Hello everyone. I am running a sotck rom with magisk on my J7 2017 Pro. The audio was working fine (headphones and speaker) until i installed xposed framework through magisk manager. After i installed xposed , the speaker makes no sound , just a buzz. I uninstalled xposed framework through magisk manager but the speaker is still buzzing. I didnt get it in contact with any source of water or anything. I hope someone can help me fix this
Make full wipe to delete all system modified files.
Steku1997 said:
Make full wipe to delete all system modified files.
Click to expand...
Click to collapse
Turns out all i had to do is just power off and power oin the phone (not going for the straight reboot option) thanks anyways
Just hold power+volume down
Related
I have extensively searched the forums here for a solution, and haven't been able to find one. If someone knows how to fix this, or can try to help me, I would really appreciate it. I just updated my phone to Marshmallow, and everything is running great. I have SuperSU up and running, and TWRP installed. Everytime I try to install Xposed, my phone boots up, but once the boot finishes it just hangs on a black screen forever. The only way to get the device to boot is by flashing the Xposed uninstaller. I have tried disabling all of my Xposed modules in hopes that would fix the problem, but it did not. I am trying to flash the xposed-v79-sdk23-arm64.zip by the way. Does anyone know of a solution to this? Should I try to find and flash version 78? I've seen a bunch of people having no issues installing Xposed on Marshmallow, so I assume I am doing something wrong. I tried redownloading the file a few times too.
Thank you very much in advance for trying to assist me!! Happy Holidays everyone!
after flashing xposed, do you wipe both caches?. You also can try to install xposed application (apk) first and later flash xposed from twrp.
BooBzi said:
after flashing xposed, do you wipe both caches?. You also can try to install xposed application (apk) first and later flash xposed from twrp.
Click to expand...
Click to collapse
Thanks for your response. I tried wiping both caches before and after installing Xposed. I also tried it once with only wiping cache after. Each time, I already had the Xposed apk downloaded because I had Xposed up and running on Lollipop.
I'm running "xposed-v78-sdk23-arm64.zip" without issue on my MXPE on MM.
bw03 said:
I'm running "xposed-v78-sdk23-arm64.zip" without issue on my MXPE on MM.
Click to expand...
Click to collapse
Just tried that version. Same issue, boot animation finishes, then it's just a black screen forever. I'm going to try uninstalling the Xposed app and then installing the framework and see if that works.
Just for kicks, I uninstalled xposed v78 and installed "xposed-v79-sdk23-arm64.zip". It's working great on my phone.
I would try again. Do a hard power down during the hang at the black screen (hold power button down for 10-20 seconds?) and reboot to see if that fixes thing.
Edit: I should note, I cleared all the cache (including Davlik) before and after the install of xposed.
bw03 said:
Just for kicks, I uninstalled xposed v78 and installed "xposed-v79-sdk23-arm64.zip". It's working great on my phone.
I would try again. Do a hard power down during the hang at the black screen (hold power button down for 10-20 seconds?) and reboot to see if that fixes thing.
Edit: I should note, I cleared all the cache (including Davlik) before and after the install of xposed.
Click to expand...
Click to collapse
Just wanted to let you know I got it to work. I had to uninstall the Xposed app, uninstall the framework, and then reinstall the framework and reinstall the app. I had a few modules mess me up and cause the black screen and I had to start all over a ton of times, but after hours and hours I finally seem to have everything working for now. Thank you for trying to help, I appreciate it!!
Can you please advise how to uninstall xposed framework? I'm trying to do it via xposed Uninstaller but no luck... Thx in advance for any help
chris23445 said:
Just wanted to let you know I got it to work. I had to uninstall the Xposed app, uninstall the framework, and then reinstall the framework and reinstall the app. I had a few modules mess me up and cause the black screen and I had to start all over a ton of times, but after hours and hours I finally seem to have everything working for now. Thank you for trying to help, I appreciate it!!
Click to expand...
Click to collapse
How can u get the phone boot with xposed framework? my phone still black screen, waiting your answer.
the-light said:
Can you please advise how to uninstall xposed framework? I'm trying to do it via xposed Uninstaller but no luck... Thx in advance for any help
Click to expand...
