I was on stock ROM as @ Noob
Changed to Aex Extended 5.7 official because of garbage volume , now on Aex ROM bootloop ,auto reboot,Pubg ping unstable network and many more bugs told me to change it.
Finally
So I installed Crdroid ROM yesterdayIt is mind blowing but still I can't call someone on this one
:crying:(Volte is working fine)
But while calling there is no sound from speakers (both)
and even on headphone also Mic is not working so No one will hear me on the other side ...
Please Guys please give me solution for it.:cyclops:
PS: suggests some other ROMs with better stability and performance with battery life
I'm on 331,same problem
Bhone Myat Kyaw778 said:
I'm on 331,same problem
Click to expand...
Click to collapse
If volte is working and you are facing problem with calls try flashing this file. It may work.
https://forum.xda-developers.com/devdb/project/?id=27084#downloads
guys install any 9.0 ROM and get out of it! it worked for me.
My issue was started when I moved from 9.0 to 8.1, so however, every time when I used a higher ROM it fine but its impossible to come down.
but someone has reported that it didn't work for him, but I think you should try it. https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/guide-revert-custom-rom-to-stock-rom-t3808248/post77920970#post77920970
check this
good luck.
I did everything. But no use. please help me. I flashed the above zip but no use
dxsyrz said:
I did everything. But no use. please help me. I flashed the above zip but no use
Click to expand...
Click to collapse
I feel so bad about you to mate, I'm so terrified when I was #$%@ed up with the same issue and most of the developers or users has little understanding about every device, and we tend to do with our own knowledge but 90% we fail and there is none to help.
In my case, I found a guy who can do it for me, it's very expensive to return back to normal and I did, since then I don't do this experimental **** anymore, I better advice same to you.
In my very personal experience, I did not enjoy the Rooting power of wisdom than running into lots of problems. So I quit and bought One Plus 6 and will never root again.
I have reached my limits. So I hope you will find a good solution outside the XDA and stop the madness of root and use a good VPN like TOR and move on.
Good luck and I'm very sorry that I, not able to help you out.
refai said:
I feel so bad about you to mate, I'm so terrified when I was #$%@ed up with the same issue and most of the developers or users has little understanding about every device, and we tend to do with our own knowledge but 90% we fail and there is none to help.
In my case, I found a guy who can do it for me, it's very expensive to return back to normal and I did, since then I don't do this experimental **** anymore, I better advice same to you.
In my very personal experience, I did not enjoy the Rooting power of wisdom than running into lots of problems. So I quit and bought One Plus 6 and will never root again.
I have reached my limits. So I hope you will find a good solution outside the XDA and stop the madness of root and use a good VPN like TOR and move on.
Good luck and I'm very sorry that I, not able to help you out.
Click to expand...
Click to collapse
Maybe you just went faster than what you could comprehend, didn't research enough, hyper excited to try new things etc..
Yes, it's okay that you were frustrated and you won't do this again.
But, it's clearly stated that what we do here has it's ups and downs!
You just failed to understand the cost to benefit ratio for you.
Also what was prognosis for your problem that was so costly?!
Probably you should have used an older device to get your hands dirty and learn & tinker a bit!
Nothing can be done here for a hardware issue.
Though there are extremely talented and brilliant developers and some users too who gladly help and guide here.
Though in all fairness it's your opinion after going through bad experiences so I feel for you mate & on the flipside I do respect it.
Peace.
I have same problem but when flashed this dolbyplus zip my problem solve
thekrishna said:
I have same problem but when flashed this dolbyplus zip my problem solve
Click to expand...
Click to collapse
Life saver !!!! god bless you bro !!!
Bro, I used pie rom for 5 days after I flashed an Oreo rom with pico gaps.I got rid of incall volume problem. thanks to developers
hacker_zombie said:
I was on stock ROM as @ Noob
Changed to Aex Extended 5.7 official because of garbage volume , now on Aex ROM bootloop ,auto reboot,Pubg ping unstable network and many more bugs told me to change it.
