Hello everyone,
With the recent update of Google's security patches for November, most custom ROMs won't boot anymore when Xposed modules are installed.
This problem seems related to a whitlelist, which makes it impossible for Xposed to activate modules and results in a endless bootloop.
So at the moment, there are (only) two solutions:
Downgrade to an older build (recommended: before November)
Or just wait until @rovo89 found a solution and updated Xposed
But for everyone else who don't have time to wait, I have found a solution: Just replace libandroid_runtime.so with the one from former builds.
So I've made a flashable zip with lib files from a previous build which was working with Xposed fine (I've used cm-13.0-20161102-NIGHTLY-kenzo) for arm64 devices and it seems to work fine
Before flashing please make a backup of /system/lib/libandroid_runtime.so and /system/lib64/libandroid_runtime.so, I am not taking any responsibility for soft-bricked devices
Instructions:
Download flashable zip file
Reboot to recovery
Flash xposed-v86-bootloopfix-sdk23-arm64.zip
Reboot!
Now your phone should be able to boot back without getting a bootloop :fingers-crossed:
Thanks a lot for this solution to @aviraxp on GitHub!
Download: bit[dot]ly[slash]2g7DXoE
Yes, It saved my phone after flashing this new version of Xposed.
pudup said:
Here's a an xposed update that you can try and see if it fixes the problem.
http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v87-sdk23-arm64-test1.zip
Click to expand...
Click to collapse
pudup said:
Here's a an xposed update that you can try and see if it fixes the problem.
http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v87-sdk23-arm64-test1.zip
Click to expand...
Click to collapse
link not working plz proved correct magisk xposed framwork for redmi 3s prime
****Disclaimer**** I am not responsible for any damage to your device. Please take full backup of device before flashing Xposed or any modules. Please flash at your own risk.
Updates:
Update 12 (19/01): Xposed for Oreo (8.0 & 8.1) updated to v90-beta2. Remember that the first boot will take several minutes. Links available in Downloads Section
As per @rovo89:
There's a new Xposed Installer v3.1.5 available in the first post now. It fixes two crashes and provides two new features:
Fixed a crash in download list search on Oreo.
Fixed a crash when sending log on Oreo.
"Optimize apps now" menu item, will trigger "cmd package bg-dexopt-job". It's available since Oreo and will start the job that usually runs once per night if the device is charging. If you feel degraded performance after installing Xposed, it might be because all apps are running purely on JIT and interpreter. That's because Xposed needs additional information to identify methods it has to invalidate, and that information will be determined during the next compilation. If you want that to happen now, use this new feature. It took about 20 minutes on my Pixel. For more background, see https://source.android.com/devices/t...k/jit-compiler.
Detection if Verified Boot (dm-verity) is active. If yes, any changes to the system partition will be detected and you'll end up in a boot loop. The detection might not be 100% perfect yet, so if you notice false positives or negatives, please report a bug along with the output of "adb shell getprop".
I'm also publishing v90-beta2 and uninstaller 20180117, available via Xposed Installer and http://dl-xda.xposed.info/framework/. Remember that the first boot will take several minutes.
They support (un)installing Xposed via TWRP on Pixel and probably other "system root image" devices (where the system partition is mounted the root directory and /system is just a subdirectory). Also, the previous uninstaller had a typo, which probably led to boot loops on all devices. Please always use the latest uninstaller!
Click to expand...
Click to collapse
Also, Unity installer by @ahrion updated to v89 r5:
Changelog:
v89 r5/v90 b1:
- Added xposed framework v90 beta 1 for oreo devices (use beta material xposed installer for v90)
- Updated to Unity v2.9
Update 1 (11/10): Official Xposed updated to v88.1 (available under same download links).
As per @rovo89
The first fixes have found their way into version 88.1, only available for Nougat. That includes especially some fixes for Samsung ROMs, but might also fix bootloops and slowdowns on other devices. Besides that, I think I fixed a MIUI incompatibility, not sure if it works now (and to be honest, I don't give much priority to MIUI). There are still unfixed issues on the queue, and again, please keep reporting whatever you find.
Click to expand...
