Hello,
I was trying to install GCam on my Xiaomi MI A1 with the last August patch and I don't know if it's a coincidence but my phone didn't want to turn on afterwards, it turns on only with the charger connected, if you disconnect the charger turns off instantly. I thought it was a software problem and my phone was bricked so I installed Android 7 with the MiFlash tool and I couldn't turn it on either, then I tried updating Oreo with MiFlash using another fastboot image and nothing, after trying all this thinking it was a software problem, my phone is still in a kind of bootloop where it just presents the "Mi" logo and restarts again and again unless it is connected to the power.
A friend also has a Mi A1 so I put his battery in my phone and turned on, so it's a hardware problem, apparently the battery, I searched the internet and I couldn't get an original, could you help me with a link?
https://www.aliexpress.com/item/TMI...icker-For-Xiaomi-Mi-A1-Redmi/32844201974.html
Related
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
undulus said:
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
Click to expand...
Click to collapse
Hi, open ur phone again and check the display connector, try fully disconnecting it and reconnecting it and check if all other connectors in range are also properly connected. Then reassemble ur phone.
Next time, do not open your phone unless you really have to. I don't see why you have opened to reset it. You can press power for very long then after maybe 30 seconds or so, your phone will fully turn off. No need to open it for that.
Next time if you have a question, use the Q&A section, not this one. You'll get answers quicker there too.
Bricked or screen is broken
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
undulus said:
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
Click to expand...
Click to collapse
if that worked, i'd be curious to know
When I connect my Redmi phone to the charger I just se mi logo flashing again and again I tried to fastboot the ROM and it was done successfully but still problem persists. Whenever I turn on my phone there is just only mi logo nothing else.
which flashing tool or fast boot firmware you using? and have you tried flashing wihout simcards? happend once with me, give me some details and hopefully we can find a solution.
Hello, I bought a xiaomi mi 9T. After unlocking the Bootloader and trying to flash it, my phone doesn't turn on anymore, and I don't have access to fastboot mode or recovery mode. And I would like to fix it.
That's a hardware problem with main board for 99%
Try different cable and charger
I try with all cables that I have but nothing happened! I most change motherboard?
Hey guys! I made a newbie mistake by not using mi flash tool and use manual flashing using sdk fastboot and i dont know what mistake i did but im pretty sure i did something wrong. Bootloader is already unlocked and i have root access already. Right after i flashed a magisk patched boot file to give root access and booted it up. The wifi wasnt working and tried to flash a stock rom again hoping it will fix the wifi not turning on problem, but unfortunately i think i flashed wrong rom or something and it basically bricked. Cant boot to recovery nor fastboot. but mi flashtool and QFIL can detect it. Tried flashing stock rom that i downloaded from official website and Mi flash tool will always fail at authentication and it says "only nop and sig tag can be received before authentication" and other different errors like resdump(etc. cause i dont understand. I tried QFIL using test points i found on google. and it will say Sahara fail or sometimes "firehose fail fhloader fail the system cannot find the file specified". Im not really good at this and really regretting rooting it. I cant give it to Xiaomi Phone centers because i bought it from overseas and there are no xiaomi phone centers in my country.
Can someone with a kind heart help me with this problem? Thank you very much.
Hello! Sorry to say this, but it is pretty much dead. You are in EDL mode, which Xiaomi locked out and you need to have an authorized service account to unbrick it through Mi Flash. A free way to do this would have been to find a patched programmer file, but it doesn't exist yet. I recommend you to ask every phone service in your city if they have an authorized service account or if they have USB Dongles (like Miracle Box or Hydra) for unbricking.
Theres no other choice.. only service center could handle it..
TheAlmigthyOne said:
Hello! Sorry to say this, but it is pretty much dead. You are in EDL mode, which Xiaomi locked out and you need to have an authorized service account to unbrick it through Mi Flash. A free way to do this would have been to find a patched programmer file, but it doesn't exist yet. I recommend you to ask every phone service in your city if they have an authorized service account or if they have USB Dongles (like Miracle Box or Hydra) for unbricking.
Click to expand...
Click to collapse
You
TheAlmigthyOne said:
Hello! Sorry to say this, but it is pretty much dead. You are in EDL mode, which Xiaomi locked out and you need to have an authorized service account to unbrick it through Mi Flash. A free way to do this would have been to find a patched programmer file, but it doesn't exist yet. I recommend you to ask every phone service in your city if they have an authorized service account or if they have USB Dongles (like Miracle Box or Hydra) for unbricking.
