Related
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
You flashed the wrong one obviously. Which file did u flash?
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
You flashed the wrong one obviously. Which file did u flash?
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
This one
http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
That's the correct one. Only your baseband is different? Rest all works. In that case just flash fsg.bin and NON-HLOS.bin and wipe modem1 and modem2.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
That's the correct one. Only your baseband is different? Rest all works. In that case just flash fsg.bin and NON-HLOS.bin and wipe modem1 and modem2.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Tried flashing it. No success. Also the fiingerprint reader is also missing.
Even i have the same issue...FP sensor is not recognised during initial setup and also the setting is missing in the settings menu.
Flash the Indian modems doesn't work. Dailing *#06# shows only one IMEI number.Sim card is detected but always stays on No service mode....attempting to search for networks from setting results in an error.Service centre didn't accept my phone saying theres only one IMEI number and the bootloader is unlocked.Any help would be appreciated as we have no where to go.
GeeteshKhatavkar said:
Even i have the same issue...FP sensor is not recognised during initial setup and also the setting is missing in the settings menu.
Flash the Indian modems doesn't work. Dailing *#06# shows only one IMEI number.Sim card is detected but always stays on No service mode....attempting to search for networks from setting results in an error.Service centre didn't accept my phone saying theres only one IMEI number and the bootloader is unlocked.Any help would be appreciated as we have no where to go.
Click to expand...
Click to collapse
Glad that someone acknowledge the issue. There is one more guy here at xda roaming with the same problem. I've tried almost every method possible. Still no luck. But for luck, my service center guy offered a free board replacement for the problem. If xda guys didn help, I would send it for replacement. Mine is also bootloader unlocked and software status modified, but he is okey to offer a replacement.
sabithmk said:
Glad that someone acknowledge the issue. There is one more guy here at xda roaming with the same problem. I've tried almost every method possible. Still no luck. But for luck, my service center guy offered a free board replacement for the problem. If xda guys didn help, I would send it for replacement. Mine is also bootloader unlocked and software status modified, but he is okey to offer a replacement.
Click to expand...
Click to collapse
Which city ?I think you should go for the replacement and then update it via OTA when you get a notification.
Any Solutions Yet ?
Has anyone found any solutions yet !?
It is surely a Software issue
Service Center people are asking Rs.6500/- to replace the motherboard
Can't even relock the bootloader as i flashed the Nougat OTA and thus i can't downgrade the bootloader and lock it either !!
Please Help !
sabithmk said:
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
Click to expand...
Click to collapse
You found any solution?? I am facing the same problem...
bonnyshroff said:
You found any solution?? I am facing the same problem...
Click to expand...
Click to collapse
I sent it for service and got a free replacement.
bonnyshroff said:
You found any solution?? I am facing the same problem...
Click to expand...
Click to collapse
Yes I found it..
I created a thread. Check this.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
---------- Post added at 11:38 AM ---------- Previous post was at 11:36 AM ----------
sabithmk said:
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
Click to expand...
Click to collapse
Check this link friend. I did it. Was having same problem as you.
Check the thread I created.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
gioyocho said:
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
Click to expand...
Click to collapse
A few things:
1) As long as you are fully updated to the latest stock ROM, OTA updates should not be a problem. OTA updates are usually a problem if you have downgraded your device (like in your case downgrading to Dec 2016 firmware) or not having the full stock ROM, including the bootloader of the same patch level, (i.e. having mixed firmware) flashed to your device. If you really want to, you can use the latest stock ROM to re-lock your bootloader, and providing it's the correct stock ROM for your region/device, you should receive and be able to flash OTA updates without problem (as a locked bootloader will enforce you having firmware matching the bootloader update level).
2)I'm not sure how a minimal ADB/fastboot image is 900+ MB. Unless that mediafire link is pointing to the Android SDK which includes the ADB and fastboot programs, the minimal ADB/fastboot is about 1 MB https://forum.xda-developers.com/showthread.php?t=2317790
3)Unfortunately, repairing IMEI and loss of fingerprint sensor is not as straightforward as flashing the stock ROM. You may require the hw, fsg and modem images.
echo92 said:
A few things:
1) As long as you are fully updated to the latest stock ROM, OTA updates should not be a problem. OTA updates are usually a problem if you have downgraded your device (like in your case downgrading to Dec 2016 firmware) or not having the full stock ROM, including the bootloader of the same patch level, (i.e. having mixed firmware) flashed to your device. If you really want to, you can use the latest stock ROM to re-lock your bootloader, and providing it's the correct stock ROM for your region/device, you should receive and be able to flash OTA updates without problem (as a locked bootloader will enforce you having firmware matching the bootloader update level).
2)I'm not sure how a minimal ADB/fastboot image is 900+ MB. Unless that mediafire link is pointing to the Android SDK which includes the ADB and fastboot programs, the minimal ADB/fastboot is about 1 MB https://forum.xda-developers.com/showthread.php?t=2317790
3)Unfortunately, repairing IMEI and loss of fingerprint sensor is not as straightforward as flashing the stock ROM. You may require the hw, fsg and modem images.
Click to expand...
