What is MicroG ?
MicroG is a small pakage that emulates gapps on your phone. Its very small in weight. Its works same as google play service and allow apps to work on it. MicroG does not consume that much*battery, RAM and storage*(compared to gapps). And its doesn't harm you're device any way
In simple word its a smaller version of gapps(pico)
Requirement :-
1)Twrp installed
2)U need a custom rom which supports "android signature spoofing"
Where to find this option:-
normally u find this option in 1)developer option or
2)apps > permission or
3)in personalization/configuration.
If u didn't that means your rom probably not support signature spoofing
Roms that supports signature spoofing :-
1)halogen os or xos (tested)
2)Nitrogen os(tested)
3)Omni rom,cm12.1,resurrection remix ,lineage os 13
4)crdroid
And many more. Search yourself in xda
Installation :-
I made a twrp flasheble zip for install this easily
1) clean flash your current rom and then flash microG zip file (don't flash any type of gapps)
2) after boot completed go to phone setting and enable signature spoofing
3)after that check your app drawer u will find a new app called "microG setting"
5)open that app, tap on "self check" then enable first 3 options in "signature spoofing section" and then go down, in" system" section enable battery otimization
6) go back and enable "google device registration" , "google cloud massaging" , "google safetynet"
7) in "google safetynet" tap on three dot menu and tap on advanced select first option "use official server"
That's it u done that now enjoy gapps less system
Disclaimer :-
Micro-g is just a play service emulator so its may or may not work with all app some app might get crashed, but believe me its working just fine with our daily used apps
still use it at your own risk
Don't blame me if anything goes wrong
Credits:-
Thanks to microG devs
Note:
1)Google play store is included so don't worry about that
2)its not htc desire 816g specific it should work on other device too
Screenshots :-
I have installed Lineage 15.1 on my OnePlus 2 (20181016 nightly) and everything works apart from Android Auto. Every time I try to launch it I get the following error message.
"Something Went Wrong - Google Play Services doesn't seem to be working right now"
I installed Open Gapps (full) at the same time (no reboot between installs).
I have tried full wipes and resets.
Please can anyone suggest a solution? Can I try a more recent version of Google Play Services from APK mirror and if so do I need to uninstall the current version first?
I don't know if this is related, but my OPT with LineageOS 15.1/same nightly doesn't work with Android Auto unless I enable developer options and enable ADB debugging. Sometimes a nightly will reset that back to disabled, though usually it's sticky and doesn't change across nightlies. The last time it happened was about a month ago.
Thanks for the suggestion. I've tried that both in the car and just running the app from the phone and no joy.
When I first installed 15.1, I used MindTheGapps-8.1.0-arm64-20180320_011441. I had been having some camera issues with OpenGapps, and used MindTheGaps with some self installed camera software instead. Worth a shot perhaps. Also for reference my Android Auto (using autoupdate) is version 3.7.584044-release according to app info.
I have now resolved this issue by joining the Google Play services beta.
After the new version installed, I rebooted and Android Auto started working. Must be something about the version that came with the version of Lineage I installed.
Uncle_Bulgaria said:
I have now resolved this issue by joining the Google Play services beta.
After the new version installed, I rebooted and Android Auto started working. Must be something about the version that came with the version of Lineage I installed.
Click to expand...
Click to collapse
Unbelievable! After searching the entire internet for a solution, this is the only thing that worked . Thanks!
Another Solution worked for me:
I had the same prolem on my Costum OS Lineage.
Then i uninstalled the GAPPS and installed the first GAPPS Version for my Android Version 8.1: (Release: 01 March 2018)
When I opened the app after that, i geted the message that the google play services is not up-to-date and i updated it through the play store.
I dont know why, but it is working now. for me.
blazingUnknown said:
Another Solution worked for me:
I had the same prolem on my Costum OS Lineage.
Then i uninstalled the GAPPS and installed the first GAPPS Version for my Android Version 8.1: (Release: 01 March 2018)
When I opened the app after that, i geted the message that the google play services is not up-to-date and i updated it through the play store.
