Hi everyone....some time ago i flashed a custom rom that required custom modem and bootloader after i flashed those thing my proximity sensor didn't work like before ever sense...i tryed flashing stok rom and reset factory nothing seems to be fix the problem. Please help...tnx alot
sajaad said:
Hi everyone....some time ago i flashed a custom rom that required custom modem and bootloader after i flashed those thing my proximity sensor didn't work like before ever sense...i tryed flashing stok rom and reset factory nothing seems to be fix the problem. Please help...tnx alot
Click to expand...
Click to collapse
i think your proximity sensor need calibration, take a look to this thread : https://forum.xda-developers.com/showthread.php?t=2569141
zlazaar said:
i think your proximity sensor need calibration, take a look to this thread : https://forum.xda-developers.com/showthread.php?t=2569141
Click to expand...
Click to collapse
Tnx dude u were right it did need a calibration but i used a this app instead...tnx alot :laugh:
Related
Hi,
I will say this because i think it matters a lot: first camera problems where after installing new roms like CM 12.1 but there was a nice cam fix so it was good. Yesterday i decided to put a new kernel and I bassicaly screwed everything up. My device didnt boot, I got a black screen after boot logo, so I decided to performa a wipe, and accidentaly wiped every f***ng particion, including system. I thoug to my self "Oh thank God i still have my TWRP recovery", but it was even worse. TWRP couldn't flash any roms ( I still had a CM rom on my sd card) the recovery would just blink and reboot again to it, I was done there completely. Read some forums, after that downloaded a rom for my phone from sammobile. Everything works exept rear camera. I checked that by code *#0*#. I installed different stock roms with different PDA's. I'm guessing that that is a issue that persists from a custom rom? Please help brothers. :highfive:
Why dont you flash a recovery and flash again cm with the camera fix?
Cm cam fix won't work
Flash Germany latest firmware, my device faced that too, but after i flashed dbt firmware, everything seems good ?
Enry997S3 said:
Why dont you flash a recovery and flash again cm with the camera fix?
Click to expand...
Click to collapse
I dont want to have CM anymore. Maybe at this time Thx tho
ziad311 said:
Cm cam fix won't work
Flash Germany latest firmware, my device faced that too, but after i flashed dbt firmware, everything seems good ��
Click to expand...
Click to collapse
Bro pls help http://postimg.org/image/a79kd2339/
ziad311 said:
Cm cam fix won't work
Flash Germany latest firmware, my device faced that too, but after i flashed dbt firmware, everything seems good ��
Click to expand...
Click to collapse
albertoblah said:
Bro pls help http://postimg.org/image/a79kd2339/
Click to expand...
Click to collapse
UPDATE: MAN I LOVE YOU #nohomo . My mistake when installing this german region was that i ticket re-particion. I looked that up on the internet that u should not do that. My camera is back again. Manny thanks!
Kind regards,
Alberto
Hi..my note 3 (n900) I used Dr.ketan lollipop rom
Screen rotation and all my sensor stop working suddenly ( how ever it was work with me before in same room)
I try *#0*# ..and all my sensor is fail test
Any help pls!!4l
Factory reset or if that fails flash stock rom .
Do a Factory data Reset or flash Stock Rom
[email protected] said:
Do a Factory data Reset or flash Stock Rom
Click to expand...
Click to collapse
And why do you post the same answer that is already posted ?
I have Galaxy s6 and my sensor not working any suggestion?
Neil_Hines said:
I have Galaxy s6 and my sensor not working any suggestion?
Click to expand...
Click to collapse
GALAXY S6 forum
i was in a custom rom after i flashed superSU v 2.78 proximity sensor and lighting sensor i tried mny time with another custom rom and a stoke rom like OX 2.1.1 but didnt work also ......any help
Mohamed shata said:
i was in a custom rom after i flashed superSU v 2.78 proximity sensor and lighting sensor i tried mny time with another custom rom and a stoke rom like OX 2.1.1 but didnt work also ......any help
Click to expand...
Click to collapse
Try using magisk instead, I think it is the version of SuperSU.