Click to collapse
Well
1. if you have unlocked bootloader, you can not re-lock. i think this is the brick's reason. i had installed yes old bootloader file with december 2016 security patch, then came ota update to april 2018 security patch and phone has bricked, as from marshmallow to nougat update while bootloader was unlocked. but i do not know reason exactly, because first time i did stock marshmallow 6.0 rom, then came ota update everything works fine new security patch of 6.0, after that came nougat ota update and phone was bricked
2. yes there is difference between .rar and folder. just extract it
3. if it is hardware issue, rom can not change anything yes
gioyocho said:
Well
1. if you have unlocked bootloader, you can not re-lock. i think this is the brick's reason. i had installed yes old bootloader file with december 2016 security patch, then came ota update to april 2018 security patch and phone has bricked, as from marshmallow to nougat update while bootloader was unlocked. but i do not know reason exactly, because first time i did stock marshmallow 6.0 rom, then came ota update everything works fine new security patch of 6.0, after that came nougat ota update and phone was bricked
2. yes there is difference between .rar and folder. just extract it
3. if it is hardware issue, rom can not change anything yes
Click to expand...
Click to collapse
1)You can re-lock your device with the April 2018 stock firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138. You need a stock firmware image as new or newer than your bootloader - we've seen many examples on this stock ROM thread of users re-locking their bootloaders.
The likely reason that you hard bricked is that you did not actually downgrade your bootloader when you flashed the Marshmallow stock ROM. Hence, you still had the Nougat bootloader on your device, which got corrupted when you used the old MM to Nougat OTA.
To re-lock your device, you must use the newest appropriate firmware for your device. Do not flash old stock firmware (including MM) and do not mix your firmwares (do not flash old bootloader files with new firmware). Of course, re-locking your bootloader will not restore your warranty and the process will erase your device, so up to you.
gioyocho said:
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
Click to expand...
Click to collapse
Check my link.
You can even OTA update in future if you installed the latest firmware.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
echo92 said:
1)You can re-lock your device with the April 2018 stock firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138. You need a stock firmware image as new or newer than your bootloader - we've seen many examples on this stock ROM thread of users re-locking their bootloaders.
The likely reason that you hard bricked is that you did not actually downgrade your bootloader when you flashed the Marshmallow stock ROM. Hence, you still had the Nougat bootloader on your device, which got corrupted when you used the old MM to Nougat OTA.
To re-lock your device, you must use the newest appropriate firmware for your device. Do not flash old stock firmware (including MM) and do not mix your firmwares (do not flash old bootloader files with new firmware). Of course, re-locking your bootloader will not restore your warranty and the process will erase your device, so up to you.
Click to expand...
Click to collapse
I do not know how to re-lock bootloader. i have latest stock rom 7.0 with april security patch
gioyocho said:
I do not know how to re-lock bootloader. i have latest stock rom 7.0 with april security patch
Click to expand...
Click to collapse
If you have a look and read of the stock ROM initial post https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 in that guide you'll see flashing commands that should let you re-lock your bootloader.
Also, if you want to re-lock your bootloader, check that you have OEM unlocking enabled in Settings>Developer Options (the same toggle you turned on when you unlocked the bootloader in the first place).
So the summary is:
1)Turn on OEM unlocking in Settings>Developer Options.
2)Boot your device to bootloader
3)Fully flash the April 2018 stock ROM (all files must be from the April 2018 stock ROM, no exceptions) as per the flashing commands in the guide, including all the OEM lock commands. This should wipe your device, re-lock your bootloader and let you boot with stock files. Attempting to mix files will cause your lock to fail or your device to not boot, as the firmware you flashed is now being checked by your bootloader to verify it's all from the same firmware.
echo92 said:
If you have a look and read of the stock ROM initial post https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 in that guide you'll see flashing commands that should let you re-lock your bootloader.
Also, if you want to re-lock your bootloader, check that you have OEM unlocking enabled in Settings>Developer Options (the same toggle you turned on when you unlocked the bootloader in the first place).
So the summary is:
1)Turn on OEM unlocking in Settings>Developer Options.
2)Boot your device to bootloader
3)Fully flash the April 2018 stock ROM (all files must be from the April 2018 stock ROM, no exceptions) as per the flashing commands in the guide, including all the OEM lock commands. This should wipe your device, re-lock your bootloader and let you boot with stock files. Attempting to mix files will cause your lock to fail or your device to not boot, as the firmware you flashed is now being checked by your bootloader to verify it's all from the same firmware.
Click to expand...
Click to collapse
well i tried and did not work those run commands
I am not responsible for your bricked phone or pigeon poo on your toupe. Do at your own risk.
Many thanks to @SupahCookie for idea and motivation!
INTENTIONALLY DOES --NOT-- LOCK BOOTLOADER!!!
Get factory images here:
https://forum.xda-developers.com/mo...ock-images-t3736767/post75236696#post75236696
THIS GUIDE IS FOR FACTORY/STOCK ROMs - NOT YOUR AVERAGE CUSTOM ROM which may not have bootloaders!!! (thanks!!!!! @echo92 )
FIX:
IF YOU ARE ABLE TO GET TO FASTBOOT THIS SHOULD WORK.
IF YOU HAVE 8.x bootloaders AND ARE DOWNGRADING TO 7, use "Alternative to RSDlite" below.
1 boot to win - 7 or 10 works fine.
2 boot phone to fastboot, and connect phone to computer.
3 start RSDlite
pick a ROM. I believe I used a 7.1.1 rom
3Nov9-ADDISON_NPNS26.118-22-2-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
RSDlite installed it and fixed the problem.
- -
I was then able to use RSDlite to install @rafikowy 's signed 8.0 . - going up from 7 to 8.
- -
- -
If you are on 8.x bootloaders and want to go to 7.x bootloaders, use this (RSDlite throws an error and stops):
ALTERNATIVE TO RSDlite:
1 I used 7zip to extract that 7.1.1 zip (or any ROM zip) into a folder x,
2 add all the adb and fastboot junk to folder x,
3 add the attached file (rename it to flash.bat) to folder x.
4 boot phone to fastboot and connect to computer.
