Hello, my english is unfortunately not very good, so I translated with Google Translate.
I wanted to root my phone (Huawei Nova Can-L11) and used this guide.
https://forum.xda-developers.com/nova-plus/development/recovery-unofficial-twrp-huawei-nova-t3523473 .However, I have installed a wrong image or something go wrong .
Now the mobile always starts again, about 3 seconds. I briefly see the Huawei logo, and then the orange font that is not trusted.
The problem I had yesterday, but it somehow managed to close the OEM again, and the mobile ran normally.
It was with the power button and soft key, but this is probably no more.
Now I wanted to install the correct image, unlock oem and the error is back. But I can not come back. Adb and Fastboot find no device, and the PC is not synonymous displayed.
Maybe I'm too nervous for the key combination because it worked yesterday. But I'm just scared.
If my PC would display the mobile, I could possibly with fastboot go back to lock oem. But it does not indicate anything ..
Ask for help, I hope I have not completely destroyed it.
hi! i have bricked Nova Plus, after factory reset in TWRP. i use all method flash fiirmware - tel is bricked. i bay credit in DC Phoenix (15 evro) and download fullflash firmware. after flashing and factory reset,phone is boot sussec. after full boot i flash firmware from hwmt. after flashing run factory reset- boot- tel is fully working!
always wait for 10-15 minutes after a flash/reboot...it takes some time...IF after 15 minutes its still on phone booting well...youre in bootloop
Hi, I tried to install crDroid ROM on my Huawei y5 2017 and bricked it.
Now, it only boots at TWRP and fastboot.
I had nandroid backup but it didn't work.
I tried flashing RR and miui ROM , but didn't work.
Please provide me the stock ROM of huawei y5 2017 MYA-L22. This is a newly bought phone and I don't want to lose it. Please help me??????
HUAWEI Y5 2017 Bricked
kkboss said:
Hi, I tried to install crDroid ROM on my Huawei y5 2017 and bricked it.
Now, it only boots at TWRP and fastboot.
I had nandroid backup but it didn't work.
I tried flashing RR and miui ROM , but didn't work.
Please provide me the stock ROM of huawei y5 2017 MYA-L22. This is a newly bought phone and I don't want to lose it. Please help me
Click to expand...
Click to collapse
Same here!
I think crDroid ROM reformatted the Boot partition as f2fs and everything fails from here in.
I need urgent help too
I've tried everything I can find on the net
BTW mine has an unlocked bootloader
enviro8 said:
Same here!
I think crDroid ROM reformatted the Boot partition as f2fs and everything fails from here in.
I need urgent help too
I've tried everything I can find on the net
BTW mine has an unlocked bootloader
Click to expand...
Click to collapse
I have TWRP also but nandroid backup didn't work. Can you provide me stock recovery?
When you do a restore do you get a message that says something like: 'Warning:this data backup was made with f2fs file system. The backup may not boot unless you change it to f2fs."?
Mine did, but I modified the back up data files to ext4 and change the data file system to ext4 in TWRP.
But I still had to do the 3 button method to get it to finally boot.
I got lucky and managed to get my Y5 2017 going by holding down volume up and volume down keys until it finally booted up.
However, as I was trying everything I am not sure of what stage I did this, after it rebooted into TWRP or after EMUI download screen came up or after the bootloader unlocked warning screen, etc.
I will try to replicate the actions when I feel a bit braver.
I have found a stock firmware (I think). It can be downloaded from:
http://combinefile.com/home/browse/...w_Official_Firmware_Flash_File_By_Combinefile
It has several upgrade methods:
OTA upgrade
SD Card upgrade
USB upgrade
Upgrade tools&drivers
Download and keep unzipping
Under SD Card upgrade you will find UPDATE.APP
This is the one that the next two youtube methods use
How To Flash Huawei Dlord(UPDATE.APP) In Fastboot Mode
https://www.youtube.com/watch?v=OKRTbv-6Kzc
Using Update.app to load firmware
https://www.youtube.com/watch?v=Rhru9rCA8-8
There are some other ways to do it listed in the file, but I am not sufficiently confident as yet.
Good Luck
Hi. I am also needing a Huawei Y5 (2017) Stock Rom [MYA-L02].
