Related
Hey all, I'm new to the forums but I can't wait to get my 8125 working. I bought a replacement screen on ebay and a broken 8125.. on receipt all I got was a white screen, then last night I replaced with the new screen and got the cingular logo and the windows mobile "touch anywhere to set up.." message.
Well, touching it did nothing, and the keyboard didn't work, so i opened it up again.
Somehow when I opened it up, the power switch button circuit thing detached from the mainboard (and it looks like the owner before me had actually crazy glued it on!!) .. and now the thing won't power up, won't show a charge light... nothing at all when plugged in or attached to my PC. So I hope that detached power button is the culprit. Upon further inspection I saw that yet another had detached but I can't seem to find where it landed... this one for the little button next to the slider, I don't really know what it does yet.. .
.. so I guess first step is to solder that power button back on and see what happens. Does it sound like a missing power button circuit thing would cause the unit to no longer power on at all (even when soft reset when connected to PC, which used to power it on?)
Pete
i did this. it is hell to solder on. I would say replace the phone
thacmonster said:
i did this. it is hell to solder on. I would say replace the phone
Click to expand...
Click to collapse
Argh.. well, i'll give it a go with the power switch.... do you think it will affect the phone to be missing the comm manager switch off the mainboard too... or will the phone still function without this piece soldered on?
peteclark3 said:
Hey all, I'm new to the forums but I can't wait to get my 8125 working. I bought a replacement screen on ebay and a broken 8125.. on receipt all I got was a white screen, then last night I replaced with the new screen and got the cingular logo and the windows mobile "touch anywhere to set up.." message.
Well, touching it did nothing, and the keyboard didn't work, so i opened it up again.
Somehow when I opened it up, the power switch button circuit thing detached from the mainboard (and it looks like the owner before me had actually crazy glued it on!!) .. and now the thing won't power up, won't show a charge light... nothing at all when plugged in or attached to my PC. So I hope that detached power button is the culprit. Upon further inspection I saw that yet another had detached but I can't seem to find where it landed... this one for the little button next to the slider, I don't really know what it does yet.. .
.. so I guess first step is to solder that power button back on and see what happens. Does it sound like a missing power button circuit thing would cause the unit to no longer power on at all (even when soft reset when connected to PC, which used to power it on?)
Pete
Click to expand...
Click to collapse
Yes, the power on/off button being broken is the reason why you had a white screen, and only getting the splash screen after replacing the touch screen. If you're a good assembly man, I'd suggest try to solder the button back ln place or replace the device. As for the button by the volume slider, that's the comm manager button. If you can ever get to the homescreen, the comm manager icon to activate the comm manager (bluetooth, WiFi, etc. is in the system tray at the bottom of the homescreen.
It sounds to me the new screen was replaced improperly, accounting for nothing happening when you tap it.Try re-installing the replacement screen.
8125
2.25.11.1
I have problem with power button. when push pwr button dont,t off pda, but when hold pwr then lights off.
Power is never shut off in PDAs, thats the way PDAs have been designed.
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
afbcamaro said:
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
Click to expand...
Click to collapse
Do you have a problem with turning on? First, we need to know whether it is hardware issue or not...
What you can do in the mean time with the turning off problem is by installing a poweroff app like shutdownme, psshutxp, etc etc...
Absolutely no problem with turning on from standby... Right now i just lock the phone before placing it back in the holster.
To make it clearer if you HOLD the power button down the backlight will turn off only. It will still show the display image and keys will still function (it dims)
Well, I had the same issue with the latest WM5 ROM. I thought I was too stupid to press the button, then I thought the button was broke, then I thought, I'll have to live with it.
Now that I have flashed to WM6, no problems at all! Never even came to my mind that this problem once existed. So I guess that some ROMs just have this particular bug?
Stefan
I have tried all the roms as well as 2003 and have the same issue in all of them. And im not alone.
Power off Problem
I'm in same condition.
