Please help!
I flashed back to stock for Oct Update full wipe and I lose touch on the screen. It does not respond to any touch. How can I fix this?
Update: as elinca247 points out, critical partition also needs to be unlocked.
ahalol said:
Please help!
I flashed back to stock for Oct Update full wipe and I lose touch on the screen. It does not respond to any touch. How can I fix this?
Click to expand...
Click to collapse
Did you figure this out?
Get the boot image file from the root guide thread and flash that in fastboot. Either the flash all didn't flash the boot image or it flashed the wrong one.
Fastboot command
Toyeboy said:
Did you figure this out?
Click to expand...
Click to collapse
ahalol said:
Please help!
I flashed back to stock for Oct Update full wipe and I lose touch on the screen. It does not respond to any touch. How can I fix this?
Click to expand...
Click to collapse
I had the same problem and apparently the critical partition needs to be unlock prior to flashing.
"fastboot flashing unlock_critical"
hope that works for you.
elinca247 said:
I had the same problem and apparently the critical partition needs to be unlock prior to flashing.
"fastboot flashing unlock_critical"
hope that works for you.
Click to expand...
Click to collapse
I totally agree. After doing that, I was able to recover but sacrificed all my data.
Could this be why my screen isn't working if I lock my screen? I have to keep my screen timeout off and keep my phone unlocked to use it. If I lock the screen, the touch screen doesn't work. Voice commands and the buttons work fine, music continues playing, just the touch screen is inoperable.
Been going on since the Sept update I have tried factory reset and reflashing the software from Essential
bullfrog527 said:
Could this be why my screen isn't working if I lock my screen? I have to keep my screen timeout off and keep my phone unlocked to use it. If I lock the screen, the touch screen doesn't work. Voice commands and the buttons work fine, music continues playing, just the touch screen is inoperable.
Been going on since the Sept update I have tried factory reset and reflashing the software from Essential
Click to expand...
Click to collapse
you can try to unlock the "critical partition" (will wipe data) and reflash Oct back-to-stock. If it doesn't work, you can always flash Aug back-to-stock and OTA up to OCT and then root.
Same issue I had after manually flashing the update. I solved it by adb sideloading the OTA file.
I went back to the original nougat and still the same issue
bullfrog527 said:
I went back to the original nougat and still the same issue
Click to expand...
Click to collapse
Try what I did. I downloaded the latest and had no touch so I noted into the stick recover and selected the ADB sideload, downloaded the OTA on my computer and stuck it in where I keep my ADB tools, entered the cmd's as per the Essential instruction on the software page where you get the OTA. I have touch again, everything seems fine.
Thanks! I'll try that
bullfrog527 said:
Thanks! I'll try that
Click to expand...
Click to collapse
Lmk if it helps.
Link to what?
bullfrog527 said:
Link to what?
Click to expand...
Click to collapse
Lmk = let me know
Duh, sorry. Was driving and didn't see the full message.
For sure, don't know when I'll get to it but I'll definitely reply here
Any luck?
Nickdroid86 said:
Any luck?
Click to expand...
Click to collapse
Going to try today. Finally got a chance to get to my laptop without the kid around
---------- Post added at 04:55 PM ---------- Previous post was at 04:32 PM ----------
Didn't work.....
Related
I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Edit:
Stuck on a bootloop, the LG logo flashes for a second, then its a lighted black screen. I plug my phone inot the pc, and 20 windows popup asking If I want to format G drive.
No twrp installed.
Dreamincolr said:
I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Click to expand...
Click to collapse
do you have custom recovery?(if you have twrp than this will help http://forum.xda-developers.com/showthread.php?t=2451696) do you know how to enter download mode, can you access it, how about you flash to stock?(if you can get into download mode than this will help http://forum.xda-developers.com/showthread.php?t=2432476)
Dreamincolr said:
I have the Lg g2 D800 varient, and tonight I got an update for 15.4mb, that pushed without my permission, and now my screen is on a black screen, upon rebooting after said update was installed. I am rooted, but no plans to update to 4.4, it just did it without consent..
Help?
Click to expand...
Click to collapse
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
XxZombiePikachu said:
do you have custom recovery?(if you have twrp than this will help http://forum.xda-developers.com/showthread.php?t=2451696) do you know how to enter download mode, can you access it, how about you flash to stock?(if you can get into download mode than this will help http://forum.xda-developers.com/showthread.php?t=2432476)
Click to expand...
