My phone is on G928VVRU2BPD4. It's a Verizon carrier unlocked phone I currently use it with AT&T I'm on marshmallow 6.0.1. Since I use it on AT&T I cannot get any Ota updates I have to use odin. My question is can I switch it to AT&T firmware? Also is the AT&T version root able if I am able to switch it?
Unfortunately no.If y had an....lets say g928f carrier locked then yes switching is easy but since you have an g928v (the v at the end stands for verizon) you cannot change to another firmware since its a verizon model and there are no other firmwares for it.
I recently activated my SM-N910A on my new T-Mobile account. The phone was out of contract, so I asked AT&T to unlock it, and they did. The phone is working properly with my T-Mobile SIM card, albeit on the AT&T firmware.
Is it possible to replace the AT&T firmware with a stock Samsung Firmware, or, at the very least, with the T-Mobile branded firmware (for SM-N910T)? I understand that the bootloader is locked on these AT&T devices. Is it possible to unlock the bootloader and load a different firmware onto the device?
AT&T firmware has SO much bloatware, and I've not had any luck finding a way to root the phone on this firmware, so I'm stuck with all that bloat. What are my options here? Thanks!
EDIT: The phone was updated OTA to Marshmallow (6.0.1) when it was on the AT&T network. Build number is MMB29M.N910AUCS2EPH7
I am unsure whether I need to change my firmware or not. I have the galaxy s8 at&t carrier unlocked variant. about 3 months ago I flashed the unlocked firmware on the phone so I could get updates. I'm using Walmart family mobile which is (MVNO) of Tmobile. I want to continue getting updates without bricking my phone. What should I do?
https://www.xda-developers.com/samsung-galaxy-s8-note8-bootloader-odin/
update to CRB1 from https://samsung.firmware.science/
My baseband version is G950U1UES2AQL1
My model number is SM-G950U1
I don't see either as an option on the link. any help?
I have a question. I have the Unlocked AT&T Samsung Galaxy S8 (didn't realise it was AT&T until I received it and turned it on) and when I go to update the software it says it is up to date but it is not. How do I update my software? I am not rooted or anything, the phone is in its normal state.
Is it an unlocked S8 with AT&T firmware or an unlocked AT&T S8? Also, what carrier are you using?
Either way, you can use Odin to flash the newest firmware. Search Updato.com for the firmware for G950U (AT&T variant if you want bloat) or for the G950U1 if you want actual unlocked firmware with no bloat. However, the newest that they have posted if CRF5 and CG3 just came out the other day.
I asked about carrier because:
If you're running on Tmobile for example, use the tmobile firmware. You'll have bloat but you'll get all the features and you'll be good to go on updates.
If you're using Tmobile and want Unlocked firmware download the TMO coded U1 firmware and again, you'll be good with updates.
@jpcdeux I would think it has AT&T firmware because it came with a few AT&T apps on it. However, it is not locked to at&t so I am able to use it in my country (St. Kitts).
Would I have to root?
No, rooting is not required to flash unlocked firmware
Thanks much @jpcdeux
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.