Hi,
I have Oneplus 5 with TWRP 3.1.1 running 4.5.13. I want update it.
Should I first update TWRP to latest version?
Can I wipe everything and straightly flash to latest OxygenOS and then to LineageOS?
When should I flash/instal Gapps and Magisk? Right after flashing LineageOS or I need to first need to restart it?
Thanks for help.
vito45 said:
Hi,
I have Oneplus 5 with TWRP 3.1.1 running 4.5.13. I want update it.
Should I first update TWRP to latest version?
Can I wipe everything and straightly flash to latest OxygenOS and then to LineageOS?
When should I flash/instal Gapps and Magisk? Right after flashing LineageOS or I need to first need to restart it?
Thanks for help.
Click to expand...
Click to collapse
At first it's necessary to update to 5.1.4 oxygenOS and then 5.1.5. Directly to 5.1.5, isn't working for most people. You can install latest blu spark twrp recovery before or after the os update.
After this you're ready to to install lineageos, gapps, magisk in this order.
It may be useful to format internal storage, since it can be blocking the boot.
Good luck :good:
Thanks very much
Related
Hello All,
Can anyone provide the steps for updating my OP2, currently running OxygenOS 2.1. (Android V. 5.1.1) to the latest version.
My device is rooted with TWRP V2.87.0. The device also had Xposed Framework installed.
I need step-by-step process as I do not want to loose any of my DATA.
Thanks in advance.
__
Regards,
Nilesh E. Lokhande
neelz369 said:
Hello All,
Can anyone provide the steps for updating my OP2, currently running OxygenOS 2.1. (Android V. 5.1.1) to the latest version.
My device is rooted with TWRP V2.87.0. The device also had Xposed Framework installed.
I need step-by-step process as I do not want to loose any of my DATA.
Thanks in advance.
__
Regards,
Nilesh E. Lokhande
Click to expand...
Click to collapse
Flash the Oxygen OS 3.1.0 signed flashable zip
Wipe data & caches via TWRP
Flash the TWRP 3.0.2-2 img via TWRP
Reboot recovery via TWRP
Flash the Oxygen OS 3.1.0 signed flashable zip again
Flash one of the modified SuperSU zips
All the files you need are in post #1 of the Oxygen OS mirrors thread.
You can try updating without wiping data but you may well have issues afterwards.
Spannaa said:
Flash the Oxygen OS 3.1.0 signed flashable zip
Wipe data & caches via TWRP
Flash the TWRP 3.0.2-2 img via TWRP
Reboot recovery via TWRP
Flash the Oxygen OS 3.1.0 signed flashable zip again
Flash one of the modified SuperSU zips
All the files you need are in post #1 of the Oxygen OS mirrors thread.
You can try updating without wiping data but you may well have issues afterwards.
Click to expand...
Click to collapse
Hi Spanna,
Thanks for your reply. Can you tell me what kind of issues can be faced?
Is this process which you mentioned, Safe?
neelz369 said:
Hi Spanna,
Thanks for your reply. Can you tell me what kind of issues can be faced?
Is this process which you mentioned, Safe?
Click to expand...
Click to collapse
No issues if you wipe data.
It's safe if you follow the instructions.
So I have a problem with the Oneplus 5. I got the xXx Nolimits ROM that's based on OxygenOS 5.1.3 and installed the Magisk xXx Nolimits 4.3 aswell.
I want to upgrade it to 9.0.4, but it won't do it with TWRP 3.2.3-0. Haven't tried it with TWRP 3.3.0.
Could it possibly work, if I go back to full stock and upgrade it via OTA and then flashing it again via TWRP 3.3.0?
The vendor partition is the problem here, I think.
Thanks for any help!
lenci98 said:
So I have a problem with the Oneplus 5. I got the xXx Nolimits ROM that's based on OxygenOS 5.1.3 and installed the Magisk xXx Nolimits 4.3 aswell.
I want to upgrade it to 9.0.4, but it won't do it with TWRP 3.2.3-0. Haven't tried it with TWRP 3.3.0.
Could it possibly work, if I go back to full stock and upgrade it via OTA and then flashing it again via TWRP 3.3.0?
The vendor partition is the problem here, I think.
Thanks for any help!
Click to expand...
Click to collapse
You guessed right. You need to flash stock 5.1.4 OxygenOS (which will create the vendor partition).
Then you can update to 9.0.4/9.0.5(remove the compatibility.zip from the rom files) either with OTA or manually flashing(see official oxygenOS rom threads for 9.0.5)then you can update the twrp to 3.3.x.
After this you can flash XXX magisk mod 4.3 onwards as it's a magisk module.
lenci98 said:
So I have a problem with the Oneplus 5. I got the xXx Nolimits ROM that's based on OxygenOS 5.1.3 and installed the Magisk xXx Nolimits 4.3 aswell.
I want to upgrade it to 9.0.4, but it won't do it with TWRP 3.2.3-0. Haven't tried it with TWRP 3.3.0.
Could it possibly work, if I go back to full stock and upgrade it via OTA and then flashing it again via TWRP 3.3.0?
The vendor partition is the problem here, I think.
Thanks for any help!
Click to expand...
Click to collapse
That's exactly how to do it. Use an Oreo era Codeworkx TWRP to flash a full OOS ROM. You have to have used 5.1.4 to create the Vendor partition so flash that. Let it overwrite TWRP with the stock recovery, and then OTA up to latest OOS. Fastboot flash latest Codeworkx TWRP and you're done.