I dont know why, but it is working now. for me.
Click to expand...
Click to collapse
How did you uninstall GAPPS and installed 'first' version ?
I've oneplus2 with latest LOS 15 (8.1) and GAPPS from https://opengapps.org/# (ARM64/8.1/mini).
My android auto has same issue as OP.
John00000 said:
How did you uninstall GAPPS and installed 'first' version ?
I've oneplus2 with latest LOS 15 (8.1) and GAPPS from ... (ARM64/8.1/mini).
My android auto has same issue as OP.
Click to expand...
Click to collapse
Download your 8.1 package from 01 March 2018 and copy it on your phone..
(Go to the page where you can download it, scroll down, click on "OLDER RELEASES" and replace from the url "releases/" with "releases/tag/20180301")
I am not able to post outside links, because i registered especially for posting this solution...
Reboot your Phone into the Recovery mode.
Then "Wipe > Advanced Wipe > System"
After this go to "Advanced > File Manager" and delete all files that starts with "/data/app/com.google..."
Now you must install your Costum ROM again and install GAPPS which you copied on your phone. (User apps and data are retained)
:good:
blazingUnknown said:
Download your 8.1 package from 01 March 2018 and copy it on your phone..
(Go to the page where you can download it, scroll down, click on "OLDER RELEASES" and replace from the url "releases/" with "releases/tag/20180301")
I am not able to post outside links, because i registered especially for posting this solution...
Reboot your Phone into the Recovery mode.
Then "Wipe > Advanced Wipe > System"
After this go to "Advanced > File Manager" and delete all files that starts with "/data/app/com.google..."
Now you must install your Costum ROM again and install GAPPS which you copied on your phone. (User apps and data are retained)
:good:
Click to expand...
Click to collapse
Thank you for guidance.
I've tried to avoid system re-install and only deal with google apps.
Version of google play installed by 12/7 opengapps was 14.7.99 110400
First attempt: removed /data/app/com.google* via "adb shell" and flashed "pico" opengapps from 3/1/2018. (original gapps were mini)
After launching "auto" it requested "google play" update but app still failed with same error (after update).
After update I got google play version 14.7.99 090408 which looks lower than installed by 12/7 gapps.
2nd attempt: downloaded "stock" opengapps from 11/28 and create gapps-config.txt to exclude unwanted google application from "stock" but kept android auto from gapps package.
Again removed "/data/app/com.google..." and flashed gapps.
It asked to upgrade "google play" (because of gmail) and after upgrade Android auto worked !
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab S2 stock to Android 10
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab S2 (models SM-T713, T719, T813, T819) stock to Android 10 Q / LineageOS 17.1
Supported models:
- SM-T713 (gts28vewifi)
- SM-T719 (gts28velte)
- SM-T813 (gts210vewifi)
- SM-T819 (gts210velte)
This detailed step-by-step guide helps you transform your Samsung Galaxy Tab S2 to a powerful one with Android 10.
Make sure your tablet is compatible: in Android, go to Settings > About tablet. Check Model number is listed above.
If not, quit this tutorial.
### READ THOSE WARNING COMMENTS
### See all my tutorials at https://github.com/djibe/Android-tutorials
### Buy me a coffee: https://ko-fi.com/djibe
CHANGELOG
v3. TWRP 3.6, update pack, add download links
v2. Add support for Netflix and Disney+, Magisk updated
v1. Initial release for Android 10
1) DOWNLOAD
- djibe Galaxy Tab S2 pack: https://drive.google.com/file/d/1PcnZaQieCz3N0MJhOp6eC3MjAYYvx0wH/view?usp=sharing
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.6 recovery for 4 models + Magisk Root). Unzip files.
