Related
Does anyone know if Viper is working on Nougat?
ShaunWinSC said:
Does anyone know if Viper is working on Nougat?
Click to expand...
Click to collapse
Working great, check out WETA.
BewareAlbatross said:
Working great, check out WETA.
Click to expand...
Click to collapse
Thanks, I was looking to use with stock.
Are you running WETA? How is it?
Working great on stock. Using Arise Numbers with Dolby Atmos.
ShaunWinSC said:
Thanks, I was looking to use with stock.
Are you running WETA? How is it?
Click to expand...
Click to collapse
I've been running WETA and so far its running great. It has an aroma installer that lets you install the mods that you want and leave off the ones you don't so you can keep it close to stock.
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
I'm not familiar with Arise
ShaunWinSC said:
Thanks, I was looking to use with stock.
Are you running WETA? How is it?
Click to expand...
Click to collapse
This.
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
And this.
I prefer running using Magisk v6 with the viper4 addon but Numbers is excellent as well, just waiting for WETA to support Magisk a little more cleanly before I head back to it. But if you don't use Android Pay or similar or for some other reason care about Magisk then WETA will get you up and running REALLY quickly with a great Nougat build. And it works fine with Magisk to a great extent, just a couple minor picayunes that I'm hoping will go away with time.:good:
Arise is basically Viper with Dolby Atmos. Tbh Viper is too much for me, as long as Dolby is working on stock N that has enough of an effect ,'m good to go But if you look back in the Arise thread, maybe back a week or so, i made a post saying that I finally got Viper/Dolby including SPEAKER See Speaker was something I was struggling to get to work on stock N with things like Spotify, play music, YouTube, even notifications, and some other things... basically every sound that comes out of the speakers except phone calls, unless it was via Bluetooth. Bluetooth was working overall, headphones were working overall and I even somehow found out locally stored music was working with speaker, but not those other things I had previously mentioned, was so weird. And of course it made it even more confusing bec some N users were saying it was fully working and others were in my situation.
That was until I found a post by user @SixFourSix he said to add/edit this certain file in system/etc . I went ahead and did that and after weeks of struggling, I had finally figured it out thanks to his tip. Everything was working with Viper and Atmos, those things I mentioned, except for one thing, phone calls, with Bluetooth I'm pretty sure it has an effect, but anything else with calls, for some reason, no. Don't know why. And I hadn't seen anyone comment on why. Maybe Arise isn't supposed to do that.
Yeah so go back to my posts in the Arise thread if you'd like, you'll see exactly what I mean.
Good luck
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
Just flash the numbers zip in recovery and that is all you have to do?
d1ez3 said:
Just flash the numbers zip in recovery and that is all you have to do?
Click to expand...
Click to collapse
Can you provide a link to numbers, I'm having trouble finding it. :good:
ShaunWinSC said:
Can you provide a link to numbers, I'm having trouble finding it. :good:
Click to expand...
Click to collapse
I couldn't either I had to post in their thread, it's here
https://www.androidfilehost.com/?w=files&flid=108832
d1ez3 said:
I couldn't either I had to post in their thread, it's here
https://www.androidfilehost.com/?w=files&flid=108832
Click to expand...
Click to collapse
Are you running this with stock N? Everything work ok?
ShaunWinSC said:
Are you running this with stock N? Everything work ok?
Click to expand...
Click to collapse
Just did a second ago. Everything working perfectly. It looks like it flashes 3 apps. I used the Viper atmos one and it is working for me. I installed busybox too. I also flashed EX kernel today earlier, not sure if that matters
d1ez3 said:
Just did a second ago. Everything working perfectly. It looks like it flashes 3 apps. I used the Viper atmos one and it is working for me. I installed busybox too. I also flashed EX kernel today earlier, not sure if that matters
Click to expand...
Click to collapse
I'll have to give it a try. Now to wait for Xposed.
ShaunWinSC said:
Can you provide a link to numbers, I'm having trouble finding it. :good:
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click androidfilehost and you will find Numbers as a folder.
BewareAlbatross said:
This.
And this.
