Hi,
My phone start to bootloop since some days ago. I didn't try rooting or install custom rom on it.
I try the recovery mode with cache wipe or data/factory reset but nothing work.
I got access to the ADB update and the Reboot to bootloader but i'm stuck with those option.
I search a little and I found that I can install update or reinstall original rom with the ADB (I made mistaken or misread this part).
So I Was looking for the original rom of my Crosscall Trekker X3 but the model say it's a Hisense.
Here is what the recovery say :
CROSSCALL / L636 / HS8952QC
6.0.1 / MMB29M / L636.3.1
Any idea on what I can do to unstuck my phone?
Related
Hello,
I did have CM13 installed on sm-a500fu and wanted to go back to stock rom. Downloaded right version (TWO-A500FUXXU1BOJ6-20151119145810 - 5.02. )) and flash process was without problem (ODIN) .Then i wanted twrp back and i cant do this no matter which version of twrp i use(twrp2.8.7.0-a5ultexx-19082015.tar,twrp-2.8.7.0-a5ultexx-20082015.tar). Recovery flash goes ok but cannot enter recovery.
Phone is always on Samsung logo
My suggestion is to flash again stock ROM, boot in stock recovery and wipe data/factory reset. Reboot to stock ROM normaly and after that you have to follow the steps to root and install twrp as mentioned in the other thread dedicated to it (I assumed you did that once when you flashed CM13).
In fact that's what I did on my phone...
Flash full stock and once done do a factory reset in stock recovery, do this 3 times, then flash twrp.
From the giver of stock roms
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....
Last working state :
1. Android O version WW-15.0410.1803.55
2. Bootloader unofficial unlocked
3. Rooted with magisk
Reason for flashing :
Update to latest Oreo then re-root but flashing failed due to magisk not being uninstalled first
Current state :
1. Able to enter fastboot
2. Twrp is intact
3. Magisk uninstalled using twrp
Actions already taken :
1. Uninstall magisk via TWRP
2. Re-flash WW-15.0410.1803.55 via TWRP
3. Wipe dalvik/cache
4. Factory reset via twrp swipe
Still stuck in bootloop
I'm thinking of flashing Oreo stock recovery prior to reflash Oreo firmware via Asus flash tool. Found Oreo stock recovery image from 15.04.10.1711.6. Is this usable? (Edit : found suitable version and bunch of other versions, big thanks to Iceboy91 on following thread : https://forum.xda-developers.com/zenfone-3/help/request-stock-recovery-boot-img-stock-t3763381 )
But before I do anything even more stupid, I need your advise on correct next moves, guys.
Flash raw oreo via Asus flash tool and all will be fine.
[email protected] said:
Flash raw oreo via Asus flash tool and all will be fine.
Click to expand...
Click to collapse
Will Asus FT run properly on TWRP i/o stock recovery? Last time I did it booted to TWRP and I can't proceed. Kindly confirm if it's possible and I'll give it another try. I am left with another option which is flashing corresponding stock recovery and boot image.
To save your time from trial and error recovering from similar problem, here's what I do.
Issues :
1. Flashing raw on stock with TWRP stuck on eternal 'unzip image'
2. Flashing raw on stock ROM with stock recovery and wipe data OFF was successfull but could not enter system (stuck on Asus logo with circling progress).
Also unable to enter stock recovery at this point.
Steps taken to recover from bootloop :
1. Flash corresponding recovery and boot image to replace TWRP (BE CAREFUL WITH SOFTWARE VERSION)
2. Firstly, flash basic Oreo RAW firmware which can only boot to fastboot found on this post : https://forum.xda-developers.com/zenfone-3/how-to/updated-unlock-relock-bootloader-t3749456
3. Flash full RAW Oreo firmware found on the very same post mentioned on #2, but with WIPE DATA SELECTED.
Note : Step 2 might be skippable, up to you to try
Hey ,
If you wanna upgrade to latest Oreo update, just follow these steps (most of the users did not report any kind of bootloop)
1) Flash stock recovery
2) Sideload the latest firmware .zip
3) Reboot and flash TWRP & Magisk
Link for stock recovery/boot images by @shakalaca :
https://mega.nz/#F!lw02CLpA!hpetR2-Sec1F__gHPNRE9Q!E09B3BbA
If anything happens, RAW firmware is there for you
Note: Do not remove/uninstall Magisk via TWRP. Flashing latest update will remove Magisk automatically.
Thanks for the tip, my problem has been solved, but better solution is certainly welcomed. Will do when caught in the same situation.
Here is what I do:
Skip automatic update and do it manually through TWRP.
First flash update then reinstall latest magisk in order within TWRP.
Reboot.
sanctitude888 said:
Will Asus FT run properly on TWRP i/o stock recovery? Last time I did it booted to TWRP and I can't proceed. Kindly confirm if it's possible and I'll give it another try. I am left with another option which is flashing corresponding stock recovery and boot image.
Click to expand...
Click to collapse
AFT just needs working fastboot.