5 click on flash.bat - it throws a lot of "slot" errors but works just fine.
6 reboot your phone if it hasn't already and go through the 7.x install stuffs.
7 you will not show an IMEI if you are coming from an 8.x bootloader. However, it IS there.
NOTE: you may need to add a line to the flash.bat if there are more/less sparsechunk's in your FACTORY/STOCK ROM...
THIS IS NOT FOR CUSTOM ROMs!!!!!!!
EDIT: 3-8-19: I just did this myself to go back very briefly to 7.1 - be sure you don't flash TWRP to it if your going to take OTAs - it will brick it. boot to TWRP if you need TWRP briefly: fastboot boot twrpimg.img
----------
If you can boot to fastboot screen, you can do anything.
Never OTA a ROM if you have modified recovery (TWRP, etc) or if magisk is present.
https://forum.xda-developers.com/mo...p-flashing-t3813498/post77011495#post77011495
I changed the attached file to add pause and reboot and exit to make it slightly more automated.
I have successfully used this many times going back and forth. If you can boot to fastboot screen, you can save your phone and flash anything you want.
You may wish to advise users that if they downgrade to Nougat not to use Nougat OTA updates. The reason being that a downgraded stock Oreo device may still have the Oreo bootloader on it. Thus, attempting to use Nougat OTA updates may hard brick their device (as the bootloader is likely corrupted, meaning no fastboot).
Users could either use the Feb 2018 NPN26.118-22-2-17 firmware from your link https://mirrors.lolinet.com/firmware/moto/addison/official/RETAIL/ as that was the last Nougat firmware (and thus no Nougat OTA updates) or avoid using OTA updates whilst downgraded.
echo92 said:
You may wish to advise users that if they downgrade to Nougat not to use Nougat OTA updates. The reason being that a downgraded stock Oreo device may still have the Oreo bootloader on it. Thus, attempting to use Nougat OTA updates may hard brick their device (as the bootloader is likely corrupted, meaning no fastboot).
Users could either use the Feb 2018 NPN26.118-22-2-17 firmware from your link https://mirrors.lolinet.com/firmware/moto/addison/official/RETAIL/ as that was the last Nougat firmware (and thus no Nougat OTA updates) or avoid using OTA updates whilst downgraded.
Click to expand...
Click to collapse
Interesting. I used the above GUIDE to go up and down a number of times on my phone (about 20 total) , installing and running on both 7 and 8, and then went down to a Nov 7.1.1 and let it ota all the way up to 8.0 and that is what I am using now. I found that when i used a factory zip, and the above procedure, it corrected the bootloaders to the appropriate version that i was flashing - either RSDlite or the more manual path which ignores the errors worked for me.
Using the above procedure , you get the correct bootloaders, which are in the zip.
Please correct me if i am wrong!
KrisM22 said:
Interesting. I used the above GUIDE to go up and down a number of times on my phone (about 20 total) , installing and running on both 7 and 8, and then went down to a Nov 7.1.1 and let it ota all the way up to 8.0 and that is what I am using now. I found that when i used a factory zip, and the above procedure, it corrected the bootloaders to the appropriate version that i was flashing - either RSDlite or the more manual path which ignores the errors worked for me.
Using the above procedure , you get the correct bootloaders, which are in the zip.
Please correct me if i am wrong!
Click to expand...
Click to collapse
That's intriguing - we saw previously on Z Play that users downgrading their stock firmware (e.g. https://forum.xda-developers.com/moto-z-play/help/hard-brick-moto-z-play-patch-abril-t3782927 )and then using OTA updates hard bricked their device (hence the number of users asking for a blankflash, as fastboot no longer works). I don't know if these users hard bricked by downgrading their firmware too far and then flashed an OTA radically different to their previous firmware, or whether it's a risk that's taken by any downgrading of firmware.
When you used fastboot, did you see any 'security downgrade errors' when you flashed the bootloader, and is your bootloader version now C180, as you've flashed the Oreo OTA?
echo92 said:
That's intriguing - we saw previously on Z Play that users downgrading their stock firmware (e.g. https://forum.xda-developers.com/moto-z-play/help/hard-brick-moto-z-play-patch-abril-t3782927 )and then using OTA updates hard bricked their device (hence the number of users asking for a blankflash, as fastboot no longer works). I don't know if these users hard bricked by downgrading their firmware too far and then flashed an OTA radically different to their previous firmware, or whether it's a risk that's taken by any downgrading of firmware.
When you used fastboot, did you see any 'security downgrade errors' when you flashed the bootloader, and is your bootloader version now C180, as you've flashed the Oreo OTA?
Click to expand...
Click to collapse
YES - that's why I wrote these 3 guides - before, it was quite possible to wind up with a bootloader mix - esp depending on the zip you use! - factory/stock only!!!
I added a line to the guide saying that it is only intended to be used for the factory/stock zips as these have (I believe) the bootloaders appropriate to the ROM.
Many thanks for pursuing this! - I wonder if we'll have to exclude certain ROMs that are in the factory lists?????
echo92 said:
That's intriguing - we saw previously on Z Play that users downgrading their stock firmware (e.g. https://forum.xda-developers.com/moto-z-play/help/hard-brick-moto-z-play-patch-abril-t3782927 )and then using OTA updates hard bricked their device
Click to expand...
