Related
Hi,
i need to get this phone rooted please, no root apps works, @Chainfire maybe can help?
Any one be able to help if this can be rooted?
xxmcvapourxx said:
Any one be able to help if this can be rooted?
Click to expand...
Click to collapse
Here we go. This is for S320VLUDU2API3 firmware, but probably works on any revision 2 firmware.
KNOX should remain 0x0
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Flash the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
(See below for how to recover)
ENG_BOOT_S320VL_API3
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the ENG_BOOT_S320VL_API3.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
https://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Recovering from a soft brick:
Flash the stock firmware provided below wirh ODIN
https://firmwarefile.com/samsung-sm-s320vl
Good luck I hope it works for you.
.
ashyx said:
Here we go. This is for S320VLUDU2API3 firmware, but probably works on any revision 2 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Flash the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
(See below for how to recover)
ENG_BOOT_S320VL_API3
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the ENG_BOOT_S320VL_API3.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
https://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Recovering from a soft brick:
Flash the stock firmware provided below wirh ODIN
https://firmwarefile.com/samsung-sm-s320vl
Good luck I hope it works for you.
.
Click to expand...
Click to collapse
Hi quick question ,
i've done steps 1-3 worked fine - http://pastebin.com/raw/PbA49d0q
my next question cant i get a custom twrp to root it or custom rom cause kingaroot not working properly.
xxmcvapourxx said:
Hi quick question ,
i've done steps 1-3 worked fine - http://pastebin.com/raw/PbA49d0q
my next question cant i get a custom twrp to root it or custom rom cause kingaroot not working properly.
Click to expand...
Click to collapse
Unfortunately you can't install custom recovery on this device. This device has a locked bootloader.
What issues are you reporting, did you manage to gain root?
ashyx said:
Unfortunately you can't install custom recovery on this device. This device has a locked bootloader.
What issues are you reporting, did you manage to gain root?
Click to expand...
Click to collapse
when trying to root
By Kin9Root Won Chu chu in a few ROot failure 'not yet suitable ˉ a - condolence ˉ ˉ a ˉ a "` ` One by one - one 'one one '- one - the
i get i've tried the pc version and the apk a few tries i keep getting notifications in the settings it is set to permissive
ashyx said:
Unfortunately you can't install custom recovery on this device. This device has a locked bootloader.
What issues are you reporting, did you manage to gain root?
Click to expand...
Click to collapse
i keep getting stuck on this : https://s4.postimg.org/mxi70k1vx/Image3.png
figured it out -- it was the pin we just trying super me
xxmcvapourxx said:
i keep getting stuck on this : https://s4.postimg.org/mxi70k1vx/Image3.png
ok I tried 3 different cords, various lengths, and now no matter what I get this screen only
Click to expand...
Click to collapse
You're using the desktop version, please download and use the android English apk:
http://www.apkmirror.com/apk/kingro...-release/kingroot-5-0-5-android-apk-download/
.
Is there an update on this, did anyone achieve root?
.
ashyx said:
Is there an update on this, did anyone achieve root?
.
Click to expand...
Click to collapse
Hi,
Just update :
used the bootimge via odin works fine.
Installed kingaroot via app root takes a few times.
Superme (legit) brought removes kingaroot and installs super su and binaries then reboots <---- here i lose root again i have to use kingaroot sometimes it auto reboots it self.
My friend also has the same phone do you have skype or telegram so we can chat private
xxmcvapourxx said:
Hi,
Just update :
used the bootimge via odin works fine.
Installed kingaroot via app root takes a few times.
Superme (legit) brought removes kingaroot and installs super su and binaries then reboots <---- here i lose root again i have to use kingaroot sometimes it auto reboots it self.
My friend also has the same phone do you have skype or telegram so we can chat private
Click to expand...
Click to collapse
Does it reboot itself as soon as SuperSU me installs supersu? That's probably the reason for root not sticking.
You could try the script below, I have confirmation it still works for the same procedure.
Steps 3 to 12.
https://forum.xda-developers.com/ga...ide-how-to-root-tripping-knox-kitkat-t3129484
Obviously use updated apps and don't flash the boot partition.
You will also need to flash the system version of SuperSU not EverRoot.
When you get to step 12, don't flash the firmware.
Disable EverRoot and just flash this:
https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
That should give you permanent root.
Sorry, but I don't use any of those apps you posted.
ashyx said:
Does it reboot itself as soon as SuperSU me installs supersu? That's probably the reason for root not sticking.
