Related
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
Hi guys,
First, English isn't my first language so, sorry if it hurts your eyes :/
Second, I'm new to TWRP / root etc... (since yesterday) and I don't fully understand the exact meening of all words like flash / rom etc...
So: I'm actually blocked in the "Your device can't be checked for corruption. Please lock the bootloader". Apparently it's a normal screen now, when we boot we always see this. OK ( at least that's what I read)
My volume keys aren't doing anything and I can't access my phone anymore.
I can access TWRP if I want.
Thx for responding :good:
Adb & fastboot still recognize your device ?
If yes flash twrp as recovery with fastboot and boot into it with fastboot.
coremania said:
Adb & fastboot still recognize your device ?
If yes flash twrp as recovery with fastboot and boot into it with fastboot.
Click to expand...
Click to collapse
How can I know if ADB recognize my phone?
I can access TWRP so I don't need to flash it again ? Is there a difference between just flash TWRP and flash TWRP with fastboot ?
Sry, my bad, i miss read that you can access twrp, sry, I thought you can't, what happens if you flash a rom, which twrp is installed, what were your steps that you end stuck on bootloader message ?
Edit: if your issue is that you don't know how to start flashing, read the Los thread and follow the op.
Instructions:
1. Install the Universal bootloader and your model specific modem.Failure to do so will not allow flashing the ROM!
2. Update recovery [Recommended -> Official TWRP for Axon7
3. Factory reset if coming from another ROM.
4. Install ROM
5. Install GApps (optionally) [Recommended -> Open GApps (arm64) (7.1) 2017-02-01 or Newer
Download all files from the thread and put them on to your microsdcard, if your twrp is up to date you don't have to do this again. Flash the zip files in the order of the instructions, just press install at twrp and choose the zips, you can add multiple and flash them together.
Man, trust me, I'm not a lazy man and all I want is to have my phone back even if it's stock
I don't understand what you're trying to make me do, sincerely
If you can give me a link where I can have a guide steps by steps or make this guide for me that would be the best thing of my day...
... I really need to wait wtf
update: I wipe all my phone data
I no longer have TWRP installed but the "basic" android recovery
(with those option when you start it:
Reboot system now
reboot to bootloader
apply update from adb
.
.
.
Power OFF)
I'm such a **** wtf
I really don't know your issue, except you seem not to read enough. What guide you want ? How I flash a custom rom to my phone ? How to use twrp ?Why you unlocked your bootloader ? How did you manage to have the stock recovery back ?
I have to guess what you want and what you already did . If you need a guide, here are severals in the guide section.
https://forum.xda-developers.com/axon-7/how-to
TheGreatNarchy said:
... I really need to wait wtf
update: I wipe all my phone data
I no longer have TWRP installed but the "basic" android recovery
(with those option when you start it:
Reboot system now
reboot to bootloader
apply update from adb
.
.
.
Power OFF)
I'm such a **** wtf
Click to expand...
Click to collapse
So you are stuck with stock recovery and not TWRP? If so I would find a guide to "flash" or install TWRP in what is called EDL mode.
If you can do that, you then need to:
boot directly into TWRP and wipe dalvik, system, data, and cache.
Then install universal boot loader and modem for your device. (A2017G)
Next install latest TWRP img found on https://TWRP.me
And lastly reboot into recovery again and install Rom (version of Android you want to try) and any other modifications you want (kernel, gapps, magisk, etc.)
If you have any questions don't be afraid to ask. Good luck!
JTruj1ll0923 said:
So you are stuck with stock recovery and not TWRP? If so I would find a guide to "flash" or install TWRP in what is called EDL mode.
If you can do that, you then need to:
boot directly into TWRP and wipe dalvik, system, data, and cache.
Then install universal boot loader and modem for your device. (A2017G)
Next install latest TWRP img found on https://TWRP.me
And lastly reboot into recovery again and install Rom (version of Android you want to try) and any other modifications you want (kernel, gapps, magisk, etc.)
If you have any questions don't be afraid to ask. Good luck!
Click to expand...
Click to collapse
What? You can flash the ROM after flashing the universal bootloader, then also flash TWRP via itself, and you'll stay on the latest...
Rebooting without a ROM is bad. just bad. even rebooting to recovery. that's how i got my dfu brick
Choose an username... said:
What? You can flash the ROM after flashing the universal bootloader, then also flash TWRP via itself, and you'll stay on the latest...
Rebooting without a ROM is bad. just bad. even rebooting to recovery. that's how i got my dfu brick
Click to expand...
Click to collapse
I am not 100% sure what you are saying. But yeah, sure. Flash the Rom after the universal bootloader and modem. Then flash twrp. Then reboot.
