Related
Hello there,
So, I have a Samsung Galaxy S5 G900R4 with U.S. Cellular. I've heard of rooting your phone, and I decided I'd give it a try. Now, the rooting went fine, and the phone was working like a charm, until I started to have some issues. SuperSU needed to update its binary, and I allowed it to try, but it continued to tell me that it could not update it. Hence, I let it reboot when it offered. Now, for whatever reason, the phone won't boot past the U.S. Cellular 4G logo that appears, it just sits there on that screen.
Now so far, I haven't been able to find anyone that has encountered this specific problem, as most people say their soft-bricks are bootlooping and whatnot. I'm not sure if my specific case is technically a soft brick, or something else, but I wanted to just return it to stock format. I loaded up Odin again, downloaded the 1.5g firmware file, and I got the SW REV CHECK FAIL error.
I did some research, and I searched EVERYWHERE, and the closest I could find to a solution was http://forum.xda-developers.com/showthread.php?t=2798396 <-- this thread. Which makes sense, when I read it. I'm guessing the bootloader is locked on my phone, or something. The problem is that this thread is for the Galaxy S5 G900AU, and I don't have that phone.
Maybe I'm just not searching on the web enough, or I didn't search the site well enough, but I have not been able to locate a similar set of AP, CP and CSC files for my specific model.
I would really appreciate it if someone could point me in the right direction or, if the issue I'm actually having with my phone is NOT a soft-brick and there is another solution, suggest another way for me to fix the phone.
Thank you.
First off, I'd try clearing the caches from recovery
If that fails, factory reset from recovery
If that fails, (And I'm not sure about stock firmwares with ODIN & locked bootloaders) I'd try flashing stock from ODIN also
Grab stock ROMs from here
sammobile . com / firmwares / database /SM-G900R4/
Can't link it here, as SM links are not allowed - just remove the spaces
*Detection* said:
First off, I'd try clearing the caches from recovery
If that fails, factory reset from recovery
If that fails, (And I'm not sure about stock firmwares with ODIN & locked bootloaders) I'd try flashing stock from ODIN also
Grab stock ROMs from here
sammobile . com / firmwares / database /SM-G900R4/
Can't link it here, as SM links are not allowed - just remove the spaces
Click to expand...
Click to collapse
Well last night I went ahead and used recovery to clear cache, and then I did a factory reset. I just did it again, now, but I guess I'll have to download the file from SM to try. I already have a stock ROM, but I can't remember where I downloaded it from, so it may actually be a 4.4.2 ROM or something, which would explain why it won't work. I'll wait for the 5.0 ROM to download and give it a try, should take a little more than an hour and a half, then I'll report back.
Xeretius said:
Well last night I went ahead and used recovery to clear cache, and then I did a factory reset. I just did it again, now, but I guess I'll have to download the file from SM to try. I already have a stock ROM, but I can't remember where I downloaded it from, so it may actually be a 4.4.2 ROM or something, which would explain why it won't work. I'll wait for the 5.0 ROM to download and give it a try, should take a little more than an hour and a half, then I'll report back.
Click to expand...
Click to collapse
Try this link, if it works, it won't work for long
Code:
http://am4-r1f4-stor08.uploaded.net/dl/800e713b-624b-4a91-a57c-1639c6b5071e
*Detection* said:
Try this link, if it works, it won't work for long
Click to expand...
Click to collapse
It worked, it's downloading now, just have to give it some time.
nice one
*Detection* said:
nice one
Click to expand...
Click to collapse
I really hope this works, when it finishes >.>
Any idea what's happening with the phone to cause it to stay at the U.S. Cellular screen?
I never let SuperSU reboot when I let it update the binaries
Could be a number of things, possibly just corrupted a file necessary for boot, but as SuperSU has root, it could be anything
I don't know the ins and outs of how SuperSU works, but I know a few carrier specific US S5s have a locked bootloader, Verizon, AT&T etc - not sure if rebooting to allow the binary update requires an unlocked bootloader, maybe that bricked it, half assed attempt at a root process failed maybe
*Detection* said:
I never let SuperSU reboot when I let it update the binaries
Could be a number of things, possibly just corrupted a file necessary for boot, but as SuperSU has root, it could be anything
I don't know the ins and outs of how SuperSU works, but I know a few carrier specific US S5s have a locked bootloader, Verizon, AT&T etc - not sure if rebooting to allow the binary update requires an unlocked bootloader, maybe that bricked it, half assed attempt at a root process failed maybe
Click to expand...
Click to collapse
As far as I know, though, U.S. Cellular has confirmed that this device has an unlocked bootloader. And besides that, if it were locked, wouldn't that have come up as an issue when I rooted the device? I used the CWM custom recovery tool.