Click to collapse
No custom recovery, or twrp. I tried to install those last week, but I was unsucessful, and stuck with root for now. No download mode at the moment, I tried to enter it, and my phones lg logo flashed for a second before going to the black screen.
podagee said:
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
Click to expand...
Click to collapse
actually he does not want kitkat apparently
---------- Post added at 11:38 PM ---------- Previous post was at 11:33 PM ----------
Dreamincolr said:
No custom recovery, or twrp. I tried to install those last week, but I was unsucessful, and stuck with root for now. No download mode at the moment, I tried to enter it, and my phones lg logo flashed for a second before going to the black screen.
Click to expand...
Click to collapse
you can try this but you need Ubuntu and I'm not exactly sure it will work(also you need to find the correct files for your model), also if your phone is under warranty you can try taking it to att store and telling them update killed your phone but of course don't mention anything about root
sorry forgot to put actual link http://forum.xda-developers.com/showthread.php?t=2582142
podagee said:
downgrade back to 10d using flashtool,
root,install twrp,reflash twrp 2.6.3.3
then follow this method.
http://forum.xda-developers.com/showthread.php?t=2665391
Click to expand...
Click to collapse
XxZombiePikachu said:
actually he does not want kitkat apparently
Click to expand...
Click to collapse
Only because Im ignorant in learning how to flash, I came from iOS, and I'm still learning. I just want my phone back on at this point. I only rooted, and a silly update from att downloaded while I was rooted, and It auto rebooted into an LG logo flash, followed by a black screen.
Dreamincolr said:
Only because Im ignorant in learning how to flash, I came from iOS, and I'm still learning. I just want my phone back on at this point. I only rooted, and a silly update from att downloaded while I was rooted, and It auto rebooted into an LG logo flash, followed by a black screen.
Click to expand...
Click to collapse
yes I was just saying you did not want kit kat because he posted a link on how to get kk which is also outdated since now there is a method where get root and recovery
also incase you did not notice I had forgotten to put the link back there which is here http://forum.xda-developers.com/showthread.php?t=2582142
XxZombiePikachu said:
yes I was just saying you did not want kit kat because he posted a link on how to get kk which is also outdated since now there is a method where get root and recovery
also incase you did not notice I had forgotten to put the link back there which is here http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Ah, yeah, I cant even get into the factory hard reset. It just turns off and on to a black screen. Thank you for your help, though.
Im freaking out, -_-. I regret for even allowing it to update, I should have tried to turn the phone off.
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
podagee said:
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
Click to expand...
Click to collapse
he can't access download mode, if you would read you would know
XxZombiePikachu said:
he can't access download mode, if you would read you would know
Click to expand...
Click to collapse
Well i had that happeb a few times.... i just left it at the black screen and about 30 minutes it rebooted.
I could still access download mode when that happened to me.
podagee said:
Well if the guy doesnt want kitkat downgrade to 10d. That woul be the best option
Click to expand...
Click to collapse
How do I even do this? my pc isnt even recognizing the phone.
podagee said:
Well i had that happeb a few times.... i just left it at the black screen and about 30 minutes it rebooted.
I could still access download mode when that happened to me.
Click to expand...
Click to collapse
I mean, the phone is on, the back light is on, its just..black. I plugged my phone in, and Im not sure why, but 20 windows pop up asking if I want to format the drive.
Dreamincolr said:
I mean, the phone is on, the back light is on, its just..black. I plugged my phone in, and Im not sure why, but 20 windows pop up asking if I want to format the drive.
Click to expand...
Click to collapse
dont format it.
okay now you have to be quick when you do this to get into download mode...
plug your usb into your phone and have it hanging in the usb port in the computer or plug.
now hold the power button until it turns off.
quickly plug in the port/plug and hold the up button.
you have to do it really quickly. took me a few tries.
once in download mode restore to factory whichever image you choose.
ive had this done a couple times to my phone and it does work if you act quickly.
Have you tried this? http://forum.xda-developers.com/showthread.php?t=2582142
If you can access download mode by holding. UP volume while plugging in USB, you can flash the correct. kdz file to return to stock http://forum.xda-developers.com/showthread.php?t=2432476
missiveusa said:
Have you tried this? http://forum.xda-developers.com/showthread.php?t=2582142
If you can access download mode by holding. UP volume while plugging in USB, you can flash the correct. kdz file to return to stock http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
First link should work for you. I'm on D802, but had exactly the same problem and this solved it completly.