Flashing raw via aft will restore all stuff to stock state.
Twrp will be replaced by stock recovery too.
I wouldn't recommend flashing stock zip via twrp.
Another way to get back to. Stock is to replace twrp by stock recovery (after wiping data, cache, system). Then flash boot.img and finally use update via SD card option from the newly installed stock recovery.
Also you can take twrp backup of stock rom (system, data, boot) and restore whenever you want to go to stock (after wiping system, data and cache).
All methods tried and tested.
Hello, so im stuck now on startup. I actually rooted my phone a week ago and everything's fine until I've downloaded some cracked apks online and restarted my phone. Please help what would i do now
imgur.com/a/07UWA4l
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Paramvir Singh said:
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Click to expand...
Click to collapse
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Never done this on my M1 but on my note edge,
When i got a bootloop, i simply reinstall stock rom, or just clean install custom rom
abcnormal said:
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Click to expand...
Click to collapse
Ok so it's good opportunity to try something new...first you need to download custom rom and gapps package to sd card (always a better option)or internal storage...do the downloads on pc or somewhere else...
1. Wipe cache, dalvik cache, system, vendor, data, internal storage(this one is optional)
2. Mount extsd card
3. Install Rom package...(i personally use xenonhd based on pie) from here https://mirrors.c0urier.net/android...tal/X00T/XenonHD-181007-Experimental-X00T.zip
You can try any other of your choice
4. Install Gapps package from here..http://download2264.mediafire.com/r0vq21tabscg/m1u4llu62bdwyos/BiTGApps-arm64-9.x.x-0.1-unsigned.zip
5. This step is optional if you want root access then flash magisk package from here..https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip and uninstall package from https://github.com/topjohnwu/Magisk/releases/download/v17.2/Magisk-uninstaller-20180921.zip ......after tge rom boot up install magisk manager from https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.0/MagiskManager-v6.0.0.apk
6. Reboot to system..first boot up will take 4-5 minutes...ENJOY
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
abcnormal said:
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
Click to expand...
Click to collapse
Stock rom available at asus website is not flashable through twrp...u need twrp flashable zip...download this file...
https://forum.xda-developers.com/showpost.php?p=77671149&postcount=83
And also decrypt file from here.... https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/mod-decrypt-data-t3787311
After flashing the rom...flash decrypt zip
And remember to wipe internal storage after flashing these two zips!
Hello sir i got stuck in bootloop in asus max pro m1
Actually its not showing anything screen is blinking as i try to turn it on. I was on custom rom and suppose to install stock rom and i followed every step but my phone doesn’t start its just reboot and nothing displays anything. Please can anyone tell me the solution of this issue.
did u solved issue
how did u soolves issue ??
Hello,
I wanted to reach out as I am having some difficulty getting custom ROMs to work correctly, and the issues I am experiencing seem to be unique in that no-one else in the ROM threads are having the same issues, so I suspect there may be something I am missing that is causing me issues.
I previously was on an older version of lineage, but decided to take the plunge and try out treble, so I have upgraded myself to EMUI 8.
The version I went to is 8.0.0.369, although the build number shows as 8.0.0.046 (0OXY).
From there I flashed a Treble TWRP - https://forum.xda-developers.com/p8...lopment/unofficial-twrp-3-2-1-0-oreo-t3773970
I then went to try out Haky86's LineageOS 16.0 Huawei P8 Lite 2017 PRA-LX1, but this required me to flash a new TWRP, but I had to do a ADB shell command to clear data every time I went into TWRP. I had a few other issues too, but there isn't much point going into them here. I raised them on the thread.
I then tried out DarkJoker360's LineageOS 15.1 for Huawei P8 Lite 2017 but I kept getting strange issues on first launch (Google services crashing etc)
I am now back to stock.
I can't work out why I am getting all of these strange issues given that most users don't have a problem. Is there something I am missing here?
I am pretty familiar with the standard process of flashing a ROM:
Clear Data & System
Flash ROM & GApps
Wipe data & Clear cache
Apologies for the long story, and thanks for your time in advance!
Thanks,
Charlie
Hey,thats my way.
After brick i flashed new stockrom over erecovery with wifi,in new rom it comes directly the last ota update,bo problem at all.
So i have perfectly installed all rom etc on my pra lx1.
First ive flashed Ascuccius twrp (need bootloader unlocked),from twrp i choosed shutdown device.
Now power on the phone until see the bootscreen with the warning blabla.There ive used volume + to boot to erecovery,there i done factory reset and reboot to twrp,in twrp i format data partition and rebootet to once more to twrp to flash rom and gapps with dalvik and cache wipe after flash,rebootet and have errors like you.So again to erecovery and again factory reset,now in twrp i flashed rom and gapps and wiped dalvik and cache and reboot system,boom,perfect.After this flashed Magisk to root,even perfect till now,have tested 3 times with different pie roms,no issues at all.So i hope you have luck and fun by do it,many greetz!!!