Click to collapse
If you have TWRP (or I assume any custom recovery) present when you try to ota, it can download just fine and then reboot to the update. I had TWRP and wound up in a situation where my phone would only boot to twrp no matter what I flashed or restored. I booted phone to fastboot, RSDlite'ed that 11-09-17 factory zip and all was well. In that particular case I did not fully install 7.x but immediately RSDlite'ed rafikowy's 8.0 signed stock and went on with my testing. Since then I always boot to TWRP rather than intalling it and do my thing. (thanks @jceballos )
When you used fastboot, did you see any 'security downgrade errors' when you flashed the bootloader, and is your bootloader version now C180, as you've flashed the Oreo OTA?
Click to expand...
Click to collapse
Sorry - since it throws a million errors I never look at it if it works.
The particular build I am on at the moment - is BL: C1.82
This one started from that Nov '17 build and ota'ed all the way to 8.0 Apr.
I root and unroot as needed per rafikowy's method but using a boot to TWRP - never an install TWRP.
I'll put up a new guide ref ota and recovery and brick.
KrisM22 said:
If you have TWRP (or I assume any custom recovery) present when you try to ota, it can download just fine and then reboot to the update. I had TWRP and wound up in a situation where my phone would only boot to twrp no matter what I flashed or restored. I booted phone to fastboot, RSDlite'ed that 11-09-17 factory zip and all was well. In that particular case I did not fully install 7.x but immediately RSDlite'ed rafikowy's 8.0 signed stock and went on with my testing. Since then I always boot to TWRP rather than intalling it and do my thing. (thanks @jceballos )
Sorry - since it throws a million errors I never look at it if it works.
The particular build I am on at the moment - is BL: C1.82
This one started from that Nov '17 build and ota'ed all the way to 8.0 Apr.
I root and unroot as needed per rafikowy's method but using a boot to TWRP - never an install TWRP.
I'll put up a new guide ref ota and recovery and brick.
Click to expand...
Click to collapse
1) If you have TWRP, then using an OTA will fail - as you've not got stock recovery (and likely other modifications, including possibly a system partition set to read-write status). As you noted, having TWRP seems to cause a bootloop when rebooting - I'm not sure if the OTA sets a boot flag to stay in recovery until the update is completed. For the G4/Plus, there's a possible solution by wiping the misc partition but I don't know if there's a similar partition for Z Play devices: https://forum.xda-developers.com/moto-g4/help/troubleshooting-twrp-boot-loop-ota-t3714325
The only other solution I've seen is a clean flash of the stock ROM to get your device booting properly.
Booting to TWRP rather than flashing would mean your stock recovery is still present on your device. The only downside is if you need to make modifications, you'd need your computer to boot to TWRP.
2)BL C1.82 seems to be the bootloader provided by the Oreo April 2018 security patch update, so your device looks to be on the right bootloader. It's still curious that the Nov 2017 firmware worked whereas countless other 'factory' stock ROMs caused hard bricks when downgraded to and then OTA updates were installed.
As you mentioned, custom ROMs don't have bootloaders and thus don't care about your bootloader version usually (though I've seen some ROMs require a certain bootloader). However, stock ROMs and stock OTA updates do have bootloaders, which is why downgrading can be risky.
echo92 said:
1) If you have TWRP, then using an OTA will fail - as you've not got stock recovery (and likely other modifications, including possibly a system partition set to read-write status). As you noted, having TWRP seems to cause a bootloop when rebooting - I'm not sure if the OTA sets a boot flag to stay in recovery until the update is completed. For the G4/Plus, there's a possible solution by wiping the misc partition but I don't know if there's a similar partition for Z Play devices: https://forum.xda-developers.com/moto-g4/help/troubleshooting-twrp-boot-loop-ota-t3714325
The only other solution I've seen is a clean flash of the stock ROM to get your device booting properly.
Booting to TWRP rather than flashing would mean your stock recovery is still present on your device. The only downside is if you need to make modifications, you'd need your computer to boot to TWRP.
2)BL C1.82 seems to be the bootloader provided by the Oreo April 2018 security patch update, so your device looks to be on the right bootloader. It's still curious that the Nov 2017 firmware worked whereas countless other 'factory' stock ROMs caused hard bricks when downgraded to and then OTA updates were installed.
As you mentioned, custom ROMs don't have bootloaders and thus don't care about your bootloader version usually (though I've seen some ROMs require a certain bootloader). However, stock ROMs and stock OTA updates do have bootloaders, which is why downgrading can be risky.
Click to expand...
Click to collapse
Downgrading is a piece of cake if you don't use RSDlite - it throws an error and stops. Using the bat file it can happily throw all the errors it wants and all I care is at the end I have what I want.
It does indeed change the entire environment when you bat file the zip contents. You can bat file to get from 8 to 7 and then use RSDlite to flash a different 7 OR 8 zip file. There is no resulting difference in whether you RSDlite it or bat file it - the bat file simply comes from the .xml file that is within the zip. There is very little or no difference between that among addison factory/stock zips. Other zips are different (custom ROMs.)
Grab any factory/stock zip for addison and expand it and you will see modems, bootloaders, indeed absolutely everything you would find on that phone if you went to a store and bought it. SupahCookie simply added a couple lock command lines because it was intended for folks who somehow thought that if phone was locked they could take it back to the store and get their money back. Or some such. I found that ATT folk didn't care if you were on CM or whatever if you just needed to swap SIMs or whatever.
I DON'T want to lock the phone as it prevents me from modifying forever. Oh yeah that reminds me I was going to post the obligatory guide (again) about how to flash a white boot logo so you don't get that message - it's still there LOL but since the font is in white, you can't see it.
I have a Moto Z2 Play and used this to get out of a rather sticky situation.. My IEMI shows 0 now and I'm curious if there's a way to fix this? Also, You say you've done OTA updates? My phone is telling my I have some, is it safe to try?