But be careful while doing it, it's really easy to mess things up.
Schindler069 said:
First link should work for you. I'm on D802, but had exactly the same problem and this solved it completly.
But be careful while doing it, it's really easy to mess things up.
Click to expand...
Click to collapse
Makes me wish I owned linux. Ill continue to look, but thanks
Dreamincolr said:
Makes me wish I owned linux. Ill continue to look, but thanks
Click to expand...
Click to collapse
Just get a virtual machine, it does the job just fine.
I did it with VirtualBox and Ubuntu. And make sure, you disable auto mount usb in ubuntu to prevent opening the 20 "partition" windows.
I have rooted my phone twice so far, the first time using kingo root pc and the second time using kingo root apk. After the first root, i manually rebooted my phone and it got stuck on the white tmobile screen. It would make the notification vibration or the vibration that it normally makes when booting up. But after the vibration it would not start up. Approximately 15 seconds would go by and it would vibrate again. This happened repeatedly and did not end. I then fixed it after fiddling with it for a few hours and coming up with something i didn't find on the internet and tried a second time with the kingo apk. After root i then installed supersu and after the install (binary or whatever it is, i chose normal not cfw) it prompted me to reboot and i chose the reboot now option. The same problem happened again and i fixed it again already knowing what to do. Someone please help me fix this problem so that it doesn't happen again.
how?
How did you fix it? I have the same exact problem - used kingo root, then installed supersu, rebooted, and now it's stuck on the TMobile screen
ho do u fix it
angs03 said:
How did you fix it? I have the same exact problem - used kingo root, then installed supersu, rebooted, and now it's stuck on the TMobile screen
Click to expand...
Click to collapse
how do u fix it
Did you unlock the bootloader??
how did you fix it please help
jacobk420 said:
how do u fix it
Click to expand...
Click to collapse
Xdev_Jayy said:
Did you unlock the bootloader??
Click to expand...
Click to collapse
fixmyphoneplease said:
how did you fix it please help
Click to expand...
Click to collapse
angs03 said:
How did you fix it? I have the same exact problem - used kingo root, then installed supersu, rebooted, and now it's stuck on the TMobile screen
Click to expand...
Click to collapse
Basically, (and i did this more than once so it DOES work... or at least for me) i installed samsung kies, kies 3, and smart switch since i was desperately in needed of a fix. i used smart switch to get it back to normal by putting the phone in download mode then restoring it. other people have success with kies but i did not, just experiment with the different applications and you should be able to restore your phone. BUT, this will I repeat THIS WILL reset all the data on your ENTIRE phone! so please be sure to take note of anything that is not backed up as it will be ENTIRELY LOST. I hope you can at least get your phone working again
SN: I am NOT responsible for any damage done to your phone
---------- Post added at 06:59 AM ---------- Previous post was at 06:55 AM ----------
Xdev_Jayy said:
Did you unlock the bootloader??
Click to expand...
Click to collapse
i dont even know what that means
So I updated to G900VVRU2DPF4 and my phone was working fine until when I rebooted one of these times. Now I am getting 'Unfortunatly Sytem UI has stopped.' so I hit ok then the sreen goes blank with my homescreen wallpaper (and starts blinking from black to the wallpaper Except when I hit the lock button then It locks) and I can't do a thing. I recently turned off ADB on the phone so I can't do nothing there and I tried clear cache that did not work. I read that I need to erase the data on the system ui under setting, apps... but I can't even get into setting. I DO NOT WANT TO FACTORY RESET THE PHONE and erase all my files. There must be a way to fix it. I tried remote controlling via wifi (like with google's device manger and Samsung findmyphone) but now the phone won't connect to wifi for some reason it won't turn on. I am trying to sideload Samsung Good Lock because that might fix it also but I can't. I need help big time. When I connect it the the computer it kinda read it but I can't get files off the phone but it shows up and Unassuming Kies/Smart Switch does not work either. There must be a fix without loosing data. Help Please? :'-(
P.S. I tried adb sideload the PF4 updated in recovery and that did not fix it.
