Help! TWRP stuck on logo - Samsung Galaxy S7 Edge Questions and Answers

hi, i format system partition with f2fs, and then my phone (g935f) off now i dont can open twrp only i see twrp logo. how i can fix this ?

Did you fixed it? i'm in the same situation

Fokit said:
Did you fixed it? i'm in the same situation
Click to expand...
Click to collapse
Flash stock rom via Odin ,that should fix it

Related

[NEED HELP]Phone stuck on "Warning:Bootloader Unlocked"...Urgent plz

Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
The same happend to me, you must have installed the wrong SU version, just reflash stock firmware via fastboot and reinstall OTA, then if u wanna root use SuperSU v2.61, hope it helps.
Just flashed the CM12.1 through twrp ,problem is solved in a way.
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
facing the same problem...... is flashing CM12.1 gonna solve it ?
praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
It will but you should have unlocked bootloader.
praveen1618 said:
facing the same problem...... is flashing CM12.1 gonna solve it ?
Click to expand...
Click to collapse
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.
anks095 said:
unlock ur boot-loader first ,then flash cm through fastboot or if u have twrp then copy the cm zip in the sd card and then flash it through twrp.But remember to wipe the system,cache,dalvik cache and data.problem should be gone.
Click to expand...
Click to collapse
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
It will work fine.Backup your current system using twrp and then flash cm12.1.
bablu048 said:
Sorry Noob question- when should I wipe the system,cache,dalvik cache and data ?? Before flashing cm 12.1??
And I am currently on mm rooted. And cm12.1 is based on lollypop, will there be any problem if I flash cm12.1?
Click to expand...
Click to collapse
hope fully there would not be any problem....but in case of going wrong with something you should make a back up with twrp to go back to previous build,and yes ,before flashing any rom, you should wipe your cache ,dalvik cache and data......and system if u need...depends upon you
about moto x stucked while rooting
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step
sonubisht said:
i was trying to root moto x play i unlocked bootloader but when i tried to root my phone stuked in WARNING BOOTLOADER UNLOCKED.......... I TRIED WIPE ALL DATA FROM RECOVERY.... i tried some research someone said try to flash cm12.1 with twrp but i dont know hot to do this..... my mob is not connecting with pc plz help me guyz plz contect me at my gmail [email protected] its very urgent......plz tell me what to do step by step
Click to expand...
Click to collapse
first of all, which super su zip u r trying to flash ???? only this super su - "SuperSU-v2.62-3-20151211162651.zip" works on MXP...... after unlocking the boot loader u need to flash first twrp custom recovery...then entering into twrp interface,format the whole internal memory (I m sorry,u have to do that,no other way is possible)...... then put cm12 zip which u want to flash in sd card then flash the zip through twrp....... I guess this way your problem would be solved.....
If u flashed the correct mentioned supersu you should be fine.It happened 3 times also to me.I just press power continuously to power off and then it boots normally.
Please in case of SuperSU do not use 2.62-3 anymore, use 2.79SR3. Both are supposed to work, but 2.79SR3 is newer and has some bugfixes.
Note: The release 2.79 will not work, the detection fix to install systemless for all Moto devices is only integrated in 2.79SR3. 2.62-3 does no detection, it always installs systemless.
that was rom problm
mausv said:
Well the thing you could do is factory resetting via TWRP or you could download a new ROM like CM 12.1 that you can find in the original android developer section and flash it with TWRP, your phone would boot up now. Keep in mind that you will lose everything.
Click to expand...
Click to collapse
that was a rom problem
my phone is not turning on pls help after updating one ota of marshmallow security patch 1 jan
anks095 said:
Just flashed the CM12.1 through twrp ,problem is solved in a way.
Click to expand...
Click to collapse
Is cm12.1 support direct volte calling,.? Or any other custom rom which support volte calls???.

[Help] How to solve "patching system image unconditionally..."