On a similar note, I'm not even sure if the problem was a locked bootloader. It's just that, from what I've read with other people having the same issue, they solved it by excluding the BL file from the flash and instead only using the AP, CP and CSC files.
Xeretius said:
As far as I know, though, U.S. Cellular has confirmed that this device has an unlocked bootloader. And besides that, if it were locked, wouldn't that have come up as an issue when I rooted the device? I used the CWM custom recovery tool.
On a similar note, I'm not even sure if the problem was a locked bootloader. It's just that, from what I've read with other people having the same issue, they solved it by excluding the BL file from the flash and instead only using the AP, CP and CSC files.
Click to expand...
Click to collapse
If you can flash anything custom from ODIN, bootloader is unlocked, afaik, locked bootloaders require a right mess on to get anything flashed to them
To root with a locked bootloader, is easily possible if you're on a certain KitKat ROM, and use Towelroot - other than that, (From what I've read), you need to use specific tools, so it sounds like your bootloader is indeed unlocked - which makes this next ROM flash, much more likely to work using only ODIN
Use ODIN 3.10.6 though
My experience with the S5 is with an unlocked bootloader (G900F), so I can only quote what I know about locked from what I've read, but it sounds like that doesn't matter in your case
*Detection* said:
If you can flash anything custom from ODIN, bootloader is unlocked, afaik, locked bootloaders require a right mess on to get anything flashed to them
To root with a locked bootloader, is easily possible if you're on a certain KitKat ROM, and use Towelroot - other than that, (From what I've read), you need to use specific tools, so it sounds like your bootloader is indeed unlocked - which makes this next ROM flash, much more likely to work using only ODIN
Use ODIN 3.10.6 though
My experience with the S5 is with an unlocked bootloader (G900F), so I can only quote what I know about locked from what I've read, but it sounds like that doesn't matter in your case
Click to expand...
Click to collapse
It worked! Thank you so much for the help, I really appreciate it.
Well, my warranty is now void. Is there a safer way to root the phone, or should I just leave it be?
Xeretius said:
It worked! Thank you so much for the help, I really appreciate it.
Well, my warranty is now void. Is there a safer way to root the phone, or should I just leave it be?
Click to expand...
Click to collapse
Great
Flashing a stock ROM won't void your warranty, but if it is indeed void (KNOX 0x1), then just flash this with ODIN
http://download.chainfire.eu/404/CF-Root1/CF-Auto-Root-klteusc-klteusc-smg900r4.zip
Tripping KNOX only happens when you flash something not signed by Samsung, IE: A custom recovery, ROM or Kernel etc
I have the same issue, same phone I ended up flashing a custom ROM because I luckily flashed twrp before it bricked on the us cellular screen.. How did you fix this I just want to get back to stock remove my root completely
Hello,
Samsung Note 3
I REALLY want to root my phone to help test out the beta of f.lux. You can look it up if you want, should take you a a peachy orange page. Anyway, I really want that on my phone, and it needs root, and I've NEVER rooted a phone before, and I'm not sure what I'm doing.
I want to follow [this guide](http://www.phonearena.com/news/How-to-Root-the-Verizon-Samsung-Galaxy-Note-3_id48247) PhoneArena link, but it doesn't say what android version it needs, and that worries me.
One more thing, I downloaded a file called "fastboot" and it has something to do with ADB that disables certain apps so that I'm not nagged to update. I'm on 4.4.4, and I can't find that file, I think it's in the root of C:\ but I ran them and it didn't work. So if I could reenable those apps to get on lollipop or marshmallow, if rooting would be easier, I'd do that. I've searched the forum, but I need baby steps.
Thanks.
timpster said:
Hello,
Samsung Note 3
I REALLY want to root my phone to help test out the beta of f.lux. You can look it up if you want, should take you a a peachy orange page. Anyway, I really want that on my phone, and it needs root, and I've NEVER rooted a phone before, and I'm not sure what I'm doing.
I want to follow [this guide](http://www.phonearena.com/news/How-to-Root-the-Verizon-Samsung-Galaxy-Note-3_id48247) PhoneArena link, but it doesn't say what android version it needs, and that worries me.
One more thing, I downloaded a file called "fastboot" and it has something to do with ADB that disables certain apps so that I'm not nagged to update. I'm on 4.4.4, and I can't find that file, I think it's in the root of C:\ but I ran them and it didn't work. So if I could reenable those apps to get on lollipop or marshmallow, if rooting would be easier, I'd do that. I've searched the forum, but I need baby steps.
Thanks.
Click to expand...
Click to collapse
If you're just looking to try out f.lux you could give Cf.lumen a try first. It has a non-root mode.
If you want to root you can just flash a custom recovery like TWRP with Odin.