jakeh9777 said:
So I updated to G900VVRU2DPF4 and my phone was working fine until when I rebooted one of these times. Now I am getting 'Unfortunatly Sytem UI has stopped.' so I hit ok then the sreen goes blank with my homescreen wallpaper (and starts blinking from black to the wallpaper Except when I hit the lock button then It locks) and I can't do a thing. I recently turned off ADB on the phone so I can't do nothing there and I tried clear cache that did not work. I read that I need to erase the data on the system ui under setting, apps... but I can't even get into setting. I DO NOT WANT TO FACTORY RESET THE PHONE and erase all my files. There must be a way to fix it. I tried remote controlling via wifi (like with google's device manger and Samsung findmyphone) but now the phone won't connect to wifi for some reason it won't turn on. I am trying to sideload Samsung Good Lock because that might fix it also but I can't. I need help big time. When I connect it the the computer it kinda read it but I can't get files off the phone but it shows up and Unassuming Kies/Smart Switch does not work either. There must be a fix without loosing data. Help Please? :'-(
P.S. I tried adb sideload the PF4 updated in recovery and that did not fix it.
Click to expand...
Click to collapse
What is your setup? Are you rooted?
Nandr0idC0nsumer said:
What is your setup? Are you rooted?
Click to expand...
Click to collapse
No I am not. Fully stocked. I had good lock installed before but I turned on finger unlock and good lock did not support finger unlock so it uninstalled.
I am kinda waiting also on sammobile to post the latest firmware. Since I heard you can update &/or reinstall the firmware without loading files like apps and stuff. (excpet if you are not on official stock) But I still would like some help.
jakeh9777 said:
No I am not. Fully stocked. I had good lock installed before but I turned on finger unlock and good lock did not support finger unlock so it uninstalled.
I am kinda waiting also on sammobile to post the latest firmware. Since I heard you can update &/or reinstall the firmware without loading files like apps and stuff. (excpet if you are not on official stock) But I still would like some help.
Click to expand...
Click to collapse
Try downgrading to PD1 via Odin? Maybe that will allow you to recover your data...
Nandr0idC0nsumer said:
Try downgrading to PD1 via Odin? Maybe that will allow you to recover your data...
Click to expand...
Click to collapse
Even though it's an update before? Or should I wait for PF4. But I do in w they both are 6.0.1 and also I do have it downloaded but I used Sam Firm tool (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) or should I get the one from Sammobile?
jakeh9777 said:
Even though it's an update before? Or should I wait for PF4. But I do in w they both are 6.0.1 and also I do have it downloaded but I used Sam Firm tool (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) or should I get the one from Sammobile?
Click to expand...
Click to collapse
Get PD1 from SamMobile, and flash it thru Odin. I'm hoping this won't make anything worse but it should let us recover your data (that's the hope)
Nandr0idC0nsumer said:
Get PD1 from SamMobile, and flash it thru Odin. I'm hoping this won't make anything worse but it should let us recover your data (that's the hope)
Click to expand...
Click to collapse
Ok! Yeah my friend had a brick issue like a soft brick. And he was on stock also so he downloaded his firmware and installed it... It did not wipe his. I hope it doesn't wipe mine. My only problem is that I have fast internet but since I don't have a premium account on sammobile it will take 2 hours that why I was asking about SamFirm tool.
jakeh9777 said:
Ok! Yeah my friend had a brick issue like a soft brick. And he was on stock also so he downloaded his firmware and installed it... It did not wipe his. I hope it doesn't wipe mine. My only problem is that I have fast internet but since I don't have a premium account on sammobile it will take 2 hours that why I was asking about SamFirm tool.
Click to expand...
Click to collapse
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Nandr0idC0nsumer said:
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Click to expand...
Click to collapse
I have PD1 I was trying to get PF4 with SamFirm but it downloaded PD1 so I was confused. That's all. I know about that was rooted while back once before but I messed things up so I unrooted.
So can use that one?
Nandr0idC0nsumer said:
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Click to expand...
Click to collapse
Thanks for the help... it's Fixed!
jakeh9777 said:
Thanks for the help... it's Fixed!
Click to expand...
Click to collapse
Great!
I have a possible root solution for the T818V/T818A aka the Verizon and ATT version of the T819 if any one is interested in giving it a go?
.
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Click to expand...
Click to collapse
Could you post your firmware build number?