You could try the script below, I have confirmation it still works for the same procedure.
Steps 3 to 12.
https://forum.xda-developers.com/ga...ide-how-to-root-tripping-knox-kitkat-t3129484
Obviously use updated apps and don't flash the boot partition.
You will also need to flash the system version of SuperSU not EverRoot.
When you get to step 12, don't flash the firmware.
Disable EverRoot and just flash this:
https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
That should give you permanent root.
Sorry, but I don't use any of those apps you posted.
Click to expand...
Click to collapse
Yes as soon as super su me installs ask to install binaries ans ask to reboot it will lose root.
I will try the script without flashing firmware
Thank you ill let you know how i get on
ashyx said:
Does it reboot itself as soon as SuperSU me installs supersu? That's probably the reason for root not sticking.
You could try the script below, I have confirmation it still works for the same procedure.
Steps 3 to 12.
https://forum.xda-developers.com/ga...ide-how-to-root-tripping-knox-kitkat-t3129484
Obviously use updated apps and don't flash the boot partition.
You will also need to flash the system version of SuperSU not EverRoot.
When you get to step 12, don't flash the firmware.
Disable EverRoot and just flash this:
https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
That should give you permanent root.
Sorry, but I don't use any of those apps you posted.
Click to expand...
Click to collapse
My friend done a tutorial what he did on the process when losing root he followed your first guide http://pastebin.com/raw/ZSZExWt6
xxmcvapourxx said:
My friend done a tutorial what he did on the process when losing root he followed your first guide http://pastebin.com/raw/ZSZExWt6
Click to expand...
Click to collapse
It's not related to the bootloader, the bootloader is still locked, it's simply an incomplete installation of SuperSU. Probably due to permissions.
Follow the guide posted above and you should be good. I'd also suggest using root package disabler to disable knox.
Hit search in the app and type knox. Disable all knox related files.
https://play.google.com/store/apps/details?id=com.kunkunsoft.rootpackagedisablerfree
.
So can anybody confirm where we're up to with this. Has root been achieved? Are we good to post this as a viable root solution?
ashyx said:
So can anybody confirm where we're up to with this. Has root been achieved? Are we good to post this as a viable root solution?
Click to expand...
Click to collapse
Hi,
still not rooting perm -- Followed the exact tutorial you have gave us , me and my friend and we both lost root.
stock > odin > kingroot apk > supersu me > flashfire > supersu-sytemmode.2.79 rebooted lost root.
the only way we can do this is not to ever reboot....to keep root
xxmcvapourxx said:
Hi,
still not rooting perm -- Followed the exact tutorial you have gave us , me and my friend and we both lost root.
stock > odin > kingroot apk > supersu me > flashfire > supersu-sytemmode.2.79 rebooted lost root.
the only way we can do this is not to ever reboot....to keep root
Click to expand...
Click to collapse
So even when flashing root with Flashfire still losing root? Did you try using the script posted above?
Also could you post a screenshot of Root validator after losing root?
I would also suggest flashing the stock firmware with FLASHFIRE.
Ensure to Uncheck the boot partition and disable EverRoot.
Add the system supersu zip to the install.
It may be remnants of Kingroot causing the issue. Flashing this way will ensure a clean system with just supersu.
Having the same problem
I can't even do the OEM unlock and wondering if Knox is stopping me from doing it. Kingroot gets to about 77% before giving up. Also tried "one click root" and "odin" and a couple of others. Tried to uninstall Knox with many different aps but noway will it let me. I bought this J3 in HongKong and it is full of crap and adds that pop up and cover the whole screen. I have had some negative affects on the phone with all the playing around I've done to the point where when I hold down the buttons (power volume etc) the phone just goes into its first normal boot screen and stays there. Hope I haven't hijacked the thread but thought I may have the same problem as the original thread poster
stanfox said:
I can't even do the OEM unlock and wondering if Knox is stopping me from doing it. Kingroot gets to about 77% before giving up. Also tried "one click root" and "odin" and a couple of others. Tried to uninstall Knox with many different aps but noway will it let me. I bought this J3 in HongKong and it is full of crap and adds that pop up and cover the whole screen. I have had some negative affects on the phone with all the playing around I've done to the point where when I hold down the buttons (power volume etc) the phone just goes into its first normal boot screen and stays there. Hope I haven't hijacked the thread but thought I may have the same problem as the original thread poster
Click to expand...
