Related
Hello everybody!
I followed this instruction to root my Nexus 4. After complete the instruction and reboot the phone I got a message 'Unfortunately SuperSU has Stopped working' and to fix this issue I followed this instruction.
After that when I reboot again my nexus 4 stuck in lollipop boot animation and at this point bad news for me is that apparently usb debugging has been disabled because when I run 'adb devices' I don’t receive any device name.
Could anybody help me please to resolve it?
If u have twrp recovery go for factory reset from there or u can use adb sideload. Otherwise look for the unbrick toolkit.
Ps: Lollipop takes lot longer to fresh install, the animation seems to go on for ages (15-20) mins or so.
Since the phone has LP, I assume you flashed a custom ROM.
Just boot into TWRP, copy over a custom ROM, wipe system, data, cache, flash ROM, flash Gapps, reboot.
I have a US Oneplus2 that is stuck on the animation when it boots. I can get into TWRP and Fastboot, latest TWRP works and can also use an older version that I had.
I made a TWRP backup that I pulled off onto another computer. I then installed OOS 3.5.1 (I think) to do some testing. Once I was done testing, I decided I wanted the latest lineage as my backup was a 6 month old version of the latest at that time. I used TWRP to wipe the data, cache, and system to then install the latest Lineage 14.1 11/24/17 and gapps mini and micro (tested both). It gets to the lineage boot animation and the ball goes back and forth forever. I have left it over night and it's still going. I have rebooted the device, installed lineage several times, moved to 12/1/17 today with the same results.
After messing with it for hours and days, I decided to just put the TWRP backup back on the phone and then update from there. Well... my custom animation is load but the animation is also going forever.
Looking for some help on what might be wrong with the phone, thanks.
Make sure everything is formatted as ext4 and update firmware to 3.6.1 just to rule it out.
I would use the latest twrp.
I go to format tick all the boxes and clear everything then go to reboot > recovery. Once back in twrp copy the ROM and gapps across from pc install ROM and gapps together, wipe cache and dalvik reboot.
I'm in the process of doing that now.
The TWRP that I'm using is 3.1.1-0 which looks to be the latest. I am working with OOS 3.5.8 but will look at downloading 3.6.1. I am working to get Lineage 14.1 on there once everything is stable.
I ran into another weird is when using the qualcomm recovery tool:
My method is to enable ADB, enable OEM Unlock, enable Advanced Reboot.
Reboot into fastboot
Fastboot oem unlock: is successful
Fastboot reboot
I then go through renabling ADB and Advanced Reboot, OEM Unlock is still enabled.
I then reboot into fastboot
Fastboot flash recovery twrp-3.1.1-0-oneplus2.img
This completes successfully and then I fastboot reboot.
I have tried several times to get into TWRP but I keep getting the stock recovery.
I have tried to reflash recovery but nothing ever changes.
Is there possibly something wrong with the OEM unlock that says it was successful?
How do I go about troubleshooting this?
Ok, I fixed that and install OOS 3.6.1 and then was able to install TWRP 3.1.1-0.
I then wanted to install Lineage 14.1:
I then formatted Cache, System, Data, Dalvik... everything but internal. Should I wipe internal as well?
I copied over linage 14.1 and open_gapps for the same build micro.
I now am back to getting the Lineage Boot animation.
Thanks for helping since I'm trying to get Lineage to boot.
cyrus104 said:
Ok, I fixed that and install OOS 3.6.1 and then was able to install TWRP 3.1.1-0.
I then wanted to install Lineage 14.1:
I then formatted Cache, System, Data, Dalvik... everything but internal. Should I wipe internal as well?
I copied over linage 14.1 and open_gapps for the same build micro.
I now am back to getting the Lineage Boot animation.
Thanks for helping since I'm trying to get Lineage to boot.
Click to expand...
Click to collapse
Internal doesn't really matter to be honest, did you check they data and system are formatted as ext4.
It is in twrp advanced wipe options.
Did it ever boot ?
I did doubt check the data and system are formatted as ext4.
I let it sit for 3-4 hours and didn't see any progress.
Try a different rom. There are a lot of lineage based roms around.
I tried that and am getting the same results. Even if I flash a full TWRP backup from a time when I had it known to be working it happens.
I've tested this with 3 different roms now. My latest attempt has been to update TWRP to 3.2.1 and then install lineage 14.1 20171208. I also tested with Paranoid and Carbon because they were near the top of my list not because I know anything about them.
The phone just never gets past the boot animation. If I reboot to recovery is there a log I can pull to see what the issue is?
Thanks
Would like to see if anyone has any thoughts. If I run OOS I can use the phone but as of right now I can't use any other rom.