Necrowr said:
I have a Moto Z2 Play and used this to get out of a rather sticky situation.. My IEMI shows 0 now and I'm curious if there's a way to fix this? Also, You say you've done OTA updates? My phone is telling my I have some, is it safe to try?
Click to expand...
Click to collapse
Thanks for feedback and great on success.
IMEI will show zero if using oreo, It will show again if using N. Remember that if you go from O to N you need to use the "Alternative to RSD" as RSD will simply throw an error and stop.
If you have TWRP and/or Magisk you must get rid of them before ota - if twrp present you will soft brick and have to do alternative again - flash a stock recovery. Simply uninstalling/flash magisk will probably not be enough - it will likely d/l but error part way through update. If you are sitting on rafikowy's stock oreo, and haven't modified it, you should be fine. I know Apr and June are out there. I flashed his stock 8.0 and took June fine. Z2 should be no different though of course I can't guarantee it
If you have success, let us know what you have done so others looking in will know. Thanks!
KrisM22 said:
Thanks for feedback and great on success.
IMEI will show zero if using oreo, It will show again if using N. Remember that if you go from O to N you need to use the "Alternative to RSD" as RSD will simply throw an error and stop.
If you have TWRP and/or Magisk you must get rid of them before ota - if twrp present you will soft brick and have to do alternative again - flash a stock recovery. Simply uninstalling/flash magisk will probably not be enough - it will likely d/l but error part way through update. If you are sitting on rafikowy's stock oreo, and haven't modified it, you should be fine. I know Apr and June are out there. I flashed his stock 8.0 and took June fine. Z2 should be no different though of course I can't guarantee it
If you have success, let us know what you have done so others looking in will know. Thanks!
Click to expand...
Click to collapse
I actually flashed to this: ALBUS_C_7.1.1_NPS26.118-24_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which is a 7.1.1 variant and it is showing 0 when I check settings and when I dial *#06#. However upon connecting to the computer and running mfastboot getvar imei it returned a value. I only did the steps above which would mean I don't have TWRP or Magisk (when I fastboot and click recovery I get "no command")
****** Additional information *********
XT1710-01 Duel Sim Variant
I started your steps, only being able to access fastboot. The device would throw an error (I don't recall exactly but it ended up showing me them in the bootloader logs) whenever I tried to start it, or go to recovery. #DefinitelyThoughtItWasDead
Necrowr said:
I actually flashed to this: ALBUS_C_7.1.1_NPS26.118-24_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which is a 7.1.1 variant and it is showing 0 when I check settings and when I dial *#06#. However upon connecting to the computer and running mfastboot getvar imei it returned a value. I only did the steps above which would mean I don't have TWRP or Magisk (when I fastboot and click recovery I get "no command")
****** Additional information *********
XT1710-01 Duel Sim Variant
I started your steps, only being able to access fastboot. The device would throw an error (I don't recall exactly but it ended up showing me them in the bootloader logs) whenever I tried to start it, or go to recovery. #DefinitelyThoughtItWasDead
Click to expand...
Click to collapse
What rom was on phone when you got it and what have you done to it? Has it ever run 8.x?
original country of phone?
The bat file will always throw a lot of slot errors.
https://mirrors.lolinet.com/firmware/moto/albus/official/RETUS/
or
https://mirrors.lolinet.com/firmware/moto/albus/official/RETAIL/
might have some stock ROMs of interest...
KrisM22 said:
What rom was on phone when you got it and what have you done to it? Has it ever run 8.x?
original country of phone?
The bat file will always throw a lot of slot errors.
might have some stock ROMs of interest...
Click to expand...
Click to collapse
It had 7.1.1 stock. I rooted it, and then flashed Resurrection Remix (which was yes 8.1 I believe) and the upgraded bootloader. I then found out my service wouldn't work with that.. so I attempted to flash back to stock which gave me a flurry of issues.. eventually getting to nothing but fastboot working. Flashed back to working with your guide to 7.1.1
If it helps in in fastboot it tells me BL: C0.CD
Necrowr said:
It had 7.1.1 stock. I rooted it, and then flashed Resurrection Remix (which was yes 8.1 I believe) and the upgraded bootloader. I then found out my service wouldn't work with that.. so I attempted to flash back to stock which gave me a flurry of issues.. eventually getting to nothing but fastboot working. Flashed back to working with your guide to 7.1.1
If it helps in in fastboot it tells me BL: C0.CD
Click to expand...
Click to collapse
Custom ROMs won't usually update the bootloader (even if they are newer) as stock ROMs typically only have the bootloader firmware.
You could look into flashing the stock Oreo albus 8.0 ROM https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153 or the 8.0 June 2018 firmware https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-albusretail8-0-0opss27-76-t3822195 but please check that firmware has been released for your device variant.
I don't know if updating your baseband to stock Oreo formally may fix your IMEI issue.
Necrowr said:
It had 7.1.1 stock. I rooted it, and then flashed Resurrection Remix (which was yes 8.1 I believe) and the upgraded bootloader. I then found out my service wouldn't work with that.. so I attempted to flash back to stock which gave me a flurry of issues.. eventually getting to nothing but fastboot working. Flashed back to working with your guide to 7.1.1
If it helps in in fastboot it tells me BL: C0.CD
Click to expand...
Click to collapse
"BL: C0.CD" even right after flashing that albus 7.1.1 using "alternative" above?
What happens if you flash one of the oreo roms from the links I gave you above?
Yeah, RR wouldn't change bootloaders... so you upgraded bootloaders independendently?- that could easily lead to a soft brick... -
I read RR on Z2 and it says nothing about bootloaders even though it says 8.1 based, so i wonder if it needs 7.x bootloaders? I did not read entire thread...
