Dear All,
I have bought this phone
Asus Zenfone Max Pro M1 (Black, 64 GB)
I installed IBM MaaS360 for Corporate Access. That created the Work Profile.
After that, when I am trying to install any App in that "Work Profile", it fails giving following series of errors.
1) Screen comes "SeemPJService has stopped".
2) Then install fail screen comes.
I am pasting screenshots for two Apps that I tried installing on "Work Profile".... Cisco AnyConnect and IBM Bluepages.
Both have same problem... I am attaching the screenshots... Also screenshot with my build details.
PLS Note, I have no problem in installing new Apps in normal/Default profile... It seem to be an issue with the WorkProfle feature of Zenfone.
Also note, clearly there is Work Profile Icon visible in the App install to indicate that failure is in "Work Profile"...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
manukuchhal said:
Dear All,
I have bought this phone
Asus Zenfone Max Pro M1 (Black, 64 GB)
I installed IBM MaaS360 for Corporate Access. That created the Work Profile.
After that, when I am trying to install any App in that "Work Profile", it fails giving following series of errors.
1) Screen comes "SeemPJService has stopped".
2) Then install fail screen comes.
I am pasting screenshots for two Apps that I tried installing on "Work Profile".... Cisco AnyConnect and IBM Bluepages.
Both have same problem... I am attaching the screenshots... Also screenshot with my build details.
PLS Note, I have no problem in installing new Apps in normal/Default profile... It seem to be an issue with the WorkProfle feature of Zenfone.
Also note, clearly there is Work Profile Icon visible in the App install to indicate that failure is in "Work Profile"...
Click to expand...
Click to collapse
I have used Island app for running dual apps. It creates work profile and works ok. Maybe you can give that a try.
Can't switch
Thank you. But I need to be using given MaaS360 only since its prescribed my Corporate. That way Parallels is working fine.
Any other advice pls ?
Have the same issue
I have the same issue SeempJService stopped for any apps in work profile. Did anyone find a solution to this?
Same Issue
I am also facing the issue with SeempJService stopped for all the apps in work profile, Any solutions please ?
Related
Dear All:
We need test for our new products on Windows Mobile 6.0 and 6.1 devices.
iGate is small piece of software to replace system idle screen,
When you active system password and after device unused for predefined time, the idle screen will appear. Simply, iGate replace this screen and show iGate screen with necessary information as:
- Unread Mail
- Unread SMS
- Misscall
- Battery status
- Battery and signal levels
- Nearest appointment
- Owner Information
- Able to call to emergency number
Please follow below steps to test iGate:
Currently, iGate is working on Windows Mobile 6.0 or 6.1 only
1. Disable System’s password
2. Download iGate at:http://www.ppclink.com/download.php?id=1
3. Install iGate to your device, After installing please go to Start menu>> programs folder and then run iGate’s settings
3. Tap on Set up password and set the password and time to active iGate.
4. Wait for time out to see if iGate can active and enter password to see if it can go-in.
5. please send report/ comment to [email protected]
Thank you all very much for help us to test iGate.
Screen shot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ill try now
just installing now
will let you know how it goes over the weekend
thank you
liamhere said:
just installing now
will let you know how it goes over the weekend
thank you
Click to expand...
Click to collapse
Thanks so much for your help
Best,
can't install cab
not signed or parts missing
exe file
if you install from desktop win32 don't allow this file
liamhere said:
if you install from desktop win32 don't allow this file
Click to expand...
Click to collapse
You can get the CAB file here: http://www.ppclink.com/files/beta/PPCLink_Software_iGate.cab
thanks for the cab
on the phone and testing
THANK YOU
Hi guyz. I am no programmer but i came across this little tool and thought might share it with you guyz. I am just an End User and the complete credit to this App goes to the Admin of T2 Remote Touch
Okie herez the steps itz very simple :-
1) Download T2 Remote Touch Delta v2.0
2) Connect your Phone through Active Sync and Run the MSI file and Install T2 Remote Touch.
3) Next you will get and option to Install the App in the Phone with Message "Install T2 Remote Touch using the default Installation Directory". If you want to install the app in Phone Memory Click yes Else Select no and Select your Storage Card (Recommended).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) Now go to your phone and complete the setup.
5) COme back to your desktop and Finish the Setup.
6) You will see a window with 2 ip Addresses one to control through Internet and one through local WiFi or WLAN. Note down watever u need and press any key to continue.
7) Next Step is to configure the Server Right click the Remote Touch Server Icon in the SysTray and click Setup. These setup the port no. and the password for your server. If your server is behind a router then make sure to allow the port no. u set for port forwarding.
8) All done now start the app in your mobile. Most probably you will get a Authentication Failed, because the default settings might not work for everyone. Go to Menu > Setup. Put in there the IP Address, Port and Password you have and all done you can now control your PC from your mobile after connection.
9) Use Scroll to move through the desktop and tap for left click. I hope u can figure out the rest of it.