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Here we go. This is for T818VVRU1AQB1 firmware, but probably works on any revision 1 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
https://www.androidfilehost.com/?fid=529152257862710309
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the SM-T818V_eng_boot.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Good luck I hope it works for you. Let me know your outcome.
.
ashyx said:
Could you post your firmware build number?
Click to expand...
Click to collapse
AQA3
Sent from my SM-T818V using Tapatalk
le0.br4zuc4 said:
AQA3
Click to expand...
Click to collapse
You should be fine, let me know your results.
ashyx said:
You should be fine, let me know your results.
Click to expand...
Click to collapse
Will try it out soon
Sent from my SM-T818V using Tapatalk
There's been 10 downloads yet no one has come back with any reports?
ashyx said:
There's been 10 downloads yet no one has come back with any reports?
Click to expand...
Click to collapse
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
burattino said:
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
Click to expand...
Click to collapse
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
le0.br4zuc4 said:
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
Click to expand...
Click to collapse
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
ashyx said:
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
Click to expand...
Click to collapse
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
ashyx said:
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
Click to expand...
Click to collapse
Thanks for the help buddy This didn't help either
le0.br4zuc4 said:
Thanks for the help buddy This didn't help either
Click to expand...
Click to collapse
Did the firmware load OK?
ashyx said:
Did the firmware load OK?
Click to expand...
Click to collapse
No, didn't work either. I'm going to get an insurance replacement
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
No, didn't work either. I'm going to get an insurance replacement
Click to expand...
Click to collapse
Are you saying that the full firmware didn't flash either? At what point does it fail?
Anyway don't worry I'll upload the stock AQA3 firmware later.
EDIT: I think this is all you'll need to get booting again. Flash via AP in ODIN.
If not I'll give you the link to the entire firmware.
https://www.androidfilehost.com/?fid=745425885120718683
.
i have the AQA3 as well, which files should i use first to help with this?
rootisthebest said:
i have the AQA3 as well, which files should i use first to help with this?
Click to expand...
Click to collapse
To do what, Root?
youve posted multiple files, i just wanna make sure i flash the right one(s), and can relay my results
I was just trying to install the 9.0.6 update manually following the instructions in the thread for it here on xda and it wouldn't work. I uninstalled magisk and restored images through magisk manager as the directions stated to do. I couldn't get the update to show in the local upgrade section under system update so decided to reboot to see if that would fix it but now my phone will not boot. It goes to a screen that says my device is corrupt and won't go past that. It says to hit the power button to continue but that just makes it boot back to that screen and if I just wait the phone shuts off.
Any help is appreciated.
(UPDATE) Thanks for the help guys. I got the phone booting again by flashing the 9.0.6 ROM in fastboot. I'm still getting the "device is corrupt" message and have to hit the power button twice to get it to boot so if anyone knows a fix for this I would appreciate it. At least I can use the phone now.
imucarmen said:
I was just trying to install the 9.0.6 update manually following the instructions in the thread for it here on xda and it wouldn't work. I uninstalled magisk and restored images through magisk manager as the directions stated to do. I couldn't get the update to show in the local upgrade section under system update so decided to reboot to see if that would fix it but now my phone will not boot. It goes to a screen that says my device is corrupt and won't go past that. It says to hit the power button to continue but that just makes it boot back to that screen and if I just wait the phone shuts off.
Any help is appreciated.
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6t/how-to/tool-t-mobile-oneplus-6t-msmdownloadtool-t3868916
Worked for me. Unzip to a folder....run it.....with phone off press and hold all 3 buttons......it will find device.... press start.....Yahtzee....hope this helped
imucarmen said:
I was just trying to install the 9.0.6 update manually following the instructions in the thread for it here on xda and it wouldn't work. I uninstalled magisk and restored images through magisk manager as the directions stated to do. I couldn't get the update to show in the local upgrade section under system update so decided to reboot to see if that would fix it but now my phone will not boot. It goes to a screen that says my device is corrupt and won't go past that. It says to hit the power button to continue but that just makes it boot back to that screen and if I just wait the phone shuts off.
Any help is appreciated.
Click to expand...
Click to collapse
Are you able to boot into fastboot?
mang0 said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Yes.
mang0 said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Mine wouldn't boot into anything....said hardware/software mismatch.
headcreepz said:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-t-mobile-oneplus-6t-msmdownloadtool-t3868916
Worked for me. Unzip to a folder....run it.....with phone off press and hold all 3 buttons......it will find device.... press start.....Yahtzee....hope this helped
Click to expand...
