Sorry about this post in "GENERAL". I can edit the post, asking for forgiveness yet do not know how to move to Question And Answers. If any moderators of this forum can help me place this post where it needs to be, please do so. Your help in the forum is greatly welcomed.
I was using Autorec, TWRP_recovery on a rooted VS980 for flashing CM12, GApps, and another TWRP. Using TWRP there was a failed install, and I assume the GApps or the new copy of TWRP was the bad install -it had to be one of those for I installed CM12 first and went back using the TWRP. I did the 2nd install by adding a zip in TWRP installing the new TWRP and GApps. One failed. Thinking I had a good install of CM12, I went to reboot and ran into PROBLEMS. The LG G2 in turn on LG logo comes on for 1 second and the display is powered yet nothing. When I connect the phone to the computer hundreds of format device load the computer screen.
Can the phone be saved?
Related
So after having my HTC Incredible for years and never having a problem rooting and installing custom roms, I recently purchased an LG G2 from Verizon and have had nothing but problems getting a custom rom on it. I am currently trying to install Malladus and have been through multiple writeups for rooting, installing TWRP and flashing a new ROM. Everything seems fine until I'm in TWRP and have finished the install of Malladus,LG apps and gaps when it says "your device does not appear to be rooted. install supersu now?" I am rooted and have confirmed it in IOroot and Flashify before attempting anything. It then hangs on the LG boot screen indefinitely (I fell asleep and it was still there when I woke up) I managed to use Flash tool to get back to stock and read through everything again to make sure I was doing things right and then tried again. No difference, I"m stuck on the LG boot screen again. I read up on others having this problem and found nothing of any real value besides conjecture and "I tried again and it worked".
I always try to figure this kind of thing out by myself and hate not being able to do it this time but I'm at my wits end. I'll list my process below and any help would be greatly appreciated.
(I was on the OTA when I tried this process first and on the shipping version when I tried it the second)
1. Used IOroot to root the phone using this video a video I'm not allowed to link (search How to root your LG G2 by zetatango, Root was verified like in video)
2. Installed Flashify and put TWRP image in download folder and flashed it (Malladus, LGapps and gapps were placed in download folder as well), after it was finished booted into TWRP with no issues
3. In TWRP did thier standard wipe (not advanced) and then installed Malladus, LGapps and gapps
4. TWRP informs me of this "your device does not appear to be rooted. install supersu now?" On my first try I clicked yes on second I hit no to the same outcome
5. Stuck at LG boot screen and now have to go through process of using Flashtool to get stock again.
Any help would be greatly appreciated. Thanks in advance.
Yesterday I heard that you can use twrp 2.6.3.3 on stock KK but only later I found out that this is for single use only until I install some other rom
So first I installed freegee application from Google Play and than install TWRP 2.6.3.3 after that i reboot into recovery everything worked fine but since I do not intend to install what I decided to restart the phone and than i stuck on LG logo So all this happened just because the person who wrote that twrp works on KK did not write that works for single use only, of course, would not be a problem if I had any rom on the internal memory
Then I tried the LG flash tool but even there I did not manage to reinstall KDZ file I always get the message where it said the phone was disconnected message I get somewhere at 15% during installation So probably a mistake on this because I have turned on USB debugging but how to turn on if I can not do anything
I heard it through ADB installed the latest version TWRP 2.6.3.4 or 2.7.0.0 which have support for OTG and than put rom to OTG mini usb and try install it trough TWRP but now the question arises how to install a newer version
Please understand that I do not feel I understand the ADB and in other matters so please help and detailed explanation of how and what to do to save my phone
But first of all I apologize for my English and please do not ignore my problem if you have a solution and we can help you
sent u a pm in slovenian
[Q&A] [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATE
Q&A for [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATED]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATED]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
About flashing TWRP on the LG G2
This is a reply to the last post in the LG/TWRP post: http://forum.xda-developers.com/showthread.php?t=2449670&page=116
And specifically, I was about to ask the same question as "ctowne", about the lack of loki_flash in the loki package pointed in the instruction page.
I'm really stuck here, because I already "soft bricked" my phone (rooted LG G2 D802 international) in two different states that required a complete flash and wipe with the originale LG ROM and tool. And one of these was caused by the AutoRec tool, which apparently doesn't work for lot of people and could lead to bootloops.
So, before trying anything I'd like to be sure I'm doing the right thing, and more importantly, that I have the complete instructions to do it.