Click to collapse
Why can't you enable OEM unlock? Remove any pin/password from the device first.
ashyx said:
Why can't you enable OEM unlock? Remove any pin/password from the device first.
Click to expand...
Click to collapse
I was surprised at first when you directed me to this thread ashyx, the first word I saw was Kingroot and I was sure a dev such as yourself wouldn't use that.
I write against Kingroot all the time. It is information stealing malware that doesn't even give true root, packs PUPs, and sends IMEI and other info to China upon install (check the logcat).
And it's nortoriously hard to get rid of and replace with a different SU. From what I read above, true root hasnt' been achieved yet. Ive used KR a few times in the past, but never again. It used to be easier to replace KingUser w SuperSU. Not so much anymore.
Please folks, Kingroot IS NOT actual root ; please quit posting about it in a true professional developer site.
Ahyx, PM me if you wish. I'd like to work on any methods other than this. I can get the bootloader unlocked from Net 10. But not until having it hooked up w/ lthem for a year. I've already chosen to disconnect this device anyhow because I can't stand using a non-rooted phone. Too bad, it's a good machine. I got a great buy on it. $50US brand new. Same store today $99. WalMart = $120
I just bought an LG G3 for $45. Verizon model, interesting root. I had to downgrade firmware to achieve root. It's TWRPd, and running Dirty Unicorns 10.6, a nice rom, better once I mod it.
Tried the latest RR rom for it. Nougat was cool, but too early, too many bugs.
Here's my Cheat Sheet ! This is the same procedure I used a while back with N910VVRU2CPD1 . I just updated the thread to work with the newer package.
1. Odin SamMobile N910VVRU2BPA1
reboot and factory reset a few times if needed to remove custom icon
2. Odin hsbadr's N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar HERE
3. Unlock with the samsung_unlock_n4-fix PROCESS use SIM card for data. Wi-Fi will not work at this point.
4. Odin twrp-3.0.2-0-trltevzw.tar Uncheck Auto Reboot, Manually boot into TWRP
5. Odin hsbadr's N910VVRU2CPD1_StockRestore.tar HERE
6. TWRP BETA-SuperSU-v2.71-20160331103524, Factory Reset, boot system
7. Use FlashFire to Flash firmware package SamMobile N910VVRU2CQI2
( ! System and Cache only ! )
Your mileage may vary.
Before I install my personal apps I remove as much Verizon, Samsung and Google spyware as possible.
-------------------------------------------------------------------------------------------------
EDIT: I was able to skip the recommended rooting and unlocking of 5.1.1 and make the jump I described.
I did not do the unlock using Kingroot until step 3 and I did not permanent root with Super Su until step 6.
No matter how you get there the phone has to be on [Firmware] [MM] [6.0.1] [RetEd/DevEd] Safe Upgrade to Marshmallow [N910VVRU2CPD1] then you can use FlashFire.
Hyperlinks are in the text to most of what's needed.
Credit AstonsAndroid I found it HERE
I keep seeing people saying there is a way to just flash TWRP and Magisk and you're done. I'd like to avoid SuperSU and the other root methods if possible. How would that work with your updated guide? Thanks
My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839
RootMyNote4Please said:
My main concern is the spyware the guys on Reddit bring up. Not to use kingroot and the like. Was there any resolution to this thread you posted Dr cool? Want to unlock my bootloader and flash the MODest ROM but I want to be able to avoid spyware too. Thanks for your work.
https://forum.xda-developers.com/no...spyware-fix-fixed-lag-wi-fi-problems-t3433839
Click to expand...
Click to collapse
I'm not sure if it was spyware or what. but my phone performance better after cleaning out that folder.
Thanks doc. Is that a folder that gets overwritten when you flash a new room?
This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?
lodilovesmuffins said:
This says "Continue with sim card data because wifi wont work at this point."
What if we don't have any data right now? Will it still work?
Click to expand...
Click to collapse
Kingroot needs to connected to root. I never seen it work without a connection. N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar brakes wifi but you get it back with N910VVRU2CPD1_StockRestore.tar, I dont know why. It just works
RootMyNote4Please said:
Thanks doc. Is that a folder that gets overwritten when you flash a new room?
Click to expand...
Click to collapse
My best guess now is it's some kind of provisioning issue that is cleaned up. Some of the files deleted you may actually need some day.
does this require the developer version? btw how do i backup
I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.
RootMyNote4Please said:
I seem to lose root after I flash CPD1. Still have TWRP though and says developer mode. What could be causing this?