+ ROM LineageOS 17.1 Unofficial: https://forum.xda-developers.com/t/rom-unofficial-10-lineageos-17-1-t713-t719-t813-t819.4070161/
SM-T713 (gts28vewifi): https://lineageos.wickenberg.nu/gts28vewifi
SM-T719 (gts28velte): https://lineageos.wickenberg.nu/gts28velte
SM-T813 (gts210vewifi): https://lineageos.wickenberg.nu/gts210vewifi
SM-T819 (gts210velte): https://lineageos.wickenberg.nu/gts210velte
Alternatives: https://los.rockhost.se/
### Camera doesn't work, 3G/Data network doesn't work
+ BiTGApps Package ARM64 10: https://github.com/BiTGApps/BiTGApps-Release/releases
+ Charge tablet to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug tablet to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > About device > Software update > Update now
### BACKUP NOW, you will lose everything later.
3) FLASH TWRP 3.6 RECOVERY
Go to Settings > About tablet.
Tap 7 times on Build number to unlock Developer Options.
Go to Settings > Developer options and switch OEM unlock ON.
Shut down tablet.
Boot in Download Mode: hold Home + Power + Volume- until you see Warning screen.
Confirm access to Download mode by pressing Volume+.
Tab now displays "Downloading... / Do not turn off target".
Connect tab in USB, wait for drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select corresponding twrp file for your model (ie: twrp-3.6.0_9-0-gts28vewifi.tar for SM-T713)
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug tablet.
Restart tablet to recovery:
- hold Power + Home + Volume- until tablet screen becomes black.
- and immediatly switch from Volume- to Volume+ (still holding Power + Home) to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP PARTITIONS AND SYSTEM (Nandroid backup)
Boot in Recovery Mode : Hold Home + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot.
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
I prefer to backup System, Data and Boot partitions. In case of problem, you will have your tablet in its original state.
Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
Save backup: still under TWRP recovery, connect tablet to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access tablet's memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik / ART Cache, System, Data, Internal Storage, Cache then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
5) FLASH ROM, GAPPS +/- MAGISK ROOT
Back to TWRP main menu, go to Mount menu again to connect tablet to PC again.
Connect tablet to PC and use Windows explorer to copy files on tablet's internal memory.
Copy TWRP folder from your tablet to somewhere safe on PC.
This backup can restore your tablet to its original Samsung state.
Copy files of ROM + Bitgapps + Magisk on tablet.
Go back to TWRP Home menu. Then tap on Install > choose los*.zip,
then Add more zips and select bitgapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end.
Again, go to Reboot > Recovery and swipe to reboot.
Optional: After restart, go to Install, select Magisk and swipe to flash.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System and on Install TWRP App? menu, tap on button Do Not Install
Wait for the tablet to boot.
It will be stuck with LineageOS animation on it's first launch. It is normal.
Force reboot using the Power and Volume Down buttons.
Now let LineageOS finish to start.
6) OPTIONAL: ROOT ACCESS
Configure Android as you like.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
Open Magisk app (v23+).
Go to Settings > go to App Rename app to Godmode to hide hide.
Below, switch MagiskHide ON.
Now go to Magisk Modules tab > install liboemcrypto disabler and MagiskHide Props Config.
Connect to your Google account, download from Play Store Netflix and Disney+.
### If you are already connected to Google account.
Clear cache (Settings > Apps > All apps > Google Play Store > Storage > Clear storage) and restart tab.
Relaunch Play Store, Netflix and Disney+ will be available in SD.
7) TWEAKS
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%: Settings > Display > Dark theme
- For better battery, remove Always on display
Settings > Display > Screen saver > Desactivated
- Activate Developer options
Go to Settings > About.
At bottom, tap 7 times on Build number. You activated Developer options.
Go to Settings > System > Advanced > Developer options.
- To tweak overclocking and more, use SmartPack-Kernel Manager
SmartPack-Kernel Manager - Apps on Google Play
The ultimate tool to manage your kernel
play.google.com
### If you experience battery drain, stick to 20220312 build (thx to @yoblo)
8) OBTAIN GOOGLE MOBILE SERVICES (GMS) CERTIFICATION
Google now restricts Google Play and Google apps access to certificated devices. Since you have a custom ROM, you are banned.