If you think that is better for OP then that works. I haven't ever had the problem of rebooting to recovery without a rom installed but you're right that it probably is safer.
I only suggested that because the TWRP that comes with the real old universal bootloader on LOS thread is also very old. So, flashing a rom with the new version I thought would be best to avoid errors. Thanks!
JTruj1ll0923 said:
I am not 100% sure what you are saying. But yeah, sure. Flash the Rom after the universal bootloader and modem. Then flash twrp. Then reboot.
If you think that is better for OP then that works. I haven't ever had the problem of rebooting to recovery without a rom installed but you're right that it probably is safer.
I only suggested that because the TWRP that comes with the real old universal bootloader on LOS thread is also very old. So, flashing a rom with the new version I thought would be best to avoid errors. Thanks!
Click to expand...
Click to collapse
The thing is, after you flash the universal bootloader, the TWRP on the sd gets replaced. but the TWRP that you are using is loaded in RAM. So even if you install a TWRP version you'll stay in the version you flashed before until you reboot. If you install the universal bootloader and then install the TWRP img you'll keep everything as-is on the next reboot. I discourage rebooting without a system especially on a G because any interruption might lock the phone in DFU. On an a2017U that wouldn't be a problem because the phone boots into edl if any software error is present
Hi guys,
I got the ASUS Zenfone 3 Zoom and started playing with it. Unfortunately I managed to soft brick it and somehow I can't go back to stock. Here are all the things I did. I would be happy to get any ideas what to try next:
1. unlocked the bootloader - using asus's official unlock tool
2. flashed twrp recovery - twrp-3.2.1-0-Z01H-20180304.img, using:
adb reboot bootloader
fastboot flash recovery twrp.img
3. updated asus's firmware to the latest official one:
copying UL-Z01H-WW-71.60.139.30.zip onto internal memory
android detects the update and applying it using android
4. Enabling lock pattern at boot (from android settings). Correct pattern required even when booting into recovery
5. Installing supersu via twrp:
adb reboot recovery
installing supersu
wiping caches (the cache partition cannot be wiped)
6. SuperSu working (tested via android)
7. Reading about Magisk. Trying to install magisk via twrp. Magisk's installer complained that the system is not vanilla (due to SuperSu modifications). Have to uninstall SuperSu to return to previous state.
8. Tried uninstalling SuperSu from the program itself (in android). The uninstaller got stuck. The phone become unresponsive and had to reboot.
9. Found a script packaged as an executable zip (to be installed via twrp) that will uninstall SuperSu and return system to pristine state (SuperSu makes a backup of the files it changes before installation) - UPDATE-unSU-signed.zip. Uninstallation worked.
10. Magisk installation still complained about the bootloader. Then things started to go wrong. I unpacked the latest firware UL-Z01H-WW-71.60.139.30.zip, took out boot.img and tried to flash just the bootloader
fastboot flash boot boot.img
11. Upon reboot the phone got stuck at the ASUS logo. Reboot into recovery and into fastboot still works (soft brick). Still shows unlock pattern at boot.
12. I tried flashing the original firmware using TWRP (install a zip). However the installation threw some errors. Unsuccessful.
13. I've tried flashing the system.img from the original firware using fastboot but still it's stuck at the ASUS logo at boot.
fastboot flash system system.img
Here I am stuck. I've read that TWRP cannot install properly the ASUS official firmware but if you flash the original recovery, it can probably flash it properly. Another thing that I think might explain why I cannot get out of the soft brick is that I've enabled the lock pattern at boot, which effectively encrypted some parts of the phone and I have a strong feeling this interferes with the boot process. I will look for a script/installable zip (via twrp) that can remove the lock.
I really need ideas/suggestions before I make something that will turn my phone into a hard brick. Thanks.
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Thanks
+)KEV1N(+ said:
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Click to expand...
Click to collapse
Thanks,
I tried to find a stock recovery images but unsuccessful. Can you tell me where to get it from?
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
-- [link] removed due to XDA regulations
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
mollonado said:
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
Click to expand...
Click to collapse
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
It came preloaded with Nougat? Interesting.
+)KEV1N(+ said:
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
It came preloaded with Nougat? Interesting.
Click to expand...
Click to collapse
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
mollonado said:
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
Click to expand...
Click to collapse
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
+)KEV1N(+ said:
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
Click to expand...
Click to collapse
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
mollonado said:
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
Click to expand...
Click to collapse
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
mollonado said:
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
Click to expand...
Click to collapse
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
+)KEV1N(+ said:
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
Click to expand...
Click to collapse
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
mollonado said:
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
Click to expand...