Edit - When I flash stock restore I mean. I get rooted on BPA/CPD and then when I go to the next step I'm losing root and Kingroot says it has no solutions. I must be doing something wrong.
Click to expand...
Click to collapse
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.
kevintm78 said:
As long as you have TWRP installed still you are in good shape. At that point, you could either flash (through TWRP) SuperSu or magisk (on certain kernels magisk install errors out in twrp). The main objective is to get the custom recovery (twrp) installed on the 6.0.1 bootloader and once that's done it's just a matter of flashing your preferred rooting method or flashing a rom that has root included.
You can use an app like this to check your bootloader to make sure it's the right one.
Click to expand...
Click to collapse
That's weird. I flashed SuperSU but it didn't show up in the apps and when I tried to use Flashfire it said I didn't have root.
Got there. SuperSU had an error message when I tried to install it the 1st time after flashing full system. So I rebooted and installed again. Now Flashfire crashes and won't open. Switched to Flashify and it seems to work ok.
Edit - Stuck here for now. Flashify can't seem to find the CQI2 file and I still haven't been able to get Flashfire to work. Tried an older version and still crashes when it checks to see if I have the pro version or not.
In case someone else has the same problem with Flashfire, it's because the program expired April 1st, 2018. Turn the date back on your phone and it will load.
Finally completed it!!!
Ok, so the things I learned from my trials and errors.
1) DON'T flash the kernal and SU after you root with the N4 fix. I did this the 1st 15 times and could never get Flashfire to work later on. So skip all of the stuff in that post after you flash TWRP. Then flash the next firmware step.
2) Uncheck auto time and date on your phone and roll it back to before 4/1/18 to get Flashfire to work.
I'm sure there are some more things and I'll add whatever else I think can help the next guy along. Good luck! And thanks for the guide doc!
Note: Did the phone icon on your lock screen disappear as well when you were done? The camera is there on the bottom right like normal, but the phone is gone on the bottom left and it displays the charging info there now.
Thanks for this - it was helpful to make clear that in my mind that despite what other guides say, there is no need to unlock a Lollipop bootloader with a Lollipop kernel + ROM first, and that we can boot a Lollipop kernel + ROM with a Marshmallow bootchain and unlock the Marshmallow bootloader from the get-go.
I tracked down the CQI2 full Odin and I made hybrid Odins that get you "rooted on N910VVRU2CQI2" in fewer steps, following hsbadr's file naming scheme:
N910VVRU2BPA1_N910VVRU2CQI2_FullFirmware.tar.md5: MM CQI2 bootchain/firmware/modem, LL BPA1 ROM/kernel/recovery
N910VVRU2CQI2_StockRestore.tar: MM CQI2 ROM/kernel (no recovery - TWRP isn't overwritten)
These should be fine as drop-in replacements for the files mentioned in steps 2 and 5 of your guide.
Using these obviously means that you are unlocking the CQI2 aboot instead of the CPD1 aboot in step 3 while temprooted, and - importantly - step 7 is unnecessary to get to a CQI2 ROM, which is good because Flashfire is now expired :3
I doubt there's much of a real benefit to being on the newer aboot, but hey, why not.
Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?
lodilovesmuffins said:
Hey, no one answered my question from a while ago. So I'll ask again, does this require the developer version of the Note 4?
Click to expand...
Click to collapse
No, this will work with both versions of the verizon note 4.
kevintm78 said:
No, this will work with both versions of the verizon note 4.
Click to expand...
Click to collapse
Ok, thank you very much. I'll try and root my phone with this tutorial now.
Please help!!!!
I followed this link because its supposed to be a way to downgrade from 6.1.0 to 5.1.1 so I can unlock boot loader. However, these instructions make no sense to me. Can someone PLEASE help me. I've been searching and searching for a way to root my note 4 (N910VVRS2CQA1) and can't seem to find a way. I've never done this before so I'm pretty clueless. When I read these instructions, I just don't understand what I'm supposed to be doing. A lot of this tech lingo means nothing to me unfortunately. I'm starting to thing I should just give up the idea of rooting this Note 4 that's getting slower and slower and just get a new one. I don't really want to though bc I love the fact that you can replace the battery. It'd be much easier to just root and upgrade.....well, easier if I actually knew how.
Please mirror.
ui_print("Target: motorola/aljeter/aljeter:9/PPP29.41/b1fe5:user/release-keys");
Download
As far as I know, you must be on the Sept. patch. So, you must downgrade firmware first. It also appears to be for the Aljeter only, so I don't know if it'll work on the Jeter.