In a reverse, I would wonder if you put an 8 on there if you wouldn't see your IMEI. (On the Z if you flash 8 You won't see the IMEI until you return to 7.)(wondering if z2 is reversed)
KrisM22 said:
"BL: C0.CD" even right after flashing that albus 7.1.1 using "alternative" above?
What happens if you flash one of the oreo roms from the links I gave you above?
Yeah, RR wouldn't change bootloaders... so you upgraded bootloaders independendently?- that could easily lead to a soft brick... -
I read RR on Z2 and it says nothing about bootloaders even though it says 8.1 based, so i wonder if it needs 7.x bootloaders? I did not read entire thread...
In a reverse, I would wonder if you put an 8 on there if you wouldn't see your IMEI. (On the Z if you flash 8 You won't see the IMEI until you return to 7.)(wondering if z2 is reversed)
Click to expand...
Click to collapse
Yes, right after flashing that is the BL that fastboot is showing me. I don't recall updating the bootloader so to speak, however RR did require an updated variant of twrp which I flashed 3.2.2 I believe to get (unsure if that would have changed the bootloader or not). I also tried flashing a stock Oreo (which you've stated stock Roms usually only have the bootloaders so maybe somewhere during this process I updated it?). I wish I had all the notes for what I did to give more precise information, but I'm in a position where I really need my phone so I kinda just panicked and started flashing things when my service wouldn't work.
I'm highly considering trying to run an OTA (though very afraid of bricking). - On a side note though, it wouldn't even tell me I had OTA's until I did the steps in the original post here (doing the different 7.1.1. and 8.0 flashes, it wouldn't ever tell me I had updates, and now it does).
*** Edit ***
Looks like I'm able to enter stock recovery, which makes me believe everything is stock at the moment.
Necrowr said:
Yes, right after flashing that is the BL that fastboot is showing me. I don't recall updating the bootloader so to speak, however RR did require an updated variant of twrp which I flashed 3.2.2 I believe to get (unsure if that would have changed the bootloader or not). I also tried flashing a stock Oreo (which you've stated stock Roms usually only have the bootloaders so maybe somewhere during this process I updated it?). I wish I had all the notes for what I did to give more precise information, but I'm in a position where I really need my phone so I kinda just panicked and started flashing things when my service wouldn't work.
I'm highly considering trying to run an OTA (though very afraid of bricking). - On a side note though, it wouldn't even tell me I had OTA's until I did the steps in the original post here (doing the different 7.1.1. and 8.0 flashes, it wouldn't ever tell me I had updates, and now it does).
*** Edit ***
Looks like I'm able to enter stock recovery, which makes me believe everything is stock at the moment.
Click to expand...
Click to collapse
If you flashed a stock O that would have changed bl to O, but doing the above with the stock 7.1.1 would have changed them back to N. No matter (other than academic) that you don't remember the path - flashing a stock anything reverts it to that point in time. However, IMEI may have been moved - don't know. It will likely show on EITHER 7.x or 8.x stock - just don't know which.
If you flash a stock 8.x from those links I gave you above, it should offer you ota, ASSUMING there are any at this point in time(Z has 2). Adding Magisk at any point seems to hose you for receiving any more ota's - don't understand why, even with magisk uninstall, so that would mean going back to the latest stock and losing what you have (which is why I try to take a TBPro and copy that backup to PC (because re-flashing 8.x stock will likely reset internal storage.).
yes, if you enter stock recovery, you are likely at stock, though you could reflash the latest 7 or 8 stock to be sure, depending on which you want to use as base. Since 8 is having security fixes released, I choose 8 and will likely have no more interest (no time!) in 7.
So, ran the OTA and it was fine running the update and staying on N. I also downloaded the OTA for Oreo, when trying to update the recovery error'd out. It looked like the error said "Error in modem unexpected results" or something similar.
Necrowr said:
So, ran the OTA and it was fine running the update and staying on N. I also downloaded the OTA for Oreo, when trying to update the recovery error'd out. It looked like the error said "Error in modem unexpected results" or something similar.
Click to expand...
Click to collapse
did it offer to let you d/l it again? you could try that.
However, there exist O stock zips in those links I gave you so you could just flash the latest...
Hey guys, I tried flashing the stock moto oreo rom (october patch) through 1. flashing via fastboot and 2. twrp flashable rom.
Both methods worked but I lost my IMEI, regardless of which method I flashed the rom with.
I had made two EFS & Persist backups (one from resurrection remix rom and one from a twrp nougat june patch rom) and tried to restore them after flashing the moto oreo rom, but no success.
Can anyone help me with this? I really want to use the stock oreo rom!
Please help guys!
What version of twrp?
twrp which error during restore?
Ever flashed someone else's persist file when you were on stock?
I too am in the same boat, I upgraded to 8with the smart assist no isshes. and when trying to restore my efs and persits (backed up from android 7) with twrp it just doesnt work, hope someone has a fix
twrp-3.2.3-1-potter
for me
my imei also shows up in my settings but doenst work
vonwap said:
I too am in the same boat, I upgraded to 8with the smart assist no isshes. and when trying to restore my efs and persits (backed up from android 7) with twrp it just doesnt work, hope someone has a fix
twrp-3.2.3-1-potter
for me
my imei also shows up in my settings but doenst work
Click to expand...
Click to collapse
Refer to this post - https://forum.xda-developers.com/showpost.php?p=77359949&postcount=2
And the FAQ "On soak test 2 or later, I have my IMEI but no signal. What can I do?"
NZedPred said:
Refer to this post - https://forum.xda-developers.com/showpost.php?p=77359949&postcount=2
And the FAQ "On soak test 2 or later, I have my IMEI but no signal. What can I do?"