Sjant said:
If you're just looking to try out f.lux you could give Cf.lumen a try first. It has a non-root mode.
If you want to root you can just flash a custom recovery like TWRP with Odin.
Click to expand...
Click to collapse
You say, just flash, as if there is no risk. I want to get it right, no bricking. I'm on 900V (V for verizon), and I want a quick safe way to root. Also, thank you for mentioning Cf.lumen, I do have it, and the nonroot looks like ****, yes it works, but it's not remotely the same.
timpster said:
You say, just flash, as if there is no risk. I want to get it right, no bricking. I'm on 900V (V for verizon), and I want a quick safe way to root. Also, thank you for mentioning Cf.lumen, I do have it, and the nonroot looks like ****, yes it works, but it's not remotely the same.
Click to expand...
Click to collapse
I recommend visiting TWRP's website and pick out the latest version for your device and then flash the latest non-beta version of SuperSU which you can find here on XDA. Flash TWRP with Odin and then boot into recovery and simply reboot, it will then ask you if you'd like to root your device.
What model do you have? Find your model first then download TWRP recovery. Use odin to flash the recovery, then flash super su.
Odin - http://www.droidviews.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Supersu - https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
Complete edit.
O.K., so I see that TWRP has a backup option. If I use this option, and should I "brick" my phone, could I flash the TWRP in odin, and figure out how to restore the backup, and unbrick the phone if I screw up the root process? Because that would be ****ing amazing, and I'd root IMMEDIATELY if that's the case, because, no worries -- I'd always have a backup! I love backups.
You need Root for TWRP to backup .
Suggest you read the stickeid FAQS and guides .
timpster said:
Complete edit.
O.K., so I see that TWRP has a backup option. If I use this option, and should I "brick" my phone, could I flash the TWRP in odin, and figure out how to restore the backup, and unbrick the phone if I screw up the root process? Because that would be ****ing amazing, and I'd root IMMEDIATELY if that's the case, because, no worries -- I'd always have a backup! I love backups.
Click to expand...
Click to collapse
First things first, EXACTLY what Note 3 model do you have? Go to Settings -> About -> Device model. If it is SM-N9005, that would be quite surprising, because we didn't get a 4.4.4 build.
American Note 3s got a 4.4.4 build, N900A, N900V (AT&T Note 3 and Verizon Note 3 respecitevly), and the methods for rooting THEM has nothing in common with the way a N9005 or N900 is rooted.
900V. Verizon, 4.4.****ing4. I had .3 but it kept nagging me to update like trial software and that was probably the end of my chances as I recall I most likely have a locked bootloader so I may not be able to do any of this.
Why can't I make a full backup on stock android anyway, seems like the responsible thing to do.
Verizon then use the verizon forum anything from here is wrong and may brick your phone .
Full backup requires a modified recovery therefore no longer stock .
Ah so it's the stock recovery that is used. So why do you think that lacks options for a full backup?
When you say use Verizon forums is that a section here or a dedicated Verizon forum?
Wondering if anyone in the know has heard of any development going on for this device? I recently bought one and it's not a bad phone for the price, but I've seen absolutely -nothing- on it anywhere online for the most part. It's barely root-able with what I've been able to find, and no custom recovery or really anything custom has popped up that I've seen.
Not sure if it's just that it's been only a few months since the phone came out, or if it's just not that great a phone. I upgraded from an HTC Desire 510 to this, and it was heavily customized/rooted/etc, and I want so badly to get back to where I was with it on this phone I cant stand it!
I also want to root my Galaxy J3! I just want to root it so I can use AdAway and Titanium Backup.
triiuzii said:
I also want to root my Galaxy J3! I just want to root it so I can use AdAway and Titanium Backup.
Click to expand...
Click to collapse
Right now rooting isn't the problem so much as keeping root. Because apparently the colonel has protection and will remove root whenever you reboot. That means things that require root on boot like backups, Xposed and a lot of other things won't work for us until someone complies a kernel with root protection removed. You can do some debloating and possibly the AdAway but that's about it right now.
*kernel. Damn voice to text.
That sucks. I upgraded from an LG Volt and I was able to do a whole bunch of stuff on it. The J3 is still very new, so hopefully development will happen soon.
I just got this phone if there is anything i can do to help move this along let me know. I have the virgin mobile one.
mallamike said:
I just got this phone if there is anything i can do to help move this along let me know. I have the virgin mobile one.
Click to expand...
Click to collapse
I guess that would depend on what you have experience with and what you can do. Thus-far root has been able to be achieved with Kingroot, though it wont stick through a power cycle (reboot/power off/etc), and using any of the methods available (at least that I'm aware of, only found two legitimate ones) to replace Kingroot with SuperSU (to facilitate having root stick past the reboot hopefully) causes a soft-brick every time forcing a re-flash of stock firmware through Odin.