Finally
So I installed Crdroid ROM yesterdayIt is mind blowing but still I can't call someone on this one
:crying:(Volte is working fine)
But while calling there is no sound from speakers (both)
and even on headphone also Mic is not working so No one will hear me on the other side ...
Please Guys please give me solution for it.:cyclops:
PS: suggests some other ROMs with better stability and performance with battery life
Click to expand...
Click to collapse
I Know the solution
1)flash fastboot stock 247 rom
2)flash twrp 3.2.2
3)install any of your favourite oreo rom
4)see mic will work now
5)reboot to recovery and select backup
Backup all the partitions
6) reboot to system and save both twrp 3.2.3 and twrp 3.2.2
.
7)If u want to use pie roms first install twrp3. 2.3. img and then flash your rom (mic works)
8)If u again want to come back to oreo roms just flash that twrp 3.2.2 reboot to recovery again
and restore that whole backup we created in step 5
9)Now Mic will work even after downgrade g from 9.0 to 8.1
Press thanks if it saved your Device and your time. ?????????????
thekrishna said:
I have same problem but when flashed this dolbyplus zip my problem solve
Click to expand...
Click to collapse
Work for me too.
Thanks.
thekrishna said:
I have same problem but when flashed this dolbyplus zip my problem solve
Click to expand...
Click to collapse
Thanks my friend, this fix worked on my Max Pro M1 (4GB version) running LineageOS 15.1.
My calls stopped working pretty much overnight, I'm still not sure what caused it. I couldn't hear the caller and they couldn't hear me. I wonder how exactly this fix works?
Edit: I just realized that Dolby Plus also disables SElinux. Is there no way around it?
I already have 3.2.3 installed, it's still not working. I'm running OxygenOS port
thekrishna said:
I have same problem but when flashed this dolbyplus zip my problem solve
Click to expand...
Click to collapse
Worked
Thanks for saving
thekrishna said:
I have same problem but when flashed this dolbyplus zip my problem solve
Click to expand...
Click to collapse
sadly I've just moving into Pie, but several things happened. And I'm about a few steps from going back to Oreo
thekrishna said:
I have same problem but when flashed this dolbyplus zip my problem solve
Click to expand...
Click to collapse
Thanks a lot my friend,u save my day
Related
i flashed AOKP on my S3 and it works perfectly. i hadn't made any calls up to that point but once i did i realized i wasnt getting any call audio. i googled and got to the thread below and flashed these files but no i am stuck in an endless bootloop.
http://forum.xda-developers.com/showpost.php?p=28159725&postcount=1
the ROM is really awesome and i dont want to go back to the previous one but unless the call audio issue is resolved i might not have a choice
HELP!!!!!
Hi,
Had same problem.
You should try to flash build 40.
There is no audio bug there.
Marvius said:
Hi,
Had same problem.
You should try to flash build 40.
There is no audio bug there.
Click to expand...
Click to collapse
thanks for the prompt response!
could you please send me a link if its not too much trouble. i erased my titanium backup files too....so i am pretty much screwed since i wont be having a backup of all my apps
sorry to hear...
https://www.dropbox.com/s/1oinzs5hjkrbdk8/aokp_i9300_build-40-(20120630).zip?m
There you go, AOKP build 40
thanks a bunch mate!
np mate
Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg
johannestheg said:
Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg
Click to expand...
Click to collapse
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.
strongst said:
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.
Click to expand...
Click to collapse
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards
johannestheg said:
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards
Click to expand...
Click to collapse
I sent it back for warranty.
strongst said:
I sent it back for warranty.
Click to expand...
Click to collapse
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem
johannestheg said:
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem
Click to expand...
Click to collapse
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?
Narasimha12 said:
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?
Click to expand...
Click to collapse
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee
johannestheg said:
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee
Click to expand...
Click to collapse
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.
Narasimha12 said:
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.
Click to expand...
Click to collapse
No didn't ever have this problem before, so thanks for the good news, I'll update after testing
So I tried it with the Tesla Rom and it worked fine
Thanks for the help
johannestheg said:
So I tried it with the Tesla Rom and it worked fine
Thanks for the help
Click to expand...
