I am able to connect via Wifi and getting IP address but the default gateway is sometime set and sometime not. When it is not set i can not surf the internet. Is there a way to set the default gateway in HEMRES ?
Someone , please help
All I need to know is how to set the deafult gateway to 192.168.0.1 same as DHCP Server.
DHCP should give it all the settings
might be worth looking to why your DHCP server isnt giving out the correct settings, but any way
Settings > Connections > Network cards > Network Adapters
you will have a list of the Adapters
at a guess it would be the IEE 802.11b/g Compatable wifi
tap on that
and it should give you some options tick Use Specific IP Address, put in the details
please note this will set the details for all wireless connections, so if only use wireless at home, then it will be no problem, but say you use it at home, at work and out and about at Hotspots, you may need to go in and change it back to using DHCP for it to work
DHCP server settings
might be worth looking to why your DHCP server isnt giving out the correct settings,
Click to expand...
Click to collapse
can you give some hints how to do that ?
I did what you said , in VxIPConfig it said DHCP Disabled, and got the deafult gateway as 192.168.0.1 . I couldn't surf the internet.
Please that from time to time I am able to surf the internet when everything is set to auto. When it happens I get the deafult gateway set (and not blank) and the DHCP is enbale
dotan_shai said:
I did what you said , in VxIPConfig it said DHCP Disabled, and got the deafult gateway as 192.168.0.1 . I couldn't surf the internet.
the DHCP is enbale
Click to expand...
Click to collapse
did you give it an ip addresss and subnet mask ?
eg for ip
192.168.0.10
subnet
255.255.255.0
is your DHCP server on a router or is it like a PC with WiFi running Internet connection sharing
I did what you say , this is what VxIPConfig said:
adapter address : 00-09-2d-b4-91-43
IP address : 169.254.210.158 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
still can not surf the internet , what is wrong.
dotan_shai said:
I did what you say , this is what VxIPConfig said:
adapter address : 00-09-2d-b4-91-43
IP address : 169.254.210.158 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
still can not surf the internet , what is wrong.
Click to expand...
Click to collapse
where did you get 169.254.210.158 from?
try 192.168.0.100
as i dont think you will have anything on that ip
with a 192.168.0.1 gateway and subnet mask of 255.255.255.0
your ip needs to be within 192.168.0.* range ( * = 1 to 255)
yeah a class c ip range is what one should use in ones internal lan
192.168.0.0 – 192.168.255.255
http://en.wikipedia.org/wiki/Private_network
Dear frinds,
Thanks a lot for your help , but still no change. This is what i got from VxIPConfig :
adapter address : 00-09-2d-b4-91-43
IP address : 192.168.0.100 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
The previous IP adress was the one that was set automatically before i changed it manulaly.
Still no surfing the internet. you said before :
might be worth looking to why your DHCP server
Click to expand...
Click to collapse
I'm not using a router it is
PC with WiFi running Internet connection sharing
Click to expand...
Click to collapse
the USB to Wifi adapter is configured as Ad-Hock.
dotan_shai said:
Dear frinds,
Thanks a lot for your help , but still no change. This is what i got from VxIPConfig :
adapter address : 00-09-2d-b4-91-43
IP address : 192.168.0.100 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
The previous IP adress was the one that was set automatically before i changed it manulaly.
Still no surfing the internet. you said before :
I'm not using a router it isthe USB to Wifi adapter is configured as Ad-Hock.
Click to expand...
Click to collapse
I see now, the ip 169.254.210.158 would be when the ppc couldn't get an IP from the DHCP Server
just a thought
Have you input in some dns servers, should be on the next tab
these dns servers will do
dns 1: 4.2.2.1
dns 2: 4.2.2.2
how did you setup internet connection sharing on you pc ?
via network setup wizard ?
Network connections > Pick your internet connection > right click then properties > then click on the Advanced tab > then make sure the Allow other computers on the network to use this connection, tick box is checked
I added the DNS adresses settings in the PPC , still can not surf the internet.
how did you setup internet connection sharing on you pc ?
via network setup wizard ?
Click to expand...
Click to collapse
That's the way i set my internet connection sharing.
