Hello,
first of all thank you to those who will take time.
I have a A5 2016 sm a510f. I installed the ROM OAKP 8.1.
I wanted to return to a samsung firmware for reasons that will occupy another post.
my problem is that the boot stops at the samsung logo and it runs in a loop. it must be a bootloop I think ...
I flashed the firmware with odin and I add twrp.
I may have to add magisk?
I previously installed the Google product rom. when I turn on the phone the google logo is still displayed before the samsung logo despite a complete wipe with twrp.
there would not be an interference?
Thank you for your help. cordially
Related
Hello,
My device is Galaxy Grand Prime (SM-G530H) and the codename is "fortuna3gxx" with KitKat 4.4.4 stock ROM (build: G530HXXU2AOC2). I flashed TWRP available on the official site (https://twrp.me/devices/samsunggalaxygrandprime.html). All went successfully.
But when I booted into TWRP, the screen is HORRIBLY BLUR!!!
https://drive.google.com/file/d/0B7zybiZ0MstcU19rVFIzTjJQTXc/view?usp=sharing
I reinstalled the OS, but still the same. Can't touch any button. The only way to get out of it is to pull out battery and boot normally.
My phone's RAM is low (around 850MB), so I don't want to get into Lollipop.
Any idea to fix the issue? Or at least, could you give me the perfect TWRP img.tar to flash?
Shadow1024 said:
Hello,
My device is Galaxy Grand Prime (SM-G530H) and the codename is "fortuna3gxx" with KitKat 4.4.4 stock ROM (build: G530HXXU2AOC2). I flashed TWRP available on the official site (https://twrp.me/devices/samsunggalaxygrandprime.html). All went successfully.
But when I booted into TWRP, the screen is HORRIBLY BLUR!!!
https://drive.google.com/file/d/0B7zybiZ0MstcU19rVFIzTjJQTXc/view?usp=sharing
I reinstalled the OS, but still the same. Can't touch any button. The only way to get out of it is to pull out battery and boot normally.
My phone's RAM is low (around 850MB), so I don't want to get into Lollipop.
Any idea to fix the issue? Or at least, could you give me the perfect TWRP img.tar to flash?
Click to expand...
Click to collapse
same problem here
ohh donno what to do..?
hi Guys
after running Lineage 14.1 for a while i have to return to stock.
After following various guides i am stuck at the samsung boot logo.
Using ODIN i have tried 5.0.1 and 6.0.1 firmware and both appear to flash ok in ODIN with "Success"
After a 5.0.1 flash, it boots and goes through the Android optimising applications process but after that and a reboot it gets stuck again
Flashing 6.0.1 does not even get the the optimising stage and gets stuck
I struggle to boot into recovery and cannot power down at all
Now completely baffled and looking for help.
Thanks -
AirwolfUK said:
hi Guys
after running Lineage 14.1 for a while i have to return to stock.
After following various guides i am stuck at the samsung boot logo.
Using ODIN i have tried 5.0.1 and 6.0.1 firmware and both appear to flash ok in ODIN with "Success"
After a 5.0.1 flash, it boots and goes through the Android optimising applications process but after that and a reboot it gets stuck again
Flashing 6.0.1 does not even get the the optimising stage and gets stuck
I struggle to boot into recovery and cannot power down at all
Now completely baffled and looking for help.
Thanks -
Click to expand...
Click to collapse
Did you factory reset before you flashed stock?
The 1 file "HOME" stock firmware doesn't factory reset after flash, so maybe that's why.
Try find a 4-file firmware of latest version available. They perform reset after flash and usually fixes most software problems.
thanks tys0n for your help and direction.
Managed to get TWRP back and then factory reset + advanced wipe everything
ODIN 6.0.1 and everything is back to stock
thanks again -
Hello everyone,
please i need help to understand and solve a bootloop problem when the device is turned on.
I have a samsung A5 2016 SM-A510F on which I installed the ROM AOKP android 8.1. Rom Aokp works very well but I can not change ROM anymore.
I have TWRP recovery and odin on the pc. when i flash the rom or even samsung firmware i have a bootloop at boot time when the logo is displayed. on the other hand when I put my backup with aokp everything works.
thank you for your expertise
It's looking strange flash original rom from SAMMOBILE via ODIN only...
Hello guys,
here I am on the Galaxy S8 bootloop caused by flashing following firmware using Odin 3.14:
G950FXXSBDUA3 FIRMWARE.
After that I got bootloop on Samsung Galaxy S8 logo. I can't downgrade to previous version, as Samsung blocks that and I can't flash TWRP neither (when trying to do so I get "Only official released binaries are allowed to be flashed (RECOVERY)" ; I've forgotten to tick "OEM Unlocking").
So now I'm stuck at the moment where I don't really know what to do. Have I bricked it completely or is there any way to recover?
Thanks in advance for answering.
Cheers.
UPDATE: I just solved the problem. The solution was to flash the stock ROM again, but this time with the .pit file and tick the Nand erase and Re-Partition. After that it booted normally. Hope this will help some fellows with similar problem.
My S8+ stopped booting since I flashed the latest version of Firmware G955FXXSBDUA3
Later I flashed as well G955FXXUCDUD1 and got PASS on Odin.
It is stuck on Samsung S8+ screen. Can anything be done about it?
I had the same problem.
My problem was solved by replacing the hard drive.