Click to collapse
Update 2 (13/10): Systemless (Magisk) Xposed updated to v88.1 (Link available in Downloads Section & within Magisk Manager)
Update 3 (14/10): Unofficial Xposed 88.1 released for MIUI 9 [SDK24/25] (MIUI 7.9.21 and higher) (Link available in Downloads Section)
Update 4 (07/11): Official Xposed updated to v88.2 [SDK24/25] (Link available in Downloads Section)
Fixed a bootloop on some Samsung ROMs, expecially Note 8
Fixed a crash on OnePlus devices when 100% charged (hopefully, didn't get much feedback)
More MIUI compatibility. There's still an open issue though, try disabling resource hooks in the installer if you still get bootloops.
Try to detect outdated (and therefore incompatible) Xposed Installer.
Click to expand...
Click to collapse
Update 5 (16/11): Material Design Xposed Installer [31/10/17] by @DVDandroid (Working perfectly on both System and Systemless Xposed).
I've seen many reports that Xposed is installed, but not active. One of the reasons (on Nougat) could be that an old Xposed Installer is used. You really have to update Xposed Installer! Another reason was that the /data/user_de/0/de.robv.android.xposed.installer directory doesn't exist, which could be caused by installation on external storage. As this path is hardcoded across various places, only installation on internal storage will work.
The new Xposed Installer 3.1.4 (download in first post) checks for these situations and shows a warning with more steps to check. It also contains a new way for Xposed Framework ZIPs to specify that they need certain features in the installer (like using the new directory introduced in Nougat), to better prevent situations with outdated installers in the future. Please update the installer as well!
Click to expand...
Click to collapse
Update 6 (18/11): Added Xposed 87.1 (Modded) for MIUI 9 based on Marshmallow. Working for me on Official MIUI Beta Rom and MIUI Pro. Links available in Downloads Section.
Update 7 (18/11): Added Xposed Framework v88.2 r3 [UNITY]. This is the Xposed Framework compiled with the Unity Installer. Why is this different? This an all-in-one zip. Unity Installer auto-detects for SDK version, System or Magisk install, and uninstall. There's no need to have multiple zips for different scenarios. Link available in Downloads Section.
Update 8 (30/11): Unity Installer updated to v88.2 r5.
Changelog: -
v88.2 r5
- Updated to Unity/aml v2.4
v88.2r4:
- Updated to Unity/aml v2.3
- Updated boot script for magisk 14.5 support
v88.2 r3:
- Update Unity/aml v2.2
- Updated Material Xposed Installer 10/31/17
- Added wipe/uninstall @topjohnwu Magisk Xposed before install
v88.2 r1:
- Initial release
Click to expand...
Click to collapse
Major Update 9 (19/12): Xposed (System & Systemless) updated to v89 along with Unity Installer update to v88.2 r9. Inching towards Xposed for Oreo. Links available in Downloads Section
As per Developer: I know many of you are waiting for Oreo support, and indeed I'm pretty far with that. 95% of the code are ported, basic functionality is working on Genymotion. The remaining 5% are obviously those parts of the code which are more difficult to port. I literally just upgraded my primary device to Android 8.1, so I can hopefully start some real testing soon.
Nevertheless, I can announce another release right now: Xposed version v89. It's available for Android 5.0 to 7.1 and contains quite a few fixes for app crashes. I reported one of them to Google as I suspect it's a bug in the AOSP code. These crashes were hard to debug, that's why it took some time to fix them. These efforts also delayed my work on Oreo support, but they will also help to make the first Oreo version better right from the start.
Version v89 also includes a change in Xposed's process permissions, which should help on ROMs which reset app directory permissions on each reboot.
Click to expand...
Click to collapse
Update 10 (03/01/2018): Unity Installer updated to v89 r4.
Changelog: -
v89 r4
- Updated to Unity v2.8
v89 r3:
- Updated to Unity/aml v2.7
v89r2:
- Updated to Unity/aml v2.6
- Updated Xposed Installer app to 12/25 versions
v89:
- Updated xposed framework to v89
v88.2r6:
- Updated to Unity/aml v2.5
v88.2r5:
- Updated to Unity/aml v2.4
v88.2r4:
- Updated to Unity/aml v2.3
- Updated boot script for magisk 14.5 support
v88.2 r3:
- Update Unity/aml v2.2
- Updated Material Xposed Installer 10/31/17
- Added wipe/uninstall @topjohnwu Magisk Xposed before install
v88.2 r1:
- Initial release
Click to expand...