But before thinking about flashing, I must get past the "Bootloader unlocked" message screen at startup (The screen with orange texts and (1) (2) (3) options below.)
Currently, the phone does not boot even when it says "The phone is booting now..." It just restarts, and repeats the same again. I can't boot to erecovery with VolUp button because I had it overwritten with TWRP (corrupted perhaps), and I can't go to fastboot with Power+VolDown buttons for some reason. Basically, I cannot do anything with hardware keys. Without seeing the Huawei boot animation, PC commands in adb console are useless too.
I can't even turn the device off with Power button. I cannot remove the battery pack because I'm afraid I may lose warranty (a sticker is atop of the battery which cannot be tampered).
My last option is to let the battery drain and try the hardware keys again.
With this, I am requesting assistance from you developers.
It may not help but it worked on mine.
Where ever you are, push in and hold in the power button for quite a long time to turn it off.
enviro8 said:
I got lucky and managed to get my Y5 2017 going by holding down volume up and volume down keys until it finally booted up.
However, as I was trying everything I am not sure of what stage I did this, after it rebooted into TWRP or after EMUI download screen came up or after the bootloader unlocked warning screen, etc.
...
Good Luck
Click to expand...
Click to collapse
Are you confirming Y5 2017 can run custom ROM like EMUI ?
ar_156 said:
Are you confirming Y5 2017 can run custom ROM like EMUI ?
Click to expand...
Click to collapse
Emui is the Huawei framework and not a custom ROM. I think your getting confused with MIUI which is available as custom ROM for some phone.
There are no custom time available for our phone that I know of, but it can be rooted and with the use of TWRP, Magisk and Xposed the stock ROM can be customized.
ar_156 said:
Are you confirming Y5 2017 can run custom ROM like EMUI ?
Click to expand...
Click to collapse
No. the EMUI allows updates to be downloaded and installed via update.app. However if the base unit is unlocked and/or rooted the download fails.
The other choices offered in the EMUI screen are reboot and turn off.
Importance of getting up this screen is that you can communicate between the phone and a PC via ADB and FASTBOOT while in it, This permits the major ROM elements to be flashed to the phone ROM and unbrick it. The 3 elements are system.img, boot.img and recovery.img.
Additionally, if you can turn off the phone from the EMUI screen, you can directly enter FASTBOOT and flash the img files to the ROM.
You can extract system.img, boot.img and recovery.img from a stock update.app file and when flashed the phone will reboot into the way it was as new (depending on what the update.app version is)
To force the phone into the EMUI screen I did the following:
At the unlocked warning screen I held the Vol up and down buttons firmly for around 30 - 40 seconds and when the warning screen comes up release the Vol up and keep holding down the Vol down button. The unit will cycle a number of times and the EMUI screen should come up.
If the phone is off, you can go directly to FASTBOOT simply by holding down the Vol down button and the connect the phone to you PC via the USB cable.
To do this you need to install HUAWEI drivers and to get ADB and FASTBOOT.
If you get this far, I can guide you the rest of the way but you must be able to get to the EMUI screen and/or turn the phone off.
It is a bit of a tedious method, though it works and puts you back into an unrooted stock ROM.
However I still am unable to relock the phone.
BTW FASTBOOT can be used to load the TWRP recovery on the phone.
Additionally, the HUAWEI Y5 2017 phone has the following aliases - MYA-L02, MYA-L03, MYA-L22 and MYS-L23 and MYA is often termed MAYA.
Are these fake?
MIUI 9Pro (port) v7.12.7 for Y5 (2017): https://4pda.ru/forum/index.php?showtopic=823938&st=600#entry67801731
CrDroidAndroid (port) 7.1.2 for Y5 (2017): https://4pda.ru/forum/index.php?showtopic=823938&st=600#entry67802080
ar_156 said:
Are these fake?
MIUI 9Pro (port) v7.12.7 for Y5 (2017): https://4pda.ru/forum/index.php?showtopic=823938&st=600#entry67801731
CrDroidAndroid (port) 7.1.2 for Y5 (2017): https://4pda.ru/forum/index.php?showtopic=823938&st=600#entry67802080
Click to expand...