I prefer running using Magisk v6 with the viper4 addon but Numbers is excellent as well, just waiting for WETA to support Magisk a little more cleanly before I head back to it. But if you don't use Android Pay or similar or for some other reason care about Magisk then WETA will get you up and running REALLY quickly with a great Nougat build. And it works fine with Magisk to a great extent, just a couple minor picayunes that I'm hoping will go away with time.:good:
Click to expand...
Click to collapse
I'm trying to get Viper to work with Magisk,
I tried the zip from the magisk modules thread but it's asking me to install drivers at launch (which I didn't). Also tried selinux to permissive and force v4a, but didn't get it to process the audio. I also freezed music fx, but still wasn't getting anything.
I was running a song from SoundCloud to see if v4a was working
How did you manage to make it work with Magisk
Sent from my Nexus 6P
Picayune! Great word!!
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
i have stock android 7
flashed dolby atmos but not working
where to find working one?
rowihel2012 said:
i have stock android 7
flashed dolby atmos but not working
where to find working one?
Click to expand...
Click to collapse
Change Selinux?
Sent from my Nexus 6P using XDA-Developers mobile app
Hey everyone! I am new here and not really experienced, that's why i really need your help with the following:
I've rooted my device with TWRP & Magisk (by following this guide: https://www.youtube.com/watch?v=WbFDv8Ii7PM)
Everything went smooth without any problems.
After that I tried to install Viper4android and that's where the trouble starts.
(I followed this guide to install Viper4android: https://forum.xda-developers.com/galaxy-s8+/how-to/root-install-viper-android-galaxy-s8-s8-t3596933)
Now I do have it installed but any media sounds do not work at all on any app with or without headphones.
Rebooting or factory resetting does nothing.
My guess that it's something with audio_effects.conf or soundAlive_51 but can't know for sure.
Please help a desperate soul out :fingers-crossed:
Edit1: Interesting... media sounds works if i listen to music via chrome for example, also it seems that it works with games and audio files that are locally on the device, so basically sound doesnt work with youtube and spotify (the ones that actually matter) help?
...
what a nice helpful people here... smh
I'm having the same issue I think. Tried to flash viper, but it didn't work, so I re-enabled soundalive. It has been working fine for several weeks, but suddenly media sounds have stopped. I still get text message alerts etc, but no sound using youtube, or VLC media player playing local files. If you find a solution, please post it.
Media sound not work
Any solutions please?
I have same problem with media sound not work.
jkmaxfli said:
Any solutions please?
I have same problem with media sound not work.
Click to expand...
Click to collapse
Fixed this yet?
callumbr1 said:
Fixed this yet?
Click to expand...
Click to collapse
No, nothing fixed.
With which I should solve the problem ?
I have nothing help this time.
jkmaxfli said:
No, nothing fixed.
With which I should solve the problem ?
I have nothing help this time.
Click to expand...
Click to collapse
You flashed a broken version of viper. Your android version 7.0? And you use magisk?
callumbr1 said:
You flashed a broken version of viper. Your android version 7.0? And you use magisk?
Click to expand...
Click to collapse
Yes.
My android version 7.0
I use Magisk
I have Renovation Ice 5.1 ROM and TWRP
Galaxy S8+ Exynos - G855F
jkmaxfli said:
Yes.
My android version 7.0
I use Magisk
I have Renovation Ice 5.1 ROM and TWRP
Galaxy S8+ Exynos - G855F
Click to expand...
Click to collapse
Then delete your currently installed version, also delete any viper mods from magisk.
Reboot then flash this
https://mega.nz/#!CV5wQYSa!i-V1UvJ_Lh9YoZDPN9rUUXuJNgXWcXRlhBE83fYH7e8
callumbr1 said:
Then delete your currently installed version, also delete any viper mods from magisk.
Reboot then flash this
https://mega.nz/#!CV5wQYSa!i-V1UvJ_Lh9YoZDPN9rUUXuJNgXWcXRlhBE83fYH7e8
Click to expand...
Click to collapse
Install this download and nothing more ?
And it will V4A work ?
