav_8434 and it was working fine.For my mistake i have updated weekly update i thought it will be normal.But after that my phone is showing a black screen.I can get in to fastboot and i have flashed twrp using 'fastboot flash recovery recovery.img' and when i tried to boot in to twrp(using fastboot flash recovery recovery.img) its giving me an error.
downloading 'boot.img'...
OKAY [ 0.715s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.756s
I have send a personal message to Sourav_8434 and he replied me with some suggestions.He told me he also got the same problem and fix this issue by flashing twrp and pressing 3 buttons same at a time(vol+,Vol-,Power button).But i have tried this several times but its not working for me.If anyone got this situation before please help me. I dont want to go to service center for this problem.
Click to expand...
Click to collapse
When you can't even enter to bootloader (or fastboot), that situation is called hard brick. The problem you are facing is due to the wrong recovery version. Try this latest twrp 3.0.2 by sevenmax.
And yah, if "fastboot flash recovery recovery.img" doesn't work, then try "fastboot boot recovery.img"
sasukay said:
Follow this tutorial and first try the third method. If that doesn't work then try the second one :silly:
Click to expand...
Click to collapse
This method alsi not gud. Try this method.
https://boycracked.com/2016/02/12/e...rmware-any-android-devices-via-fastboot-mode/
I did it & saved from hardbrick. Just do whatever files u have. But dont forget ti erase boot. Erase boot then flash boot* this is main step. Then flash twrp and instll any backup or new rom.
Follow these instruction.... main files are in stock firmware file. Recovery alone flash ur own custom recovery of ur choice
rule breaker sarath said:
This method alsi not gud. Try this method.
https://boycracked.com/2016/02/12/e...rmware-any-android-devices-via-fastboot-mode/
I did it & saved from hardbrick. Just do whatever files u have. But dont forget ti erase boot. Erase boot then flash boot* this is main step. Then flash twrp and instll any backup or new rom.
Click to expand...
Click to collapse
Bhai, This method is for soft- bricked device, when you can enter bootloader.
In case of hard brick you can' t even enter in bootloader, and can't run these commands. The link I posted is for hard bricked devices.
And, you don't actually need to go through these complicated steps in case of soft brick.
Just flash any recovery through bootloader and then flash any ROM. You don't need to extract and flash each file separately.
hi, i need a working TWRP for my lenovo vibe p1 pro, when i try to boot a couple TWRP i found on internet the ADB software gives me that message:
C:\adb>fastboot boot recovery_twrp.img
downloading 'boot.img'...
OKAY [ 0.993s]
booting...
FAILED (status read failed (Too many links))
finished. total time: 1.518s
what is the meaning of that messange? hope the thread is opened if the right section... it's my first time here... ^^"
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
Starchm said:
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
Click to expand...
Click to collapse
i've seen this post, i've downloaded the rom "*SQL.zip"
i've opened the zip file and then booted the "recovery_TWRP.img" file in the zip file and that error were generated...
y0ur5h4d0w said:
i've seen this post, i've downloaded the rom "*SQL.zip"
i've opened the zip file and then booted the "recovery_TWRP.img" file in the zip file and that error were generated...
Click to expand...
Click to collapse
Tried with qfil?
Starchm said:
Tried with qfil?
Click to expand...
Click to collapse
to be honest no, the only way i'm looking for a bootable TWRP.img is because i don't want to lose all the data, but if it is the only way to root i'll try with QFIL ^^"
y0ur5h4d0w said:
to be honest no, the only way i'm looking for a bootable TWRP.img is because i don't want to lose all the data, but if it is the only way to root i'll try with QFIL ^^"
Click to expand...
Click to collapse
I didnt tried any other way, cuz it is easiest. But for the first root its need i think.
Starchm said:
I didnt tried any other way, cuz it is easiest. But for the first root its need i think.
Click to expand...
Click to collapse
ok... if it's the only way i'll try, if i flash the TWRP.img file, will it work and replace only the recovery or do i have to flash the whole rom?
y0ur5h4d0w said:
ok... if it's the only way i'll try, if i flash the TWRP.img file, will it work and replace only the recovery or do i have to flash the whole rom?
Click to expand...
Click to collapse
Update to the last rom s288 and u cna flash only the twrp
Starchm said:
Update to the last rom s288 and u cna flash only the twrp
Click to expand...
Click to collapse
i'm kinda new to flashes and stuff like that... my version is already the s288 ROW, so how do i flash the TWRP via QFIL?
y0ur5h4d0w said:
i'm kinda new to flashes and stuff like that... my version is already the s288 ROW, so how do i flash the TWRP via QFIL?
Click to expand...
Click to collapse
Yes use the guide in a42 root thread
Starchm said:
Yes use the guide in a42 root thread
Click to expand...
Click to collapse
if i put on the QFIL the recovery_TWRP.img file and flash it in, will i keep all the personal data?
y0ur5h4d0w said:
if i put on the QFIL the recovery_TWRP.img file and flash it in, will i keep all the personal data?
Click to expand...
Click to collapse
I thinl yes but not 100%
Starchm said:
I thinl yes but not 100%
Click to expand...
Click to collapse
ok i'll try thank you so much!! :good:
Hello everyone,
Me as well, I'm trying to have my Lenovo vibe P1C72 MM enhanced with TWRP image (which is twrp_recovery3.0.2.0.img). But unfortunately I keep getting this error message:
"target reported max download size of 268435456 bytes
sending 'recovery' (29546 KB)...
OKAY [ 0.938s]
writing 'recovery'...
FAILED (remote: invalid signature and data)
finished. total time: 1.156s"
Any ideas out there what hinders me?