I am not responsible for any bricked devices.
1. Downgrade to OPP27.91-143 first.
2. Extract gpt_main0.bin from the ota zip and flash it in fastboot.
fastboot flash partition gpt_main0.bin
3. Reboot to recovery, and apply the OTA update from your sdcard.
4. Let the system restart. It'll take about 10min.
Could anyone verify?
Figures it's for Aljeter. Makes me wonder if Jeter will get it at all.
yes it is for aljeter and is working fine
Spaceminer said:
Please mirror.
ui_print("Target: motorola/aljeter/aljeter:9/PPP29.41/b1fe5:user/release-keys");
Download
As far as I know, you must be on the Sept. patch. So, you must downgrade firmware first. It also appears to be for the Aljeter only, so I don't know if it'll work on the Jeter.
These installation steps need confirmation. I am not responsible for any bricked devices.
1. Downgrade to OPP27.91-143 first.
2. Extract gpt_main0.bin from the ota zip and flash it in fastboot.
fastboot flash partition gpt_main0.bin
3. Reboot to recovery, and apply the OTA update from your sdcard.
4. Let the system restart. It'll take about 10min.
Click to expand...
Click to collapse
Tested and working on G6 Play do Brasil!
Up and running in UK. G6 Play XT1922-2, Carrier: ID Mobile (Carphone Warehouse), retgb.
Can't get root though, Magisk won't install for me in TWRP. Unable to mount storage or OEM. Not that fussed about that though.
Butter smooth, no glitches so far, no random reboots, battery life is great but still under observation.
Eddster3000 said:
Up and running in UK. G6 Play XT1922-2, Carrier: ID Mobile (Carphone Warehouse), retgb.
Can't get root though, Magisk won't install for me in TWRP. Unable to mount storage or OEM. Not that fussed about that though.
Butter smooth, no glitches so far, no random reboots, battery life is great but still under observation.
Click to expand...
Click to collapse
That's a Pie/Magisk problem. Easy fix...
1. Format /data in TWRP using the "yes" option. Then reboot directly back into recovery.
2. Mount /vendor then flash the universal dm-verity disabler by zackptg5.
3. Reboot directly into recovery once more and flash Magisk.
4. Reboot normally, and install the Magisk manager app manually. Done.
(Magisk should disable encryption and verity, but I've never had it work %100 of the time for both. Hence the disabler.)
Spaceminer said:
That's a Pie/Magisk problem. Easy fix...
1. Format /data in TWRP using the "yes" option. Then reboot directly back into recovery.
2. Mount /vendor then flash the universal dm-verity disabler by zackptg5.
3. Reboot directly into recovery once more and flash Magisk.
4. Reboot normally, and install the Magisk manager app manually. Done.
(Magisk should disable encryption and verity, but I've never had it work %100 of the time for both. Hence the disabler.)
Click to expand...
Click to collapse
Thanks @Spaceminer !!!! I'll give it a go. I thought at first that I might need to make some sort of patched boot image and faff about quite a bit but your instructions are clear and straightforward.
I must say I'm impressed with the G6 Play. I had a Nexus 6P and a Pixel both of which died on me from physical and customisation fatigue. I could afford a flagship so got this to see be through and I haven't had one complaint yet.
The handful of Pie features and esthetics have been implemented well by Motorola and battery life is still epic on this device.
Edit: rooted and fully set up how I usually have my daily driver handset. Pie is so tasty!
Eddster3000 said:
Up and running in UK. G6 Play XT1922-2, Carrier: ID Mobile (Carphone Warehouse), retgb.
Can't get root though, Magisk won't install for me in TWRP. Unable to mount storage or OEM. Not that fussed about that though.
Butter smooth, no glitches so far, no random reboots, battery life is great but still under observation.
Click to expand...
Click to collapse
Ta for taking the plunge and testing mate! Was beginning to think we'd never get this thing, glad to know it works on the same model number as I've got
Now to figure out the exact detailed step-by-step to getting this going, considering I'm actually on the November update...
picopi said:
Ta for taking the plunge and testing mate! Was beginning to think we'd never get this thing, glad to know it works on the same model number as I've got
Now to figure out the exact detailed step-by-step to getting this going, considering I'm actually on the November update...
Click to expand...
Click to collapse
Op is a step by step. Literally. Downgrade to Sept = Flash the build specified. Except the bootloader etc.