I have only two modules in magisk like:
Youtube hi resolution and stereo speaker mod
jkmaxfli said:
Install this download and nothing more ?
And it will V4A work ?
I have only two modules in magisk like:
Youtube hi resolution and stereo speaker mod
Click to expand...
Click to collapse
Remove stereo speaker mod and flash the zip through twrp. Then it should work
callumbr1 said:
Remove stereo speaker mod and flash the zip through twrp. Then it should work
Click to expand...
Click to collapse
Great bro, its working still over stereo mode in magisk.
V4A working now.
But I dont know setup in V4A for loud sound
jkmaxfli said:
Great bro, its working still over stereo mode in magisk.
V4A working now.
But I dont know setup in V4A for loud sound
Click to expand...
Click to collapse
Good. Thank the posts please bro.
You want loud volume through speakers or headphones?
callumbr1 said:
Good. Thank the posts please bro.
You want loud volume through speakers or headphones?
Click to expand...
Click to collapse
Through speakers
jkmaxfli said:
Through speakers
Click to expand...
Click to collapse
Try this setting
callumbr1 said:
Try this setting
Click to expand...
Click to collapse
If I set only this and turn on Nothing will change
jkmaxfli said:
If I set only this and turn on Nothing will change
Click to expand...
Click to collapse
Play with the settings till you get what you need
callumbr1 said:
Play with the settings till you get what you need
Click to expand...
Click to collapse
Small increase in volume I feel ( only in master power option) but it's nothing extreme. I expected more.
jkmaxfli said:
Small increase in volume I feel ( only in master power option) but it's nothing extreme. I expected more.
Click to expand...
Click to collapse
Works best with headphones mate unless you have a portable speaker or something similar
Any one got it running ? I tried magisk but there is no difference in sounds
xxqxpxx said:
Any one got it running ? I tried magisk but there is no difference in sounds
Click to expand...
Click to collapse
Magisk viper is systemless that means no app but Idk how to change its settings (didnt try on mia1 as its not rooted but observed it on rn3)
Sent from my Mi A1 using Tapatalk
No there is an app
xxqxpxx said:
Any one got it running ? I tried magisk but there is no difference in sounds
Click to expand...
Click to collapse
Go to magisk and install "Viper4android FX for Magisk15" It work for me
Polluktus said:
Go to magisk and install "Viper4android FX for Magisk15" It work for me
Click to expand...
Click to collapse
Tried it , in log it says may not work because of encryption then after reboot the whole magsik doesn't work
xxqxpxx said:
No there is an app
Click to expand...
Click to collapse
Ik there's an app but you're talking about magisk module of viper right? Its systemless i.e works without app but eve Idk how...
Sent from my Mi A1 using Tapatalk
0_RoXoR_0 said:
Ik there's an app but you're talking about magisk module of viper right? Its systemless i.e works without app but eve Idk how...
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
it's really confusing
xxqxpxx said:
Tried it , in log it says may not work because of encryption then after reboot the whole magsik doesn't work
Click to expand...
Click to collapse
Download SELinux Switch and select permissive
Polluktus said:
Download SELinux Switch and select permissive
Click to expand...
Click to collapse
it didn't work , i already have a selinux module for magisk
xxqxpxx said:
No there is an app
Click to expand...
Click to collapse
what i see in the screenshot, master power is disable/uncheck, is it same if u enable it ?
ace_id said:
what i see in the screenshot, master power is disable/uncheck, is it same if u enable it ?
Click to expand...
Click to collapse
yes . i tried everything . i already have some saved profiles and even them won't load
I have Viper4Android FX for Magisk v15 (v. 5.2) installed and works just fine, no problems at all.
NITRO_100 said:
I have Viper4Android FX for Magisk v15 (v. 5.2) installed and works just fine, no problems at all.
Click to expand...
Click to collapse
do u have selinux or some mod that makes it work ?
NITRO_100 said:
I have Viper4Android FX for Magisk v15 (v. 5.2) installed and works just fine, no problems at all.
Click to expand...