Is there any advanced fastboot or wipes that can be done to get it to boot. Is there any type of debugging that will show me what's happening when it tries to boot.
Just trying to bump this, I really need a way to debug this problem. Besides running OOS, I have a feeling this device is bricked and the mega unbrick guide doesn't work.
Also looks like if I try to put Kali on top of the base 3.5.8, the phone goes into the animation loop. So any change after OOS on the device puts it into an animation loop.
Is there a way the system or boot locked? Even thought I can TWRP anything onto the phone without errors.
Hey!
I've got the same issue it seems, phone just sticks to boot animation when flashing any other ROM than OOS 3.6.1.
Any update?
EDIT :
problem was with the persist.img
Flashed a different firm file and it was resolved
cyrus104 said:
I have a US Oneplus2 that is stuck on the animation when it boots. I can get into TWRP and Fastboot, latest TWRP works and can also use an older version that I had.
I made a TWRP backup that I pulled off onto another computer. I then installed OOS 3.5.1 (I think) to do some testing. Once I was done testing, I decided I wanted the latest lineage as my backup was a 6 month old version of the latest at that time. I used TWRP to wipe the data, cache, and system to then install the latest Lineage 14.1 11/24/17 and gapps mini and micro (tested both). It gets to the lineage boot animation and the ball goes back and forth forever. I have left it over night and it's still going. I have rebooted the device, installed lineage several times, moved to 12/1/17 today with the same results.
After messing with it for hours and days, I decided to just put the TWRP backup back on the phone and then update from there. Well... my custom animation is load but the animation is also going forever.
Looking for some help on what might be wrong with the phone, thanks.
Click to expand...
Click to collapse
OOS does not refuse to boot if a mountable partition is corrupt. This is not the case with lineage. If a mountable partition is corrupt and the corresponding fstab entry does not allow lineage to format and somehow mount it then init never proceeds
Try flashing this file: https://glassrom.botstack.host/firmware/oos-3.6.1-firmware-signed.zip and try again
Note that this file reboots the device after the flash is done so don't use twrp queue to flash this file. Flash this file last
---------- Post added at 17:45 ---------- Previous post was at 17:34 ----------
Alternatively this is a method I don't recommend to beginners because they accidentally give twrp logs to devs without realising it
You can get logs by making the forcing the device to "crash" through the power button
Here's how it's done: you boot the non-booting ROM and wait for about a minute. Then press power + volume down while it's on the bootanimation. You have to hold it until you see the oneplus logo and boot to twrp
TWRP's kernel will recover the last booted kernel's log from ram and place it in /sys/fs/pstore
First you have to open the log yourself to check if it's valid. The file is console-ramoops-0. All other log files in that location are invalid for your specific issue
Now for an ordinary user this is hard. They can't tell if the log is a recovery log or a ROM log. Since we're dealing with official lineageos we assume selinux would be enforcing
You want to search for this string "permissive=1". On Linux just do cat console-ramoops-0 | grep "audit" (quotes are part of the command)
If you're on windows then you can download Linux and get the logs. Stop bothering me
If you see the string "permissive=1" in the log you have accidentally fetched a recovery log
Go back and boot again and wait for about a minute if selinux is permissive
The string should read
"permissive=0"
That means selinux is enforcing and this is indeed a ROM log
Send this log here
Hello,
Was this problem ever solved? I am experiencing the very same thing with every single ROM i have tried so far. TWRP is installed, I can install all ROMS but when I try to boot the phone, it just won't get passed the booting animation.
Thank you
I'm having a very difficult time getting this phone setup. I can get very, very close... but then it starts boot looping into recovery.
So starting at the beginning, here is what I did:
- Booted up phone, make sure it works and connects to wifi (I find out later that it got encrypted, even though I didn't set a PIN).
- Inside the OS on first boot, I install and use the official bootloader unlock APK from Asus.
- Rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the Oreo modem, current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After many attempts to decrypt (and a lot of help from the forum), I successfully restore the phone to "WW_ZE552KL_14.2020.1712.85_M3.10.47.15_Phone-user.raw.zip" with the Asus tool.
- Phone is fixed and booting again to the OS, but I'm back to square one.
Second attempt:
- Thinking I need to flash the raw Oreo ROM (instead of just the Oreo modem), I use the Asus tool to flash "WW_ZE552KL_15.0410.1803.55_M3.10.47.19_Phone-user.raw.zip"
- The phone works fine and is now an Oreo ROM with an Oreo modem
- It's still unlocked, so I rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After the reboot, it goes to TWRP... whether I just let it boot on its own, or press power when it says: Start - Continue to boot >
What am I doing wrong?
You're having a rough go at this one eh.