Click to collapse
First off, my apologies for this late reply (Been superbusy with school and internship assignments)
Secondly, and that is why I only use magisk. Because once you mess with the host file, depending on what module you install, it can range from tripping safetynet to bootlooping.
So quick question, is it still in this state right now since 9 days ago?
Greetings,
Kevin
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
I made a mistake and could not install recovery stock, I followed what you wrote in the beginning install MM recovery and so I did a hard reset and I was able to install the most current recovery stock and installed ROM Oreo, Thanks. Sorry, I'm on google translator.
Thanks in advance......i'm so frustrated feel ripping my **** off.. being struggling with this for 3 days...
I was on official stock 7.0 nougat (generic russian), genesis kernel drmfix & Twrp for about a year with no issue. In fact that's my 1st and only attempt in flashing this phone. Decided to upgrade to 8.0. Big mistake!?!
Used Emma flash to flash the latest stock 8.0 release for my region, Asia. It booted up fine, all was well. I read that flashing stock will simply remove root and twrp. But i realized stock recovery was missing as well. And i can't restore any kind of recovery no matter what i tried. Suggestions please !
When i tried to enter recovery, the phone simply vibrated twice, and then 3 times quickly. If i continue holding the buttons, it goes into a loop of black screen and boot screen.
Tried flashing twrp via adb/fastboot. It appeared successful . No error messages. File size and time taken was also reported. But no recovery upon rebooting.
Fastboot flash recovery twrp.img
I can only flash roms using Emma, Flashtool ftf always fail with a 'no loader' found message.
Tried re-flashing mm, nougat and oreo via Emma. Phone runs well for all but again no stock recovery.
Don't know what else to do or what the problem is......
If i reflash to stock rom and relock boot loader without any recovery, it that dangerous?
Baron Zemo said:
Thanks in advance......i'm so frustrated feel ripping my **** off.. being struggling with this for 3 days...
I was on official stock 7.0 nougat (generic russian), genesis kernel drmfix & Twrp for about a year with no issue. In fact that's my 1st and only attempt in flashing this phone. Decided to upgrade to 8.0. Big mistake!?!
Used Emma flash to flash the latest stock 8.0 release for my region, Asia. It booted up fine, all was well. I read that flashing stock will simply remove root and twrp. But i realized stock recovery was missing as well. And i can't restore any kind of recovery no matter what i tried. Suggestions please !
When i tried to enter recovery, the phone simply vibrated twice, and then 3 times quickly. If i continue holding the buttons, it goes into a loop of black screen and boot screen.
Tried flashing twrp via adb/fastboot. It appeared successful . No error messages. File size and time taken was also reported. But no recovery upon rebooting.
Fastboot flash recovery twrp.img
I can only flash roms using Emma, Flashtool ftf always fail with a 'no loader' found message.
Tried re-flashing mm, nougat and oreo via Emma. Phone runs well for all but again no stock recovery.
Don't know what else to do or what the problem is......
If i reflash to stock rom and relock boot loader without any recovery, it that dangerous?
Click to expand...
Click to collapse
https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479
1. Download 'Modded boot img for 34.4.A.2.118' from that thread
2. Flash stock with Emma
3. Don't turn on the phone, go to fastboot and flash the boot img and TWRP img
levone1 said:
https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479
1. Download 'Modded boot img for 34.4.A.2.118' from that thread
2. Flash stock with Emma
3. Don't turn on the phone, go to fastboot and flash the boot img and TWRP img
Click to expand...
Click to collapse
Hi, Thanks for the reply
1. Done
2. Which do i choose in Emma? Software update content (erases user content) or Firmware update versions.
Also must i choose the stock rom which must tally with boot img 34.4.A.2.118? ie. the rom version which ends with .118?
3. Fingers crossed.
Baron Zemo said:
Hi, Thanks for the reply
1. Done
2. Which do i choose in Emma? Software update content (erases user content) or Firmware update versions.
Also must i choose the stock rom which must tally with boot img 34.4.A.2.118? ie. the rom version which ends with .118?
3. Fingers crossed.
Click to expand...
Click to collapse
Yes, flash 118 fw. If you want to save data, back it up first.
levone1 said:
Yes, flash 118 fw. If you want to save data, back it up first.
Click to expand...
Click to collapse
I have given up I followed the instructions explicitly.
Tried flashing latest stock from different regions via Emma, Flashtool/xperifirm and ftfs from online depositories. Then flashed with the corresponding downloaded boot.img, then TWRP without any rebooting inbetween. Even created patched boot.img from extracted .elf files to try. There was no error messages or anything.
Recovery runs fine. But starting normally it either boot loops are stuck at Sony logo.
Is there any other way to get the drm restored? Can i root it via common methods and work my way from there?
Baron Zemo said:
I have given up I followed the instructions explicitly.
