Related
so i just doing a clean install of the beta 3 rom, i did follow the instruction that written in the thread but some how after installing the update when i'm about to reboot into system it keeps rebooting into the recovery. so i decided to clean wipe and re-flash the rom, and some how it says that there's no rom installed. i've tried to install other custom rom like, LOS 15 and Liquid Remix, but it's still the same, keep booting to recovery and showing that there's no rom installed. plz help...
Go to twrp > wipe > format data > yes
Then transfer oos OB 3 to your phone, use adb push command is better than copy paste(not sure why because sometimes i copy pasted into phone, sometime it bootloop or storage not recognised)
Flash it, then flash magisk 15.2. then reboot. It should work fine. Unless you use a not compatible twrp version.
thanks for ur solution before, but can u tell me the compatible twrp is, cuz i'm using the twrp 3.2.1 by blu spark and it keeps booting into recovery
You need to flash no verity zip. If you are decrypted.
"You need to flash no verity zip. If you are decrypted. "
Thanks god for this comment, use about 2 hours digging around forums and re-flashing, wiping, trying diffrent TWRPs, different roms. And when I found this comment I just isntalled the zip and it worked within 10 seconds.
Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Pobi123 said:
Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Click to expand...
Click to collapse
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
BlueCyclone said:
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
Click to expand...
Click to collapse
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Pobi123 said:
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Click to expand...
Click to collapse
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
BlueCyclone said:
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
Click to expand...
Click to collapse
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Pobi123 said:
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Click to expand...
Click to collapse
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
BlueCyclone said:
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
Click to expand...
Click to collapse
Good News! Phone is back in full working order after flashing stock firmware. It was kinda scary though, I had to fix an error in Odin and then the phone wouldn't even boot up! Left it over night, booted it again and it worked fine Thanks a lot for your help, I'll try not to soft brick my device again
It's been a year already since I checked this sub and I am still using the TWRP that flickers and is chinese. Is there like an upgraded version for our device? Specifically for the non elite variant US version?
I think I might have screwed my phone because after I flashed a new rom(RR) my internal storage won't mount on recovery and when I connect it to pc. But I can see it in my phone when I'm on system(thank god) This is weird because I have not put any security lock on my phone before backing it up. So I am assuming that I need to update my TWRP to something latest to solve this issue, but I haven't been keeping up to this sub, i don't know if there's a newer compatible of TWRP.
And I also forgot why I did not went with the official one from TWRP. Maybe because it messes up the bootloader? or something like that, forgot since it's been a year already and I remember reading into a guide to use the chinese twrp.
[Solved]
If this happens to your device and you happen to use the chinese screen flicker fest TWRP, just go on and flash the latest official TWRP for our device. And you're going to be able to see your internal storage again.
you can either flash it ADB or from your recovery, but I flashed mine through TWRP
drckml said:
It's been a year already since I checked this sub and I am still using the TWRP that flickers and is chinese. Is there like an upgraded version for our device? Specifically for the non elite variant US version?
I think I might have screwed my phone because after I flashed a new rom(RR) my internal storage won't mount on recovery and when I connect it to pc. But I can see it in my phone when I'm on system(thank god) This is weird because I have not put any security lock on my phone before backing it up. So I am assuming that I need to update my TWRP to something latest to solve this issue, but I haven't been keeping up to this sub, i don't know if there's a newer compatible of TWRP.
And I also forgot why I did not went with the official one from TWRP. Maybe because it messes up the bootloader? or something like that, forgot since it's been a year already and I remember reading into a guide to use the chinese twrp.
Click to expand...
Click to collapse
Stop reading out of date articles, and use the latest Twrp here: https://twrp.me/leeco/leecolepro3.html
The Chinese bootloader issue is no longer an issue
* So to be clear about you issue you cannot boot to recovery.
* You do see you phone when you connect it to the computer...Right?
* BTW, I also have an X727
Your issue is most likely due to corruption and encryption
Backup whatever data you can and then use the All in One ( "AIT " ) tool to remove encryption ( NOTE: this is going to erase your data.
Next Using AIT install Twrp and magisk 17.1 or the easier way to resolve this may be to temporarily go back to stock.
Option 1
Try flashing the latest Twrp and magisk 17.1, using either ADB or AIT
After flashing boot into TWRP recovery
1. Go to "Wipe" and then to "Advanced Wipe".
2. Mark "Dalvik / ART Cache", "System", "Data" and "Cache".
3. "Swipe to Wipe" and proceed back the main menu.