Click to collapse
I'm not sure, I currently am not using Xposed anymore. The only way I know is to use the uninstaller and to uninstall the app from your phone. I'm sorry if I can't be of more assistance :/
stigers said:
How can u get the phone boot with xposed framework? my phone still black screen, waiting your answer.
Click to expand...
Click to collapse
Do you have any modules installed? If you install Xposed and then install the app, everything should work. Certain modules may not be compatible and they may prevent your phone from booting. You may have to turn off all modules and then turn them on one at a time and see what causes your issue.
chris23445 said:
I'm not sure, I currently am not using Xposed anymore. The only way I know is to use the uninstaller and to uninstall the app from your phone. I'm sorry if I can't be of more assistance :/
Do you have any modules installed? If you install Xposed and then install the app, everything should work. Certain modules may not be compatible and they may prevent your phone from booting. You may have to turn off all modules and then turn them on one at a time and see what causes your issue.
Click to expand...
Click to collapse
No modules, and even no installer app installed. Still black screen mm6.0.1 xstyle 1572 rooted and unlocked bl.
Possible Solution
I had the same problem on my moto, I ended up flashing version 86 of xposed framework and also updated the app to the alpha 4 version. After I did that I had to clear cache and then use root browser to change my xposed disabled file to another. After a long reboot I have xposed running again.
Hey guys, I've currently on offical Cyanogenmod 13 nightly. The default AudioFX that came preloaded with the ROM sucks, so I tried a few audio mods that I found across XDA. Here are the ones that I tried:
A.R.I.S.E Sound System
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
I installed the Deuteronomy Pack. The installation didn't gave me any errors. When I opened to Dolby Atmos app, it instanly crash. Viper4Andeoid gave me a message that the drivers are not installed. When I click to install, the app crashed. If even installed busybox and set SeLinux to permissive but it still won't work
XTREMEMusic
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
The problem with this is the mod only works in music players, not in other apps like YouTube, Spotify, etc. After a while, the mod stopped working and I cannot hear any sound difference at all. I cannot get it back to start working.
Any help would be greatly appreciated
i have tried both and they work fine! v4a needs some time to install driver, when it askes just tap yes and don't touch anything until it says to reboot. and don't flash sound system on each other, only on untouched system. BTW i'm using divinebeats
Sorry, can't offer a solution but just thought I'd say that I have used both Leviticus and numbers version of arise and have had no problems with any cm13 or cm14 Roms. I always install it straight away with the ROM and Gapps (boot to twrp, flash: ROM > Gapps > arise). Never had to mess with SeLinux. Also, don't know if it could make any difference, but I only use open Gapps (pico) or banks dynamic Gapps
foomanjackel said:
Sorry, can't offer a solution but just thought I'd say that I have used both Leviticus and numbers version of arise and have had no problems with any cm13 or cm14 Roms. I always install it straight away with the ROM and Gapps (boot to twrp, flash: ROM > Gapps > arise). Never had to mess with SeLinux. Also, don't know if it could make any difference, but I only use open Gapps (pico) or banks dynamic Gapps
Click to expand...
Click to collapse
Try arise on dirty unicorns. For me, there is no difference, I even recorded it. Look at the attachment
I use only clean V4A from this guy http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 and probably good old V4A 2.4.0.1 would be the same.
Works on latest CM13 nightly, permissive. Tried youtube just now, all good.
FPSUsername said:
Try arise on dirty unicorns. For me, there is no difference, I even recorded it. Look at the attachment
Click to expand...
Click to collapse
Sorry if it doesn't work for you. I am using it strictly for the boost in volume...it definitely does work for me!
One thing I did have to do is go to settings > apps, and enable storage permissions for both dolby Atmos and v4a.
Hey there,
I've had a problem with my fire TV gen 2 with FireOS 5.0.5 (rooted) that sometimes this b*tch would not boot with xposed modules enabled that I'd really love to have.
Now I finally seem to found an answer to my problems. One Xposed module that has been causing alot of problems but which I REALLY wanted to use was the "Holo Themer" modules which allows you to change the UI of apps. This one is really cool because it allows you to open Supersu, Xposed App Settings etc - you just have to set the ui to "Material Dark". Otherwise that apps dont open or FC.