At the very least make your voice heard, if nothing else hopefully more popularity will come this devices way and we'll see some development for it. My roommate is considering writing something for it, but it is a long process working solo, so anyone who has experience working with kernels or editing stock rom/writing custom roms feels up to helping out, shoot me a message and I'll get it over to him. He's a fairly experienced programmer and picks up what he doesn't already know pretty quickly.
Got one recently too. Would also appreciate any more information on rooting.
I have a J320A (AT&T) came stock with 6.0.1, can help test if needed
http://forum.xda-developers.com/android/development/recovery-teamwin-recovery-project-3-0-2-t3356616
I know this is an old thread, just making my rounds looking for anything on the J3 myself (SM-J320P Boost, Virgin, etc...) and have found TWRP & permanent root with Chainfire's SuperSU (system-less though). Everything is great except a lag issue with supersu. There is an exposed by wanum that works as well. Only app that has root issue so far is ES File Explorer. If anyone is still looking hope this helps.
zach
coolbeans2016 said:
http://forum.xda-developers.com/android/development/recovery-teamwin-recovery-project-3-0-2-t3356616
I know this is an old thread, just making my rounds looking for anything on the J3 myself (SM-J320P Boost, Virgin, etc...) and have found TWRP & permanent root with Chainfire's SuperSU (system-less though). Everything is great except a lag issue with supersu. There is an exposed by wanum that works as well. Only app that has root issue so far is ES File Explorer. If anyone is still looking hope this helps.
zach
Click to expand...
Click to collapse
Will this version of TWRP work on the Att variant running 6.0.1? Is there a way to root that device yet?
coolbeans2016 said:
http://forum.xda-developers.com/android/development/recovery-teamwin-recovery-project-3-0-2-t3356616
I know this is an old thread, just making my rounds looking for anything on the J3 myself (SM-J320P Boost, Virgin, etc...) and have found TWRP & permanent root with Chainfire's SuperSU (system-less though). Everything is great except a lag issue with supersu. There is an exposed by wanum that works as well. Only app that has root issue so far is ES File Explorer. If anyone is still looking hope this helps.
zach
Click to expand...
Click to collapse
Anything yet for J320A/Z models? (AT&T/cricket)
This version of TWRP won't work will it? Totally different phone?
EDIT: just realized the guy above has the same question... something tells me we won't see root on the ATT/cricket variants for a while.
TechShui said:
Anything yet for J320A/Z models? (AT&T/cricket)
This version of TWRP won't work will it? Totally different phone?
EDIT: just realized the guy above has the same question... something tells me we won't see root on the ATT/cricket variants for a while.
Click to expand...
Click to collapse
Try official TWRP of galaxy J2. Your variant shares the same specs as J2. Others also did this to galaxy On5, it works 100%.
what about the
SM-J320VPP = the verizon pre paid planversion. any working roots for me yet?
oh pretty pleeeeeez
Azhero said:
Try official TWRP of galaxy J2. Your variant shares the same specs as J2. Others also did this to galaxy On5, it works 100%.
Click to expand...
Click to collapse
So can you confirm this method works? Does OEM unlock setting in dev options unlock the bootloader on AT&T variant? If so couldn't I temp root and flash TWRP via Flashify?
AnierinB said:
So can you confirm this method works? Does OEM unlock setting in dev options unlock the bootloader on AT&T variant? If so couldn't I temp root and flash TWRP via Flashify?
Click to expand...
Click to collapse
It doesn't work tried it 3 times. I even tried other ones no luck. They locked this thing down. Im surprise chainfire haven't tried this phone yet.
Hi, guys! I understand it was an old thread, but I was referred here from Reddit. I have a Galaxy J3 (SM-J3109) purchased in Mainland China (Service provider is China Telecom). I rooted it with Kingo Root. Kingo Root stated that it successfully rooted the device, but the phone OS had given me warnings about unauthorized access to the device or something.
One week later (I did *not* reflash the phone nor install any applications after I rooted the phone) I found the phone stuck in an annoying bootloop. The device status is still "official" and the Knox counter is still set at 0x0.
Now that it's bootlooping I'd like to know if it's possible to take the applications and files off the phone before I factory reset it. It's not looking hopeful as I read similar threads from 2012 saying that once other Android devices bootloop, getting stuff off of them is impossible. I tried using ADB to take data off the phone (while Odin3 was detecting it being connected to the PC) but ADB doesn't detect the phone. Should I try a different cable?
Gotbootloopedtoomuch said:
Hi, guys! I understand it was an old thread, but I was referred here from Reddit. I have a Galaxy J3 (SM-J3109) purchased in Mainland China (Service provider is China Telecom). I rooted it with Kingo Root. Kingo Root stated that it successfully rooted the device, but the phone OS had given me warnings about unauthorized access to the device or something.