4. Go to "Install".
5. Select the ROM zip file and then press "Add more Zips" and select the Gapps zip file, and then the Magisk file.
6. "Swipe to confirm Flash" and wait for some time.
7. After the flashing is finished, just reboot to recovery, check boxes to keep Twrp installed
8. Boot to system go through setup.
Option 2
You could flash my Recovery which includes Twrp and Root. ( Instructions at Link Below)
Afterwards you will be able to update the Twrp, and Root, then Flash whatever you want.
Le Eco Pro 3 X727 Twrp Backup : Clean Full Stock X727 recovery EUI 5.8.21s
https://forum.xda-developers.com/showpost.php?p=75021582
Option 3
Use All in One tool to restore my recovery, Flash a Stock Rom , or simply Flash TWRP/ROOT and then your Rom> Gapps> Magisk once again > Reboot to Recovery ( Check Boxes, for Twrp manager installation) Reboot to recovery > do not choose to make you drive read only! Clear Cache ( Not Dalvik) Reboot to system > Finished.
However, there is a faster way: @mauronofrio created a tool called: "TOOL ALL IN ONE"" and its great!
https://forum.xda-developers.com/and...ctory-t3358711
Its an excellent tool for keeping your drivers and adb up to date. Plus it will give ADB system wide privileges.
Mauronofrio's tool can also unencrypt your storage
After install the All in One Tool
Make sure to check for the AIT program for updates, to the tool itself and to ADB.
Next, click button to allow ADB privileges system wide.
Get more information here:*https://toolaio.tk**
XDA page for Le pro 3 : https://forum.xda-developers.com/le-...1#post71627491
* The all is one tool is excellent and you can use it to install everything you want.
* You can use it to unlock the bootloader.
* Remove Encryption
* Install TWRP,
* Install your Rom, Gapps and Magisk etc.
* The tool will also update your existing installation of ADB, Android Drivers, and provide system wide ADB privileges.
Of course use ADB or AIT once the phone is restored but you would be better off buying an OTG adapter and a USB 3.0 USB Flash drive. This way you can quickly make changes on the fly. I recommend buying at least 32GB usb 3.0 drive. Absolutely, the OTG adapter is the best method, because you will have all of your files available for quick installation and you can make numerous nandroid backups of your favorite rom installations. So If you get bored with one Rom, you can quickly restore another Rom in 5 to 10 minutes.
Again , if you do not use an OTG drive. Just use ADB or AIT for flashing your files, the steps are same as with any other phone.
Finally, look past any typos, I don't have time to proofread after spending so much time on a single post.
Thanks for the detailed response!
my issue was, I can go to recovery but it is not mounting my internal storage. It was showing as 0mb. I am aware that this is usually happens when you encrypt your device and back it up in the recovery and try to restore. But I never put any encryption on my device let alone it doesn't even ask me for a password when I am on the recovery. Anyway, I solved it by just flashing the latest official TWRP on our device. And I'm glad that I am finally away from the buggy chinese twrp.
I was just worried if there was any dangers on flashing the official latest twrp because I am seeing a lot of people getting bricked. So much for the halfassed allowing us to unlock our bootloader in this device by leeco.
Anyway, I really appreciate all that detailed guide. I will keep them in reference in the future.
drckml said:
Thanks for the detailed response!
my issue was, I can go to recovery but it is not mounting my internal storage. It was showing as 0mb. I am aware that this is usually happens when you encrypt your device and back it up in the recovery and try to restore. But I never put any encryption on my device let alone it doesn't even ask me for a password when I am on the recovery. Anyway, I solved it by just flashing the latest official TWRP on our device. And I'm glad that I am finally away from the buggy chinese twrp.
I was just worried if there was any dangers on flashing the official latest twrp because I am seeing a lot of people getting bricked. So much for the halfassed allowing us to unlock our bootloader in this device by leeco.
Anyway, I really appreciate all that detailed guide. I will keep them in reference in the future.
Click to expand...
Click to collapse
That's great!
In the future
If you have an encryption issue again, and you have latest tarp and magisk.
Just format storage and reboot to recovery, then wipe and issue will be resolved.
.
HMSS013 said:
Had my new OP5 rooted and almost everything was right in the world, but i flew too close to the sun by uninstalling a few apps I thought were expendable and eventually Google Play Services started crashing. When all troubleshooting failed I ended up flashing a fresh copy of OxygenOS (5.1.7) to my device, but every attempt to re-root the device has failed.