We now need to subscribe for the Google Play Certification.
Download Device ID (by Evozi) app from Play Store.
Launch app.
Tap on the Google Service Framework (GSF) line, then tap on the COPY button.
In your Android webbrowser, go to: https://www.google.com/android/uncertified/
Connect to Google using your Google/Android account.
In the input field of the page, paste the 16 digits code.
Click on the Save button, a success message confirms your device is Certified.
Then go to Settings > Apps > Google Play Store > Storage > Clear storage
Do I need to re-certify it ?
"Your device’s GSF ID is reset every time your device is factory reset (or when you wipe the GSF app itself) since it is stored in your data partition, so you must re-register your GSF ID every time you perform either of these actions."
More info here : https://lineageos.org/Google-Play-Certification/
Enjoy,
djibe
Thanks: ripee, Luk1337, LineageOS team, TWRP team
---------------------------------------
Force Samsung Galaxy Tab S2 to restart
Hold Power + Volume down for 10-20 seconds
I have just followed this to update my T719 tablet. All seems to work other than the camera, when you try to open the camera app it freezes before eventually saying 'unable to connect to camera', then closes. Have tried another camera app but still get the same issue. Is this a known error?
Thanks
.
Hi @smarty79 , yes camera doesn't work.
I will be more precise about it.
Thx for reporting
Hi,
3G network doesn't work
Click to expand...
Click to collapse
Do you mean that RIL does not work either (no 4G)?
Are you working on a fix for the camera and mobile network?
bulldozerecske said:
Hi,
Do you mean that RIL does not work either (no 4G)?
Are you working on a fix for the camera and mobile network?
Click to expand...
Click to collapse
Hi, you have to be careful and download ROM according to your model.
EDIT: yes Data and camera are not working.
Sadly you won't find a ROM with these. Or tell me which one.
You may try this Oreo for camera: https://forum.xda-developers.com/t/...-resurrection-remix-os-6-2-x-discont.3865882/
djibe89 said:
Hi, you have to be careful and download ROM according to your model.
Only camera is working.
If netowrk is not, you probably have chosen the wrong ROM.
Click to expand...
Click to collapse
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
bulldozerecske said:
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
Click to expand...
Click to collapse
Hi, you won't find better ROM except that Data and camera don't work.
For camera you may try this Oreo ROM: https://forum.xda-developers.com/t/...-resurrection-remix-os-6-2-x-discont.3865882/
bulldozerecske said:
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
Click to expand...
Click to collapse
LineageOS 16 has RIL working, at least on the T719.
succefully installed. Thnak you !
Tutorial updated for Netflix and Disney+
sorry for this but i failed and i need help
i did every thing until wipe but afterwards my PC unable to see device folders so i can load the files
side note: didn't backup also so stuck on recovery screen
help please!!!
Thanks for this, works exactly as stated...
However I misread it, "### Camera doesn't work, 3G/Data network doesn't work" - I thought oh I don't care about 3G, I'm always connected to LTE without my brain acknowledging that it's all cellular connectivity not just 3G. DOH.
Is there anything available for SM-T817V? Looking desperate help to update Android 10.
Thanks
fmc000 said:
LineageOS 16 has RIL working, at least on the T719.
Click to expand...
Click to collapse
any particular build? there are multiple versions Thanks
When I boot, I end up back in the TWRP main menu. I've tried:
"Reboot System and on Install TWRP App? menu, tap on button Do Not Install" after:
"Then tap on Install > choose los*.zip,
then Add more zips and select opengapps*.zip,"
(advice given in another forum) but it makes no difference: LineageOS animation continued for several minutes, then I get into RECOVERY REBOOT and back to TWRP menu.
Samsung SM-T813
lineage-17.1-20210918-UNOFFICIAL-gts210vewifi
open_gapps-arm64-10.0-nano-20210929
Magisk-v23.0
Hi @Tetenterre,
first boot leads to bootloop.
Flash > boot > force reboot and wait
Thanks for your reply, djibe89 - when I do that (ie Power & Volume down), I end up back in TWRP.