Flash the gpt.bin from the new build, apply update.
madbat99 said:
Op is a step by step. Literally. Downgrade to Sept = Flash the build specified. Except the bootloader etc.
Flash the gpt.bin from the new build, apply update.
Click to expand...
Click to collapse
Well yeah, I know that much. I meant the extra stuff like unlocking bootloader and downgrading the firmware etc lol. Ta for the extra info, mind.
Extra questions though because despite being having novice experience of doing phone flashing stuff, I've never touched a soak test for official firmware before...but I'm guessing I'll have to move back to Oreo temporarily to get the official Pie update...? Or will it just shift up from this soak test version?
Anyone get this working with the xt1922-7?
Donavonn said:
Anyone get this working with the xt1922-7?
Click to expand...
Click to collapse
No dice! The bootloader won't accept the gpt.bin. I think the recovery partition is the only thing that gets expanded though, so... I think if someone makes a back up of Pie in TWRP, then I can make it work on our phone. My idea is this.
1. Restore a Pie system backup using twrp, including the boot.img.
2. Use fastboot to flash the modem, oem.img, and vendor.img. Basically flash every part that isn't a patch file.
3. Hope that crap works.
I think that, or something similar would make it happen. I'll be the lab rat if someone wants to upload a system backup.
Spaceminer said:
No dice! The bootloader won't accept the gpt.bin. I think the recovery partition is the only thing that gets expanded though, so... I think if someone makes a back up of Pie in TWRP, then I can make it work on our phone. My idea is this.
1. Restore a Pie system backup using twrp, including the boot.img.
2. Use fastboot to flash the modem, oem.img, and vendor.img. Basically flash every part that isn't a patch file.
3. Hope that crap works.
I think that, or something similar would make it happen. I'll be the lab rat if someone wants to upload a system backup.
Click to expand...
Click to collapse
Haha yes! Someone get this guy a backup! Also, if it does work, the UI and everything can be changed to English, right?
Okay quick question, considering it was said "Flash the build specified except bootloader etc."; what is meant by "etc" here? Which parts of the older firmware should I avoid flashing. I know I gotta get in on that sparsechunk action but what about the other stuff like fsg, modem, boot etc? Sorry for asking what's probably a very obvious question but I don't wanna accidentally bugger my phone up trying to get this working
Donavonn said:
Haha yes! Someone get this guy a backup! Also, if it does work, the UI and everything can be changed to English, right?
Click to expand...
Click to collapse
Yes, it should be possible on the first setup. I think if it works, LTE probably won't without an APN edit. That's what happens when I flash xt1922-5 RETUS firmware anyways.
picopi said:
Okay quick question, considering it was said "Flash the build specified except bootloader etc."; what is meant by "etc" here? Which parts of the older firmware should I avoid flashing. I know I gotta get in on that sparsechunk action but what about the other stuff like fsg, modem, boot etc? Sorry for asking what's probably a very obvious question but I don't wanna accidentally bugger my phone up trying to get this working
Click to expand...
Click to collapse
Flash every part of the old firmware that you are able to. The bootloader and gpt.bin usually fail to flash if they are older than your current version. You should still try anyways. If they fail, just continue flashing the next items in line.
Spaceminer said:
Flash every part of the old firmware that you are able to. The bootloader and gpt.bin usually fail to flash if they are older than your current version. You should still try anyways. If they fail, just continue flashing the next items in line.
Click to expand...
Click to collapse
Righto. Just to clarify, I'm gonna need to unlock my bootloader to make this downgrade happen, right?
picopi said:
Righto. Just to clarify, I'm gonna need to unlock my bootloader to make this downgrade happen, right?
Click to expand...
Click to collapse
Official firmware should flash without any issue on a locked bootloader. That's my understanding. I don't know if this is %100 accurate. Every Motorola I've ever had, I unlocked the bootloader immediately. So, I've never had to test this.
Spaceminer said:
Official firmware should flash without any issue on a locked bootloader. That's my understanding. I don't know if this is %100 accurate. Every Motorola I've ever had, I unlocked the bootloader immediately. So, I've never had to test this.
Click to expand...
Click to collapse
Righto. In that case I'll report back with my findings, but yeah I'd imagine it should work fine as well. We'll see, fingers crossed.
i know there are a few ways to root the S10+, now we are a half year futher and my question is; what is the easiest way to root the S10+???? because i can't get it done.....
Dont rkot you will regret it
Hi, you can root only if you own an Exynos model, check this first...