Click to expand...
Click to collapse
Thank you
I installed the twrp flashable stock and I got my 3g back, i did the OTA update and now I think its bricked, It will only boot to twrp :crying:
vonwap said:
Thank you
I installed the twrp flashable stock and I got my 3g back, i did the OTA update and now I think its bricked, It will only boot to twrp :crying:
Click to expand...
Click to collapse
Try flashing one of the full flashable zips from that thread, get the last one. But in the installer, do not select firmware.
Hopefully that will get you going again. And no, don't ever install an ota.
NZedPred said:
Try flashing one of the full flashable zips from that thread, get the last one. But in the installer, do not select firmware.
Hopefully that will get you going again. And no, don't ever install an ota.
Click to expand...
Click to collapse
Thanks for all your help is there any way to fix OTA updates? like relocking bootloader? or should I just leave that unlocked ?
I just installed \POTTER_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and am getting a 3g \ H signal now but its a different sim card and service from original card, seems to be working now
Is it just oreo that screws everything up , I know this is all over but its not very straight forward
im no android expert clearly
vonwap said:
Thanks for all your help is there any way to fix OTA updates? like relocking bootloader? or should I just leave that unlocked ?
I just installed \POTTER_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and am getting a 3g \ H signal now but its a different sim card and service from original card, seems to be working now
Is it just oreo that screws everything up , I know this is all over but its not very straight forward
im no android expert clearly
Click to expand...
Click to collapse
Bootloader doesn't matter, can stay unlocked.
And the IMEI/4g problem is Nougat only, never heard of someone who lost something on Oreo or when updating to it.
If you flash latest Oreo firmware for your region (endings with 17-xx are US, 13-xx is for the rest as far as I know) you should be good to go.
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
reganEZ said:
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
Click to expand...
Click to collapse
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
riyan65 said:
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
Click to expand...
Click to collapse
So just download a TWRP flashable 8.1.0 rom and i m good?
reganEZ said:
So just download a TWRP flashable 8.1.0 rom and i m good?
Click to expand...
Click to collapse
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Click to expand...
Click to collapse
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
+ i tried the method and it says "slot not found" error
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
reganEZ said:
+ i tried the method and it says "slot not found" error
Click to expand...
Click to collapse
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Wolfcity said:
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
Click to expand...
Click to collapse
Hello, Thank you for your reply.
I understand I cannot use an older firmware. I remember I unlocked my BL when I was in 7.0 itself, but when I installed the Arrow 9.0, I flashed the 8.1 firmware zip to get the NFC and Fingerprint working. So now my ro.build fingerprint doesnt tell me which firmware build i am on it just says "8.1"
I am confused what to do. Should I download the latest 8.1 moto rom and flash it? I tried the TWRP flashable rom but the phone just goes upto Hello Moto bootscreen and then bootloops.
I erased everything and flashed PE 9.0 again.
reganEZ said:
Hello, Thank you for your reply.
.....Should I download the latest 8.1 moto rom and flash it?.......
Click to expand...
Click to collapse
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.batflashallO.bat?dl=0
Click to expand...
Click to collapse
Wolfcity said:
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Click to expand...
Click to collapse
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
MrAshuBrar said:
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
Click to expand...
Click to collapse
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
CanadianGixxerman said:
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Click to expand...
Click to collapse
Flash all the system files while locking. (0-8). Older locking guides have only 0-4. Newer firmware has 9 system files.
Wolfcity said:
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
Click to expand...
Click to collapse
Thank you so much ?
Just got the xt1687 usa model retus software channel... Is it safe to flash potter roms on here?
itcanbdone said:
Just got the xt1687 usa model retus software channel... Is it safe to flash potter roms on here?
Click to expand...
Click to collapse
What firmware? 7.0 or 8.1? If you are on 8.1 it's as safe as it ever is to flash a custom ROM.
If you're still on 7.0 you should update first and in any case make a full nandroid backup incl. Persist and EFS before you flash anything.
Sent from my Moto G5 Plus using XDA Labs
Currently on 7.0 so unlock bootloader n twrp after update? Thanks
itcanbdone said:
Currently on 7.0 so unlock bootloader n twrp after update? Thanks
Click to expand...
Click to collapse
Yes. If you can update via OTA that should be the way to go. If you can't flash full Motorola signed fastboot 8.1 firmware:
https://mirrors.lolinet.com/firmware/moto/potter/official/
Unlock the BL on Motorola website, boot to or flash TWRP and make a full nandroid incl. persist.
After that you shoud be good to go and flash custom ROMS. Check whether the selected ROM needs 7.0 or 8.1 as base, almost all of them need stock Oreo.
Sent from my Moto G5 Plus using XDA Labs
Oh yeah, I'm rusty.. Software channel duh, linux gets its stuff there... I guess it is potter xt1687, which is odd though as a website said it wasn't potter.. Anyway, looking in the gsm arena and checking against other variants of our g5 plus, it seems that everything but the radios are the same so is it safe to flash variants backing up the original radio? Thank you very much
itcanbdone said:
Oh yeah, I'm rusty.. Software channel duh, linux gets its stuff there... I guess it is potter xt1687, which is odd though as a website said it wasn't potter.. Anyway, looking in the gsm arena and checking against other variants of our g5 plus, it seems that everything but the radios are the same so is it safe to flash variants backing up the original radio? Thank you very much
Click to expand...
Click to collapse
You wrote you're on the retus channel and model is 1687. Here are the firmwares for your device, the second one ( OPS28.85-17-6-2) is the latest and last build, flash that one and everything should be fine:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETUS/
You still know how to fastboot flash? Unzip firmware to ADB/Fastboot folder etc.?