Tried flashing latest stock from different regions via Emma, Flashtool/xperifirm and ftfs from online depositories. Then flashed with the corresponding downloaded boot.img, then TWRP without any rebooting inbetween. Even created patched boot.img from extracted .elf files to try. There was no error messages or anything.
Recovery runs fine. But starting normally it either boot loops are stuck at Sony logo.
Is there any other way to get the drm restored? Can i root it via common methods and work my way from there?
Click to expand...
Click to collapse
Did you full wipe before flashing, or when flashing, (check boxes in 'wipe' section)?
levone1 said:
Did you full wipe before flashing, or when flashing, (check boxes in 'wipe' section)?
Click to expand...
Click to collapse
If i use flash tool, i ticked all boxes under Wipe sin during stock rom flashing. All the rest (exclude sin & misc TAs) are unchecked. No other wiping during the process.
If i use Emma, there's no chance to wipe anything, it's auto flash stock rom, then flash boot.img, then flash Twrp, then reboot to a boot loop.
btw, i've tried latest twrp 3.2.3 and 3.2.1
Also, when i flash stock, is stock recovery supposed to return? Twrp just gets removed, and i don't have any recovery at all.
Am i cursed?
Baron Zemo said:
If i use flash tool, i ticked all boxes under Wipe sin during stock rom flashing. All the rest (exclude sin & misc TAs) are unchecked. No other wiping during the process.
If i use Emma, there's no chance to wipe anything, it's auto flash stock rom, then flash boot.img, then flash Twrp, then reboot to a boot loop.
btw, i've tried latest twrp 3.2.3 and 3.2.1
Also, when i flash stock, is stock recovery supposed to return? Twrp just gets removed, and i don't have any recovery at all.
Am i cursed?
Click to expand...
Click to collapse
I don't think you can boot to Sony stock recovery. If you flash stock 118, then flash modded boot img and TWRP, and reboot, I don't know why it wouldn't work. Many have done it. Just to be sure -
1. To enter recovery, you power off, then press power and volume down together, until vibration.
2. First boot takes a while. Wait a good 10 minutes to be sure.
levone1 said:
I don't think you can boot to Sony stock recovery. If you flash stock 118, then flash modded boot img and TWRP, and reboot, I don't know why it wouldn't work. Many have done it. Just to be sure -
1. To enter recovery, you power off, then press power and volume down together, until vibration.
2. First boot takes a while. Wait a good 10 minutes to be sure.
Click to expand...
Click to collapse
There's why it's so odd to me. Not the 1st time i'm doing this too. I would have waited even longer if it was stuck, but it was looping continuously back to the start.
I suspect could simply be a hardware fault developed. Anyway, i've given up. Probably best excuse to get a new phone
Many thanks for trying to help :good:
I haven't been able to get mine to reboot to recovery either, so i just boot recovery.img from fastboot anytime I want to mod. Kinda annoying but I haven't figured a way around it.
Hello everyone i am in desparate need of some guidance where i unfortunately Hard bricked my Mi9t while trying to flash the new Mokee Rom.
Where i think i went wrong was wiping the system option in twrp. After reboot i was stuck on flashboot and unable to get back into twrp recovery.
I then proceeded to flashboot twrp, also used multiple versions of twrp, again to hopefully be able to get into twrp recovery with no prevail.
Also tried to fastboot via Miflash tool with all latest fastboot roms available currently but kept getting a anti-rollback error.
So then i searched a way to install recovery or stock rom manually via flashboot commands. This caused me to end up where im at, no fastboot, no recovery, no logo at all. I connect the usb and the phone wont turn on at all, just a dead phone. Power button completely unresponsive now, Vol-Up/Vol-Down + Power and nothing.
I worked on it for countless hours trying to simply get into fastboot now with huge anxiety thinking i killed my phone.
I left my phone to charge all night and woke up this morning trying to get into fastboot again and nothing again.
Can someone please lead me in the right direction???
Everywhere i look the info seems to be outdated. At this point i am willing to send it in for repairs but i live in Indiana, US and there isnt a Xiaomi Service location anywhere in site.
Sad story. What did you do in fastboot? If you can't flash a certain twrp version you would have to do:
1. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (in twrp archives)
2. fastboot erase recovery
3. fastboot flash recovery your-twrp.img
Concerning AntiRollBack:
You can bypass ARB in miflashtool, set the number of your new rom higher or edit the batch/shell-files manually. The first few lines are ARB and device-check.
I know the info comes too late, but maybe someone reads this before trying things the way you did. There have to be some EDL-pins inside the phone to reflash fastboot but you would have to open your phone. My opinion/solution: Cry and send in.
