Database Users

[Q] Bricked tpt

I am a new user, and I would like to get some help with my Lenovo thinkpad tablet 1838-22f. 16g US
I tried to install CWM using this guys method:
http://forum.xda-developers.com/showthread.php?t=1831161
Now, after doing a factory reset from settings page, I cannot boot into recovery.
It shows that it's trying to go into boot recovery image, like it should, then it just shuts down and does it again.
I tried a hard reset, same thing.
I'm stuck guys, any help? :crying:

so now it does not boot?
you managed to install CWM or not.did you get any errors?
can you use adb now?
can you try to flash the original recovery?

Phone "bricked"? Unable to detect phone via adb, or go to recovery. Suggestions?

Phone "bricked"? Unable to detect phone via adb, or go to recovery. Suggestions?
Hi,
I was trying to sideload the new MM update over adb. Somehow it got stuck at 49%. So, I rebooted my phone and tried again. MM update was getting stuck at 49% every time.
So, I tried to reboot to recovery to install the update from there. But now, my phone is not going to recovery mode. It just shows me 4 options (Reboot, Install update, Wipe data, Power off). And install update does not allow me to select sd card, so I cant even choose the update.
When I try to boot normally, it just shows the first screen (Lenovo in white, with "powered by android" at the bottom).
I tried connecting to PC, but my phone is not detected by that K3 Note manager tool, or by Pda.net tool. So, I am not sure, what I can even do next.

Solved the problem. Had to flash the whole thing again using SP flash tools and old stock roms. Newer rom was not working for some reason.
Finally on 6.0. Sadly, lost all my settings.

Hey bro tell me how to flash the MM STOCK ROM I got stuck at 49% it shows install failed & gives only option for BACK & when I does the same It goes to Main Recovery screen. I don't know what to do even. Help me please

I basically ended up flashing the full thing from the beginning. See the attached text file for the steps I followed. Finding the tools is easy, just type the tool name on google.
Tools needed:
mt65xx drivers
SP flash tool
Stock rom (only the chinese version has full rom, so you have to download that rom).
After that, you can update the stock rom to marshmallow using the recovery.

Lenovo k3 note bricked. Unable to detect it via pc , On a bootloop , SP flash tool
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem?

Got my Lenovo A1000 stuck on a boot loop with no access to recovery

Hi. Basically, i tried flashing TWRP via Flashify and apparently something went wrong because i couldn't go into recovery from that point on (i think i've tried every combination known to mankind, unless there's a really special one that i'm missing). The problem is, that like a complete idiot, i tried flashing CyanogenMod 12.1 from Flashify as well.
As you'd expect, it didn't go too well and now i've got no access to the phone. It can't get past the logo screen and won't boot into recovery either. Is there anything that can be done via PC i guess? Thanks in advance

I root my phone and install twrp for installing cm13.1 on my Lenovo a1000 after wipeing and installing cm and when it boot up its boot screen showing "Samsung galaxy grand prime " at first I thing it was normal I wait 5 hour but it is stuck at boot screen and I also can't access twrp recovery
iam a complete fool now I am screwed I don't know what to do. If you know any method to solve this plz help me .......... thanks in advance

Stuck in a boot loop and can't access recovery mode

So I flashed a custom rom and it required a specific TWRP recovery. But after installing the custom rom I had to install another TWRP recovery otherwise it wouldn't boot into OS (this recovery was probably unsupported and thus my phone was forced to boot into OS)
So every time I wanted to boot into recovery mode I had to use an app like flashify and flash the first recovery to boot into recovery mode. And after finishing I had to flash the "unsupported" recovery again in order to boot into OS.
Now with the "unsupported" recovery, I installed Xposed and some modules and then restarted the device. And..........boom! The phone is stuck in a boot loop! And I can't even boot into recovery mode.
Now here's the other nightmares I'm getting:
1. Cant use ADB to flash a new recovery because my device is "unauthorized" and in order to fix that I need to go to developers option which is not possible (because of boot loop)
2. Uninstall Xposed: button combinations aren't working and I cant go to recovery mode to flash the uninstaller zip
3. vol up + vol down + power button doesn't open recovery because the recovery is "unsupported"
4. Can't even boot to fastboot mode by holding vol down + power. It tries to boot into OS and starts boot looping
5. Can't use sp flash tool to flash stock rom or recovery because whenever I connect the phone to PC, the phone tries to boot into OS and....you guessed it starts boot looping.
Now I'm out of ideas and really depressed. If anyone can help me out with this I'll be grateful forever.
My device is: Lenovo k4 note
Chipset: MediaTek MT6753
Currently on this recovery: https://androidfilehost.com/?fid=673368273298981920
Got this recovery from here (recovery2): https://forum.xda-developers.com/k4-note/development/unofficial-resurrection-remix-5-8-2-t3570195
Thanks!

Update: The problem is solved after flashing stock rom via sp flash tool

Can you please help me im havifng the same problem
scarecow47 said:
Update: The problem is solved after flashing stock rom via sp flash tool
Click to expand...
Click to collapse
I think the pc cant dtect my device same problem bro after installing new rom it keeps on rebooting after the lenovo logo. Cant also access the recovery mode. Please help me

Bro I'm not an expert. Someone from XDA discord server helped me with this. And I actually forgot the exact thing I did to be honest. I downloaded the sp flash tool on pc and downloaded the stock rom. Then flashed it to the phone. You have to connect your device via USB before. For a detailed guide you can search on YouTube with something like "how to flash stock rom via sp flash tool"
Or ask in the discord server. They will surely help you.

How did you flash that? Can you please explain step by step

Check this link: https://firmwarefile.com/lenovo-k4-note-a7010a48
You can download the stock rom from here. And there is also a tutorial on how to flash it. I followed it. Hope that helps!

scarecow47 said:
Check this link: https://firmwarefile.com/lenovo-k4-note-a7010a48
You can download the stock rom from here. And there is also a tutorial on how to flash it. I followed it. Hope that helps!
Click to expand...
Click to collapse
Thanks, the problem is my phone is struck on the Lenovo logo, it's not turning off but my computer deducted it as Lenovo device

If ADB can detect your device then you can just flash a new recovery and you should be fine. But as I said I'm not an expert so I'd suggest you to ask for help on the XDA discord server. That's where I got help from.

Did anyone found the solution?
Thanks

Can any one find the solution of that problem , because my lenovo k4 note also stuck on boot looping logo... and vibrate like bootup time

M30s bricked, how to unbrick it?

My m30s run Anroid 10 firrmware M307FXXU3BTG1
It rooted and install Recovery 3.4.0.0
When I reboot, It stuck bootloop, cant get into Download mod or Recovery anyway.
When I try get into Download mod it reboot right when I press Vol up button.
Video
https://youtu.be/Gh8ZL2zbUBI

@thanhchaua6 Watch this video for unbricking your phone Unbrick https://youtu.be/xRSjsDp-Siw that is complete guide situation

Hi. I have followed the above video's instructions and the problem is still not resolved. It is still stuck on boot logo. No boot loop. Just won't go ahead of the start up logo. I cannot figure out the problem. I have downloaded the latest firmware using Frija and flashed it successfully using ODIN. It still does not work. After trying the standard solution multiple times, I did a NAND erase and re-partition using ODIN and flashed the firmware successfully, still facing the same issue. Please help, I am desperate.

Hi,
Followed the instructions. nothing happened.