The first obstacle I ran into was that there was no access to Internal Storage in TWRP, I was able to fix that by Wipe > Format Data and then using Advanced Wipe to clean Dalvik/Cache/System/Data for good measure.
My next issue was that TWRP returned Error 7 when attempting to flash the stock OOS rom... after some digging I was able to clean the 'asserts' line from the updater-script file and now the rom will flash.
The headache has been getting the device re-rooted, and I feel like I've tried everything. I have to flash the SuperSU or Magisk zip (both fail to root the device) before reboot because the dm-verity encrypts on first boot and after that I can't access any storage to flash from internal memory. The three different dm-verity patches I've found don't prevent it. I also tried 'fastboot oem disable_dm_verity' to try and stop it but after talking with the device fastboot returns 'unknown command'.
My final effort to get around it was to flash a kernel that didn't force dm-verity (blu_spark kernel) but that returns Error 1: 'Unsupported Android Version' when I attempt to flash it.
I've tried dozens of variations on this, including a Lineage OS rom instead and also trying to sideload certain zips, but still no dice. Any and all help would be appreciated.
Click to expand...
Click to collapse
Which rom do you want to install?
HMSS013 said:
The first obstacle I ran into was that there was no access to Internal Storage in TWRP, I was able to fix that by Wipe > Format Data and then using Advanced Wipe to clean Dalvik/Cache/System/Data for good measure.
Click to expand...
Click to collapse
Hi, this one is because of your TWRP. Please flash Codework's TWRP and try that with it. It should solve your issue for sure. (same thing happened to me while I tried installing custom roms and every time I needed to wipe everything to see my internal storage again)
This guide can help you out with Error 7 on TWRP https://forum.xda-developers.com/showthread.php?t=2522762
I do believe your this issue you're having caused by TWRP. Also after rooting the phone, install magisk app. (you don't need to install supersu, it comes with magisk). After rebooting into system reboot your phone again once more it should show up on magisk app that you've successfully rooted your phone. Remember after flashing magisk you need to reboot twice in order for phone to realize it. Please try the steps I told you and let me know.
Also you don't need to flash dm-verity patch at all.
Try clean flash instructions with Codework's TWRP and root it with latest Magisk.
.
.
HMSS013 said:
I actually really like the Oreo version of OxygenOS, so when I had to resort to re-flashing to fix this mess I dug up one of the stock (5.1.7) roms, it served me well (assuming I can get it rooted, lol).
I'd be willing to move to Lineage if I absolutely have to, but if not, I'd really like to keep Oreo if at all possible.
Click to expand...
Click to collapse
For 5.1.7 try this twrp https://drive.google.com/file/d/1UlTftbe6wooAs4Fp0cjwXlOKmfQHgdfL/view?usp=drivesdk along with magisk 17.1.
Clean flash is recommended. If it didn't help, please list your steps again(detailed).
Don't use supersu and skip the other suggestions for now please.
.
Hi All, I have been reading various threads here and searching on Google for finding a method that truly works for successfully installing a custom ROM, getting TWRP installed and rooting with Magisk. So far, all I have found are numerous and usually contradictory methods and about 7 or 8 different versions of TWRP (so which one is completely stable and working properly?). I have tried several methods over the past two weeks and none of them are working completely.
Sometimes, I'll get a version of TWRP installed, but then trying to reboot to recovery results in a "system has been destroyed" image. Or I'll succeed in getting a custom ROM installed, but Gapps will fail with error 20 or error 70 or there's not enough space on the system partition (and I'm just trying to install the Pico version). Even I double check that the Gapps version matches the ROM version I've used, but still get an error 20 displayed.
From what I had read on numerous threads, it seemed like CosmicDans TWRP would be the one I should go with. I downloaded both of his files (the fastboot image and the zipped installer) and fastboot his "boot-recovery.img" that was specifically for fastboot only and from that recovery, I installed his "TWRP-Installer-3.2.1-with-Tissot-Manager-2.5.zip". Everything appeared as if successfully installed as per the logs, but immediately upon attempting to reboot to recovery, I get the "system has been destroyed" image.
What I want to do is:
Get a working custom ROM (preferably Pie) installed
Install Gapps
Install a working TWRP (that will not display "system has been destroyed" whenever trying to boot to recovery)
Finally, install Magisk and root my phone
Can anyone suggest a site or link or a post somewhere that would explain everything correctly and is actually working? This has been a very frustrating experience. I'm almost sorry that I even bought the Mi A1. Never had any problems installing custom ROMs or rooting the OnePlus devices. All I'm left with currently is an expensive paperweight.
Thanks so much!