Anyway: Can you tell us what you did to wipe fastboot?
fabsen said:
Sad story. What did you do in fastboot? If you can't flash a certain twrp version you would have to do:
1. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (in twrp archives)
2. fastboot erase recovery
3. fastboot flash recovery your-twrp.img
Concerning AntiRollBack:
You can bypass ARB in miflashtool, set the number of your new rom higher or edit the batch/shell-files manually. The first few lines are ARB and device-check.
I know the info comes too late, but maybe someone reads this before trying things the way you did. There have to be some EDL-pins inside the phone to reflash fastboot but you would have to open your phone. My opinion/solution: Cry and send in.
Anyway: Can you tell us what you did to wipe fastboot?
Click to expand...
Click to collapse
When i 1st attempted to recover twrp i used TWRP 3.1.1-2 fixed from 4PDA. Ran the .exe file and the prompt said both fires installed successfully, but when i did a reboot it wouldnt go into twrp anymore, just stuck in logo so i would end up back in bootloader.
ttp://en.miui.com/thread-942449-1-1.html
This is exactly the instructions i tried to use before i lost fastboot.
At one point while entering the commands, it froze then my phone completely died and could never make it do anything else.
Why the hell did you use an outdated tutorial for an other phone? A few of the commands also wouldn't work because there are only some of these partitions. But if you did it with the right firmware it shouldn't brick anyway. So maybe you were stuck at boot flash. Else you still would be able to boot into fastboot.#
I feel sorry for you bro but it looks like you were searching for a possiblity to brick your phone
fabsen said:
Why the hell did you use an outdated tutorial for an other phone? A few of the commands also wouldn't work because there are only some of these partitions. But if you did it with the right firmware it shouldn't brick anyway. So maybe you were stuck at boot flash. Else you still would be able to boot into fastboot.#
I feel sorry for you bro but it looks like you were searching for a possiblity to brick your phone
Click to expand...
Click to collapse
I kno bro i felt like shyt believe me. Literally all day in panic and anxiety that i just wasnt thinking straight and using any kind of guide i can find and ended up here.
Made some progress today tho.
Since my device manager or MiFlash tool wasnt recognizing my device even when i installed Qualcom drivers and pushing all sorts of buttons lol,
I have now opened her up for some surgery and using the Test-Point EDL method.
https://i.postimg.cc/HWJGWHRw/test-point-redmi-k20-mi-9t.png
While USB connected and shorted these 2 pins my computer finally recognized my device in MiFlash Tool and Device Manager again as Qualcomm HS-USB QDLoader 9008 (COM3)!!!
Now the next problem is the MiFlash tool. I tried to flash rom and status states cannot receive hello packet. From what i understand, i need an authorized account.
Only thing i could find to bypass this was this but currently not yet working. - https://forum.xda-developers.com/mi-8/how-to/unbrick-mi8-edl-authorized-account-t3896677
Any ideas where to go from here?
https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
https://c.mi.com/thread-1479882-1-0.html
I didn't need an authorized account last year but maybe they've changed something. The guides are up to date so maybe follow these steps.
fabsen said:
https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
https://c.mi.com/thread-1479882-1-0.html
I didn't need an authorized account last year but maybe they've changed something. The guides are up to date so maybe follow these steps.
Click to expand...
Click to collapse
Already ran into those sites and actually am currently trying out S-Unlock service to bypass Authorized Account with there XiaomiTool v0.01, and unfortunately again with no prevail.
https://imgur.com/gallery/WMt968b
As you can see i got passed Hello packet, but now it doesn't go passed this message or looks like it didnt do anything.
https://imgur.com/gallery/hHApyJL
Already contacted S-Unlock Admin and now waiting for response. Im assuming im using the right Flashboot Roms. Tried latest flashboot roms from here available. https://xiaomifirmwareupdater.com/miui/davinci/
I also emailed unbrick.ru if they support K20/Mi9T variant and waiting for there reply.
Firmware on your page is not up to date. Use https://mifirm.net/
What device do you have? EEA/Global/CN? And what flashfiles did you use? I'm asking this because the only way I know to brick your device is to flash global/eea-rom on chinese device and lock the bootloader.
fabsen said:
Sad story. What did you do in fastboot? If you can't flash a certain twrp version you would have to do:
1. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (in twrp archives)
2. fastboot erase recovery
3. fastboot flash recovery your-twrp.img
Concerning AntiRollBack:
You can bypass ARB in miflashtool, set the number of your new rom higher or edit the batch/shell-files manually. The first few lines are ARB and device-check.
I know the info comes too late, but maybe someone reads this before trying things the way you did. There have to be some EDL-pins inside the phone to reflash fastboot but you would have to open your phone. My opinion/solution: Cry and send in.