Click to collapse
i've v15.3 and this is the log when i install it
xxqxpxx said:
do u have selinux or some mod that makes it work ?
Click to expand...
Click to collapse
Oh yes, I have that permissive selinux module for camera, don't know if that's affecting Viper4Android or not.
NITRO_100 said:
Oh yes, I have that permissive selinux module for camera, don't know if that's affecting Viper4Android or not.
Click to expand...
Click to collapse
i have it too , i think it may be in magisk version as it's the only difference. i tried every v4a in magisk and non of them is working . the best i could get to is the app installed and i can tweak it and the drivers status says it's enabled but there is no difference in sounds
xxqxpxx said:
i have it too , i think it may be in magisk version as it's the only difference. i tried every v4a in magisk and non of them is working . the best i could get to is the app installed and i can tweak it and the drivers status says it's enabled but there is no difference in sounds
Click to expand...
Click to collapse
I'm on Magisk 15.3, maybe some other module/tweak is interfering with V4A ?
There is no difference when you turn master power on and make some changes in phone speaker/headset/bluettoth device ?
NITRO_100 said:
I'm on Magisk 15.3, maybe some other module/tweak is interfering with V4A ?
There is no difference when you turn master power on and make some changes in phone speaker/headset/bluettoth device ?
Click to expand...
Click to collapse
Those all the mods i have
xxqxpxx said:
Those all the mods i have
Click to expand...
Click to collapse
Well you have some other audio mods, try to uncheck all and leave only V4A and see if it's going to work.
NITRO_100 said:
Well you have some other audio mods, try to uncheck all and leave only V4A and see if it's going to work.
Click to expand...
Click to collapse
i'll do that now , do you install the app from else where or it's installed ? also do you have your system encrypted ?
Hi,
Anyone got Viper4Audio working in magisk ? Compatible or driver mode ?Does it work with Youtube too ?
Thanks
GryTEcHoG said:
Hi,
Anyone got Viper4Audio working in magisk ? Compatible or driver mode ?Does it work with Youtube too ?
Thanks
Click to expand...
Click to collapse
Yes, go to magisk downloads and download n install v4a by shady squirrel. It works like a charm
yuvatheja said:
Yes, go to magisk downloads and download n install v4a by shady squirrel. It works like a charm
Click to expand...
Click to collapse
Got it working already, had some trouble because it was not working with youtube properly but worked with other players.
Dolby for pie Rooms...plz confirm if working in oos...I flashed it in my one plus 6t, flashing was successful but no icon in drawer..
Is this magisk flashable?
noobiedev83 said:
Is this magisk flashable?
Click to expand...
Click to collapse
I flash on twrp
Why not use this: https://forum.xda-developers.com/android/software/mm-p-dolby-digital-plus-arise-20181115-t3868192
iaTa said:
Why not use this: https://forum.xda-developers.com/android/software/mm-p-dolby-digital-plus-arise-20181115-t3868192
Click to expand...
Click to collapse
This module works fine along with v4a for me. Also have audio modification library installed.
noobiedev83 said:
Is this magisk flashable?
Click to expand...
Click to collapse
Both...twrp and magisk
zplit said:
I flash on twrp
Click to expand...
Click to collapse
Wats the result..is it working??
https://forum.xda-developers.com/oneplus-6t/themes/dolby-digital-plus-arise-oneplus-6t-t3872785
U guys know that other Dolby that works only makes the volume louder. It does not process like Dolby actually does..
jacksummers said:
U guys know that other Dolby that works only makes the volume louder. It does not process like Dolby actually does..
Click to expand...
Click to collapse
Had the same impression..so uninstalled it and use viper instead
Try this workig on one plus 6
https://youtu.be/SJcA9OeSc_Y
GuestK00177 said:
U guys know that other Dolby that works only makes the volume louder. It does not process like Dolby actually does..
Click to expand...
Click to collapse
felek73 said:
Had the same impression..so uninstalled it and use viper instead
Click to expand...
Click to collapse
Dolby working properly changes the soundscape and equalizer settings. So in a sense, it changes the volume, but in very discrete ways in different bands.