Cheers
From your description, I'm certain that you do this on a Pie stock rom right? the installer never work on Pie stock and will cause system destroy. Just hotboot TWRP. And for the Gapps, I think it's due to the time you install it. From my experience, install Gapps after rom and before Magisk usually work. Install after magisk or custom kernel will somehow cause the same issue that you described.
Oh, in case you want to install LineageOS, you have to come to the LOS16 thread and download the TWRP from there, it's the only TWRP that can install LOS16.
Never_Sm1le said:
From your description, I'm certain that you do this on a Pie stock rom right? the installer never work on Pie stock and will cause system destroy. Just hotboot TWRP. And for the Gapps, I think it's due to the time you install it. From my experience, install Gapps after rom and before Magisk usually work. Install after magisk or custom kernel will somehow cause the same issue that you described.
Oh, in case you want to install LineageOS, you have to come to the LOS16 thread and download the TWRP from there, it's the only TWRP that can install LOS16.
Click to expand...
Click to collapse
Thank you for your reply. When I first started the process to change to a custom ROM, I was on stock Pie. But one of the times I was wiping the device after one more problem, I accidentally also wiped Internal Storage as well. I didn't have much there since I had already backed some things up in advance. Now it's virtually empty. The steps I take are:
1. Hotboot TWRP
2. Install Custom ROM
3. Hotboot TWRP again
4. Install Gapps
This is where I usually have some problem. It's the process of installing Gapps that creates some error.
I also did attempt to install LineageOS 16 using the TWRP recovery that was linked in the post. Follow the instructions precisely I believe and now when it's time to install Gapps, I get error 64. I can't understand why. I am attempting to install "open_gapps-arm64-9.0-nano". This should be compatible with the Mi A1 with LineageOS 16 from what I am able to tell.
No matter what TWRP version I use, no matter what custom ROM I try, no matter what steps I take, there is always some issue that prevents me from completing any installation. But the abundance of so many conflicting posts don't help either. One post will state to use a specific TWRP and certain steps; another post will suggest completely different steps using another TWRP; and yet another post will provide different steps still. In some instances, there will be steps listed in the script on the phone regarding the next steps after the ROM installation that are completely different then the steps provided in the post for that ROM in the forum.
It would just be tremendously helpful to get some instructions that actually do work. As of now, I'm about ready to dump this phone in the trash bin. It's horrible. I can't even tell if it might be decent eventually since I never can get anything installed.
Thanks again for your reply Never_Sm1le.
Cheers.
There is no permanent TWRP install for android 9 on MiA1 as far as i know.
Hotboot works just perfect.
Brianne8 said:
Thank you for your reply. When I first started the process to change to a custom ROM, I was on stock Pie. But one of the times I was wiping the device after one more problem, I accidentally also wiped Internal Storage as well. I didn't have much there since I had already backed some things up in advance. Now it's virtually empty. The steps I take are:
1. Hotboot TWRP
2. Install Custom ROM
3. Hotboot TWRP again
4. Install Gapps
This is where I usually have some problem. It's the process of installing Gapps that creates some error.
I also did attempt to install LineageOS 16 using the TWRP recovery that was linked in the post. Follow the instructions precisely I believe and now when it's time to install Gapps, I get error 64. I can't understand why. I am attempting to install "open_gapps-arm64-9.0-nano". This should be compatible with the Mi A1 with LineageOS 16 from what I am able to tell.
No matter what TWRP version I use, no matter what custom ROM I try, no matter what steps I take, there is always some issue that prevents me from completing any installation. But the abundance of so many conflicting posts don't help either. One post will state to use a specific TWRP and certain steps; another post will suggest completely different steps using another TWRP; and yet another post will provide different steps still. In some instances, there will be steps listed in the script on the phone regarding the next steps after the ROM installation that are completely different then the steps provided in the post for that ROM in the forum.
It would just be tremendously helpful to get some instructions that actually do work. As of now, I'm about ready to dump this phone in the trash bin. It's horrible. I can't even tell if it might be decent eventually since I never can get anything installed.
Thanks again for your reply Never_Sm1le.
Cheers.
Click to expand...
Click to collapse
Your reply makes me want to stay on LOS 15.1 even more. So many weird problems happen in LOS 16
I followed all the instructions of Resurrection Remix and TWRP is installed and magisk works perfect.
Hello friend, I am currently on Lineage OS 16.0 with Magisk, Opengapps and TWRP installed. I can boot to recovery with no problems at all; in fact, I used the flashed TWRP to install Magisk.