Click to collapse
Bingo
Sent from my Zuk Z1 using XDA Labs
Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:
sethnet said:
Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:
Click to expand...
Click to collapse
Latest lineage OS doesn't have this problem. If you are still getting the touch screen issues, try NucleaRom
Sent from my Zuk Z1 using XDA Labs
Hi!
I want to install official firmware via TWRP. Can someone port it to .img or something?
There is a error when I try to install via download mode and Odin ("fused").
My phone is J510MN, but J510FN is good too.
Hello again! Sorry but I need to up this topic one first time.
Thats error is common when we try to update via Odin an original stock firmware, unsuscessfully. But I'm not downgrading! I just need to be on 100% stock again.
A solution that I think: its possible to create a zip or img file for update via TWRP?
Im on the last TWRP Aroma launched on J5 2016 dev area.
Thanks "code crew"!
EDIT: The pic of the error described is attached below and... Sorry for my bad bad English!
i have you covered. right here https://mega.nz/#!IdEV1R6T!cwIy6vulfEbhHLvZ0V1oxSMSPLT03TBPFb_0hpt_yOQ
Debloated stock rom.
you can also flash light stock rom bt Genetic Enginer, it has also few extra features.
Wizardlysense said:
i have you covered. right here https://mega.nz/#!IdEV1R6T!cwIy6vulfEbhHLvZ0V1oxSMSPLT03TBPFb_0hpt_yOQ
Debloated stock rom.
you can also flash light stock rom bt Genetic Enginer, it has also few extra features.
Click to expand...
Click to collapse
Thanks master Wizard! Is there any bugs or something, related to pieces of software missing, because its an debloated rom modified?
But... Not that your work, guys, is not good. Au contraire!
Im questioning just because I have found a couple of not so annoying bugs on Light Stock ROM. But i dont reported because there little bugs that may be unrelevant to the almost everyone and relevant just for me, i guess.
Thanks again for the patient and expertise of our team of masters and misters!
Anyway Im downloading your mod rom now!
rodrigo82 said:
Thanks master Wizard! Is there any bugs or something, related to pieces of software missing, because its an debloated rom modified?
But... Not that your work, guys, is not good. Au contraire!
Im questioning just because I have found a couple of not so annoying bugs on Light Stock ROM. But i dont reported because there little bugs that may be unrelevant to the almost everyone and relevant just for me, i guess.
Thanks again for the patient and expertise of our team of masters and misters!
Anyway Im downloading your mod rom now!
Click to expand...
Click to collapse
No bugs at all
Wizardlysense said:
No bugs at all
Click to expand...
Click to collapse
Verified and approved!
No bugs at all (2)!
Cheers!
rodrigo82 said:
Verified and approved!
No bugs at all (2)!
Cheers!
Click to expand...
Click to collapse
I'm.planning to make another one from the latest firmware, Volte included :laugh:
Broken Link
rodrigo82 said:
Thanks master Wizard! Is there any bugs or something, related to pieces of software missing, because its an debloated rom modified?
But... Not that your work, guys, is not good. Au contraire!
Im questioning just because I have found a couple of not so annoying bugs on Light Stock ROM. But i dont reported because there little bugs that may be unrelevant to the almost everyone and relevant just for me, i guess.
Thanks again for the patient and expertise of our team of masters and misters!
Anyway Im downloading your mod rom now!
Click to expand...
Click to collapse
The Link to Mega... doesnt work anymore (
Link Please
Hello, I'm a new user this device, my previous smartphone was S8 (Exynos) but i swapped on OP5 8/128 gb
Now i have a question, which rom + kernel make better performance combo ?
I am running PureFusion with Lightning Kernel V15 and my phone performs like a beast
dzesiu2002 said:
Hello, I'm a new user this device, my previous smartphone was S8 (Exynos) but i swapped on OP5 8/128 gb
Now i have a question, which rom + kernel make better performance combo ?
Click to expand...
Click to collapse
+1 for Pure Fusion, I get up to 10 and a half hours screen on time with better performance than I get on OOS, noticeable by eye.