What I found out is that they seem to be running fine for one boot, JUST AFTER ENABLING. I'm still investigating on how to make them permanently run even after reboot but now I wanna explain how to get em running at all.
So heres what you should try:
1. Download and install all the xposed modules you wanna use and also activate them.
2. Reboot by just unplugging and replugging the power cord.
3. If the firetv still boots, youre fin.
3b. If you end up in a bootloops:
4. Reboot to recovery and delete the following file: (through file explorer in TWRP): /data/data/de.rovo.xposedinstaller/conf/modules.list (dunno if i spelled the name of the app correctly but you get the point if youre a pro or advanced user)..
5. Reboot the device
6. Go to xposed installer after full bootup and re-enable all the modules. (because u deleted the modules.list the firetv did boot without ANY xposed modules activated).
7. Unplug and replug power. This time the b*tch should boot up with all the modules enabled. Mysteriously though, when you reboot again, you might end up in a bootloop again.. So this might just work for one boot....
---
Incase you still end up in a bootloop:
Delete the dalvik cache in the recovery, delete the modules.list as explained above. Reboot.
This usually means that your xposed module (version) is not running well with the firetv. So try to find out which module is causing the problem and try another version.
For the Holo Themer for example I found out that the latest version just isnt workijg for the firetv.. even with that "lil trick" .. so downgrade to 3.0 (in that case) and then rinse repeat.
-----
Enjoy
P.S. This is meant for pros or advanced users who really want to use certain xposed modules that seem to cause bootloops, not gonna answer any questions, esp. if theyre noob questions.. if you dont get what im sayin here just dont bother pls and keep on learning.
Xposed nougat and gravity box works great on the Qualcomm variant see attached image. I have cursor icons enabled when the keyboard is open, made the nav bar a little smaller and it fades when the screen isn't touched. Got rid of my battery icon and made it the white bar at the top of the screen, also centered the clock. Did some audio level tweaks too and the speaker on this thing is amazing.
can you please drop the xposed thread link here ?
in my case only xposed framwork working not the modules.
kartik verma said:
can you please drop the xposed thread link here ?
in my case only xposed framwork working not the modules.
Click to expand...
Click to collapse
Gravity box working perfectly here on mediatek variant
Xposed for nougat thread link:
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
drganbds said:
Gravity box working perfectly here on mediatek variant
Click to expand...
Click to collapse
try Max lock(app lock) Xposed module and report here.
What exactly was your procedure for installing Xposed on the Moto E4? When I try to flash the framework and reboot, my phone never gets past the Motorola/Lenovo logo. To get back in business, I have to reboot into TWRP and run the xposed uninstaller.
acspdx said:
What exactly was your procedure for installing Xposed on the Moto E4? When I try to flash the framework and reboot, my phone never gets past the Motorola/Lenovo logo. To get back in business, I have to reboot into TWRP and run the xposed uninstaller.
Click to expand...
Click to collapse
Did you wait? Sometimes it can take 10 minutes or more
madbat99 said:
Did you wait? Sometimes it can take 10 minutes or more
Click to expand...
Click to collapse
No way, really? I guess I'll give it another shot. (What's taking so long?)
[EDIT, a few minutes later:] It worked! The only hitch was that it was complaining about not being able to access its own cache directory. I moved it from adoptable storage to internal storage and cleared its data, and then it was OK. Although I still have to manually move the modules to internal after they install. (Any way to tell Xposed to use internal by default?)
Hi i'm new to this site and a newbie to ROMs and stuff. I flashed Viper4android fx legacy from Magisk and after rebooting my Asus zenfone max pro m2(LineageOS 16) the app still doesn't show up.
I've downloaded a couple of modules from Magisk and they all work just fine but when it comes to audio mods it's not showing up after flash(downloaded James DSP, same result as Viper).
I downloaded Ainur Narsil and Audio Modification Library too. Do they cause any problems(it said legacy device detected)? Either way i don't feel any difference.
Tl;Dr: Magisk Flashed audio mod not showing up after reboot.
P.S: are there any better audio mods?
This video helps i think give it a try