2.79 beta or something like that fixed it.
I tried many times flashing SU another version . Also I tried to erase persist.img and install a backup one doesn't helped . Also I tried to hard braking my. Phone back to original stock it doesn't help also.at least I bay a new sensor and replacement it also doesn't work. I AM SURE ITS SOFTWARE ISSUES
Are on leneage os??
lotfi lotfi said:
Are on leneage os??
Click to expand...
Click to collapse
no !! whay
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Evasi0n3r said:
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Click to expand...
Click to collapse
See for Italy I found this:
https://www.sammobile.com/firmwares/galaxy-s--neo/GT-I9301I/ITV/download/I9301IXCUAPH1/94320/
Product code:ITV
PDA:I9301IXCUAPH1
CSC:I9301IITVAOL1
This is for Sony Sensors
Here is another one for Italy:
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Obviously it is for Samsung sensors because of NI/NJ.
Donyou have Sony or Samsung?
If you have a working stock with Modem. You can make a Backup only of the modem and flash it over working camera stock (I think that must work).
spirit_of_the_ocean said:
See for Italy I found this:
https://www.sammobile.com/firmwares/galaxy-s--neo/GT-I9301I/ITV/download/I9301IXCUAPH1/94320/
Product code:ITV
PDA:I9301IXCUAPH1
CSC:I9301IITVAOL1
This is for Sony Sensors
Here is another one for Italy:
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Obviously it is for Samsung sensors because of NI/NJ.
Donyou have Sony or Samsung?
If you have a working stock with Modem. You can make a Backup only of the modem and flash it over working camera stock (I think that must work).
Click to expand...
Click to collapse
Thank's, how i can say what sensor i have? i've tried to restore a working modem backup from another motherboard with charger broken but the result is the same
Evasi0n3r said:
Thank's, how i can say what sensor i have? i've tried to restore a working modem backup from another motherboard with charger broken but the result is the same
Click to expand...
Click to collapse
First of all relax.
I would try the updato link. Flash the firmware.
1. Check if provider service works.
If it works then
2. Check if your camera works.
If yes modem and camera works it is a good stock for you.
Maybe you can try and post the results. Don't worry. There are lots of people who want to help.
spirit_of_the_ocean said:
First of all relax.
I would try the updato link. Flash the firmware.
1. Check if provider service works.
If it works then
2. Check if your camera works.
If yes modem and camera works it is a good stock for you.
Maybe you can try and post the results. Don't worry. There are lots of people who want to help.
Click to expand...
Click to collapse
I'm relaxed, sorry if i seems hurt hahaha.
If this could help i can post Samsung info screen.
I have to try both firmware?
Evasi0n3r said:
I'm relaxed, sorry if i seems hurt hahaha.
If this could help i cani post Samsung info screen.
I have to try both firmware?
Click to expand...
Click to collapse
Try this at first:
https://updato.com/firmware-archive-select-model?record=3C31E6DACA1511E69215FA163EE8F90B
It is I9301IXUAPG1
A good Italian guy on homies wrote:
Alessandro ?, [29.03.18 21:29]
Because if it has sony sensor same to me, it needs to flash old stock and update via ota
Alessandro ?, [29.03.18 21:31]
This is the old stock for sony sensor
Alessandro ?, [29.03.18 21:32]
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Click to expand...
Click to collapse
Hey
Evasi0n3r said:
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Click to expand...
Click to collapse
HEY, i'm an Italian Boy
I have sony sensor and I think you have the same to me,
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2 use this firmware and tell me, if you need help, text me on telegram @vespino_21
I have to wipe all or i can dirty flash those firmwares?
Thank's
Evasi0n3r said:
I have to wipe all or i can dirty flash those firmwares?
Thank's
Click to expand...
Click to collapse
I would make a clean flash.
News:
I've flashed all two firmwares, but no one show me benefits, i have another s3 neo motherboard with charger defect (all chargers make the phone lag and reboot sometimes) and all firmwares work well with reception.