Click to collapse
Major Update 11 (08/01): Xposed for Oreo (8.0 & 8.1) is released in Beta phase. It is stable enough for daily use with a few App Crashes @rovo89 is still working and will update with stable build soon. Links available in Downloads Section
As per Developer:
It's stable enough for me to use it on my daily driver (Pixel), and @wanam tested it on a Pixel 2.
I'm aware of a few app crashes that happen from time to time, but nothing that would stop me from using the device. I'm still investigating the root causes for these crashes and plan to post another beta once I think I've fixed them.
Please only report reproducable bugs on GitHub for now, i.e. bootloops and apps that crash every time you use them. Random app crashes are hard to capture and might the same that I'm looking into already.
I'll post the source code once we leave the beta phase. It isn't cleaned up yet, especially the parts shared with older Android versions. I'm a fan a nice, linear commit history, and if I push the source now, I can't fix up those commits anymore.
Click to expand...
Click to collapse
Installation Procedure:
Step 1: Find your CPU’s Architecture
In this step, you need to find your phone’s CPU Architecture as Xposed Framework Installer comes in different installer files for different CPU Architecture.
Download this app Droid Hardware Info from play store.
Open it and go to system tab and look for CPU Architecture.
Here you should find the CPU Architecture for your phone ARM or ARM64 or x86.
Step 2: Download & Install Xposed Framework
If you have root access, simply download the Xposed Installer apk and Choose the zip. It will detect the Android version and CPU Architecture automatically & install the latest Official Xposed version.
Or you can download the proper zip from below links and flash it in recovery then Install the Xposed installer to use Xposed and download the modules.
If you face bootloop, flash lazy flasher or No verity zip or Disable the option verity from TWRP > Advanced > Disable Verity.
Installation procedure for Systemless Xposed (Magisk):
Install the Xposed Installer 3.1.4 Magisk from the link in the Downloads Section. Do NOT use the Official Xposed Installer as it does not show the Magisk Xposed as installed.
Follow the instructions in the Magisk release thread to install Magisk on to your device
Install Xposed within Magisk Manager's Download Section, and download the appropriate version. Or you can download the zip and flash in custom recovery
For uninstallation, remove the Xposed Magisk Module within Magisk Manager
Download:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Xposed Installer:
Xposed Installer 3.1.5
Official System Xposed:
Xposed Installer for Oreo 8.0 (SDK26)
Xposed Installer for Oreo 8.1 (SDK27)
Official Systemless Xposed by @topjohnwu:
Xposed Installer 3.1.5 Magisk
Oreo 8.0 - Systemless Xposed v90.1-sdk26-beta2 by @topjohnwu
Oreo 8.1 - Systemless Xposed v90.1-sdk27-beta2 by @topjohnwu
Xposed Uninstaller:
Xposed Uninstaller: http://dl-xda.xposed.info/framework/uninstaller/
If you need to uninstall, please use xposed-uninstaller-20180108-*.zip which cleans up some additional files. Otherwise, you'll probably end up in a bootloop.
Click to expand...
Click to collapse
Xposed Installer:
Xposed Installer 3.1.5
Material Design Xposed Installer:
Download
Link to the Thread
If you have installed the original version of the Xposed Installer, UNINSTALL IT before install this!!! This one is working perfectly on System and Systemless (Magisk) Xposed.
Xposed Framework v89 r5[UNITY] by @ahrion:
Download
Link to the Thread
Official System Xposed:
This will also work on MIUI 9.
Xposed Installer for Nougat 7.0 (SDK24)
Xposed Installer for Nougat 7.1 (SDK25)
Official Systemless Xposed:
Xposed Installer 3.1.5 Magisk
Systemless Xposed v89.2 by @topjohnwu
Unofficial MIUI 9:
Unofficial Xposed 88.1 (MIUI 9) @Psy_Man
MIUI 9 based on Marshmallow by @SolarWarez:
System: xposed-v87.1-sdk23-arm64--MIUI9-edition-by-SolarWarez-20170612
Systemless (Magisk): xposed-v87.1-sdk23-Magisk-MIUI9-edition-by-SolarWarez-20170612_mod+us3r
Xposed Uninstaller:
Xposed Uninstaller: http://dl-xda.xposed.info/framework/uninstaller/
Do NOT use inbuilt Xposed uninstaller as it caused bootloop for me. Use only attached uninstaller.