Ultimately, you may find a better combination out there, but the baseline for me is Fusion, it just works as it should, stamina and power.
rickysidhu_ said:
I am running PureFusion with Lightning Kernel V15 and my phone performs like a beast
Click to expand...
Click to collapse
Thanks for answer, i will try your combo for sure
dladz said:
+1 for Pure Fusion, I get up to 10 and a half hours screen on time with better performance than I get on OOS, noticeable by eye.
Ultimately, you may find a better combination out there, but the baseline for me is Fusion, it just works as it should, stamina and power.
Click to expand...
Click to collapse
Thanks for answer, which kernel do you use with Pure Fusion ?
dzesiu2002 said:
Thanks for answer, i will try your combo for sure
Thanks for answer, which kernel do you use with Pure Fusion ?
Click to expand...
Click to collapse
the one that comes with it mate, lightening, I tried blue spark which some people swear by but I didn't like it compared to lightening.
dladz said:
the one that comes with it mate, lightening, I tried blue spark which some people swear by but I didn't like it compared to lightening.
Click to expand...
Click to collapse
what governer and governer settings do you use with it?
fahadasad said:
what governer and governer settings do you use with it?
Click to expand...
Click to collapse
I haven't changed anything. So as it comes.
dladz said:
the one that comes with it mate, lightening, I tried blue spark which some people swear by but I didn't like it compared to lightening.
Click to expand...
Click to collapse
Thanks again, do you use latest version of rom ? Kernel include in rom is latest too ?
dzesiu2002 said:
Thanks again, do you use latest version of rom ? Kernel include in rom is latest too ?
Click to expand...
Click to collapse
Go for the beta-build. Really stable and awesome battery-life. That doesn´t include the latest version of Lightning kernel but you can flash that easy in your recovery.
ROM: https://download.purefusionos.com/r...n_cheeseburger-7.1.2-20171001_140503-BETA.zip
Latest Lightning Kernel: https://forum.xda-developers.com/devdb/project/dl/?id=27265
Gustav Karlsson said:
Go for the beta-build. Really stable and awesome battery-life. That doesn´t include the latest version of Lightning kernel but you can flash that easy in your recovery.
ROM: https://download.purefusionos.com/r...n_cheeseburger-7.1.2-20171001_140503-BETA.zip
Latest Lightning Kernel: https://forum.xda-developers.com/devdb/project/dl/?id=27265
Click to expand...
Click to collapse
Ok, what about performance ? Please tell me which gapps version to use and how perform installation.
dzesiu2002 said:
Ok, what about performance ? Please tell me which gapps version to use and how perform installation.
Click to expand...
Click to collapse
Super smooth, absolutely as fast as Oxygen OS. I always use "GApps" and here U should choose "ARM64" and "7.1". I recommend you to use either "Nano" or "Pico", but you could choose whatever you want!
1. Flash the ROM in TWRP
2. Flash GApps
3. Flash Magisk/Super SU (If U want to be rooted)
4. Flash "no_verity_op5.zip" (If your phone are dectrypted, otherwise skip this one)
GApps: http://opengapps.org/
Magisk (Will not break SafetyNet): https://forum.xda-developers.com/attachment.php?attachmentid=4302781&d=1508010356
Super SU (Will break SafetyNet): https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
No_verity = https://www.dropbox.com/s/vfpoa2x8g1x98k3/no_verity_op5.zip?dl=0
Gustav Karlsson said:
Super smooth, absolutely as fast as Oxygen OS. I always use "GApps" and here U should choose "ARM64" and "7.1". I recommend you to use either "Nano" or "Pico", but you could choose whatever you want!
1. Flash the ROM in TWRP
2. Flash GApps
3. Flash Magisk/Super SU (If U want to be rooted)
4. Flash "no_verity_op5.zip" (If your phone are dectrypted, otherwise skip this one)
GApps: http://opengapps.org/
Magisk (Will not break SafetyNet): https://forum.xda-developers.com/attachment.php?attachmentid=4302781&d=1508010356
Super SU (Will break SafetyNet): https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
No_verity = https://www.dropbox.com/s/vfpoa2x8g1x98k3/no_verity_op5.zip?dl=0
Click to expand...
