Greeting i have a G950W phone thats i have bought directly to rogers 1 years ago.
I am currently with BRI6 firmware revision.
I have also tryed few custom firmware in the past but reverted to official samsung few month ago.
I have downloaded latest G950W rogers firmware from sammobile and flashed it like it was told everywhere.
When i am on download mode i see samsun official and official
So here is my question, i have seem to have lost wifi-calling few month ago and i dont know why.
I did few official rogers s8 firmware restore since, and full factory reset also since.
But i dont see anymore the wifi calling in the phone app under setting.
ma i need to reflash something else ?
Related
Hi guys/girls
I joined the beta programming while it was still a thing, and since then I've been stuck on the last beta version released for this model.
When I try to do a software update, it says I am on the latest version, however I have checked and as far as I can tell I am still on a beta version (complete with the beta popup on boot).
I have checked the CSC version and as far as I can tell it is OXA.
One of my friends has an unlocked varient as well (EDIT: it has an ITV CSC code) and he managed to get the official release firmware about a month ago.
Any help would be greatly appreciated.
I got mine by flashing the stock btu mm complete with a data format per the instructions on sammobile using odin and my pc. As soon as i had the mm software installed and running i got the ota to 7.0. I think it was the btu csc and the format data that made it work. Yesterday i got an ota update to n.
Hey all. I am in the US but bought international S7Edge when it came out. I dont know what firmware it had I think it was some italian one maybe. Then i rooted and started using custom roms. Then when nougat officially came out for S7Edge i un-rooted and went back to 100% stock using i think Vodafone 7.0 firmware. I think because i rooted i have a negative test response from Knox which i think stops me from getting OTA updates. It shows in software info that my OS version has security patch only from January 2017 so I am clearly not on latest firmware even though OTA says I am on latest.
Is there a site with a database of all firmwares out for the S7Edge international variant So i can find the latest and flash it to my phone since OTA wont get the latest.
samsmobile has the latest.
Yoiu still have an issue with your kernal as phone still thinks you have custom rom. Tripped knox on stock firmware will not stop OTA from downloading.
Hello, I think I'm in trouble. What happened is that I got this phone just a few days ago. It seemed legit and the price was reasonable. So, I bought it. When I bought it, I checked everything, and it was all good. But unfortunately I didn't checked it by going to the download mode. Now this device says g928f which is the international version, but in download mode it says product : g928p. I didn't notice it earlier and when I thought...hey let me update it to 7.0(it was in 6.0 btw)...I tried to flash the latest g928 upadte(the April one)...and it didn't work. I tried to find workarounds, but nothing worked. Then, I noticed that it was saying g928p in download mode, I thought let's try with g928p firmware. And it worked!...Now where is the problem then??? The problem is firstly it updated again and again (2 times) ...and now I have a activate this device in settings...not only that there are some Sprint bloatware installed...and the most important thing...I can't make a call using my sim...Now I'm super paranoid...I don't know what to do...I tried g928f firmware...and it doesn't work...is it locked???? If it is what can I do to unlock it???(I'm not in USA or anywhere where Sprint works...so that wouldn't work) is there any way to use g928p bootloader on g928f firmware??? Is there any way to get my device working again with 7.0 without this locking??? I'm looking for expart advice...please help me...!!!
why can not you call. what message you get or what is happening more excited ?
why can't you call? use the default firmware from sammobile. and dont forget to download the LATEST version and flash it using ODIN
There is two version for g928p the cdma and the gsm version so search the two firmware in google
Literally no matter what I do. I cannot flash ANYTHING in Odin to either revert back to 7.0 or stock 8.0. Its not flashing any version of 7 or 8 and its not flashing any U firmware or AT&T firmware.
What am I doing wrong. I flashed 8.0 with the intent to be able to revert back to stock 7.0 once official Oreo rolled out and I literally cant do anything in Odin. I've tried odin 3.13 and 3.12 prince version. HALP
update: flashed G930UUEU4BRD1 using odin 3.12 successfully. phew
As far as I know, the newest Oreo version of AT&T is CRE4, not BRD6 as you say
SKv.DinDin said:
As far as I know, the newest Oreo version of AT&T is CRE4, not BRD6 as you say
Click to expand...