Click to collapse
Unfortunately I can't read Russian. Anybody here can translate?
BETA VERSION CrDroidAndroid (port) based on Android 7.1.2
as changes are made this post will be updated
Source, link to the donor with description and pictures <-
Port spread "as is" solely for the purposes of familiarization and possible revision by enthusiasts.
Backup is mandatory.
Everything you do with your device you do at your own peril and risk! Responsibility for the breakdown, loss of data and other consequences I can not bear.
What changes in the donor:
#
Kernel:
* Replaced Kernel-image from the firmware C10B125
* Fixed fstab.mt6735 to mount the "Data" section . we have f2fs, not ext4
* Corrected init.mt6735.rc and init.project.rc sections #Camera - values taken from C10B125 firmware
* Forced Permissive, encryption disabled, Secureboot disabled .
* Replaced the boot logo, which is without the yellow letters.
System:
* Replaced system \ etc \ trustzone.bin for the stock from the firmware C10B125
* Replaced the contents of the folder system \ etc \ firmware to the stock from the firmware C10B125 (firewood from wireless modules)
* Replaced the contents of the folder system \ etc \ mddb to the stock from the firmware C10B125 (network calibration, etc.)
* Replaced bootanimation \ system \ media \ bootanimation.zip
* Edited buil.prop - almost everywhere now it displays MYA-L22, and so Also introduced some "tweaks"
* Edited system \ usr \ keylayout \ mtk-kpd.kl the line "key 485 SMARTKEY" was replaced by "key 485 MEDIA_PLAY_PAUSE" (to enable the smart button)
* The binaries and the library of the GPS module were changed: system \ xbin \ BGW, mnld system \ lib \ libmnl.so
* The installer contains the patch "FIX NVRAM" - corrects the WiFi error on the Ciagency-based OS
* Replaced libraries for the camera, are taken from the firmware C10B125.
List (most likely some of them are superfluous, but once it works, then ..):
What works:
#
+ Led-indication (LED) works both on the drain (green / red)
+ SMS receives and sends.
+ 2 / 3G catches including mobile Internet.
+ GPS works.
+ WiFi (including as an access point).
+ BT with my clock synchronized and files transferred.
+ FM radio-works (in any case, hisses)))
+ Various multimedia
+ Standard browser works
+ 2x window mode works
+ For those who care about it - Combining drives, checked-works.
+ LiveDispley - night mode, read mode, blue filter no matter how the review, in general it works and almost without animation brakes.
+ Additional button - works
+ Camera. As it should be 8mp rear, 5mp front, both flashes, does not blush, does not green, photos are saved, the video is removed, autofocus plows.
+ Engineering menu-works, call through the utility.
+ Compass (patch below)
+ System ROOT - activate and control access in the "for developers" menu / in Beta2 SuperSu is used .
+ Google Playmarket - of all gaps the current it. So it was at the source and it suits me. All the rest download through the market.
At the moment, the main glitches and flaws:
#
* Beta2 - WiFi does not work immediately after installation. It is treated with a patch on the compass! (ie one patch will fix both)
* Connecting and using the bluetooth headset causes terrible brakes
* Some videos on YouTube (via the application) break up into squares. Through the browser, everything loses normally. I'm using Tubemate and everything is ok.
-all the rest in your feedbacks
Installation:
#
As zip-installer through TWRP, preliminary making wipe dalvick, cache, system, data . Ideally, internal memory is also desirable.
Download (Yandex disk) <-
Download Beta2 (Yandex disk) <-
Additionally:
#
Patches, install through TWRP. After installing the system and first downloading it , as needed.
If the error when turning WiFi on (nvram warning err = x10) is set to <-
If the compass does not plow and WiFi does not turn on in beta2, set it <- Separate patch to camera <-
ar_156 said:
Are these fake?
MIUI 9Pro (port) v7.12.7 for Y5 (2017): https://4pda.ru/forum/index.php?showtopic=823938&st=600#entry67801731
CrDroidAndroid (port) 7.1.2 for Y5 (2017): https://4pda.ru/forum/index.php?showtopic=823938&st=600#entry67802080
Click to expand...