Click to expand...
Click to collapse
Xposed Bug Reporting:
Here's the how-to on reporting bugs: https://github.com/rovo89/XposedBridge/wiki/Bugs
To report bugs in Xposed, please include full logs from the device.
Video: @tkdsl
Xposed Modules currently working on Nougat
https://forum.xda-developers.com/xposed/unofficial-list-modules-nougat-xposed-t3639615/amp/
Xposed Modules currently working on Oreo
https://forum.xda-developers.com/xposed/xposed-modules-oreo-t3732819
Credits
@rovo89 for creating Xposed
@wanam for his modified Xposed to expand more compatibility with devices
@topjohnwu for Systemless Xposed Module
Looking for Xposed Modules? Check out our Xposed Framework Module subforum or download the XDA Labs application and browse our collection of Xposed Modules.
Xposed Modules Forum
Do you like the Xposed Framework? Consider donating to rovo89 for the awesome work that he does. If you think you have what it takes to contribute to the project, check out rovo89’s GitHub page below.
Donate to rovo89
Contribute to Xposed
Screenshots:
System Xposed:
View attachment 4297071 View attachment 4297072 View attachment 4297073 View attachment 4297074 View attachment 4297077 View attachment 4297078 View attachment 4297079
Systemless Xposed:
good news for android nougat users
Any one tried installing on rr 5.8.5
Reserved...
Anyone tried on ported miui 9 nougat rom for kendo?...
Please leave the status for the same...
Peace
Camlin3 said:
Any one tried installing on rr 5.8.5
Click to expand...
Click to collapse
Yes...I tried on RR in osprey...tested only 3 modules, xinsta, greenify and secure settings...xinsta is working..greenify is not getting active...
It working fine in nos
But in rr darknezz it say xposed is installed but not active i tried all possible methods nathing work in rr
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
vedhavyga said:
Yes...I tried on RR in osprey...tested only 3 modules, xinsta, greenify and secure settings...xinsta is working..greenify is not getting active...
Click to expand...
Click to collapse
Offical or darkness
And version of rom
For miui 9 version;;
Xposed Installed but not active. What does this means? Reinstalled but still same error. Any fix?
android_smater said:
It working fine in nos
But in rr darknezz it say xposed is installed but not active i tried all possible methods nathing work in rr
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
Offical or darkness
And version of rom
Click to expand...
Click to collapse
vynyth said:
Xposed Installed but not active. What does this means? Reinstalled but still same error. Any fix?
Click to expand...
Click to collapse
For this error, download the xposed installer 3.1.2 from OP, then flash xposed according to your Android version from OP. If that doesn't work, flash xposed directly from installer.
Guys, OP updated with installation guide and link to Official Systemless Xposed 88 (Magisk) for Nougat.
Installed on RR 5.8.4.
Installed powernap, adblocker reborn, youtube adaway and greenify, but greenify doesnt work, the other seems ok.
Anyone tested gravitybox on RR?
vedhavyga said:
Yes...I tried on RR in osprey...tested only 3 modules, xinsta, greenify and secure settings...xinsta is working..greenify is not getting active...
Click to expand...
Click to collapse
Try Greenify 3.7.1 beta from below link. It is said to be working with Xposd 88.
https://forum.xda-developers.com/showpost.php?p=74101567&postcount=323
strangelovee said:
Installed on RR 5.8.4.
Installed powernap, adblocker reborn, youtube adaway and greenify, but greenify doesnt work, the other seems ok.
Anyone tested gravitybox on RR?
Click to expand...
Click to collapse
Try Greenify from my previous post.
RR already has almost all features included in Gravity box.
Where's the gravity box N module, I'm unable to find it :silly:
VaibhavKumar07 said:
Where's the gravity box N module, I'm unable to find it :silly:
Click to expand...
Click to collapse
Here you go: Gravitybox v7.0.0 (Alpha) Nougat
Thanks to @C3C076
samrat_castle said:
Here you go: Gravitybox v7.0.0 (Alpha) Nougat
Thanks to @C3C076
Click to expand...
Click to collapse
Just switched to Lineage for stability & OTA support so it is mandatory for me to have xposed.
Nice thread bro try to include steps for Magisk users.