One week later (I did *not* reflash the phone nor install any applications after I rooted the phone) I found the phone stuck in an annoying bootloop. The device status is still "official" and the Knox counter is still set at 0x0.
Now that it's bootlooping I'd like to know if it's possible to take the applications and files off the phone before I factory reset it. It's not looking hopeful as I read similar threads from 2012 saying that once other Android devices bootloop, getting stuff off of them is impossible. I tried using ADB to take data off the phone (while Odin3 was detecting it being connected to the PC) but ADB doesn't detect the phone. Should I try a different cable?
Click to expand...
Click to collapse
Best advice would be to try flashing the stock firmware with odin. That shouldn't delete any of your data and will usually fix a bootloop. You can Google your phones stock firmware and see if you can download it.
darknaio said:
Best advice would be to try flashing the stock firmware with odin. That shouldn't delete any of your data and will usually fix a bootloop. You can Google your phones stock firmware and see if you can download it.
Click to expand...
Click to collapse
Thank you so much! I tried using Odin to flash a software update and it worked perfectly. The phone is back up and running and all of the files are still there!
Right now i have TWRP 3.0.2 with supersu and i havent lost root yet also had no problem switching between backups, xposed working fine and also overclock too with setcpu, im currently running 5.1.1 using j320FN but TWRP was from j320F, i will put up links to the files if any of you are willing to try its up to you.
TWRP flash through odin : http://www.mediafire.com/download/blk7qa90vs6wik3/TWRP_3.0.2-0_SM-J320F.tar.tar
Supersu flash through recovery then update through playstore then install busybox after through playstore : http://www.mediafire.com/download/cpv2c71cp11x41f/UPDATE-SuperSU-v2.76-20160630161323.zip
Remember to turn on usb debugging and turn on oem unlock before flashing recovery, also if you manage to get recovery press they grey box on the right to change language to english. Hope this might help somebody on here because we really need full root for everyone.
Hi all,
It's been a few yrs since I've flashed a phone (the last being my SGS1 variant) and I'm very out of practice. That being said, I just need a little help in understanding how to flash my SGS4. So far, I've had this phone for yrs and I would've jumped to custom roms as I did normally but there was the whole KNOX debacle and I didn't want to do anything to damage my phone - while within warranty. I've been out of the loop for awhile, so I need a little help in my choices here.
My phone is still running on it's original software (that's right, I completely haven't updated in yrs), so it's a 4.2.2 and the build is I9505XXUBM4 (pre-KNOX). If I am going to root, I was thinking that I should use the method from this thread: [GT-I9505 + GT-I9505G] CF-Auto-Root. Would I be right in using this method or is there something better?
Secondly, I've only ever used CWM. I'm assuming the recovery to use currently is TWRP since I've seen it brought up in a good number of threads. Can I make a nandroid with TWRP the same way it was done with CWM or do I need to find another way to backup my data?
Lastly, this is the rom I'm leaning towards; [JDCTeam][6.0.1][9 July] The Android Open Source Project MOB30M. Could I just flash this on top of my stock or do I have to update first and then flash this?
TIA for your responses.
Oniyuri said:
Hi all,
It's been a few yrs since I've flashed a phone (the last being my SGS1 variant) and I'm very out of practice. That being said, I just need a little help in understanding how to flash my SGS4. So far, I've had this phone for yrs and I would've jumped to custom roms as I did normally but there was the whole KNOX debacle and I didn't want to do anything to damage my phone - while within warranty. I've been out of the loop for awhile, so I need a little help in my choices here.
My phone is still running on it's original software (that's right, I completely haven't updated in yrs), so it's a 4.2.2 and the build is I9505XXUBM4 (pre-KNOX). If I am going to root, I was thinking that I should use the method from this thread: [GT-I9505 + GT-I9505G] CF-Auto-Root. Would I be right in using this method or is there something better?
Secondly, I've only ever used CWM. I'm assuming the recovery to use currently is TWRP since I've seen it brought up in a good number of threads. Can I make a nandroid with TWRP the same way it was done with CWM or do I need to find another way to backup my data?
Lastly, this is the rom I'm leaning towards; [JDCTeam][6.0.1][9 July] The Android Open Source Project MOB30M. Could I just flash this on top of my stock or do I have to update first and then flash this?
TIA for your responses.
Click to expand...