Anyway: Can you tell us what you did to wipe fastboot?
Click to expand...
Click to collapse
Hey,
I'm in a similar boat but I still have fastboot.
I can flash everything I wan't. But flashing a recovery doesn't do anything.
I can not boot into the recovery.
When I boot into the recovery i'm at the bootloop screen.
My PC does recocgnize it as recovery mode tho.
Anyways is there a way to get out of this mess? I wanted to try to flash with miflash over fastboot.img but I can't find any .img to flash.
All I can find are the .zips for twrp.
I didn't want to flash cfw tho. I got into the mess because there was an update today for stock rom and I flashed it with twrp. Because OTA didn't work.
/edit
I found the fastboot files.
But how do I bypass the antirollback error
Waidowai said:
Hey,
I'm in a similar boat but I still have fastboot.
I can flash everything I wan't. But flashing a recovery doesn't do anything.
I can not boot into the recovery.
When I boot into the recovery i'm at the bootloop screen.
My PC does recocgnize it as recovery mode tho.
Anyways is there a way to get out of this mess? I wanted to try to flash with miflash over fastboot.img but I can't find any .img to flash.
All I can find are the .zips for twrp.
I didn't want to flash cfw tho. I got into the mess because there was an update today for stock rom and I flashed it with twrp. Because OTA didn't work.
/edit
I found the fastboot files.
But how do I bypass the antirollback error
Click to expand...
Click to collapse
https://mifirm.net/model/davinci.ttt
to bypass the ARB you can edit the batch/shell files. the first few lines are device-check and ARB. you can also use xiaomitool and select it there.
Edit: I had the same problem with a twrp version I had installed. After switching to russian version I couldn't downgrade twrp. Just try one of the other 2 versions available.
fabsen said:
https://mifirm.net/model/davinci.ttt
to bypass the ARB you can edit the batch/shell files. the first few lines are device-check and ARB. you can also use xiaomitool and select it there.
Edit: I had the same problem with a twrp version I had installed. After switching to russian version I couldn't downgrade twrp. Just try one of the other 2 versions available.
Click to expand...
Click to collapse
I've had the russian version of twrp that didn't allow backups.
I know tried all the other version as well.
What happens is it stays in mi.com unblocked screen and my pc will recognize that it's in recovery but twrp never opens.
Like I said the normal stock recovery is flashable but all other twrp versions don't work for some reason.
I've tried all 3.
I know where the lines are but idk what to write in there.
I tried to just delete the lines and then I've got a different error.
Also when changing the version number it says success it actually flashes for 0 seconds and nothing happens.
Waidowai said:
I've had the russian version of twrp that didn't allow backups.
I know tried all the other version as well.
What happens is it stays in mi.com unblocked screen and my pc will recognize that it's in recovery but twrp never opens.
Like I said the normal stock recovery is flashable but all other twrp versions don't work for some reason.
I've tried all 3.
I know where the lines are but idk what to write in there.
I tried to just delete the lines and then I've got a different error.
Also when changing the version number it says success it actually flashes for 0 seconds and nothing happens.
Click to expand...
Click to collapse
The russian version I've installed allows backups, tried allready.
You can simply remove the lines, just care you dodn't left something or delete too much. Use xiaomitool v2, it'll bypass the lines.
fabsen said:
The russian version I've installed allows backups, tried allready.
You can simply remove the lines, just care you dodn't left something or delete too much. Use xiaomitool v2, it'll bypass the lines.
Click to expand...
Click to collapse
If i download the xiamitool v2 and choose my device is bricked it says feature is not available yet.
/edit
If I choose mod the phone it says my phone serial and all the 3 other things are unknown.
if I select my phone my phone reboots and says waiting for debugging mode....
Then if I delete the ARB lines and try to flash via MiFlash it says error error no such file found
Can someone pls give me some clearer instructions.
Ok I somehow fixed it.
I flashed everything manually like the times before twrp existested.
Now I don't have the OS running but a running twrp.
I could flash xiaomi eu now and be done with it. But I actually wanted to use stock rom and not a costume rom right now because I wanted to switch to a costume rom when a good official comes out whenever that is.
Although flashing the stock rom got me in this mess in the first place. I never had this problem with flashing costume roms.
Anyhow I know this might not be the place to ask but are xiaomi eu and stock actually that different? Also are there any downsides in using it over stock?
My experience on most phones was that early costume roms usually didn't work with all features etc.
/edit
alright who gives a dang I just flashed the eu rom to be safe with updates..
anyhow is it normal that my devices says Redmi by Xiaomi now?
Prior on my stock rom it said MI by mi.com or something
Waidowai said:
Ok I somehow fixed it.