The easiest way is to root with magisk without twrp in my opinion, all instructions are in S10 Rom thread, it is the same for S10+. Remember that it will trip KNOX and you will not be able to use Samsung pay, all other apps as far as i know you can get work properly. For me SPay was not relevant, because it is not working in my country.
I have rooted my phone a month ago, installed AdAway and AfWall, some addition open sourse apps and i am totally happy with it=)
lambik333 said:
i know there are a few ways to root the S10+, now we are a half year futher and my question is; what is the easiest way to root the S10+???? because i can't get it done.....
Click to expand...
Click to collapse
I am stuck on canary Magisk not allowing me to patch the standard AP file I loaded onto my phone. It constantly spins "Checking for updates" and never lets me go to install and then patch the AP. Yes I have booted into recovery and erased al data and caches and checked that OEM unlock is greyed out and boot loader is unlocked.
https://imgur.com/lrZSjEm
[Imgur](https://i.imgur.com/lrZSjEm.jpg)
Sahmadsaab said:
Dont rkot you will regret it
Click to expand...
Click to collapse
What will we miss or why will we regret?
Issues rooting
Hey guys,
I am having issues rooting an S10 +, I used the guide to patch the AP file using magisk and then flashed it using odin, followed the rest of the guide to the letter.
Then once the device finally booted, it showed me the set up screen, then we back to the Samsung splash screen and had a a warning in red across the top of the screen that said "Only official binarys are allowed" and just kept on boot looping.
I then flashed the stock rom using odin, I have used the same process on an S10 without any issues.
Does anyone know where I may have gone wrong ?
AlienSexGod said:
I am stuck on canary Magisk not allowing me to patch the standard AP file I loaded onto my phone. It constantly spins "Checking for updates" and never lets me go to install and then patch the AP. Yes I have booted into recovery and erased al data and caches and checked that OEM unlock is greyed out and boot loader is unlocked.
https://imgur.com/lrZSjEm
[Imgur](https://i.imgur.com/lrZSjEm.jpg)
What will we miss or why will we regret?
Click to expand...
Click to collapse
Hi I'm having the same problem!
I found a solution because I wanted to restore the root of the device because I needed it
Canadian SM-G950W Snapdragon Samsung S8 on Android 9 user here.
I've been reading a lot trying to figure out what I can do with regards to rooting & installing custom ROM. But the available info is confusing and contradicting.
Could anyone please answer my questions below?
1. Can I root S8 that is running Android 9?
I've tried naively to flash CF-Auto-Root with Odin , but got an error.
2. Knowing that bootloader is locked I thought I could downgrade to Android 7 and unlock the bootloader
Paid for SAMMOBILE firmware, but Odin failed to flash Android 7. Then I read somewhere that you CAN NOT downgrade Samsung phones. Is that the case?
3. What is the roadmap for flashing custom kernel, ROM and rooting SM-G950W Snapdragon Samsung S8 on Android 9?
At the end of my wits here... Thank you in advance!
temuri said:
Canadian SM-G950W Snapdragon Samsung S8 on Android 9 user here.
I've been reading a lot trying to figure out what I can do with regards to rooting & installing custom ROM. But the available info is confusing and contradicting.
Could anyone please answer my questions below?
1. Can I root S8 that is running Android 9?
I've tried naively to flash CF-Auto-Root with Odin , but got an error.
Click to expand...
Click to collapse
Use Magisk. Flash TWRP, then install Magisk in TWRP. This won't be possible if the bootloader cannot be unlocked
temuri said:
2. Knowing that bootloader is locked I thought I could downgrade to Android 7 and unlock the bootloader
Paid for SAMMOBILE firmware, but Odin failed to flash Android 7. Then I read somewhere that you CAN NOT downgrade Samsung phones. Is that the case?
Click to expand...
Click to collapse
Depends on the binary version, the screen text in Download Mode should tell you. You can't downgrade the binary, so if it changed from 3 to 4 (for example) and is currently on 4, you can only flash binary 4 firmware, but you can't downgrade to 3.
temuri said:
3. What is the roadmap for flashing custom kernel, ROM and rooting SM-G950W Snapdragon Samsung S8 on Android 9?
At the end of my wits here... Thank you in advance!
Click to expand...
Click to collapse
I'll try to put this simply:
Enable OEM unlocking in developer options
Unlock bootloader (wipes data)
Boot device, set up Google/Samsung account, connect to the Internet
Perform a manual update check, do not download update
Check to ensure OEM Unlocking is still visible
Put device in download mode and flash TWRP; immediately boot TWRP, do not allow device to reboot into system, otherwise it will restore the stock recovery
Make sure you flash the Multidisabler in TWRP to disable encryption and recovery restoration
Flash Magisk in TWRP to gain root
Boot into system and set up device, install the Magisk app to manage root.