Click to expand...
Click to collapse
It can be fixed using heat its not totally dead I've done this temporary solution many times on my POCO
I fixed mine using THIS but just temporary solution there is no permanent solution at the moment,
Darkvintage09 said:
I fixed mine using THIS but just temporary solution there is no permanent solution at the moment,
Click to expand...
Click to collapse
i used thqt qnd still not fix it
Yeh at least we can still use it just to get the device booting up
What do you mean temporary solution?
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
bjsalcedo10 said:
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
Click to expand...
Click to collapse
Wonderful!!!! it really works on my Redmi 9T...cheers
Hello thank you it's work
I managed to turn my poco m3 back on which was in edl. can i restart without worrying that i'm still in edl? Do you know? thank you
totodu13190 said:
Hello thank you it's work
I managed to turn my poco m3 back on which was in edl. can i restart without worrying that i'm still in edl? Do you know? thank you
Click to expand...
Click to collapse
No, same will happen again. It was issue with my Poco M3 too.
Don't restart, recover your data to PC or other mobile. It's a firmware to motherboard issue. Same happened with me, the set was in warranty, I took it to warranty service centre and they replaced motherboard Free of cost, now it's working fine
For all those friends having Poco M3 and having brick issue. Battery drains in 5-7 days. Attempt restart, if successful, recover your data to PC or other mobile. It's a firmware to motherboard issue. Same happened with me, the set was in warranty, I took it to warranty service centre and they replaced motherboard Free of cost, now it's working fine
Asif9 said:
For all those friends having Poco M3 and having brick issue. Battery drains in 5-7 days. Attempt restart, if successful, recover your data to PC or other mobile. It's a firmware to motherboard issue. Same happened with me, the set was in warranty, I took it to warranty service centre and they replaced motherboard Free of cost, now it's working fine
Click to expand...
Click to collapse
For how much time does it work ? Is it a permanent fix ? The service center did the same for my Poco M3 (replacing motherboard) but I'm afraid it will go deadboot again one day.
Darkvintage09 said:
I fixed mine using THIS but just temporary solution there is no permanent solution at the moment,
Click to expand...
Click to collapse
Can you explain how to managed to fix it?
https://forum.xda-developers.com/t/poco-m3-does-not-turn-on-anymore.4286783/post-85692315
https://forum.xda-developers.com/t/...no-fastboot-no-recovery.4363681/post-86748309
Lingatsu said:
For how much time does it work ? Is it a permanent fix ? The service center did the same for my Poco M3 (replacing motherboard) but I'm afraid it will go deadboot again one day.
Click to expand...
Click to collapse
After service centre motherboard replacement the set is working fine, it has updated Miui to 12.5 too. No more issues.
Asif9 said:
After service centre motherboard replacement the set is working fine, it has updated Miui to 12.5 too. No more issues.
Click to expand...
Click to collapse
It's been more than six months after replacement motherboard.
bjsalcedo10 said:
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
Click to expand...
Click to collapse
How do I understand that it is ready to be connected to the battery charger? low battery icon will appear on the smartphone screen? thank you
It's already solved in this thread, you have to go back and find it.
[SOLVED*] POCO M3 stuck in EDL (No Fastboot, No Recovery)
―――――――――――――――――――――――――――― My Case | The Beginning (November 18, 2021): ―――――――――――――――――――――――――――― A while ago I unlocked Bootloader from my POCO M3 European [EU] [citrus] and downgraded MIUI (12.5.2.0 to 12.0.3.0) because the update had...
forum.xda-developers.com
So earlier, I unlocked my Redmi 9T phone using the Xiaomi Official Tool, then flashed TWRP using XiaoMiTool V2, I opened cmd and entered fastboot reboot recovery, it's still in fastboot mode, I tried Power button + volume buttons and still stuck on fastboot and before it boots into fastboot again, it shows a charging battery icon. I plugged in my phone to my pc and selected "My phone is bricked" in XiaoMiTool V2 and waited for 1 hour to finish the download, it tries to install but when it gave me an error, I closed it and tried to reboot my phone, NOW IT'S SHOWING A CHARGING BATTERY ICON AND CAN'T DO ANYTHING! I keep turning on my phone but it only shows the battery and turns itself off quick. PC/ADB can't detect any, can't boot into fastboot, can't boot into system, can't boot into recovery. Please help me, I'm gonna get in BIG trouble. Please help me... Thanks!