I flashed everything manually like the times before twrp existested.
Now I don't have the OS running but a running twrp.
I could flash xiaomi eu now and be done with it. But I actually wanted to use stock rom and not a costume rom right now because I wanted to switch to a costume rom when a good official comes out whenever that is.
Although flashing the stock rom got me in this mess in the first place. I never had this problem with flashing costume roms.
Anyhow I know this might not be the place to ask but are xiaomi eu and stock actually that different? Also are there any downsides in using it over stock?
My experience on most phones was that early costume roms usually didn't work with all features etc.
Click to expand...
Click to collapse
Basically it's (xiaomi.eu) debloated and optimized but sadly based on chinese official rom. That means no widevine L1.
In my opinion the best rom is EEA (because of "spy restrictions"), debloated with ADBTools with same optimizations which come with mi-globe rombuilder (gpsset, preinstalled magisk, adaway, removed apps). Sadly mi-globe is based on xiaomi.eu which is based on chinese official.
Waidowai
Could you explain the steps you did to flash ALL manual? Which Commands? Which imagens?
Thanks friend.
fabsen said:
Basically it's (xiaomi.eu) debloated and optimized but sadly based on chinese official rom. That means no widevine L1.
In my opinion the best rom is EEA (because of "spy restrictions"), debloated with ADBTools with same optimizations which come with mi-globe rombuilder (gpsset, preinstalled magisk, adaway, removed apps). Sadly mi-globe is based on xiaomi.eu which is based on chinese official.
Click to expand...
Click to collapse
Well i did instal xiaomi.eu now. Not because of optimizations etc.
The only reason is that like i said i don't wanna brick by updating official roms anymore.
I mean maybe it's my bad since I'm running costume roms on all my phones for about 12 years or longer.. can't remember when I started but I think with first xyanogen mod.
And I don't know how to flash stock roms.
But with a costume rom it won't brick and if it does I'm not loosing twrp again.
For debloating I do that myself with the android terminal. So idk what the rom has on bloat I'll just uninstall it.
My only fear was that main features don't work with the costume rom. But from first sight everything but themes work fine. And I couldn't care less.
Well one thing changed the icons look like a chineese appleish phone now. Oh well I'll change that later.
Other than that the fingerprint is more responsive which I do like.
And for some reason my Modelnumber changed from Mi 9T to RedmiK20. Even on the boot it says Redmi now instead of MI.
Idk if it's because of the ROM or because I manually flashed the phone.
---------- Post added at 02:51 PM ---------- Previous post was at 02:42 PM ----------
mauriciocardoso said:
Waidowai
Could you explain the steps you did to flash ALL manual? Which Commands? Which imagens?
Thanks friend.
Click to expand...
Click to collapse
Just download the fastboot rom and flash everything but dummy. You can flash dummy to but that is just for ARB. Depending on what your ARB index is you can flash it to ignore future problems.
My index was 1 tho and apperently if it's under 4 ARB is supposed to be irrelavent.
I'm not to sure on ARB tho because it's my first time dealing with ARB.
Other then that u flash everything else.
You will end up with a phone that is empty. Basically you reformate your phone so nothing is on there but TWRP. My phone was at 59gb/60 or something like that. basically the only folder I've had left was twrp.
Like I said I remembered the method from like 8 years ago when we didn't have twrp.
The problem with this method is that you can easily hardbrick tho I think. Since if it doesn't work you turned your phone into a fancy usb drive.
I only did it because I thought of buying a new one so since the phone was dead in my eyes already I just tried the old method and it worked fine, besides rebranding the phone to RedmiK20 from Mi9T.
Anyhow if your not giving up on the phone yet I wouldn't try it. Only try if you wanna throw the phone in the trash anyways.
just like me , for the anti roll issue u need to flash newers rom like from latest u flash on ur device before (recommend V10.3.11.0.PFJMIXM) u can get on mifirm.net . after download rom extract the file into fastboot tools then copy all .img file into fastboot tools . after that open the fastboot mode on ur phone and tools on pc
then flash this file
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix)
then try reboot phone into recovery
if work let me know . im trying make this method because before this i got this problem to after flashing paranoid rom without format data .
Waidowai said:
Well i did instal xiaomi.eu now. Not because of optimizations etc.
The only reason is that like i said i don't wanna brick by updating official roms anymore.
I mean maybe it's my bad since I'm running costume roms on all my phones for about 12 years or longer.. can't remember when I started but I think with first xyanogen mod.
And I don't know how to flash stock roms.
But with a costume rom it won't brick and if it does I'm not loosing twrp again.
For debloating I do that myself with the android terminal. So idk what the rom has on bloat I'll just uninstall it.