Had the same problem when using WM2003 second Ed.
Now I've installed WM6 but nothing changed:
I cannot power-off/suspend but can turn off backlight if press and hold power button.
When in standby the button works fine to turn on the device.
Also, sometimes volume turns up continously with "noisy" beep ...
Anybody solved this problems?
Thanks,
Ruben
(WM 6 - 5.60.00 build 18125.0.4.2
radio 1.12.00 )
Power button has two modes:
1. Click mode: Click it once for a short duration. This turns off backlight and can be resumed by pressing it again or by pressing OK button
2. Press and Hold mode: Press and hold for few seconds and release. This mode will dim the backlight and no other button will bring it back. This is some kind of deep sleep in battery mode. To resume the original setting, press and hold Power button again for few more seconds.
(p.s.: I am not sure if this behavior is true for all the BA models)
April 1,
I know these modes...
It seems that "mode 1" doesn't work at all...
I would activate "Button Lock" (settings-->button--> Lock(tab)--> "lock all buttons except power button") to turn-off backlight and "lock all buttons except power button" but I cannnot...
You solved this problem?
I have had this issue of not being able to power off. One way I always got out of it was by clearing the registry hive. Unfortunately this brings the PDA back to the basic ROM. At this point the power button worked without any issues. Upon reloading the software the problem may come back. I believe the issue is related to some programs. I can't recall which program it was that seemed to cause the issue. One other thing I think that also worked was just entering the registry and getting back out and doing a hard reset.
I had the same problem with my 6600. the message button also didn't work. Believe it or not, to fix it. I banged the lower half (4-way area) on my desk a few times. Not hard enough to break the screen. But prolly hard enough to free what was prolly a sticky key. And now everything is working.
i am too
the same ...
when i press the power quickly , nothing happen
when i press the power for 2 sec. the backlight turns off
i tried every thing .... including formatting my BA
any one solve it ???
I have this same problem, my power button does`t work. i tried installing different roms but without any chance to fix it. maybe its an mechanic issue. i will change pwr button, i hope this work.
Look at one of my previous posts. I fixed it, twice, and other users have used the same metod to fix it. I think the problem is "hung bit" hardware related because you can also send it in for service, and they will change a chip, but i never had to.
Basically, it is as if the top volume button is held down, and the volume is continuously going up on my HD, even when I try to turn it down, it shoots back up again, and is stuck on the volume screen. Sometimes, if I turn it down to silent, it will stay silent for a few seconds, then the volume goes up again and keeps going up.
Really annoying as it means the phone is basically unusable as I'm pretty much always trapped in the volume screen!
Any ideas?
I would suppose that a button is stuck!
Take of the back cover and take a good look at the buttons to see if anything could be wrong!
Wavac said:
I would suppose that a button is stuck!
Take of the back cover and take a good look at the buttons to see if anything could be wrong!
Click to expand...
Click to collapse
That's what I thought, but it looks fine to me
I had the same problem as you but I then realize that when I was putting down the volume while in a conversation was my face pressing the screen and increasing again the volume...could it be your same problem?
pureheart said:
I had the same problem as you but I then realize that when I was putting down the volume while in a conversation was my face pressing the screen and increasing again the volume...could it be your same problem?
Click to expand...
Click to collapse
Nope, because it happens if I don't touch the phone and just leave it on the table
Have you tried a hard reset?
Do a backup first.
Turn off the phone. If you can't pull the battery out.
Hold the volume up + down at the same time then press the power on button for about 1 second. Let go of the power button while keeping the volume up and down still pressed down.
You should see a blue / green / red screen then just follow the instructions on screen.
If this doesn't solve your problem then most likely something is keeping your volume up button depressed internally. Take it back for repair...
The volume slider malfunctioning is a big one on HTC devices known issues. I've had the same problem with my elf....and I've seen plenty that do too. Your best bet would be to take it to an authorized service rep. Sucks I know
Try to remove the cover and use it... the pressing mechanism is on the cover...
sectorlord said:
Try to remove the cover and use it... the pressing mechanism is on the cover...