Uninstall Magisk before you begin.
strongst said:
You guessed right. You need to flash stock 5.1.4 OxygenOS (which will create the vendor partition).
Then you can update to 9.0.4/9.0.5(remove the compatibility.zip from the rom files) either with OTA or manually flashing(see official oxygenOS rom threads for 9.0.5)then you can update the twrp to 3.3.x.
After this you can flash XXX magisk mod 4.3 onwards as it's a magisk module.
Click to expand...
Click to collapse
Exactly this was my plan. Thanks for the help. I struggled with this for literally months!
Hi all,
I once tried to update my rooted onePlus 5 (Magisk) to the latest oxygen os version, and lost everything. (with a corrupted Nandroid backup haha)
Since then, I've been pretty careful not to update anything, OTA isn't working anyway.
But now is about time to update it all.
I have flashfire, and Oxygen Updater (currently downloading OOS 5.1.4)
My question, before I go any further is:
If I download ALL the updates on Oxygen Updater and then flash them with flashfire (flash ZIP & OTA --> Select downloaded firmware --> proceed), I should be able to gradually flash all the new update until OOS 9.0.2, Keep root, and more importantly, Keep ALL my data, apps and all.
Is that correct? Does anyone have a proper flashfire walkthrough?
I'm a bit hesitant as someone seems to have had issues with Magisk as per below source's comment
source: https://forums.oneplus.com/threads/...with-flashfire-bonus-tip-oneplus-3-3t.621501/
Thanks!
To upgrade from Oreo non-treble to latest
- From TWRP, flash OxygenOS 5.1.4, Magisk and all the other mods and boot up once (to create vendor partition)
- From TWRP, flash OxygenOS 9.0.8, Magisk, all the other mods and a Pie-capable TWRP
PierreVicquery02 said:
To upgrade from Oreo non-treble to latest
- From TWRP, flash OxygenOS 5.1.4, Magisk and all the other mods and boot up once (to create vendor partition)
- From TWRP, flash OxygenOS 9.0.8, Magisk, all the other mods and a Pie-capable TWRP
Click to expand...
Click to collapse
And that will NOT erase any of my data?
Is it not possible to do it with flashfire? I don't have TWRP anymore I think..
Thanks!
mattou78400 said:
And that will NOT erase any of my data?
Is it not possible to do it with flashfire? I don't have TWRP anymore I think..
Thanks!
Click to expand...
Click to collapse
I actually don't know what flashfire is.
You will not lose data in theory, but it's a good thing to make a backup
Hi, I'm on LineageOS 14.1 Optimized by JDCTeam.
However I'm not able to install the latest Magisk.
Is it just not possible anymore because you need fastboot to install a patched boot.img?
I tried flashing through the regular way as a .zip file (just renaming the magisk apk into .zip) in TWRP 3.2.x.x. Also tried flashing the patched boot.img file from the rom through TWRP.
But whenever I flash it and reboot, everything force closes.
Any help on that?
Latest TWRP, latest LineageOS version (18.1), latest Magisk here. I have no issues with flashing Magisk in TWRP. In fact, I have lately had to dirty flash LineageOS then Magisk in TWRP, as a standard update in LineageOS via its updater causes a bootloop.
Fortunately this isn't my main device so....
In your case, I would update to the latest LineageOS as the version you have is really old. Updating may help.
Strephon Alkhalikoi said:
Latest TWRP, latest LineageOS version (18.1), latest Magisk here. I have no issues with flashing Magisk in TWRP. In fact, I have lately had to dirty flash LineageOS then Magisk in TWRP, as a standard update in LineageOS via its updater causes a bootloop.
Fortunately this isn't my main device so....
In your case, I would update to the latest LineageOS as the version you have is really old. Updating may help.
Click to expand...
Click to collapse
Thanks for the reply, but I want to stay on Android 7 Nougat, so maybe it's in fact not possible anymore. But maybe somebody else has an idea.
crysen said:
Thanks for the reply, but I want to stay on Android 7 Nougat, so maybe it's in fact not possible anymore. But maybe somebody else has an idea.
Click to expand...
Click to collapse
Check my S4 Unified Collection & Guides. You will find everything you need.
Hi, my device is currently without an OS after a full wipe. I have fastboot access and latest 3.6 TWRP recovery.
Can someone please share the link to last updated Android 10 OxygenOS stock ROM and how to flash it?
Also, how can I root via Magisk after installing OOS?
myblessayu said:
Hi, my device is currently without an OS after a full wipe. I have fastboot access and latest 3.6 TWRP recovery.
Can someone please share the link to last updated Android 10 OxygenOS stock ROM and how to flash it?
Also, how can I root via Magisk after installing OOS?
Click to expand...
Click to collapse
Curious why you want a10? The latest oos is a11. You just flash the zip for oos in twrp. It will replace your recovery so always reflash twrp after if you want it. Magisk can also be installed from twrp.
Brettroth said:
Curious why you want a10? The latest oos is a11. You just flash the zip for oos in twrp. It will replace your recovery so always reflash twrp after if you want it. Magisk can also be installed from twrp.
Click to expand...
Click to collapse
Wasn't my device so had to go with A10. Was able to install OS, recovery and root using THIS thread.
Thanks for the response anyway!