My only fear was that main features don't work with the costume rom. But from first sight everything but themes work fine. And I couldn't care less.
Well one thing changed the icons look like a chineese appleish phone now. Oh well I'll change that later.
Other than that the fingerprint is more responsive which I do like.
And for some reason my Modelnumber changed from Mi 9T to RedmiK20. Even on the boot it says Redmi now instead of MI.
Idk if it's because of the ROM or because I manually flashed the phone.
---------- Post added at 02:51 PM ---------- Previous post was at 02:42 PM ----------
Just download the fastboot rom and flash everything but dummy. You can flash dummy to but that is just for ARB. Depending on what your ARB index is you can flash it to ignore future problems.
My index was 1 tho and apperently if it's under 4 ARB is supposed to be irrelavent.
I'm not to sure on ARB tho because it's my first time dealing with ARB.
Other then that u flash everything else.
You will end up with a phone that is empty. Basically you reformate your phone so nothing is on there but TWRP. My phone was at 59gb/60 or something like that. basically the only folder I've had left was twrp.
Like I said I remembered the method from like 8 years ago when we didn't have twrp.
The problem with this method is that you can easily hardbrick tho I think. Since if it doesn't work you turned your phone into a fancy usb drive.
I only did it because I thought of buying a new one so since the phone was dead in my eyes already I just tried the old method and it worked fine, besides rebranding the phone to RedmiK20 from Mi9T.
Anyhow if your not giving up on the phone yet I wouldn't try it. Only try if you wanna throw the phone in the trash anyways.
Click to expand...
Click to collapse
Don't know how you manage to brick your phone with official firmware tbh. And why should you lose TWRP? I flashed about 10 times (global, eea, chinese, xiaomi.eu, mi-globe) and I still didn't have to reflash twrp once. It won't even touch the recovery partition. I also don't see a reason to mess with fastboot (except your brick haha). The boot behavior (redmi instead of mi) is fine, depends on the rom you've flashed. If you flash global or eea rom it'll switch back to "Mi".
What do you mean by "I don't know how to flash official rom"? Boot up twrp, clean dalvik cache/cache, install... tadaaa. I was also using custom roms on all of my phones but I can't find a reason for now to do so. I see only bugs and things not working. I want my widevine L1 and I want AndroidAuto to be working. I'll stay on global/eea till a good rom pops up.
fabsen said:
Don't know how you manage to brick your phone with official firmware tbh. And why should you lose TWRP? I flashed about 10 times (global, eea, chinese, xiaomi.eu, mi-globe) and I still didn't have to reflash twrp once. It won't even touch the recovery partition. I also don't see a reason to mess with fastboot (except your brick haha). The boot behavior (redmi instead of mi) is fine, depends on the rom you've flashed. If you flash global or eea rom it'll switch back to "Mi".
What do you mean by "I don't know how to flash official rom"? Boot up twrp, clean dalvik cache/cache, install... tadaaa. I was also using custom roms on all of my phones but I can't find a reason for now to do so. I see only bugs and things not working. I want my widevine L1 and I want AndroidAuto to be working. I'll stay on global/eea till a good rom pops up.
Click to expand...
Click to collapse
I mean yeah that's what i thought just flash a official rom like any stock rom. Or rather if you change roms cuz if you update existing roms you don't really need to wipe anything anymore.
But apperently it busted my whole phone. It was a weird brick. My phone wasn't recognized as a phone anymore in fastboot. But it was recognized normal in adb. So I needed to change windows drivers to make my phone recognize.
And after that nothing booted but stock recovery and even then it said I don't have debugging enabled. Eventho I was connected to adb??
Anyhow I think the flash messed up the whole system partition. So what I did is in short formate the whole drive and start with a clean slate.. anyhow don't need to repeat all that.
But yeah I'm with you with the take on costume roms. I don't see the need anymore since most stock roms are decent nowadays and costume roms especially are most likely buggy somehow. Good thing is that most stuff I need in my phone is working on the eu rom. Like I said only thing that I could find not working are themes. But thats ok.
I don't know what that widevine L1 thing is. So I prolly don't need it. But maybe u can explain it to me Always up to learn new things.
Well for now I stick with the costume rom since it's basically no different to me. And the chance of bricking again like that with a costume rom are slim to none. If the phone brick it's most likely just a simple brick that can be fixed with twrp. and if that doesn't work by booting into twrp from adb.
Btw that didn't work on my weird brick either. I couldn't boot anything from adb. It gave me a black screen when trying to boot something.
Anyhow I'm glad I've got it running again. But somehow I'm not that surprised. Most times when I brick phones I can fix it when I'm at the point where I wanna throw the phone away. Cuz then I'm just flashing everything I can to make it work xD.