Here's a post I made for someone else, it includes a link to a flashall.bat, put in in there too so you don't have to manually flash all partitions, just double-click it and it'll run all the commands for you.
https://forum.xda-developers.com/g5...solve-imei0-explanation-t3825147/post80478329
Sent from my Moto G5 Plus using XDA Labs
So I was on stock and flashed twrp after successful unlock of bootloader. After backing up, got stuck at bootloader before any further changes made, yet it was booting fine with bootloader before that.. Saw in a post to flash stock after re locking bootloader, then unlick again...
I skipped that just to get a rom on, now running havoc 9.0 but cannot seem to root as the two su & magisk arent cuttin it in twrp.
Are you really telling me I gotta revert back to stock and flash root in stock to get root?
If so, couldnt i just flash havoc 8.1 and root that way.
Yes i still remember how to flash via adb. Thank you very much
itcanbdone said:
So I was on stock and flashed twrp after successful unlock of bootloader. After backing up, got stuck at bootloader before any further changes made, yet it was booting fine with bootloader before that.. Saw in a post to flash stock after re locking bootloader, then unlick again...
I skipped that just to get a rom on, now running havoc 9.0 but cannot seem to root as the two su & magisk arent cuttin it in twrp.
Are you really telling me I gotta revert back to stock and flash root in stock to get root?
If so, couldnt i just flash havoc 8.1 and root that way.
Yes i still remember how to flash via adb. Thank you very much
Click to expand...
Click to collapse
I'm not sure that I understand everything. After flashing (official) TWRP and making a nandroid you weren't able to boot to system, only to bootloader?
Have you updated to 8.1 stock Oreo before?
Havoc needs that definitely:
https://forum.xda-developers.com/g5-plus/development/rom-havoc-os-v2-2-t3906282/post79018816
It won't make any sense to revert to stock and root it because after flashing havoc root will be lost anyway. What do you mean with "the two su & Magisk aren't cuttin it in TWRP"? (English is not my native language)
Why two? There should be magisk only to flash.
So the goal seems to be making TWRP work correctly when running havoc to be able to flash magisk.zip and boot to system.
Can you post a recovery log after the attempt to flash magisk from TWRP (the function is in TWRP/ advanced/log.)
Can you boot to havoc directly now?
Are you able to reach TWRP?
I need the error message that appears when you try to flash magisk, should be in the log.
And what is it about two things, su AND magisk?
Magisk.zip is the su binary.
Please provide some more information and sorry if it's me who don't understand something.
Sent from my Moto G5 Plus using XDA Labs
- I got root after all. Seems I was just flashing no verity before root and it was suppise to be after.
- there was a super su which I'd rather have to mod things with but neither worked until i figured out as mentioned above
- now I'm trying to get gaps to work..
- also having problem flashing rom withou encryption, it keeps forcing it encrypted.
- here is link to 3 images of what i've got currently:
https://mega.nz/#F!q3pVQIDJ!kwfNgjMEEssa97rrZJjWHg
Thanks
itcanbdone said:
- I got root after all. Seems I was just flashing no verity before root and it was suppise to be after.
- there was a super su which I'd rather have to mod things with but neither worked until i figured out as mentioned above
- now I'm trying to get gaps to work..
- also having problem flashing rom withou encryption, it keeps forcing it encrypted.
- here is link to 3 images of what i've got currently:
https://mega.nz/#F!q3pVQIDJ!kwfNgjMEEssa97rrZJjWHg
Thanks
Click to expand...
Click to collapse
Never use SuperSU alongside with magisk but I think you know that now.
To remove encryption: It's not enough to wipe data in TWRP, you have to format it (the option where you have to confirm with "Yes" and not just wipe). That will wipe your internal storage too.
Only formatting data in TWRP will remove the encryption and the Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip will keep it decrypted. Make sure usb debugging is enabled.
Boot to TWRP and flash ROM and Gapps (both in one action without a reboot in between).
Now flash the no verity-force encryption.zip.
You can reboot to system now but you can also flash the magisk.zip directly afterwards, it helps to keep the data partition encrypted too.
I flash everything in a row.
Check that thread: https://forum.xda-developers.com/g5-plus/how-to/guide-how-to-remove-device-encryption-t3863586
(page 2)
Sent from my Moto G5 Plus using XDA Labs
Thanks for the encryption link.. Any idea on the pros n cons on encryption in the world of flashing zips and modding?
I see pros n cons on google search for encryption but not from developments perspective
itcanbdone said:
Thanks for the encryption link.. Any idea on the pros n cons on encryption in the world of flashing zips and modding?
I see pros n cons on google search for encryption but not from developments perspective
Click to expand...
Click to collapse
I decrypt my device, for example to have access to /data in case of a bootloop because of a magisk module. I don't like the idea of not physically seeing parts of my partitions or even not being able to edit it.
From the sight of security it's better to encrypt naturally. It depends a bit how old your device is and what you want to do with it.
I never lost my device or it was getting stolen so as long it's in my pocket I don't need encryption.
But that's just my personal opinion.
Sent from my Moto G5 Plus using XDA Labs
Hey so I found a really cool way to decrypt but ROM after it's already been encrypted and you have all your stuff in it, I figured it out on accident. What I did was simply did a backup through TWRP and formatted the drive. When I restored the drive it was decrypted! And all this time everyone ever told me that you cannot decrypt. Pretty cool. Actually found this out by switching to a ROM and then going back anyway maybe people should know this? Hope it helps thanks for all the pointers