Click to collapse
no they are real , i have installed MIUI 9Pro and works well
Aleko91 said:
no they are real , i have installed MIUI 9Pro and works well
Click to expand...
Click to collapse
I installed CRDroid through TWRP and it bricked my Y5 several times.
This has been reported on several forums as happening by a number of users
On reboot it cycles between the unlocked warning and a screen stating that the storage is locked and to enter an unlock password.
When a password is entered that looks correct, it states that the password was correct but the action was corrupt and to do a factory reset to fix it.
Since I had deleted the system when in TWRP, I used the TWRP factory reset but the message came up again. I cycled through this several times and finally just entered a few random letters as the password and when it said that the password was correct I knew that I was in trouble.
When I got back to TWRP I wiped everything and still got the problem..
I then wiped everything and tried to restore a saved backup, the problem remained.
I then installed MIUI 9Pro and it installed OK but an error panel kept popping up covering the screen. Also the problem with MIUI was that the three software keys, home, back and ?? were missing and it appeared that it worked only with hardware keys which the Y5 does not have.
The error message kept popping up and it was difficult to use the phone and I managed finally to boot into recovery and after deleting the required partitions I restored it and it worked as before I loaded CRDroid.
BTW I have bricked it several times with the warning screen static and/or cycling between it and the Huawei boot flower and I managed to unbrick it.
To unbrick you need to get into TWRP or to get it to power off and then you can install a stock ROM or boot partition from TWRP or use fastboot to install stock boot, system and recovery partitions extracted from an update.app (used to automatically update a locked unrooted phone).
Huawei drivers and adb and fastboot need to be on your PC with the phone plugged into your PC.
enviro8
drdroid rom had problems on my y5 also . but in this 3 roms i think MIUI 9Pro is best yet ...
waiting for new , stable rom for this phone
Aleko91 said:
enviro8
drdroid rom had problems on my y5 also . but in this 3 roms i think MIUI 9Pro is best yet ...
waiting for new , stable rom for this phone
Click to expand...
Click to collapse
How did you get the three software icons back, home and the square to show up?
When I used MIUI they were hidden and I could not go any further. Also an error panel kept popping up and I couldn't get past it.
can you link me to an English forum about ROMs for Y5 (2017)? the translated russian is not easy to understand...
enviro8
y5 is my brother's phone , i have galaxy j320f ...
but i can surely (100%) say that u can show hidden 3 buttons in settings . by default yes , its hidden ... try to find in setting > Additional Settings > Key and Gesture shortcut , or button and gesture shortcuts ...
enviro8 said:
I installed CRDroid through TWRP and it bricked my Y5 several times.
This has been reported on several forums as happening by a number of users
On reboot it cycles between the unlocked warning and a screen stating that the storage is locked and to enter an unlock password.
When a password is entered that looks correct, it states that the password was correct but the action was corrupt and to do a factory reset to fix it.
Since I had deleted the system when in TWRP, I used the TWRP factory reset but the message came up again. I cycled through this several times and finally just entered a few random letters as the password and when it said that the password was correct I knew that I was in trouble.
When I got back to TWRP I wiped everything and still got the problem..
I then wiped everything and tried to restore a saved backup, the problem remained.
I then installed MIUI 9Pro and it installed OK but an error panel kept popping up covering the screen. Also the problem with MIUI was that the three software keys, home, back and ?? were missing and it appeared that it worked only with hardware keys which the Y5 does not have.
The error message kept popping up and it was difficult to use the phone and I managed finally to boot into recovery and after deleting the required partitions I restored it and it worked as before I loaded CRDroid.
BTW I have bricked it several times with the warning screen static and/or cycling between it and the Huawei boot flower and I managed to unbrick it.
To unbrick you need to get into TWRP or to get it to power off and then you can install a stock ROM or boot partition from TWRP or use fastboot to install stock boot, system and recovery partitions extracted from an update.app (used to automatically update a locked unrooted phone).
Huawei drivers and adb and fastboot need to be on your PC with the phone plugged into your PC.
Click to expand...
Click to collapse
Where are you getting the stock partitions from?
I just got one of these and am now stuck with a phone that boots straight to TWRP but I can also get to fastboot.
