Help with unbricking? - ZTE Axon 7 Questions & Answers

Flashed A2017G_B10_NOUGAT_FULL_EDL, after that the phone boots up, zte logo, then for a second or less I see a android laying on its back like diagnostic or something, and after that the phone just shuts off. I can boot in EDL as COM20, idk if that is normal. Recovery doesn't boot.

I flashed it with MiFlash

So I recorded the phone in slowmotion, and there is a android with error sign and No Command error

Related

No reocvery, no boot image , HELP

Hi all
Don't know what went wrong but my phone has no recovery and no boot
I can get into firmware upgrade and fastboot.
if I turn on my phone it goes to black screen with fastboot txt.
I hold power and volume down to get into recovery and it trys but then goes back to fastboot txt screen.
also tried firmware update and updated this but gets stuck on 49% , and states try again. even with correct firmware
I am using windows 8 .
Any help would be great or is this a £450 paper weight now, only had it about 2 months from new.

Oneplus 2 boot looping

problem that came with it is the bootloop when i try to (re)start the device. The phone flashes the OnePlus-logo for half a second, vibrates, and starts again, over and over. The only way to get the phone out of the loop is by pressing POWER + VOLUME UP and booting into fastboot. Then i can do all the fastboot-commands on my PC, but i can't get into the recovery or flash anything because the bootloader is locked. Trying to 'fastboot oem unlock' only results in the device restarting and getting stuck in the bootloop i mentioned before again.
I managed to get the phone to work a few times by executing 'fastboot continue', which either starts to show the charging battery symbol or booting up like normal (about a 50% chance I'd say).
ADB commands can then be executed, but I'd need a way to flash a ROM without going into the bootloader or recovery, which seems to be impossible.
Update problem solves if anyone gets this follow the guide below.
The solution was simple i followed the guide below and it bought my phone back from the dead.
https://www.youtube.com/watch?v=R4SVSovw4Jo

Semi brick, firehose loop

Today I tried installing the new Paranoid Android but something went wrong during first boot and I am now the proud owner of a oneplus semi-brick. It seems to start and briefly shows the oneplus logo, then goes black, however, when plugged into my pc I can see it in the device manager.
I tried the Qualcomm unbrick guide but the downloadtool just puts the phone into a boot loop, briefly showing the logo before it reboots, again and again.
What else can I do?
Can you boot into fastboot?
evertking said:
Can you boot into fastboot?
Click to expand...
Click to collapse
No. When I try it just freezes when the fastboot text appears.
No access to recovery neither.

Bootlooping when not in charge..

Started Suddenly my a6000 plus went off and was not starting at all. I was running RR rom. I didn't install or modified anything prior to the problem. The interesting part is when I put it on charge and try to start, it starts with bootlooping but after sometime boots in system. But can't get into recovery. Now after starting if I plug out the charger it immediately shuts down and goes into bootloop. Now without putting it on charge it never goes into system. I can't get into recovery, only bootloader is showing up and fastboot commands are working but not adb. I tried Qdownloader but pc isn't recognizing phone as driver is not getting installed. What should I do?
Have you found a solution? I am facing a similar issue on stock, non-rooted. It keeps flashing the boot logo but when connected to power it boots in system. As soon as power is removed it keeps blinking the bootlogo aka bootloop.

can't recovery mode

Help
Initially I replaced the LCD. After being replaced with a new LCD, the first use is still normal. But after a while, my device turns off. But after being turned on again, just stuck on the mi logo. Then I tried it repeatedly but still stuck on the mi logo. Then I delete all data and do wipe partitions. But always experience unusual things. Loading cleans the data running, but when it's 5% it arrives directly to 99% and my device turns off again. I have tried many times, but always with the same results. And finally I tried to flash with recovery mode. The process went smoothly and looks fine, after the flash finishes, the device is restarted. But after being restart, after all this time, it just stuck on the mi logo. Then finally I removed the battery and I put it back on. But after I turn it back on, it just stuck on the mi logo again. Finally I tried to enter recovery mode, but apparently what appeared was the inscription 'the system has been destroyed'. And finally I flash using fastboot mode, but the device is still locked. And I have used edl mode too, but always asked for an account that has been authorized. Is there any other way? Please help, because I really need to use this device.
Thank you for those who helped

Categories

Resources