Click to collapse
For first you MUST update your phone, if you have root, update with odin on the latest firmware version and then flash flash recovery(cwm, twrp, philz) and flash the rom, because firmware request of the rom is android lollipop stock. Try cyanogenmod 13 nighty for this smartphone
Alessandro's said:
For first you MUST update your phone, if you have root, update with odin on the latest firmware version and then flash flash recovery(cwm, twrp, philz) and flash the rom, because firmware request of the rom is android lollipop stock. Try cyanogenmod 13 nighty for this smartphone
Click to expand...
Click to collapse
Ok, so after I root the phone, can I go straight onto CM13 or do I still have to get lollipop first and then flash CM?
I'm still trying to avoid getting KNOX on the phone.
Oniyuri said:
Ok, so after I root the phone, can I go straight onto CM13 or do I still have to get lollipop first and then flash CM?
I'm still trying to avoid getting KNOX on the phone.
Click to expand...
Click to collapse
Then you install lollipop stock, make root , flash recovery and then flash cm13
Oniyuri said:
Ok, so after I root the phone, can I go straight onto CM13 or do I still have to get lollipop first and then flash CM?
I'm still trying to avoid getting KNOX on the phone.
Click to expand...
Click to collapse
Knox does matter once you're on a custom ROM.
Most content creators recommend to use the latest modem and bootloader in order to avoid problems.
You don't necessarily have to update the whole ROM to have the newest modem and bootloader, there are Odin flashable packages.
I don't know if CF-Auto-Root works with 4.2. I know it works for 4.4 and above.
As long as you do your wipes (this means system, data, cache, dalvik) you can flash anything over anything.
Yes, you can do nandroid backups, but TWRP and CWM backups are not compatible with each other. Also, TWRP has a problem with TouchWiz backups, meaning you can make and restore a TouchWiz backup, but it either won't boot or will give you lots of errors.
GDReaper said:
Knox does matter once you're on a custom ROM.
Most content creators recommend to use the latest modem and bootloader in order to avoid problems.
You don't necessarily have to update the whole ROM to have the newest modem and bootloader, there are Odin flashable packages.
I don't know if CF-Auto-Root works with 4.2. I know it works for 4.4 and above.
As long as you do your wipes (this means system, data, cache, dalvik) you can flash anything over anything.
Yes, you can do nandroid backups, but TWRP and CWM backups are not compatible with each other. Also, TWRP has a problem with TouchWiz backups, meaning you can make and restore a TouchWiz backup, but it either won't boot or will give you lots of errors.
Click to expand...
Click to collapse
Ok, so is there a way that I could at least get to lollipop w/o getting KNOX and have a nandroid that would work or should I just OTA all the way up to current and then root and flash?
Oniyuri said:
Ok, so is there a way that I could at least get to lollipop w/o getting KNOX and have a nandroid that would work or should I just OTA all the way up to current and then root and flash?
Click to expand...
Click to collapse
Why are you so obsessed with Knox? I just told you that it won't be an issue on custom ROMs. There is no knox on custom ROMs. Knox is a Samsung thing. So, unless you plan on staying stock, there is no reason to be concerned about it. Even if you stay stock, there still is no reason to be afraid of it, it's just some security crap, and it won't affect you in any way. Why are you so afraid of it?
My device came with Knox pre-installed and it didn't do jack.
Just update if you want to update or flash a recovery (flashing custom ROMs doesn't require root, just a custom recovery) and flash your desired ROM.
GDReaper said:
Why are you so obsessed with Knox? I just told you that it won't be an issue on custom ROMs. There is no knox on custom ROMs. Knox is a Samsung thing. So, unless you plan on staying stock, there is no reason to be concerned about it. Even if you stay stock, there still is no reason to be afraid of it, it's just some security crap, and it won't affect you in any way. Why are you so afraid of it?
My device came with Knox pre-installed and it didn't do jack.
Just update if you want to update or flash a recovery (flashing custom ROMs doesn't require root, just a custom recovery) and flash your desired ROM.
Click to expand...
Click to collapse
Well, I've been out of the loop for a while (the last time I was active was circa late 2013/ early 2014), but I do remember there was a lot of concern regarding warranty and the flags. I do admit that there was a lot of speculation from losing a section of memory from tripping the flag to actually burning the motherboard. I originally decided to wait until the dust settled but life took over and I ended up only sporadically checking the forums before disappearing for long periods of time. I actually don't know what the end of the story is to be honest.
Oniyuri said:
Well, I've been out of the loop for a while (the last time I was active was circa late 2013/ early 2014), but I do remember there was a lot of concern regarding warranty and the flags. I do admit that there was a lot of speculation from losing a section of memory from tripping the flag to actually burning the motherboard. I originally decided to wait until the dust settled but life took over and I ended up only sporadically checking the forums before disappearing for long periods of time. I actually don't know what the end of the story is to be honest.
Click to expand...
Click to collapse
The only concern is about the warranty. Since your phone is some years old, I doubt that is an issue for you anymore.