To sum it up:
-according to the thread, I need the loki package and the TWRP package, but there is no loki_flash inside the actual loki package
-but there's one inside the last TWRP package! Should I use this one?
-also, is not clear where I need to move all the files to make everything works
Thanks in advance.
pixelcamo said:
This is a reply to the last post in the LG/TWRP post: http://forum.xda-developers.com/showthread.php?t=2449670&page=116
And specifically, I was about to ask the same question as "ctowne", about the lack of loki_flash in the loki package pointed in the instruction page.
I'm really stuck here, because I already "soft bricked" my phone (rooted LG G2 D802 international) in two different states that required a complete flash and wipe with the originale LG ROM and tool. And one of these was caused by the AutoRec tool, which apparently doesn't work for lot of people and could lead to bootloops.
So, before trying anything I'd like to be sure I'm doing the right thing, and more importantly, that I have the complete instructions to do it.
To sum it up:
-according to the thread, I need the loki package and the TWRP package, but there is no loki_flash inside the actual loki package
-but there's one inside the last TWRP package! Should I use this one?
-also, is not clear where I need to move all the files to make everything works
Thanks in advance.
Click to expand...
Click to collapse
Are you sure you downloaded the correct version of autorec? I have a VS980 and autorec worked perfectly....even after updating to the latest version (26A), after which I flash TWRP 2.8.0.1 via recovery (which autorec installs 2.7.0.0).
simon_lefisch said:
Are you sure you downloaded the correct version of autorec? I have a VS980 and autorec worked perfectly....even after updating to the latest version (26A), after which I flash TWRP 2.8.0.1 via recovery (which autorec installs 2.7.0.0).
Click to expand...
Click to collapse
Apparently something went wrong with my first install. I tried again and the AutoRec flash went OK!
BTW, how do you update TWRP? Just flashing the zip via recovery and nothing else?
pixelcamo said:
Apparently something went wrong with my first install. I tried again and the AutoRec flash went OK!
BTW, how do you update TWRP? Just flashing the zip via recovery and nothing else?
Click to expand...
Click to collapse
Yes. Have whatever version of TWRP on your phone and flash it. Make sure to reboot recovery and it will show the current version flashed.
newbie
for starters my phone was rooted 2 hours ago , i used stump to root ,i have downloaded twrp and flashify from playstore...and im stuck i just want to finish the process i have lg g2 from sprint..i would appreciate any help thanx
help please
i have rooted my lg g2 but when i go into recovery to install a custom romm i get a dead android with his chest open and a red triangle with exclamation mark in it is there anyway to fix this with out a computer
I am using
VS980 4G LTE
Into recovery or custom recovery?
plz help
i have lg g2 32 gb.
thailand.bought 1 week ago.
it was running 4.4.2. when i checked ota it was latest. but when i checked through lg gupport tool. it had latest soft ver. then i updated . and got in trouble...
i saw that my mobile shows 10.6 gb, and baseband is unknown.
1. touch screen not work correctly. i touch something and open something else.
2. i have tried to upgared recovery. but after downloading the software lg support tool work stopped and get closed. also tried to factory reset but nothing changes.
3. then i tried to flash kdz.. and about 7 to 8 different kdz tried. but didnt get help.
4. then i tried to root and install custom recovery (twrp)
but first it didnt work then it worked by installing many drivers to recognized.
any how i got access to adb. and tried to root through loki_flash using adb.
i got rooted but when i triend to install twrp. it doesnt install neither through loki_flash nor adb sideload.
5. then some how i flashed the recovery through adb.and got access to recovery but i cant install anything beside ioroot.
6.i tried to install flashable rom, baseband or cloudy rom but didnt help . it shows E: footer is wrong , verification failed something like that.
7. when i use fastboot. it didnt recognize my device and show" waiting for device".
i didnt get qhsbulk mode in device manger but i get android lge in adb devices.
i think that i have lost efs partition and boot images.
Access:
have access to download mode, adb shell, stock recovery(side load).
please help me asap.
TWRP issue
i am installing TWRP recovery in my LG G2 D802 (D80210b) but i am getting this error kindly help me to solve the issue.
Flashify...
Can I install TWRP using flashify. ??
If you're on KitKat then - yes you can
Sent from my Nexus 5 using Tapatalk
Critical Error
Please help me! I just flashed with the method 2 and when i rebooted to recovery mode I got this:
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
My phone is working perfect I just don't have recovery!