VaibhavKumar07 said:
Just switched to Lineage for stability & OTA support so it is mandatory for me to have xposed.
Nice thread bro try to include steps for Magisk users.
Click to expand...
Click to collapse
OP updated with Systemless Xposed info. I am currently facing some problems with Systemless installation as it is not showing in Xposed installer app even after it is installed in Magisk. As soon as I get a fix, I will update more info with screenshots.
Edit: Issue fixed with Systemless Xposed. OP Updated with info and Screenshots.
samrat_castle said:
OP updated with Systemless Xposed info. I am currently facing some problems with Systemless installation as it is not showing in Xposed installer app even after it is installed in Magisk. As soon as I get a fix, I will update more info with screenshots.
Edit: Issue fixed with Systemless Xposed. OP Updated with info and Screenshots.
Click to expand...
Click to collapse
Link for system less xposed plz
android_smater said:
Link for system less xposed plz
Click to expand...
Click to collapse
Read OP not comments
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
@samrat_castle Safetynet triggered even after installing systemless xposed, can you send ss
VaibhavKumar07 said:
Read OP not comments
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
@samrat_castle Safetynet triggered even after installing systemless xposed, can you send ss
Click to expand...
Click to collapse
As per topjohnwu, safety net is failing with all xposed versions. No workarounds.
Hi! I have problem with Snapchat. I have Custom ROM: MOKKE 7.1.2 and my problem is can't login to Snap. Can you help me?
#sryForMyEnglish (XD)
Unroot after snapchat login then again root.
I try it. Don't working.
Bump
If you have Xposed (which I'm pretty sure most Mokee ROMs are packed with), uninstall that and then do it.
I have posted the instructions here
1. Disable root (if enabled from developer options in CM or LOS based roms)
2. Install Latest Magisk 14.3 via TWRP
3. Install Latest Universal Safetynet fix v2 beta 5 Magisk module IMPORTANT STEP
4. Profit!
*MOD EDIT*
If we're going to post YouTube links for tutorials, please also post a text tutorial in the body of the post, and also make sure it's relevant to the topic of the thread. Thanks. =)
Hello everyone.
I have a Samsung Galaxy J5 SM-J500FN, on which TWRP recovery, and subsequently Magisk v17.1 have been successfully flashed.
Is there a flashable mod, or a Magisk module that allows the SMS-to-MMS conversion to be disabled?
:fingers-crossed:
I await your valuable replies.
Hello everyone.
Having successfully flashed Magisk v17.1 on a Samsung Galaxy J5 SM-J500FN, I would like to know if there is a mod or a Magisk module I can flash or install, on the device running stock firmware (Android 6.0.1 - Marshmallow), that will aid in disabling the SMS-to-MMS conversion?
:fingers-crossed:
As usual, I await your valuable replies.
YLNdroid said:
Hello everyone.
Having successfully flashed Magisk v17.1 on a Samsung Galaxy J5 SM-J500FN, I would like to know if there is a mod or a Magisk module I can flash or install, on the device running stock firmware (Android 6.0.1 - Marshmallow), that will aid in disabling the SMS-to-MMS conversion?
:fingers-crossed:
As usual, I await your valuable replies.
Click to expand...
Click to collapse
ok so you have magisk.
Next is to install xposed magisk module from here https://forum-xda--developers-com.c...errer=https://www.google.com&_tf=From %1$s
Then go into xposed and download and install this module https://repo.xposed.info/module/uk.co.villainrom.pulser.allowlongsms
That should do it
garylawwd said:
ok so you have magisk.
Next is to install xposed magisk module from here https://forum-xda--developers-com.c...errer=https://www.google.com&_tf=From %1$s
Then go into xposed and download and install this module https://repo.xposed.info/module/uk.co.villainrom.pulser.allowlongsms
That should do it
Click to expand...
Click to collapse
@garylawwd, thank you very much for the apt suggestion; I have installed the Xposed Framework version 87.1 by @wanam and subsequently the Disable SMS to MMS Conversion module by @pulser_g2, which appears as AllowLongSMS within the Modules section of the Xposed Installer 3.1.5 app.
:good:
However, using the stock Messaging app, when I compose a text message exceeding 4 SMSs, it gets converted to an MMS; how do I utilise the aforementioned module?
Pardon my naivety.