I know we talked about this before, but did you try a factory reset and wiping cache/dalvik before rebooting?
Yes. As we discussed before, you can't wipe cache from TWRP. So I'd wipe dalvik from TWRP, then reboot to the bootloader to do a "fastboot format cache".
I'm going to try a different ROM later this afternoon. Maybe that will make a difference.
Flapjack said:
I'm going to try a different ROM later this afternoon. Maybe that will make a difference.
Click to expand...
Click to collapse
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.
junglesnake said:
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.
Click to expand...
Click to collapse
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.
BootloaderBoi said:
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.
Click to expand...
Click to collapse
many many thanks! I was able to get Ressurection Remix working by now
your steps were right, and I will detail them better to tell how I made it work for others reading this thread:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website.
1.2 - I also had to find a recent recovery.img, which I think I got it from here https://forum.xda-developers.com/zenfone-3/how-to/original-recovery-img-boot-img-zenfone-t3572188
1.3 - I used the stock recovery's adb sideload to flash the stock ROM
2) Flash TWRP - all good here
3) Flash ROM, Magisk, GApps
3.1 - I wiped system, data, cache and dalvik.
3.2 - I flashed RR ROM, GApps and Magisk (EDIT 2: install all three before the first custom ROM boot, or GApps won't work)
3.3 - Performed a Factory Reset
4) REBOOTED TO GLORY!
For what it seems, the stock ROM encryption that is performed on the stock's first boot was the enemy.
Now one last thing... In Security -> Encription, my device is NOT encrypted.
Do I run the risk of ruining everything if I encrypt it?
EDIT: No, it didn't break, working fine
junglesnake said:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website
Click to expand...
Click to collapse
lmao. His RAW firmware version is the latest version though
https://forum.xda-developers.com/zenfone-3/development/updated-unlock-relock-bootloader-t3749456
Anyways, enjoy your phone running on custom ROM :good:
I was using RR N since its beginnings and wanted to go back to stock, so I flashed NPJS25.93 through fastboot and everything was just fine. However, an update notification kept popping up but I wasn't able to update the device (when trying to update, after download finished it restarted, but process would fail). Given the annoyance of the notification and pop up screen, I decided to go back to RR N... I flashed TWRP3.2.1 64 bits (because I was waiting for a more stable 64 bits Oreo RR) and tried to flash RR N for the meantime... For my surprise, after clearing system, dalvik, data and cache partitions, flashing process wouldn't finish... the progress bar would keep the animation, but the actual progress would stop at about 6mm of the end of the bar (I estimate 90-95 %). I left the device for lie an hour but nothing... So I reflashed stock N through fastboot and tried all over again... The same thing happened three times...
After failing to flash RR N I just decided to stay on stock N, but wanted root, so I reflashed TWRP and flashed ElementalX kernel to later flash super su... However, to my surprise, ever since flashing TWRP, whenever I reboot my device, it boots into recovery, and in order to reboot into the rom, I must reboot into bootloader first and then select either QCOM or BP TOOLS (I know bp tools is for fixing baseband, but don't know what qcom does). I have now flashed latest 64 bits RR O (15/09/18) cause I still can't flash RR N, but the rebooting into recovery persists...
Any ideas on how I could fix this?
I had flashed first 32 bits RR O but I tried to flashed magisk after the first boot and due to the rebooting into recovery issue, magisk never became functional in the rom (I would open the app and it would remain in the mask screen until a message of "Magisk stopped working" showed up). Something similar happened with SuperSu, but this time, I would never get it installed.
Hi - so I unlocked my bootloader, installed TWRP no problem. However I boot into TWRP abd select ADB Sideload - but it will not load. Installed via OTA/USB instead - tried flashing Lineage and AICP - both start the boot process but never complete. Lineage boot me back to TWRP, AICP just stuck on loading screen. Tried cleaning cache etc etc still no dice. Any ideas anyone where Im going wrong....I was previously on the latest stock rom.
Fortunately I can still access TWRP and bootloader etc fine.
Thanks!
Voipboy01 said:
Hi - so I unlocked my bootloader, installed TWRP no problem. However I boot into TWRP abd select ADB Sideload - but it will not load. Installed via OTA/USB instead - tried flashing Lineage and AICP - both start the boot process but never complete. Lineage boot me back to TWRP, AICP just stuck on loading screen. Tried cleaning cache etc etc still no dice. Any ideas anyone where Im going wrong....I was previously on the latest stock rom.
Fortunately I can still access TWRP and bootloader etc fine.
Thanks!
Click to expand...
Click to collapse
You must be missing some steps before flashing, like "FORMAT" your data partition instead of just wiping it.
read the instructions more carefully next time