Installed successfully by following your guide to a T (although I used the latest TWRP). I know support for this old girl has probably reached it's limit, but it was tough to find the ROM file (most links in the thread are dead - had to use one from archive.org)
Thanks a lot for putting this together!
MouldeyWan_Kenobi said:
Installed successfully by following your guide to a T (although I used the latest TWRP). I know support for this old girl has probably reached it's limit, but it was tough to find the ROM file (most links in the thread are dead - had to use one from archive.org)
Thanks a lot for putting this together!
Click to expand...
Click to collapse
Hi, sorry for that.
Thanks for telling me. It's hard to keep up with all the models I support.
I'll try to fetch all files and backup these on Androidfilehost.
Thx for archive.org, didn't know it.
Enjoy
Hi there everyone! Today I will show you how to install the "secret" One UI version of Google Messages!
The best things about this "special" version are that:
it has RCS enabled by default,
it will get the features from Samsung Messages. And the best? It will be
it is already native in Galaxy S22, Galaxy Z Fold3/Flip, etc.
NOTE: There is no ARM .apk available yet. This method will only work for ARM64 devices (for now).
Video guide:
Too long; didn't watch steps:
If you already have it installed, uninstall Google Messages.
Go to APKMirror and search for Google Messages.
Tap on the most recent version of the app. It's usually the one on the top (for example, 9.3.002 is newer than 9.2.030).
Scroll down to see all the available downloads.
Tap on the "(...phone_samsung_dynamic)" variant. If there is no such variant, you may try installing an older version or wait until it'll be uploaded.
Tap on "DOWNLOAD APK BUNDLE".
Launch the Google Play Store and search for "APKMirror".
Install APKMirror Installer (Offical).
Launch APKMirror Installer.
Tap on Browse files.
Allow all the permissions it asks.
Go to the directory where the .apkm file is and tap on it.
Tap on Install package.
Tap on Install app.
Turn on "Allow from this source" and go back.
Tap on Install app again.
When a pop-up appears, tap on Install.
Launch Google Messages.
Allow all permissions and set it as your default SMS app.
Close the app from the Recents menu and launch it again.
─── Enabling RCS and features from Samsung Messages ───
Tap on the triple dots on the top right and go to Settings.
Tap on Chat features.
Turn on "Enable chat features".
When the pop-up appears, tap on Allow.
Tap on "Verify your number" and insert your number.
Wait until the Status changes to "Connected". If it doesn't, restart your device and try again.
Go back to Settings and then go to Advanced.
Tap on Text on Galaxy devices.
Turn on "Allow Bixby and text on Galaxy devices".
Close the app from the Recents menu and launch it again.
Enjoy the new Messages app!
Links:
Google Messages in APKMirror ➜ https://www.apkmirror.com/apk/google-inc/messenger-google-inc/
APKMirror Installer ➜ https://play.google.com/store/apps/details?id=com.apkmirror.helper.prod
Hi everyone !!
I recently made a video tutorial on how to pass safetynet and be play protect certified on any custom ROM. For the video, I used my Samsung Galaxy S20 (SM-G980F) as an example. It is currently running the Pixel Experience Plus GSI ROM. If you have any questions or need help with the process please let me know and I'll be happy to guide you !! Also, let me know what other guides you want me to post and I'll make the videos for you !!
YouTube Step by Step Tutorial
Pre-Requisites
Have root access on your custom ROM
Steps to Pass SafetyNet and be Play Protect Certified on any Custom ROM
1. Open your browser and search for "Magisk Hide Props Config Download"
2. Look for the XDA post and scroll down until you see the zip module attachment
3. Download the attachment to your phone's internal storage
3. Go back to google and search for "Universal SafetyNet Fix"
4. Look for the GitHub page (the first link) and scroll down to the "Download" section
5. Click on the download link and scroll down until you find the zip module attachment
6. Download the attachment to your phone's internal storage
7. Open Magisk and click on the gear icon (settings)
8. Scroll down and enable "Zygisk" and "Enforce Deny List"
9. Click on the "Configure Deny List Options"
10. Click on the three dots at the top and select "Show system apps"
11. Search and select all the apps that are giving you trouble with SafetyNet (Netflix, Banking Apps, Play Store, GooglePlay Services etc.)