By losing memory you mean losing data or actually losing storage space?
Either way, I haven't heard of anyone with such a problem around here.
Nor about somebody with a fried motherboard.
There might have been some unfortunate cases, but this is to be expected when you modify your device. There always is a risk of damage, it doesn't matter if it's by rooting or by flashing a ROM.
I meant lose storage. As I understood it, KNOX worked like a container and once the flag was tripped, you'd lose whatever it contained - as in never being able to access that bit ever again.
Oniyuri said:
I meant lose storage. As I understood it, KNOX worked like a container and once the flag was tripped, you'd lose whatever it contained - as in never being able to access that bit ever again.
Click to expand...
Click to collapse
You have to use the knox app first for that to even be considered a risk.
Knox will not put anything in that container without user input.
GDReaper said:
You have to use the knox app first for that to even be considered a risk.
Knox will not put anything in that container without user input.
Click to expand...
Click to collapse
Ok, so to get the steps straight:
1. I'd need to get a lollipop bootloader & modem
2. root + nandroid (CWM) + titanium for app data (non-system app data)
3. change recovery to TWRP
4. flash rom + gapps
....and then I should be ready to go, correct?
Oniyuri said:
Ok, so to get the steps straight:
1. I'd need to get a lollipop bootloader & modem
2. root + nandroid (CWM) + titanium for app data (non-system app data)
3. change recovery to TWRP
4. flash rom + gapps
....and then I should be ready to go, correct?
Click to expand...
Click to collapse
1) Is not mandatory, it's just recommended. The only exception is if your device is a Verizon or AT&T phone, then don't - and I repeat - don't update or you risk losing the possibility of any custom ROM flashing or rooting due to the locked bootloaders.
2) and 3) CWM and TWRP backups do not have cross-compatibility. If you backup with CWM you have to restore with CWM.
Please tell me you haven't flashed anything yet. I can help with the entirety of the procedure.
robcore said:
Please tell me you haven't flashed anything yet. I can help with the entirety of the procedure.
Click to expand...
Click to collapse
No I haven't done anything yet. I found something else to occupy me for the last few nights - a chromecast that seems to hate me.
Oniyuri said:
No I haven't done anything yet. I found something else to occupy me for the last few nights - a chromecast that seems to hate me.
Click to expand...
Click to collapse
Haha I hear ya. I've been building a kernel for about a year now and finally (knock on wood) arrived at something I'm happy with. Lesson learned, electronics are definitely conspiring against us.
That said, please feel free to pm me when you're ready for the flashing process. Though it's a silly skill, it's become second nature to me and something about your situation flipped a helpful switch in me : P what's the Chromecast like?
robcore said:
Haha I hear ya. I've been building a kernel for about a year now and finally (knock on wood) arrived at something I'm happy with. Lesson learned, electronics are definitely conspiring against us.
That said, please feel free to pm me when you're ready for the flashing process. Though it's a silly skill, it's become second nature to me and something about your situation flipped a helpful switch in me : P what's the Chromecast like?
Click to expand...
Click to collapse
Well, so far, the chromecast is only plugged into my tv and basically did the setup by itself only for the google cast app on my phone to not recognize it when it said that it's ready to cast. I've ran out of things to do aside from going to the google forums (which I've already done). I'm starting to wonder if it's my phone that's causing all the issues.
Here's my Cheat Sheet ! This is the same procedure I used a while back with N910VVRU2CPD1 . I just updated the thread to work with the newer package.
1. Odin SamMobile N910VVRU2BPA1
reboot and factory reset a few times if needed to remove custom icon
2. Odin hsbadr's N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar HERE
3. Unlock with the samsung_unlock_n4-fix PROCESS use SIM card for data. Wi-Fi will not work at this point.
4. Odin twrp-3.0.2-0-trltevzw.tar Uncheck Auto Reboot, Manually boot into TWRP
5. Odin hsbadr's N910VVRU2CPD1_StockRestore.tar HERE
6. TWRP BETA-SuperSU-v2.71-20160331103524, Factory Reset, boot system
7. Use FlashFire to Flash firmware package SamMobile N910VVRU2CQI2
( ! System and Cache only ! )
Your mileage may vary.
Before I install my personal apps I remove as much Verizon, Samsung and Google spyware as possible.
-------------------------------------------------------------------------------------------------
EDIT: I was able to skip the recommended rooting and unlocking of 5.1.1 and make the jump I described.
I did not do the unlock using Kingroot until step 3 and I did not permanent root with Super Su until step 6.
No matter how you get there the phone has to be on [Firmware] [MM] [6.0.1] [RetEd/DevEd] Safe Upgrade to Marshmallow [N910VVRU2CPD1] then you can use FlashFire.