Click to collapse
Thanks a lot mate Can u tell me more about what decrypted and uncrypted is ? and how check which status my device have ?
dzesiu2002 said:
Thanks again, do you use latest version of Rom ? Kernel include in rom is latest too ?
Click to expand...
Click to collapse
Yea mate it's always the latest version of the Rom, I always clean flash too.
I've tried all the Rom's on XDA for the Oneplus, No limits for me is the best OOS Rom (personal choice) but overall and for the things I need from it, plus Displaylink technology works indefinitely on it, on OOS Rom's it cuts out after around 9 minutes which is a deal breaker for me.
10 hours SOT is superb.
dladz said:
Yea mate it's always the latest version of the Rom, I always clean flash too.
I've tried all the Rom's on XDA for the Oneplus, No limits for me is the best OOS Rom (personal choice) but overall and for the things I need from it, plus Displaylink technology works indefinitely on it, on OOS Rom's it cuts out after around 9 minutes which is a deal breaker for me.
10 hours SOT is superb.
Click to expand...
Click to collapse
Thanks, well if i flash latest version of rom then i dont need download manually latest kernel because last version of rom have in latest version kernel ? Can i please link to version which you use ? I need install gapps, if yes which one ? And magisk is for root ? Big please for flash instruction step by step.
dzesiu2002 said:
Thanks a lot mate Can u tell me more about what decrypted and uncrypted is ? and how check which status my device have ?
Click to expand...
Click to collapse
Basicly:
Encrypted = Makes it more difficult for people who are not authorized to access information stored on the phone. You are thus safer when the phone are encrypted.
Decrypted = Opposite to Encrypted. The benefit with this one compared to Encrypted is a better performance.
You can check what U use by going to the settings menu, then head over to "Security & fingerprint", scroll down to the bottom and done.
PS: I am Decrypted!
Gustav Karlsson said:
Basicly:
Encrypted = Makes it more difficult for people who are not authorized to access information stored on the phone. You are thus safer when the phone are encrypted.
Decrypted = Opposite to Encrypted. The benefit with this one compared to Encrypted is a better performance.
You can check what U use by going to the settings menu, then head over to "Security & fingerprint", scroll down to the bottom and done.
PS: I am Decrypted!
Click to expand...
Click to collapse
Thanks, a lot Well decrypted mean better performance ? My device is encrypted how to decrypt ?
before anyone drops any more advice here to this user, please be aware that narrating the entire learning process for flashing makes you partially responsible for what happens to this users phone.
@dzesiu2002 i strongly advise you to do research on all of these topics before going any further. you could end up wasting a lot of your time or worse: breaking your phone.
research research research. for everyone's sake. i'm not trying to be mean. this is the best advice anyone can give you.
WaxysDargle said:
before anyone drops any more advice here to this user, please be aware that narrating the entire learning process for flashing makes you partially responsible for what happens to this users phone.
@dzesiu2002 i strongly advise you to do research on all of these topics before going any further. you could end up wasting a lot of your time or worse: breaking your phone.
research research research. for everyone's sake. i'm not trying to be mean. this is the best advice anyone can give you.
Click to expand...
Click to collapse
This. Also, not trying to be rude and it's awesome that everyone is so willing to help, but I don't think spoonfeeding is the best option. OP has tons of questions (many that are simple and can easily be answered with self-research).
As the user I quoted mentioned, you should visit other threads that have instructions and information on flashing, encrypt vs. decrypt and so on!
WaxysDargle said:
before anyone drops any more advice here to this user, please be aware that narrating the entire learning process for flashing makes you partially responsible for what happens to this users phone.
@dzesiu2002 i strongly advise you to do research on all of these topics before going any further. you could end up wasting a lot of your time or worse: breaking your phone.
research research research. for everyone's sake. i'm not trying to be mean. this is the best advice anyone can give you.
Click to expand...