Click to expand...
Click to collapse
Tried that, still the same problem.
I'm going to try a hard reset today, if I still get the problem, going to ask Orange to replace it. I wonder if they'll let me pick another phone, I'm getting a bit fed up with the HD!
I have the same problem, it occurs randomly and I discovered that if I quickly press the power button to stand by the phone and press it again to exit from stand by, the volume bug disappears and phone starts working well again. I thought it was a software bug but I still have it on 1.19. It rarely happens now on 1.13 was more frequent.
Hello there guys!
Recently my M2 power button stopped working, there is no click whatsoever. I checked it up and it seems that the small metal piece fell somewhere inside the phone. I found this dissasembly video : http://www.youtube.com/watch?v=BUXSmlwUC9Q
Now here is my question : it looks like while dissasembling you are ripping the phone apart, is there any permanent damage when trying to dissasemble? I could do it by myself, pasting the metal piece inside but I m a bit concerned about damaging the phone.
Thanks
Strange Milestone 2 power button problem
Hi, I have a strange problem in the power button too, but it's very rare (may be rare just for me)
The thing is that the power button suddenly stops working. If i take off the battery and put it again the phone boots without pressing the power button, and it still not working. Then after some time, it suddenly starts working perfect there is no need to press it stronger then normal.
I can't find out any patterns in this behavior. Another strange thing that happens is that sometimes the button works intermittently and delayed. Example: I do a long press of the power button and nothing happen, then the shutdown dialog shows 2 seconds after. And some times (the most) it doesn't
I'm a little bit confused about it, any ideas?
I've new info: i can't get into bootloader mode (the phone turns on but i get a black screen with no text)
Think I am getting the same power button problem now. How did your repair go?
Same problem here now, dunno if its really related to the power button or something
completely different is going to break down soon.
I will try to replace the whole flex cable with the buttons, but shipping needs some weeks.
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Luka keko said:
Hello, I hope this is the right forum for my question, sorry if I made a mistake. Anyway, my uncle bought this phone month ago in another country, everything worked fine until yesterday when LCD stopped working. After some time of trying to fix it, we concluded that if you press volume (up, down or both at the same time) button and then the power button, screen turns on and works for some time (couple minutes) but then goes black again. If you just press power button (without pressing volume button) it stays black but you can still hear it unlocks when you slide your finger across the screen, so touch screen works, phone works but LCD is black. I am guessing it's loosing connection but how does it turn on every time when I press volume button? It's very confusing. Phone was in a protective case since first day and it hasn't been dropped. Since it's bought in another country, it would cost more to return it there than to buy new one, so do you have any ideas? I have been replacing lcd screens for my friends last two years so I was thinking maybe I can disassemble it and check connections. Any help? sorry for my bad english
Click to expand...
Click to collapse
Hello there, I'm from Brazil, as my english may not be the best lol... So I have same phone as you and similar problem... The problem is that volume down doesn't work. Other buttons work fine though. Also, the phone always enters in safe mode, so I assumed the volume down button is being pressed all the time. Except that, I realized that I could enter in download mode (I tested, if I don't press volume down in the combo 'power button + home + volume down' it won't get into download) and if I press volume down to cancel it will actually cancel and restart the phone. So the button is working... Here is the part where I think the problem is similar. There was a time I turned the phone off, through the system as we normally do, and then it wouldn't turn on again. I realized it was actually turning on, but the screen was black. I tried entering download mode and tested on odin and it actually had entered download mode, but the screen was black... Then after several attempts it finally got back on again... So I think there is something related with the button circuit with the lcd, I don't know. I would like to know if you got to any solution there. I guess that instead of bringing you any solution I'm bringing another problem lol. Well if I have any other information I will post it here. Best wishes.