Hiya - I have the Desire and just got Wildfire for daughter - she is delighted-me less so as we have switched from PAYG to contract and I do NOT want her to go over her minutes, so have tried in vain to get the Mobile Account Checker from the Android Market. It shows up on my phone on the market, but not on hers! I tried scanning the barcode thing with her phone - not available. Tried with mine and bingo it is there. Any clues? I have it installed on my phone, but really need it for her!
see this thread http://forum.xda-developers.com/showthread.php?p=7496814
and post #7 for fix
fishb00n said:
see this thread http://forum.xda-developers.com/showthread.php?p=7496814
and post #7 for fix
Click to expand...
Click to collapse
Been there, done that.....not working
dragona said:
Been there, done that.....not working
Click to expand...
Click to collapse
Did you try to install via the website with Fastinstall installed and activated?
Just syncing with appbrain doesn't work.
1. download and install appbrain from market
2. download, install, and open fast web install from market
3. follow on screen instructions to let fast web install integrate into appbrain
4. visit www.appbrain.com search for your application and hit the "install" button on the appbrain website
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. the application should then be magically pushed to your htc wildfire,
if not: check that wifi or 3g is enabled. if it still doesn't work, try "manage my apps" -> "sync with appbrain" in the appbrain application and wait a few seconds
Sync doesn't work since it opens the market page or tries to.
i guess you're mixing it with "perform installs"
i noticed that sometimes i click install on the website, but nothing happens. even when wifi is enabled ... so i did the steps @ #5 and it worked then ... just a personal workaround. nothing official
i found a topic at g4 tattoo
http://forum.xda-developers.com/showthread.php?t=645286
like simulate screen resolution higher.
but it need root first.
i m not sure how to do root on g8.
maybe anyone who already root can try it out.
Sent from my HTC Wildfire using XDA App
Greetings.
I having a issue with connection setting page in start menu\setting\connections\connections
its appears everything white.
doesnt appear link to add new connection or edit my current conections
i wish for someone can help me, please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wm6.5.3 29002 build
touch pro 2
i had a problem like this, probably not related but ill explain anyway now that ive mentioned it
*linking a .lnk directly to the "advanced" tab caused me to have issues like the one your having = unable to make/edit a connection.
*for some reason it needs to load the connection in "tasks" before showing it in "advanced" so linking me .lnk to the "tasks" tab fixed my issue.
however, i suggest you run the htc connection setup, or ConnectionSetupAuto.exe.
this will add a new connection and youl be able to see/edit the connection settings
Rn
raving_nanza said:
...however, i suggest you run the htc connection setup, or ConnectionSetupAuto.exe.
this will add a new connection and youl be able to see/edit the connection settings..
Click to expand...
Click to collapse
Hardly, I suppose. The menu interface should be visible without any connection setup. Example - stock rom for any non-htc device.
My old Asus has no first boot setup or whatever like my Leo but Connection menu interface is available for manual setup.
It looks like either OP has problems with mui, or some "interface tweaks" had ruined the menu....
Suggestions:
1. Check mui
2. Do not cook in your custom tsk and all graphic custom **** and try to make close to stock rom.
Greetings. Well my connection was added but i wasnt see it
I find the solution, the problem was in the .rgu in ExtendedPkg from oem directory was changed by mistake. im using osbuilder. im just dump again my stock rom and change it, Now work fine.
Thanks all
Till yesterday everything was fine but today i got error message that screen mirroring not connected due to hardware failure so i restarted my phone.
Actually i flashed Something from XMG Beta Tester facebook group, they said by this thing XmodGames will start working on my phone.
After restart im getting an error.
See screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: All i did today was changed my SE for Android Status to permissive and again its on Enforcing now.
Edit 2: Some one told me to Format my phone and Restore to backup, so i have put my phone to backup, and lets see if it fixes the issue.
HELP Me: Nothing worked.
Sent from my SM-N9005 using Tapatalk
hi there,
screen mirroring does not work on modified firmwares so if your device status is not official (i.e. custom) screen mirroring will not work. What you can do is to reflash your firmware to official. OF course you will lose root and your SE for Android Status will be resest to enforcing.
I previously mentioned to follow this, don't know if you got the message or not, http://forum.xda-developers.com/showpost.php?p=55141822&postcount=228
I had the same problem on my samsung galaxy tab s 10.5
This link helped me and I was able to get it work props to who ever came up with this. I was not able to post a link I am sorry for not giving credit.
[Samsung S5] Unable to start the Screen Mirroring because of a hardware issue
if you have a problem with the screen mirror s5 samsung smart tv? This problem occurs in samsung s5 after rooted samsung mirror screen will not work below is the solution:
open x-plore or file manager [root access]
GoTo system/build.prop editing via a text editor
Add the line :
- wlan.wfd.hdcp = disable (remove space after)
- save and reboot your device
finished now you can connect the screen mirroring with smart tv
Thanks.