Click to collapse
Man, i have much phones all of them always have custom rom and kernel, so i never brick the device... All rom, kernel have in own thread installation process and i going with it, newbie for sure will brick the device, if i flashed much devices without a break them, then really you still think im newbie ? Cmon in my thread in #1 post, i dont write " its my first time with flashing the device, am noob or something like that " Newbies having 100% understandable tutorial about unlocking BL, install TWRP or Root the device, but they still ask for help, did you see anywhere in OP5 section about i needed help with that ? First of all, im not stupid and know any flash is risk, but if device bricked then this is not the fault of the author of the topic, only it is the fault of the user who carried out the installation wrongly. This post is for you and means you have to post something like this in threads people who really are green and dont know anything about flashing.
dzesiu2002 said:
Man, i have much phones all of them always have custom rom and kernel, so i never brick the device... All rom, kernel have in own thread installation process and i going with it, newbie for sure will brick the device, if i flashed much devices without a break them, then really you still think im newbie ? Cmon in my thread in #1 post, i dont write " its my first time with flashing the device, am noob or something like that " Newbies having 100% understandable tutorial about unlocking BL, install TWRP or Root the device, but they still ask for help, did you see anywhere in OP5 section about i needed help with that ? First of all, im not stupid and know any flash is risk, but if device bricked then this is not the fault of the author of the topic, only it is the fault of the user who carried out the installation wrongly. This post is for you and means you have to post something like this in threads people who really are green and dont know anything about flashing.
Click to expand...
Click to collapse
i am NOT calling you stupid. i AM definitely calling you a newbie.
the questions you have been asking are very rudimentary when it comes to flashing ROMs. regardless of your previous experience, it is still best that you do a lot more reading. this obviously isn't what you want to hear, but it is as true as truth can be. if you don't know what encryption is, then you shouldn't be trying to work around it. you should be figuring out what encryption is in the first place.
Until Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong(gladly)
Behold... official Mokee 10.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can experience it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is almost bug free and could be used as daily driver.
Clean install is suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps
7. Reboot and enjoy your Z11
Edit: Audio is fixed now, some users suggested that battery performance is slightyy better now.
Vi7eta said:
Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong.
Behold... official Mokee 9.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can feast upon it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is released Recently and its a nightly build still.. Other then Audio bug (fix will be found below) and broken IR (no fix yet) haven't found any issue in last 24 hours Rom is almost bug free and could be used as daily driver.
Clean install would be suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Audio Fix: https://androidfilehost.com/?fid=1395089523397917582
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps and lastly audio fix
7. Reboot and enjoy your Z11
Click to expand...
Click to collapse
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
fares70 said:
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
Click to expand...
Click to collapse
Go through this page, you will find everything you are looking for.
https://4pda.ru/forum/index.php?s=&showtopic=782022&view=findpost&p=60483845
Be cautious if you flash Mk90.1 2019318, an user got bootloop.
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
valorien said:
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
Click to expand...
Click to collapse
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Vi7eta said:
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Click to expand...
Click to collapse
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
valorien said:
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
Click to expand...
Click to collapse
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Vi7eta said:
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Click to expand...
Click to collapse
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
valorien said:
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
Click to expand...
Click to collapse
As i mentioned its in beta i too am using it as my secondary driver.
Though i havent faced random shut downs but i apreciate you tried the rom and reported the issues.
Please share exact steps you took while flashing mokee.
Thank you, I am using it now, very good rom
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
Good to hear that you having a great ride with mokee.
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Basically there is no restart now, it can be used daily, very good work.
SolidSnake140 said:
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Click to expand...
Click to collapse
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Vi7eta said:
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Click to expand...
Click to collapse
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
SolidSnake140 said:
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
Click to expand...
Click to collapse
twrp 3.0.2.0. dosent support pie.
battery performance?
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
how is the battery performance, compared to the official ROM?
Good rom no hanging but it's over heating in gaming and getting shut down when gaming under 40 battery
jdigra said:
how is the battery performance, compared to the official ROM?
Click to expand...
Click to collapse
Almost same. Although depends on usage.. You might want to try it for yourself to get exact results.