Schon Villamor said:
So earlier, I unlocked my Redmi 9T phone using the Xiaomi Official Tool, then flashed TWRP using XiaoMiTool V2, I opened cmd and entered fastboot reboot recovery, it's still in fastboot mode, I tried Power button + volume buttons and still stuck on fastboot and before it boots into fastboot again, it shows a charging battery icon. I plugged in my phone to my pc and selected "My phone is bricked" in XiaoMiTool V2 and waited for 1 hour to finish the download, it tries to install but when it gave me an error, I closed it and tried to reboot my phone, NOW IT'S SHOWING A CHARGING BATTERY ICON AND CAN'T DO ANYTHING! I keep turning on my phone but it only shows the battery and turns itself off quick. PC/ADB can't detect any, can't boot into fastboot, can't boot into system, can't boot into recovery. Please help me, I'm gonna get in BIG trouble. Please help me... Thanks!
Click to expand...
Click to collapse
You have missed the subforum:
This is here for Mi 9T /Redmi K20
You are asking about Redmi 9T
That's totally different name, phone model, hardware, Android version.
After all, your phone model is about two years newer than our Mi 9T here
Specially you made a big mistake if you maybe downloaded and flashed the TWRP for Mi 9T/Redmi K20 to your Redmi 9T, and bricked your phone
One needs to be careful about the phone models!!!
zgfg said:
You have missed the subforum:
This is here for Mi 9T /Redmi K20
You are asking about Redmi 9T
That's totally different name, phone model, hardware, Android version.
After all, your phone model is about two years newer than our Mi 9T here
Specially you made a big mistake if you maybe downloaded and flashed the TWRP for Mi 9T/Redmi K20 to your Redmi 9T, and bricked your phone
One needs to be careful about the phone models!!!
Click to expand...
Click to collapse
I apologize, I did not know that they're different, but how can I fix this?
Schon Villamor said:
I apologize, I did not know that they're different, but how can I fix this?
Click to expand...
Click to collapse
Generally, you should be able to fix by flashing the stock firmware via MiFlash again
But if you also locked your Bootloader by using the MiFlash last time, you will not be able to flash anything and you will need to seek around for the paid EDL support
Better ask on the XDA (sub)forum for your Redmi 9T:
Redmi 9 Power / 9T
The Redmi 9 Power is a 6.53" phone with a 1080x2340p resolution display. The Qualcomm SM6115 Snapdragon 662 chipset is paired with 4GB of RAM and 65/128GB of storage. The main camera is 48+8+2+2MP and the selfie camera is 8MP. The battery has a 6000mAh capacity.
forum.xda-developers.com
zgfg said:
zgfg said:
Generally, you should be able to fix by flashing the stock firmware via m
zgfg said:
Generally, you should be able to fix by flashing the stock firmware via MiFlash again
But if you also locked your Bootloader by using the MiFlash last time, you will not be able to flash anything and you will need to seek around for the paid EDL support
Better ask on the XDA (sub)forum for your Redmi 9T:
Redmi 9 Power / 9T
The Redmi 9 Power is a 6.53" phone with a 1080x2340p resolution display. The Qualcomm SM6115 Snapdragon 662 chipset is paired with 4GB of RAM and 65/128GB of storage. The main camera is 48+8+2+2MP and the selfie camera is 8MP. The battery has a 6000mAh capacity.
forum.xda-developers.com
Click to expand...
Click to collapse
How can I flash when my phone can't boot into fastboot? Can't boot into anything, it just shows the battery charge screen when I turn it on (even without plugging it in a charger). I have my bootloader unlocked
Click to expand...
Click to collapse
Click to expand...
Click to collapse
But you can ask in the right XDA subforum for your phone - where somebody familiar with your device could help you, or you cannot (or you don't want)?!
If you hard bricked your phone then you will need to find somebody to help you with the paid EDL account - usually they cannot advertise on XDA since advertising the paid support is forbidden. You should seek around on TG channels and so
That was the last my answer for you. Cannot help you better for your different phone. Good luck