When I try to flash any custom rom via twrp recovery it's showing "patching system image unconditionally...". Then my phone bricked.
I've wiped everything. And tried many times. But same problem
Please help me, how to solve this problem...
I had this issue too. You have to flash newest recovery created by kumajaya.
mario_R said:
I had this issue too. You have to flash newest recovery created by kumajaya.
Click to expand...
Click to collapse
Thanks! I'll try

TWRP Problem??

Need a little help guys.....Was installing OTEL 5.3 custom 7.0 rom on my s7 Edge and got an error in twrp "unable to mount storage" so tried to do a wipe and reformat
now stuck in twrp reformatting ...can't do anything..reboot, shut off ...nothing
any ideas ??? please ??
Got the phone to reboot but now stuck on TWRP start page version 3.0.2.4
anybody ???
I can get into download mode...but when I restart goes to TWRP boot screen and gets stuck
wondering if I should go to Odin and reload stock rom ??
any ideas guys ?
skyeking69 said:
Got the phone to reboot but now stuck on TWRP start page version 3.0.2.4
anybody ???
I can get into download mode...but when I restart goes to TWRP boot screen and gets stuck
wondering if I should go to Odin and reload stock rom ??
any ideas guys ?
Click to expand...
Click to collapse
Yes, you should definitely try to flash the stock rom via odin. To me it seems that you might have forgotten to update your bootloader and modem and that's why it isn't booting up.
TheSproker said:
Yes, you should definitely try to flash the stock rom via odin. To me it seems that you might have forgotten to update your bootloader and modem and that's why it isn't booting up.
Click to expand...
Click to collapse
Yes thanks....os was wiped....back to stock and re-rooted....

I bricked my tablet by wiping out the internal storage and I have no backup

well the title explains almost everything...
Device:SM-T230 or samsung galaxy tab 4 7.0
odin don´t recognize
did you do basic wipe /system? it wipes recovery too.... does tablet boot to download mode after saying system not found? if it does reinstall drivers and odin should detect it
thelous said:
did you do basic wipe /system? it wipes recovery too.... does tablet boot to download mode after saying system not found? if it does reinstall drivers and odin should detect it
Click to expand...
Click to collapse
I solve Odin , I can use Odin If needed
I can boot until Samsung logo
I did in twrp a "format data"
luc4s309 said:
I solve Odin , I can use Odin If needed
I can boot until Samsung logo
I did in twrp a "format data"
Click to expand...
Click to collapse
then you should use twrp to flash lastest backup
thelous said:
then you should use twrp to flash lastest backup
Click to expand...
Click to collapse
That is the problem ,I don't have a backup
Then install new Rom or original firmeware through Fastboot and Odin

Help dev!! Urgent

I got this message E: couldn't load bitmap fill_ball(error-7)
I got notif after flash stock rom via twrp, i was did wipe cache partition dan wipe data but still the same
I did flash twrp from cmd, success but in twrp still stock recovery
Pls help guys, im so confuse
capscorn said:
I got this message E: couldn't load bitmap fill_ball(error-7)
I got notif after flash stock rom via twrp, i was did wipe cache partition dan wipe data but still the same
I did flash twrp from cmd, success but in twrp still stock recovery
Pls help guys, im so confuse
Click to expand...
Click to collapse
Hi. Did you solved this issue? I have the same problem with my Zenfome Max Pro M1. I've tried all the available twrp images from the thread with the same result. Because of this I cannot install Magisk as I cannot disable the signature check..
.
tdanro said:
Hi. Did you solved this issue? I have the same problem with my Zenfome Max Pro M1. I've tried all the available twrp images from the thread with the same result. Because of this I cannot install Magisk as I cannot disable the signature check..
Click to expand...
Click to collapse
dis it get resolved? cuz i'm facing the same issue
Abhinav sekharamantri said:
dis it get resolved? cuz i'm facing the same issue
Click to expand...
Click to collapse
I think you need to flash Decrypt.zip after TWRP

Categories

Resources