Click to collapse
That says it's for the T Mobile version only. I have the global version.
imucarmen said:
That says it's for the T Mobile version only. I have the global version.
Click to expand...
Click to collapse
Shoot...sorry
There is one on here for international.....look in guides
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
imucarmen said:
Yes.
Click to expand...
Click to collapse
You could try to use msm download tool linked above or flash the full rom again since you can get into fastboot. I'd prob try that before the msm tool though.
mang0 said:
You could try to use msm download tool linked above or flash the full rom again since you can get into fastboot. I'd prob try that before the msm tool though.
Click to expand...
Click to collapse
do you have any instructions on how to go about flashing a rom in fastboot? I've never done it before.
imucarmen said:
do you have any instructions on how to go about flashing a rom in fastboot? I've never done it before.
Click to expand...
Click to collapse
Check this link
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
imucarmen said:
do you have any instructions on how to go about flashing a rom in fastboot? I've never done it before.
Click to expand...
Click to collapse
Just download full zip of fastboot rom, extract into a folder, connect you phone in fastbbot mode and run flash all bat file.
You can find all in this thread:
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
VampireHeart said:
Just download full zip of fastboot rom, extract into a folder, connect you phone in fastbbot mode and run flash all bat file.
You can find all in this thread:
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Click to expand...
Click to collapse
Thanks. I got that part and was able to get my phone booting again but I still get the corrupt device message when I start the phone. Wish I knew how to get rid of it. IS there any return to full stock methods that also locked the bootloader and restore all partitions to stock? That is the only thing I can think of that might work.
imucarmen said:
Thanks. I got that part and was able to get my phone booting again but I still get the corrupt device message when I start the phone. Wish I knew how to get rid of it. IS there any return to full stock methods that also locked the bootloader and restore all partitions to stock? That is the only thing I can think of that might work.
Click to expand...
Click to collapse
Someone say that wiping all with stock recovery solved, but device work fine also whit that message, otherwise you can try MSM Download Tool, it will restore all stock to 9.0.5 with locked bootloader.
imucarmen said:
Thanks. I got that part and was able to get my phone booting again but I still get the corrupt device message when I start the phone. Wish I knew how to get rid of it. IS there any return to full stock methods that also locked the bootloader and restore all partitions to stock? That is the only thing I can think of that might work.
Click to expand...
Click to collapse
Use the MSMDownloadTool for the international version, it's the only way to bypass the verity trigger, it will restore the device to full stock as if you never unlocked the bootloader to begin with.
VampireHeart said:
Someone say that wiping all with stock recovery solved, but device work fine also whit that message, otherwise you can try MSM Download Tool, it will restore all stock to 9.0.5 with locked bootloader.
Click to expand...
Click to collapse
Dark Nightmare said:
Use the MSMDownloadTool for the international version, it's the only way to bypass the verity trigger, it will restore the device to full stock as if you never unlocked the bootloader to begin with.
Click to expand...
Click to collapse
Thanks guys. I will try this out in the future. For now I'm just going to ride with what I got since I don't feel like setting my phone up again. I don't reboot much so it shouldn't bother me too bad. I guess it's good I learned something new.
Dark Nightmare said:
Use the MSMDownloadTool for the international version, it's the only way to bypass the verity trigger, it will restore the device to full stock as if you never unlocked the bootloader to begin with.
Click to expand...
Click to collapse
Can you provide me a link? The only MSMDownloadTool I see says it's only for the T-Mobile version. Thanks.
imucarmen said:
Can you provide me a link? The only MSMDownloadTool I see says it's only for the T-Mobile version. Thanks.
Click to expand...
Click to collapse
Msm download tool for int : https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Just paste this in terminal and device is corrupt message will be gone
su
Reboot "dm-verity enforcing"
Hit enter
Enjoy
[email protected] said:
Just paste this in terminal and device is corrupt message will be gone
su
Reboot "dm-verity enforcing"
Hit enter
Enjoy
Click to expand...
Click to collapse
Yep this should do the trick. It worked for me!
[email protected] said:
Just paste this in terminal and device is corrupt message will be gone
su
Reboot "dm-verity enforcing"
Hit enter
Enjoy
Click to expand...
Click to collapse
I keep getting this error and I typing it wrong?