Network connections > Pick your internet connection > right click then properties > then click on the Advanced tab > then make sure the Allow other computers on the network to use this connection, tick box is checked
Click to expand...
Click to collapse
It is checked !! I remove the check in Allow other users to control or disable the shared Internet connection.
I've noticed that in success connection that allowing me to surf, the beacon icon in PPC is changing for 2 seconds to beacon without the circles and than return to its previous picture beacon with two circles. In a failed connection I always see the beacon with the two circles icon that never change.
Still no surfing is available. Any more ideas ?
SOLVED !!!
Thanks for the helpers. My problem is now solved. I've just read in D-Link site regarding configuring Static IP in here
After performing the recommended settings, everything is working always.
THIS THREAD CAN BE CLOSED
Glad its working
so did you need to setup a static ip for your pc, or did you use the guide and put the details in to your ppc ?
The static IP was set in the PC according to D-Link instructions . Hope this tread helped someone .
Here is the link to D-link , static IP settings :
http://support.dlink.com/faq/view.asp?prod_id=2594&question=DWL-G122
Is there any ability to set custom IP address & DNS
Yes..
Settings->Wireless & Networks->WLAN-Settings
Long-press on your network, select modify network.
In the popup set "IP settings" to "static"
L2TP VPN connects fine from Galaxy Tab 10.1 with built-in Settings>Wireless & networks>VPN Settings. I can RDP by IP and hit my router's config page in the browser by IP, however no DNS resolution is occurring. using adb, "getprop net.dns1" reports 192.168.1.1 which is correct (my router's ip) but no domain names are loading in browser. Same VPN connection on iPhone works across the board and resolves names. What's the deal with DNS and Android's VPN implementation? The only difference in settings is the iPhone's "Send All Traffic" checkbox.
Here is a simple guide to share you PC or Laptop internet connection with your phone through wifi.
Download and install connectify on your PC or Laptop. Do a google search, you'll find Connectify-Lite for free.
Fill in the settings panel with your prefered WiFi name, password and internet connection to share.
Click start button to start sharing
On your Wireless Connection Status, click Details to get the network connection information, note the IPV4 Address
Now on your Android Device
Go to Settings -> Wireless & networks -> Wi-Fi Settings
Open Advance settings menu
Tick the Use static IP option
Enter your desired IP address (ex: 123.456.7.8) into Ip Address field
Enter your IPV4 Address (ex. 192.168.178.1) into Gateway field
Enter 255.255.255.0 into Netmask field
Enter your internet connection’s DNS server (use ipconfig /all command to get DNS info) into DNS 1 and DNS 2. As an alternative, you can use Google Public DNS: 8.8.8.8 and 8.8.4.4
Connect to Wi-Fi using your password
Disable and Enable Wi-Fi (in case if it won’t connect)
It will start working on your android device.
The reason that you need to do all this is you don't have DHCP server enabled on your windows machine for connectify.
An alternative way is to use "Internet Pass through" USB connection mode. In this case windows will automatically enable a DHCP server.
I have attached the screenshots with the post.
Please ask if you have any further query.
Hit the thanks button if you find my post useful.
I dont understand, what does this accomplish? If you have wifi just connect to it.
Mog said:
I dont understand, what does this accomplish? If you have wifi just connect to it.
Click to expand...
Click to collapse
It helps you share your PC internet connection with your phone through wlan if you don't have a wifi connection and your PC is connected to internet via ethernet.
I'm installed termux 118 and installed nginx server on my android 9,
I made a domain name ddns service - duckdns site,
connected my ip address, started the server,
and my site is up and running, but after a while,
I can't connect to the my site,
and see this error in windows network diagnostic:
"resource (myDomainName) is online but isn't responding to connection attempts."
Me interested, what is mean? Problem in my phone, server?
or something is blocking my requests to the host IP address of my home internet provider.
Or is it because the free domain name on duckdns is unstable?
I found only approximate answer to this error on the Internet:
-Reset TCP/IP and DNS Cache
-Turn Off Proxy Settings
-Reset Network Settings
-Disable Extensions/Add-ons On The Browser