Hyperlinks are in the text to most of what's needed.
Credit AstonsAndroid I found it HERE
I keep seeing people saying there is a way to just flash TWRP and Magisk and you're done. I'd like to avoid SuperSU and the other root methods if possible. How would that work with your updated guide? Thanks
My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839
RootMyNote4Please said:
My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839
Click to expand...
Click to collapse
I'm not sure if it was spyware or what. but my phone performance better after cleaning out that folder.
Thanks doc. Is that a folder that gets overwritten when you flash a new room?
This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?
lodilovesmuffins said:
This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?
Click to expand...
Click to collapse
Kingroot needs to connected to root. I never seen it work without a connection. N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar brakes wifi but you get it back with N910VVRU2CPD1_StockRestore.tar, I dont know why. It just works
RootMyNote4Please said:
Thanks doc. Is that a folder that gets overwritten when you flash a new room?
Click to expand...
Click to collapse
My best guess now is it's some kind of provisioning issue that is cleaned up. Some of the files deleted you may actually need some day.
does this require the developer version? btw how do i backup
I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.
RootMyNote4Please said:
I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.
Click to expand...
Click to collapse
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.
kevintm78 said:
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.
Click to expand...
Click to collapse
That's weird. I flashed SuperSU but it didn't show up in the apps and when I tried to use Flashfire it said I didn't have root.
Got there. SuperSU had an error message when I tried to install it the 1st time after flashing full system. So I rebooted and installed again. Now Flashfire crashes and won't open. Switched to Flashify and it seems to work ok.
Edit - Stuck here for now. Flashify can't seem to find the CQI2 file and I still haven't been able to get Flashfire to work. Tried an older version and still crashes when it checks to see if I have the pro version or not.
In case someone else has the same problem with Flashfire, it's because the program expired April 1st, 2018. Turn the date back on your phone and it will load.
Finally completed it!!!
Ok, so the things I learned from my trials and errors.
1) DON'T flash the kernal and SU after you root with the N4 fix. I did this the 1st 15 times and could never get Flashfire to work later on. So skip all of the stuff in that post after you flash TWRP. Then flash the next firmware step.
2) Uncheck auto time and date on your phone and roll it back to before 4/1/18 to get Flashfire to work.
I'm sure there are some more things and I'll add whatever else I think can help the next guy along. Good luck! And thanks for the guide doc!
Note: Did the phone icon on your lock screen disappear as well when you were done? The camera is there on the bottom right like normal, but the phone is gone on the bottom left and it displays the charging info there now.
Thanks for this - it was helpful to make clear that in my mind that despite what other guides say, there is no need to unlock a Lollipop bootloader with a Lollipop kernel + ROM first, and that we can boot a Lollipop kernel + ROM with a Marshmallow bootchain and unlock the Marshmallow bootloader from the get-go.
I tracked down the CQI2 full Odin and I made hybrid Odins that get you "rooted on N910VVRU2CQI2" in fewer steps, following hsbadr's file naming scheme:
N910VVRU2BPA1_N910VVRU2CQI2_FullFirmware.tar.md5: MM CQI2 bootchain/firmware/modem, LL BPA1 ROM/kernel/recovery
N910VVRU2CQI2_StockRestore.tar: MM CQI2 ROM/kernel (no recovery - TWRP isn't overwritten)
These should be fine as drop-in replacements for the files mentioned in steps 2 and 5 of your guide.
Using these obviously means that you are unlocking the CQI2 aboot instead of the CPD1 aboot in step 3 while temprooted, and - importantly - step 7 is unnecessary to get to a CQI2 ROM, which is good because Flashfire is now expired :3
I doubt there's much of a real benefit to being on the newer aboot, but hey, why not.
Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?
lodilovesmuffins said:
Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?
Click to expand...
Click to collapse
No, this will work with both versions of the verizon note 4.
kevintm78 said:
No, this will work with both versions of the verizon note 4.
Click to expand...
Click to collapse
Ok, thank you very much. I'll try and root my phone with this tutorial now.
Please help!!!!
I followed this link because its supposed to be a way to downgrade from 6.1.0 to 5.1.1 so I can unlock boot loader. However, these instructions make no sense to me. Can someone PLEASE help me. I've been searching and searching for a way to root my note 4 (N910VVRS2CQA1) and can't seem to find a way. I've never done this before so I'm pretty clueless. When I read these instructions, I just don't understand what I'm supposed to be doing. A lot of this tech lingo means nothing to me unfortunately. I'm starting to thing I should just give up the idea of rooting this Note 4 that's getting slower and slower and just get a new one. I don't really want to though bc I love the fact that you can replace the battery. It'd be much easier to just root and upgrade.....well, easier if I actually knew how.