Here are the steps I took:
Download the TWRP boot img and TWRP installer by CosmicDan (Link below)
Copy the custom rom ZIP, TWRP installer, Magisk installer and Gapps into your SD card
Reboot your device to bootloader
Boot into TWRP using
Code:
fastboot boot boot-recovery.img
do NOT flash via fastboot
Go to Wipe>Advanced Wipe and wipe System, Dalvik, Data, Internal Storage
Press the home button and proceed to flashing the custom rom ZIP
After flashing, reboot to BOOTLOADER then do step 4 again
Flash Gapps, TWRP Installer, then Magisk Installer. You should flash TWRP first before Magisk
Reboot to system and you're good to go
Note that if you are installing Lineage OS and wish to receive nightly OTA updates, having an installed TWRP as your recovery might result in a bootloop after updating. Also, if you want to manually flash the nightly update, you need to boot to the TWRP variant of @flex1911 as flashing lineage using other TWRP will result in an error. I suggest not installing TWRP when using Lineage OS.
(Source: [ROM][OFFICIAL] LineageOS 16.0 for Xiaomi Mi A1)
Regarding your problem with flashing, try to check which slot you are currently in by going to TWRP>Reboot. Keep in mind that when you install a rom, it will always be installed to the inactive slot. For example if you are in slot A, your rom will be installed in slot B. After rebooting, your current active slot will be where the rom is installed. When installing Gapps or any addons, check the slot first. However, when flashing TWRP installer, it will patch both boot_a and boot_b and this is the reason why you need to install twrp first before magisk as TWRP also modifies the boot image.
Download:
Bootable TWRP
TWRP Installer
(Both files by @CosmicDan)
Cheers mate!
rexendz said:
Here are the steps I took:
Download the TWRP boot img and TWRP installer by CosmicDan (Link below)
Copy the custom rom ZIP, TWRP installer, Magisk installer and Gapps into your SD card
Reboot your device to bootloader
Boot into TWRP using
Code:
fastboot boot boot-recovery.img
do NOT flash via fastboot
Go to Wipe>Advanced Wipe and wipe System, Dalvik, Data, Internal Storage
Press the home button and proceed to flashing the custom rom ZIP
After flashing, reboot to BOOTLOADER then do step 4 again
Flash Gapps, TWRP Installer, then Magisk Installer. You should flash TWRP first before Magisk
Reboot to system and you're good to go
Click to expand...
Click to collapse
Thanks for the lengthy reply. However, those steps do not work as you have described. Since, if I wipe Internal Storage (as per your step 5), I just deleted all the files I copied previously in Step 2. What I did, was wipe everything, *then* copied all the files and tried to install. As soon as it try to install Gapps, I get Error 64 again. I am absolutely using "open_gapps-arm64-9.0-nano" and it always fails. I have attempted 11 or 12 times already, using different slots, using different dates of "open_gapps-arm64-9.0-nano" and ALWAYS Error 64. I don't know any other version of Gapps I should be trying. The arm64 versions never will work for me.
I give up. I'll just have to stick with stock ROM. No custom ROMs will work for me no matter which one I use or which version of TWRP I use. I already wasted too much of my life with this garbage phone.
ccalixtro said:
I followed all the instructions of Resurrection Remix and TWRP is installed and magisk works perfect.
Click to expand...
Click to collapse
Hi,
Which version of TWRP did you use? There's too many. I don't know which one is considered to be the right one.
Brianne8 said:
Thanks for the lengthy reply. However, those steps do not work as you have described. Since, if I wipe Internal Storage (as per your step 5), I just deleted all the files I copied previously in Step 2. What I did, was wipe everything, *then* copied all the files and tried to install. As soon as it try to install Gapps, I get Error 64 again. I am absolutely using "open_gapps-arm64-9.0-nano" and it always fails. I have attempted 11 or 12 times already, using different slots, using different dates of "open_gapps-arm64-9.0-nano" and ALWAYS Error 64. I don't know any other version of Gapps I should be trying. The arm64 versions never will work for me.
I give up. I'll just have to stick with stock ROM. No custom ROMs will work for me no matter which one I use or which version of TWRP I use. I already wasted too much of my life with this garbage phone.
Click to expand...
Click to collapse
Copy the files to your external SD card not internal storage. But if you don't have an ext SD card, don't wipe internal storage.
Also try to check if system is properly mounted when installing gapps.
May I ask what custom rom you are trying to install?
I suggest you try Pixel Experience as it already has a builtin Gapps so you dont have to flash opengapps.