I would leave it on Pie. Anything below that has nasty vulnerabilities like X helper.
If you want more performance optimize it with Package Disabler or adb edits.
If that doesn't get it, get a N10+, a huge performance and cam increase.
How to read Samsung build numbers
@V0latyle
> Use Magisk. Flash TWRP, then install Magisk in TWRP. This won't be possible if the bootloader cannot be unlocked
But the bootloaded IS locked on Android 9, thus Magisk/TWRP can't be installed. Or did I get something wrong?
And since @blackhawk just said to leave it on Android 9 - can anything be done at all?
temuri said:
@V0latyle
> Use Magisk. Flash TWRP, then install Magisk in TWRP. This won't be possible if the bootloader cannot be unlocked
But the bootloaded IS locked on Android 9, thus Magisk/TWRP can't be installed. Or did I get something wrong?
And since @blackhawk just said to leave it on Android 9 - can anything be done at all?
Click to expand...
Click to collapse
I heard that Extreme Syndicate for S9 series may seem nice. (OUDATED THOUGH TAKE EVERYTHING NOT FOR THE FAINT OF HEART.)
temuri said:
@V0latyle
> Use Magisk. Flash TWRP, then install Magisk in TWRP. This won't be possible if the bootloader cannot be unlocked
But the bootloaded IS locked on Android 9, thus Magisk/TWRP can't be installed. Or did I get something wrong?
Click to expand...
Click to collapse
Are you saying it can't be unlocked? Or simply that it is not unlocked?
The bootloader unlock has nothing to do with the Android version. Whether you can unlock it might though.
temuri said:
And since @blackhawk just said to leave it on Android 9 - can anything be done at all?
Click to expand...
Click to collapse
Blackhawk is a cranky old curmodgeon, don't listen to him. Totally kidding, he's a smart guy.
So let's focus on Step 1. Enable Developer Options, do you see the OEM Unlocking toggle?
@V0latyle
first of all, thank you for your time and patience.
nope, no such thing under Developer options. neither grayed out, it's just not there.
temuri said:
@V0latyle
first of all, thank you for your time and patience.
nope, no such thing under Developer options. neither grayed out, it's just not there.
Click to expand...
Click to collapse
Your device is set up, you have a Google account added, and you're connected to the Internet?
V0latyle said:
Your device is set up, you have a Google account added, and you're connected to the Internet?
Click to expand...
Click to collapse
that's correct.
temuri said:
that's correct.
Click to expand...
Click to collapse
Okay. Current firmware version?
Settings > About phone > Software information
Baseband version: G950WVLU8CUF3
temuri said:
Baseband version: G950WVLU8CUF3
Click to expand...
Click to collapse
Okay, so you're on the latest update. See if you can download and flash CSL1
If that works try AQD9
Next time you're in download mode, either take a picture of your screen or post what it says for SW REV or RP REV
consider downloaded - 6min left.
should I use standard ODIN to flash it?
Bad news but OEM Unlock does not exist on North American models. So you are out of luck unless you have a low bit number which then you can go to @afaneh92 for US/Canada Samsung BL unlocking
webhook said:
Bad news but OEM Unlock does not exist on North American models. So you are out of luck unless you have a low bit number which then you can go to @afaneh62 for US/Canada Samsung BL unlocking
Click to expand...
Click to collapse
uh-oh... can you please explain the "low bit" part and how do I check it?
@V0latyle
An attempt to flash CSL1 failed with:
FAIL! (Auth)
Complete(Write) operation failed
Disregard message
ouchies. was too quick and contacted the guy already
temuri said:
ouchies. was too quick and contacted the guy already
Click to expand...
Click to collapse
2023 SM-G950U/U1/W Rev8 One Click Root/Safestrap Inject Method
Root Method For S8 U/U1/W Series Phones Rev8 Bootloader New 1 Click Method Brought To Everyone By oakieville He provide this free of charge so If you like maybe give him a little donation Paypal email is [email protected] Before Starting...
forum.xda-developers.com
I've tried this with my T-Mobile US GS8+. Works like a charm. Since you are on Bit 8 the stuff there is compatible with your phone. However you may brick stuff so be careful
You can join their Telegram chat for more information.