Click to collapse
You may be speaking about where I said CRD6, that is a version of Oreo that doesn't have much difference than the latest version of Oreo CRE4. Most of them after release have been minor changes. I was not flashing back to BRA1 to constantly flash the newest update of Oreo. I have an unlocked s7 so I can flash any carrier but eventually when the official oreo firmware comes out for either tmobile or the unlocked 930 varient i will be switching back to OTA updates
aarongotgame said:
You may be speaking about where I said CRD6, that is a version of Oreo that doesn't have much difference than the latest version of Oreo CRE4. Most of them after release have been minor changes. I was not flashing back to BRA1 to constantly flash the newest update of Oreo. I have an unlocked s7 so I can flash any carrier but eventually when the official oreo firmware comes out for either tmobile or the unlocked 930 varient i will be switching back to OTA updates
Click to expand...
Click to collapse
You tried with patched odin? Odin v3.13.1 3B.
anarasgarli said:
You tried with patched odin? Odin v3.13.1 3B.
Click to expand...
Click to collapse
The issue was probably that I needed to put home file in csc and exclude the csc file and then factory reset and clear caches. I probably ended up factory reset before Odin and didn't activate USB debug or the files I was using were corrupt. Since then I've just flashed TMobile Oreo that came out a few days ago and I'm gonna just use official ota for future updates
aarongotgame said:
The issue was probably that I needed to put home file in csc and exclude the csc file and then factory reset and clear caches. I probably ended up factory reset before Odin and didn't activate USB debug or the files I was using were corrupt. Since then I've just flashed TMobile Oreo that came out a few days ago and I'm gonna just use official ota for future updates
Click to expand...
Click to collapse
Looks like same problem with Galaxy S8, just search Stuck 32% error at Galaxy s8.
Reverting back from Oreo to either Nougat or Marshmallow
I am a newbie here.. Recently my ATT Galaxy S7 received Oreo upgrade and I am not at all liking it.
Can someone please guide me if it's possible to go back to Nougat or even marshmallow (preferable). If yes, what would steps for same..
My device is SM-G930A. Originally ATT device and now it's unlocked by ATT.
My device is currently NOT rooted , I am OK with rooting it.. I would appreciate if someone can help me with steps for same as well..
Thanks in advance..
I hate ATT. I hope their stupid company dies soon.
Anyway, I'm trying to flash my ATT S8+ that is running Android 7.0 with Android Pie. I first attempted to use Frija and it said that the ATT "CSC code not supported". I then tried SamFirm and when I input the phone model SM-G955U, it doesn't show the "United States" Region option.
Ideally, I would like to flash my phone with an unbranded Android Pie. What do I do?
UPDATE: I am able to find many different firmware files on SamFrew. However, I still need to know if I can flash an unbranded XAA file from there?
Will it work? And do I need a modded version of Odin to flash? I came across some guy's youtube tutorial that says only to use a modded Odin to flash unbranded firmware on an ATT Samsung phone, but unfortunately his video is from three years ago and so I'm not sure if the modded Odin he's linked to will be compatible and be able to flash the much recent released firmware updates.
UPDATE: Issue resolved. I went ahead and flashed it and it worked.
HaplessK said:
I hate ATT. I hope their stupid company dies soon.
Anyway, I'm trying to flash my ATT S8+ that is running Android 7.0 with Android Pie. I first attempted to use Frija and it said that the ATT "CSC code not supported". I then tried SamFirm and when I input the phone model SM-G955U, it doesn't show the "United States" Region option.
Ideally, I would like to flash my phone with an unbranded Android Pie. What do I do?
UPDATE: I am able to find many different firmware files on SamFrew. However, I still need to know if I can flash an unbranded XAA file from there?
Will it work? And do I need a modded version of Odin to flash? I came across some guy's youtube tutorial that says only to use a modded Odin to flash unbranded firmware on an ATT Samsung phone, but unfortunately his video is from three years ago and so I'm not sure if the modded Odin he's linked to will be compatible and be able to flash the much recent released firmware updates.
UPDATE: Issue resolved. I went ahead and flashed it and it worked.
Click to expand...
Click to collapse
Glad that it worked for you. Thanks for sharing