Database Users

boot animation not working

Hey all,
I'm sorry if this is a rehash of somebody else's problem, but I did some searching and couldn't find anything that seemed applicable to my situation.
Running Nexus S with cyanogenmod 7.1.0.1, downloaded from http://download.cyanogenmod.com/?type=stable&device=crespo
I am also running the latest ClockworkMod Recovery, having just updated it today. I updated via the internal update function on ROM manager.
Everything is working find, except that no matter what I do, boot animations don't run, and I get a black screen instead. The only time I didn't have a black screen was the first bootup after installing cyanogenmod update from sdcard via clockwork. This showed the default bootanimation. I then attempted to install the Speedo II animation from here:
http://forum.xda-developers.com/showthread.php?t=1053250
Immediately after, I only got a black screen on bootup. I tried flashing the bluehallway animation (also from same gallery). I then tried using SDK to push both animations to the phone at /system/media. Neither worked. I also tried to use ES file manager to swap out the bootanimation files in /system/media/ manually. Neither worked.
I then re installed CyanogenMod and repeated the steps listed above. Same result.
As far as I can tell, I have been undergoing the same procedure as when I changed my bootanimation to red rage (don't remember where I got it) On a previous version of CyanogenMod.
I have no idea what the problem is. Please help!

Sounds like it wasn't compressed properly
choose STORE in compress method when zipping back your animation sounds like they chose normal compression and this causes the desc and bootanimation not to work and all you get is blakcscreen
anyways try flashing mine
http://forum.xda-developers.com/showthread.php?t=1471708

Welp, that works perfectly. Thanks a ton! So could you explain the whole compression thing you talked about?

when you compress the boot animation back up it will be on normal compression by default you don't want this. You have to select store
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

if you're installing them in /system/media/ make sure to not have any bootanimation.zip in /data/local/ because that's where the system look up first

[bootanimation]tweaked ics

Stock is too bright and shows too much color banding
Adjusted the gamma on the images. Made darker and colors little more vibrant
Install:
Flash threw CWR
Alternate install methods [root required]
Use the bootanimation.zip below
Place in data/local folder then reboot
no need to set permissions leave as is
this will bypass default animation and when you want to revert back simply delete from local folder and will default back to stock
one thank to me for resize
a lot of thanks to demo23019 for this great work(for the nexus s device)
Link:http://www.mediafire.com/?6a4jqlf8anhag2a
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for that. I have been waiting for this.

thanks and thanks again.

I felt the same way. Thank you very much, its perfect.

Yes its good and its work thanks

For those of you on MIUI like me, I'll provide the steps to install it.
1. Download the boot-file.zip containing the "bootanimation" file.
2. Extract the file and place it in system/bin, replacing the old boot animation file (make sure there is no extension at the end, just bootanimation)
3. Give it the permissions using Root Explorer or equivalent: rwx-rx-rx (rwxrxrx)
4. Download ics_tweaked.mtz and place it in sdcard/MIUI/themes
5. Reboot, and them go Settings>Themes>Customize>Boot Animation> The new animation should be there.
6. Select it, Reboot, and Enjoy!
NOTE. If it isn't there, look at all the boot animations that are there, if there is one with no preview, select that one. That should be one containing the new animation.
*DISCLAIMER* This method worked for me and results may vary.

Works flawlessly, thanks.

Great boot animation and very easy to install.
Sent from my Huawei u8800 using XDA

Will this work on the Rezound I would really like this one looks nice.

When start booting animation little bit laging, but later everything ok. Best boot animation for me.

Thanks for this great animation, works like a charm

[RECOVERY][KITKAT]TWRP 2.8.1 for spice mi509

TWRP 2.8.1
RIGHT SIDE UP
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROMS have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledges about phones and phones utilities too.
Make sure that whatever you do, you are doing it at your own responsibility.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Download the recovery in phone or move it to phone.
2. Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
3. Open flashify and follow the screenshots.
4. Reboot to recovery.
TWRP Link

prasad143 said:
TWRP 2.8.1
RIGHT SIDE UP
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROMS have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledges about phones and phones utilities too.
Make sure that whatever you do, you are doing it at your own responsibility.
Screenshots:
View attachment 3208374
1. Download the recovery in phone or move it to phone.
2. Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
3. Open flashify and follow the screenshots.
View attachment 3208378
View attachment 3208379
View attachment 3208380
View attachment 3208381
View attachment 3208383
4. Reboot to recovery.
TWRP Link
Click to expand...
Click to collapse
The recovery is working bro....
but it is upside down...why???

File deleted by you
When clicking on twrp says file is in bin. Please move file from bin to somewhere.

[TOOL][JASMINE] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the Xiaomi Mi A2's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

Thanks ! I used this tool in my zuk z2 pro and is fantastic

Is it possible to used it for enabling cam2api?

GK_NL said:
Is it possible to used it for enabling cam2api?
Click to expand...
Click to collapse
Unfortunately no

help
when i try to flash a recovery (booting a recovery) the name of files change to strange things like "1ZHqTVOIAgWdUqtIh5WLxD" or "c0kpXH7r0OESNfLgZQCsOZboc0TkvtiKKwOeEAVAp3H", not letting me flash anything.

Kaito Akimoto said:
when i try to flash a recovery (booting a recovery) the name of files change to strange things like "1ZHqTVOIAgWdUqtIh5WLxD" or "c0kpXH7r0OESNfLgZQCsOZboc0TkvtiKKwOeEAVAp3H", not letting me flash anything.
Click to expand...
Click to collapse
It's because actually decryption is not working in the twrp

Please help me for apgrade or root 8227L_demo

Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me

any help?

Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse

Can I switch to a different luacher or operating system?