Hello everyone, just wanted to say a quick thanks, after successfully rooting and installing custom roms on two phones thanks to the information on these forums, third time turns out to be a charm and I managed to hard brick my new P10 lite.
The situation right now:
no charge light, no combination of buttons will do anything, phone is dead and will not boot or vibrate.
my computer will recognize that a phone is connected, for example Hisuite will pop up when i connect the phone, and in device manager, it shows Lemobile android device and the submenu says Android bootloader interface.
how i got here:
i was trying to install lineage 14.1 from this haky86
https://forum.xda-developers.com/p8...m-lineageos-14-1-huawei-p8-lite-2017-t3649292
but before i did that, i used this guide to install twrp and supersu:
https://forum.xda-developers.com/p10/how-to/twrp-how-to-root-p10-lite-t3617418
everything went fine, on the stock operating system i had root and system was running.
when i installed lineage, i lost root and couldnt figure out how to get it back. so i used this guide to restore the stock system and was going to try again from the beginning.
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
however, when i tried to reinstall lineage for the second, third and fourth time, i kept getting stuck in a bootloop with the lineage animation. it seemed to me that i needed to flash the vendor image, and i found a guide on xda how to do it, but it wouldnt let me flash to the vendor partition. (sorry, i dont recall the exact error and i cant get there anymore :/)
so in massive frustration and desperation, i tried to use this method:
https://forum.xda-developers.com/p8...uide-unbrick-huawei-p8-lite-2017-pra-t3713574
which i know is for a p8 and i never should have tried to install it, but it went through the whole download process and at about 50-60% on the recovery the phone went black and never turned on again.
i have read that perhaps disconnecting the battery for a few minutes might help? or is this something that dc unlocker can help with?
any advice would be greatly appreciated. if more information is needed, please let me know.
Hi,
Have you tried completely turning off your phone (pressing on/off button for roughly 20 seconds) and then booting into recovery (pressing Volume Up and Power key simultaneously for rouhgly 10 seconds)?
Best,
Kenny
Thanks for the reply, but as I said, no button combinations elicit any response. The only sign that the phone is not completely dead is that it will be recognized by my computer as an android phone, but adb (for example) says no device is connected.
lineage gives you bootloop due to wrong data partition format
bricked my p10 lite several times same ending
only way that always gets the phone back to life is flashing lineage, i took haazan's one
BUT BEFORE flashing the lineage 14.1 zip check partition format is ext4
when back on lineage and stock ROM is wanted boot into twrp and re change format to f2ts or how it is named and flash the stock zip
unbricked
edit:
saw your second post too late
if the phone does not response on any button(s) maybe adb sideload command for change partition format and then sideloading the lineage zip is a way?
I have a similar problem, I have a custom rom (Elemental) but I flash another custom rom, it was normal, in the reboot it not turn on, only is in fastboot mode, i flash original system, cust, boot, and another but it is the same, help me please
Hello everyone,
my Huawei Mate P10 Lite was delivered with a preinstalled TWRP,
so i was not able to install any OTA update at all.
WIth the last update i decided to reset the phone (or get atleast rid of the TWRP), so i can update to the new EMUI.
Hower i tried different things, the TWRP prevented all of them, so i wont mention them..
> What happend>
I tried to reset the phone via the huawei recovery mode/menu, after i read a tutorial..
the phone restared and was stuck in the huawei logo while booting.
so now my phone will start,
there comes the "your device has been unlocked and cant be trusted logo" screen and it will boot into
a blank screen with the three android buttons (however they have no function)
the vol +/- key work, and the power key will show the restart or shutdown menu, that's it.
how do you call it? softbricked?
i tried to download several ROMs, they all come with a CRC error while unpacking the update.app.
>My Questions>
what can i do to install a working OS?
i dont mind if its EMUI or some custom ROM.
what software do i need to flash the phone?
i think TWRP is gone
i couldnt get the huawei update extractor work, while the phone was still working.
where can i find an image for my phone?
i dont mind if its emui or something else
the phone is a RNE-L21
thanks in advance, and have a nice evening and weekend!
i forgot to mention:
the huawei eRecovery mode wont work,
i can log into WLAN, but i get the error: "getting package info failed"
so this is not an option.