12. Go back to the Magisk homepage and go to the "Modules" tab
13. Click on the "Install From Storage" button
14. Select the file you downloaded from the XDA forum
15. Wait for the module to install
16. Go back and click on the "Install From Storage" button again
17. Select the file you downloaded from GitHub
18. Wait for the module to install
19. Click on the blue "Reboot" button at the bottom to restart your phone
20. After your phone restarts, run a SafetyNet test. Your status should now be PASSED.
21. Open Magisk again and click on the gear icon at the top (settings)
22. Scroll down and click on "Configure Deny List"
23. Click on the three dots at the top and select "Show system apps"
24. Search and select the "Google Play Services" app
25. Go to your phone's settings and look for the "Apps" section
26. Click on "See all apps"
27. Click on the search icon and look for "Google Play Store"
28. Select "Storage & Cache"
29. Tap on "Clear storage"
30. Go back to "All apps"
31. Click on the search icon and look for "Google Play Services"
32. Select "Storage & Cache"
33. Click on "Manage Space"
34. Tap on "Clear all data"
35. Open the Google Play Store
36. Click on your profile picture in the upper right hand corner
37. Tap on "Settings"
38. Click on "About"
39. Look for "Play Protect Certification"
40. Under that you should see a message saying "Device is certified"
ENJOY !!!
I havent managed to install a GSI on the same device. Maybe you can help me?
got that working on my raspberry pi 4, thanks
Not working anymore on S20 Ultra.
See here: linky
I wanted to use Disney+, Netflix and Amazon Prime on my Redmi Note 8T with Magisk 25.2.
Your guide made all Apps except Netflix appear on the Playstore and work.
Thank you for that!
Does anyone know why Netflix won't be shown in Appstore on the phone? On my PC i see "you do not have a compatible device", whereas the others can be remote installed without problems.
I see "Playstore certified", i tried some Safetynet checkers and all say "Basic integrity pass, CTS pass", and i even tried some DRM Info apps to check my Widevine level, which is marked as L1 (the best).
And yeah, i deleted playstore data (repeatedly), rebooted the device (repeatedly) and blocked the app(s) directly after installation in Zygisk.
I follow all the instructions without seeing this post, and I was not able to make it work.
But your video also covers the fix for my problem...
CLEARING THE CACHE AND STORAGE DATA made it work!!!
you rock!!!
Tried these instructions on the LineageOS 20.0 build for Samsung Galaxy Tab S3 (rom is here: https://forum.xda-developers.com/t/...1-2-lineageos-20-0-for-galaxy-tab-s3.4510785/).
After following all the instructions, the play store is still coming up as "Device is not certified".
Thinking this might be because the ROM is an Android 13 ROM and I notice that some of the Magisk modules referenced are only certified up to Android 12.
Hi all,
I checked on the Play Store it says "device certified" also several Safetynet checkers say the same ("passed").
The only thing that I can not use is my banking app.
My phone Sagit using lineage-20.0-20230119-nightly-sagit-signed.zip and twrp-3.7.0_9-0-sagit.img
twrp-3.7.0_9-0-sagit.img
lineage-20.0-20230119-nightly-sagit-signed.zip
Why is saying ("passed") that I can't use my banking app?
P.S.: I don't install any Magisk or SafetyFix.
Thank you
Maybe your Banking app detects your open Bootloader or the ROM misses some keys or something.
I have Magisk installed on my debloated stock ROM and use the provided feature to hide it from those apps, works like a charm.
Banking app worked fine, got an update and suddenly "This device is unsafe, contact support". Deleted App data, hid Magisk, rebooted, worked again (and does still).
Thanks, it works on my samsung s4
It worked for me on S20 ultra.
Thanks a lot!