I've followed these steps:
1) boot intwrp and wipe all
2) boot in download
3) flash (I9301IXXUANI1_I9301IITVANJ1_I9301IXXUANI2_HOME.tar.md5)
4) reboot
5) same very bad signal
other firmware:
1) boot in stock recovery and wipe
2) boot in download mode
3) flash (I9301IXCUAPH1_I9301IITVAOL1_I9301IXXUAPG1_HOME.tar.md5)
4) reboot
5) same very bad singal
I'm starting to think that this could be an hardware problem
Edit:
checked if my imei was bad for some reason, but is clean.
I need help, I unlocked bootloader installed custom rom and everything was fine, but suddenly the fingerprint reader stopped working.
Someone could help me? I need the fingerprint because the power button was broken.
BORNIOS said:
I need help, I unlocked bootloader installed custom rom and everything was fine, but suddenly the fingerprint reader stopped working.
Someone could help me? I need the fingerprint because the power button was broken.
Click to expand...
Click to collapse
Please mention in detail what did you do.
What custom ROM did you install??
What is your baseband verision (Please mention complete baseband)
Was it working earlier on the same Custom ROM and stopped working all of a sudden?
What troubleshooting did you try......reboot, clean flashing again, etc??
an apology for the delay...
First of all thanks for answering, information:
As most do the e unlocking of bootloader to install the TWRP of rajatgupta1998 same that I used to install the ROM Havoc 8.1, installation and use without problems until a couple of days after I no longer had the option of fingerprint in configuration or reacted the sensor for nothing, make several full wipes to see if I recovered and nothing, install Bliss 8.1, Arrow 9.0 and I can not get my fingerprint.
Currently I have the last stock ROM of Jerome-X, assuming I would recover the fingerprint with stock without success ...
My baseband is M8952_70030.25.03.62.02e ATHENE_LATAM_CUST.
Kernel ElementaryX G4.
If there is anything else that I must inform to receive help, I am available.
BORNIOS said:
an apology for the delay...
First of all thanks for answering, information:
As most do the e unlocking of bootloader to install the TWRP of rajatgupta1998 same that I used to install the ROM Havoc 8.1, installation and use without problems until a couple of days after I no longer had the option of fingerprint in configuration or reacted the sensor for nothing, make several full wipes to see if I recovered and nothing, install Bliss 8.1, Arrow 9.0 and I can not get my fingerprint.
Currently I have the last stock ROM of Jerome-X, assuming I would recover the fingerprint with stock without success ...
My baseband is M8952_70030.25.03.62.02e ATHENE_LATAM_CUST.
Kernel ElementaryX G4.
If there is anything else that I must inform to receive help, I am available.
Click to expand...
Click to collapse
Did you try flashing stock rom again??
There can be some other issue too like a hardware problem or something else.
Heeth21 said:
Did you try flashing stock rom again??
There can be some other issue too like a hardware problem or something else.
Click to expand...
Click to collapse
Original Stock not yet, only an optimized version of stock
BORNIOS said:
Original Stock not yet, only an optimized version of stock
Click to expand...
Click to collapse
Try flashing stock ROM again and please reply if it worked.
Heeth21 said:
Try flashing stock ROM again and please reply if it worked.
Click to expand...
Click to collapse
Ok, try and comment
BORNIOS said:
Ok, try and comment
Click to expand...
Click to collapse
Did it work?
Not Work
Heeth21 said:
Did it work?
Click to expand...
Click to collapse
restore factory, bootlogo recovery stock firmware, everything and it did not work, I get tired and I can not recover the fingerprint
BORNIOS said:
restore factory, bootlogo recovery stock firmware, everything and it did not work, I get tired and I can not recover the fingerprint
Click to expand...
Click to collapse
Do you mean restoring from TWRP??
You should flash Stock ROM.
If it still doesn't work, please attach screenshot of about device.
No TWRP
I Flash Stock with ADB/Fastboot
BORNIOS said:
No TWRP
I Flash Stock with ADB/Fastboot
Click to expand...
Click to collapse
Please attach a screenshot of about device.