I reflashed it but nothing!
twrp recovery error
hi there
i have a LG G2 D800 with android 4.4.2 and rom 20y,
some days ago i download TWRP latest version flashable zip file from TWRP site, i extract .img file from zip and flashed that with flashify [root] , but when flash complected phone reboot and goes to Recovery mod, in recovery mod shows 3 error in up side-right [seurce boot failed] and phone stay with a blach screen, dosnt worked . not bricked.
reset factory not response.
now i want to install MIUI 4.4.2 rom, but i havnt any recovery even lg offecial .
i dont now any thing about Adb shel, how ill can repair and install TWRP recovery on my d800 g2??
tnx a lot
Q&A for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
xolanir said:
So I flashed the latest TWRP 2.8.1.0 using ADB on my 2012 N7 running the official 5.0. Read the OP to see if it was compatible and didn't see anything mentioned about it. It flashed without an issue but upon booting into recovery, I got a dead robot with the red triangle with an exclamation. Does this mean that Android 5.0 isn't supported yet? Thx in advance for the help!
Edit: Reflashed and fixed. 1st flash was probably a bad download. Thx!
Edit 2: flashed recovery.img successfully, but was stuck on boot up for 30mins. Had to reflash device back to stock to fix. Is lollipop not supported yet?
Click to expand...
Click to collapse
same here
this work, thank you so much!
Franz22 said:
this work, thank you so much!
Click to expand...
Click to collapse
Was able to figure it out and make it work. Not sure what it was that didn't let cmd flash the recovery, but when I used the flashing recovery option in NRT, it worked like a charm.
http://forum.xda-developers.com/showthread.php?p=56752535
[RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
[quote name="bombadier" post=56749620]How are you installing the ROM? If you are using the factory images then extract the boot and system images and flash them using fastboot ,if its not booting past......
Sent from my Nexus 7 using Tapatalk
Trying to install last TWRP recovery on dev-unlocked HTC One (M7) via fastboot.
All was ok, but cannot enter into recovery. It shows me "Entering recovery" page with HTC logo and nothing happened.
And when i tried to use .apk into Android it says "TWRP Manager has crashed".
download website seems not working either with app or by website
is there any mirror ?
thanks
Anybody having 2.8.4.1 as a flashable zip?
Install TWRP on Xperia Acro S lt26w
Hi to all. How I can Install TWRP on my Xperia Acro S lt26w. I saw ROMS for my phone with TWRP, but I cant manualy install it becouse my phone model in TWRP Manager (ROOT) from Google Play is not listed.
Sry for bad English.
So i had hurricane v12 working on my n7100 for quite some time and today i decided to flash another rom, ihad twrp 2.7 installed on my N7100, so today i updated to twrp 2.8.6 in hopes of installing another rom, and right after twrp update when i rebooted i noticed i have no signal and that my imei is corrupted, it says it's unknown. i have an old efs.img but cant restore it, tried dr.ketans solution and this one and couldnt restore the imei. do i need to have same rom installed as when i made the efs backup? becaouse im not sure if the backup i have is from when i had hurricane installed, maybe its from 4.2 version of android. Is there any help for my phone?
Leads to bootloop
Moto G XT033 with Lollipop 5.0.2
TWRP was working nice until I make a ROM backup. After finishing the backup (only saved the ROM file. Did not restore) I rebooted the system and BAN! My phone was gone!
Searching a few topics, I found more users with the same problem: uses backup feature and get a bootloop.
Watch your steps, moto G users!
Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Spumpkin said:
Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
Click to expand...
Click to collapse
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
renzo090513 said:
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
cm11 => jb bootloader
cm12, cm12.1 and cm13 => kk bootloader
klemenSLO said:
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Click to expand...
Click to collapse
The current version is 2.8.7.3. Should I try other versions?
Did you solve the issue? Or is it still not allowing you to get into your F/W?
staylecrate said:
Did you solve the issue? Or is it still not allowing you to get into your F/W?
Click to expand...
Click to collapse
Hi!
I tried to install TWRP version 2.6.6.3, but it fails to flash it so I'm stuck with the version 2.8.7.3. All I'm able to enter is just the recovery mode. I can't enter the download mode so I can't flash the stock firmware.
Currently I'm out of ideas. I can't flash any OS, the TWRP fails everytime and creates errors.
Try flash bumped kernel like lp dorimanx then flash bumped bootstak then lp rom like cloudy or stock. Or google this: lg g2 unbrickable now xda ...that work for me