Target leading answers very welcome ...
Einback
P.S.: I tried QFIL with "P1a42_S288_160721_ROW_RAW_QFIL" before, but "Sahara failed. Value cannot be zero" keeps showing - despite my patiently waiting and trying for undefined times.
im with p1 c72 but no mather how much times i flaah recovery with fastboot or qfil only the stock stays
niteone said:
im with p1 c72 but no mather how much times i flaah recovery with fastboot or qfil only the stock stays
Click to expand...
Click to collapse
Did u read my guide?
Hi XDA Community,
I'm in a bit of a pickle. Yesterday my Zenfone started to bootloop and I tried to reset to fabric settings in bootmode but it didn't do anything. Afterwards I put the stockrom (Lollipop) and the latest rom (Marshmallow) and installed them. No errors, but it is stuck in bootloop and I can only enter fastboot mode now and it gets stuck there.
Tried Intel SoC solution, no results and also QFil but it isn't shown under ports.
How can I unbrick it?
Thank you very much.
The way I did it
If you install the latest version of twrp it should automatically boot correctly as if nothing happened. it's strange, but every brick I have had has been fixed that way.
utahja1 said:
If you install the latest version of twrp it should automatically boot correctly as if nothing happened. it's strange, but every brick I have had has been fixed that way.
Click to expand...
Click to collapse
Tried it.
This is the error that it gives me.
g:\adb and recovery>fastboot boot twrp-3.1.1-0-Z00T.img
downloading 'boot.img'...
OKAY [ 0.944s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.953s
So, I finally managed to install the latest version of TWRP and SuperSU (don't know which version, tried two of them and thee TWRP install and finally one of the stuck).
I tried back2stock with 1.14 and 1.17 firmware, but the same problem happened. Bootloop and bootloop, on and on and on. The curious thing is that I didn't encounter any error message during installations so what could be the problem. Is there a log I can see to disover what could be the solution.
Thank you.
adriantamas said:
Tried it.
This is the error that it gives me.
g:\adb and recovery>fastboot boot twrp-3.1.1-0-Z00T.img
downloading 'boot.img'...
OKAY [ 0.944s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.953s
Click to expand...
Click to collapse
my h872 is brick,even though the download mode and system,now i can only boot into the fastboot,how can i get my phone work?
i have tried fastboot flash command to flash boot or recovery ,etc,it always show:
sending 'bootloader'
ok,
target reported max download size of 536870912 bytes
sending 'laf' (29916 KB)...
OKAY [ 1.029s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 1.050s
might my drives is not proper? i have change the usb point or another device,it always is this...
小阿瑟 said:
my h872 is brick,even though the download mode and system,now i can only boot into the fastboot,how can i get my phone work?
i have tried fastboot flash command to flash boot or recovery ,etc,it always show:
sending 'bootloader'
ok,
target reported max download size of 536870912 bytes
sending 'laf' (29916 KB)...
OKAY [ 1.029s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 1.050s
might my drives is not proper? i have change the usb point or another device,it always is this...
Click to expand...
Click to collapse
How'd you get here? (Your phone bricked)
christopherrrg said:
How'd you get here? (Your phone bricked)
Click to expand...
Click to collapse
i use the twrp flash a wrong recover or maybe wrong root？mostly it is ，
小阿瑟 said:
i use the twrp flash a wrong recover or maybe wrong root？mostly it is ，
Click to expand...
Click to collapse
I just asked because the logs show that your LAF partition isn't flashing and from what I've been reading so far about the LAF partition is that it is a very fragile thing.
Have you tried a factory kdz with LGUP?
christopherrrg said:
I just asked because the logs show that your LAF partition isn't flashing and from what I've been reading so far about the LAF partition is that it is a very fragile thing.
Have you tried a factory kdz with LGUP?
Click to expand...
Click to collapse
what a amazing ! i got another‘s help,now i can boot into the twrp,
but after i install the AospExtended, it just play the aex booting video,how many times i erase all date include system and date,cache,etc.
now ,iwant to konw how to get it into a system
Find stock.kdz to flash using LGUP, reflash TWRP using fast boot commands. Should boot correctly after stock .kdz is applied. Once confirmed your phone works correctly.. Boot into TWRP factory reset, and wipe partition, then attempt to flash your choice of custom ROM.
小阿瑟 said:
what a amazing ! i got another‘s help,now i can boot into the twrp,
but after i install the AospExtended, it just play the aex booting video,how many times i erase all date include system and date,cache,etc.
now ,iwant to konw how to get it into a system
Click to expand...
Click to collapse
Hi mate,
I got into the same problem as u did, i hope you solved your problem by now. Will share to me how you solve it?
Did u flash twrp via fastboot? If u do, can you share to me the command u used?
Thanks alot for your help.
spaceantz said:
Hi mate,
I got into the same problem as u did, i hope you solved your problem by now. Will share to me how you solve it?
Did u flash twrp via fastboot? If u do, can you share to me the command u used?
Thanks alot for your help.
Click to expand...
Click to collapse
Download mode via holding VOL+ and plug in GOOD USB-C cable into Windows 10 laptop/desktop with LG USB drivers, Uppercut, LGUP installed. Then KDZ 10E image to bring back to stock Nougat (losing all root, data, and it'll force encryption): http://firmware-up.com/system/files/basicpr/8d0e1fc8/H87210e_00_0322.kdz
LG G6 H872 stucked in Download mode with 5 dots
My phone LG G6 H872 got stucked in download mode with 5 dots in the process of getting it rooted, pls anyone with information on how to get it out of this should pls help. you can mail me direct on [email protected]