I followed this guy's post so I'm just going to link his directions over here
https://forum.xda-developers.com/honor-view-10/development/rom-aosp-pie-t3829466/page3
Got this to boot on my phone, finally.
I have an Honor 7x.
I removed the assert line and uploaded the file here
https://drive.google.com/file/d/1Wth0N14bKM1WM2VGXdJN91fPBXzdnsCQ/view?usp=drivesdk
1. Go back to stock using hurupdater, this is a must. I tried coming from a different ROM, and it bootlooped and nothing would stop the bootloop.
2. Factory reset in stock recovery
3. Flash back twrp in fastboot, I used this one https://drive.google.com/open?id=18u...QgwleMIOjsZd7S
4. Flash the rom and bitgapps in one go
5. Factory reset in twrp, format data, and also factory reset in stock recovery
6. It will bootloop you to erecovery, just tap "Reboot" again, and it will boot to the ROM.
7. Enjoy Android P on your phone
This is running pretty damn good for it not to be for our device no bugs as of yet
bugs
dcraffam said:
I followed this guy's post so I'm just going to link his directions over here credits to @crayonicle
https://forum.xda-developers.com/honor-view-10/development/rom-aosp-pie-t3829466/page3
Got this to boot on my phone, finally.
I have an Honor 7x.
I removed the assert line and uploaded the file here https://drive.google.com/drive/folde...fY?usp=sharing
1. Go back to stock using hurupdater, this is a must. I tried coming from a different ROM, and it bootlooped and nothing would stop the bootloop.
2. Factory reset in stock recovery
3. Flash back twrp in fastboot, I used this one https://drive.google.com/open?id=18u...QgwleMIOjsZd7S
4. Flash the rom and bitgapps in one go
5. Factory reset in twrp, format data, and also factory reset in stock recovery
6. It will bootloop you to erecovery, just tap "Reboot" again, and it will boot to the ROM.
7. Enjoy Android P on your phone
This is running pretty damn good for it not to be for our device no bugs as of yet
Click to expand...
Click to collapse
There are following bugs on honor 7x:
1. Hotspot not working.
2. Usb connecetion to pc is charge only can use to transfer files.
Also the camera has too much noice.
there maybe more but these are all that I finded.
itsnikhilkadyan said:
There are following bugs on honor 7x:
1. Hotspot not working.
2. Usb connecetion to pc is charge only can use to transfer files.
Also the camera has too much noice.
there maybe more but these are all that I finded.
Click to expand...
Click to collapse
USB does work you have to enable under developer settings also and the pie nav bar works enable it in gesture
camera
dcraffam said:
I followed this guy's post so I'm just going to link his directions over here credits to @crayonicle
https://forum.xda-developers.com/honor-view-10/development/rom-aosp-pie-t3829466/page3
Got this to boot on my phone, finally.
I have an Honor 7x.
I removed the assert line and uploaded the file here https://drive.google.com/drive/folde...fY?usp=sharing
1. Go back to stock using hurupdater, this is a must. I tried coming from a different ROM, and it bootlooped and nothing would stop the bootloop.
2. Factory reset in stock recovery
3. Flash back twrp in fastboot, I used this one https://drive.google.com/open?id=18u...QgwleMIOjsZd7S
4. Flash the rom and bitgapps in one go
5. Factory reset in twrp, format data, and also factory reset in stock recovery
6. It will bootloop you to erecovery, just tap "Reboot" again, and it will boot to the ROM.
7. Enjoy Android P on your phone
This is running pretty damn good for it not to be for our device no bugs as of yet
Click to expand...
Click to collapse
Is the Camera functional?
zagingi said:
Is the Camera functional?
Click to expand...
Click to collapse
it is very functional, if you mean by the stock aosp cam.
i saw a video on youtube like 5 days ago ... i hesitated posting because i couldn't verify if it's really the 7x or not but it appeared that he was running pie
Great news
How does honor view 10 roms runs in Honor 7x?
dcraffam said:
I followed this guy's post so I'm just going to link his directions over here credits to @crayonicle
https://forum.xda-developers.com/honor-view-10/development/rom-aosp-pie-t3829466/page3
Got this to boot on my phone, finally.
I have an Honor 7x.
I removed the assert line and uploaded the file here https://drive.google.com/drive/folde...fY?usp=sharing
1. Go back to stock using hurupdater, this is a must. I tried coming from a different ROM, and it bootlooped and nothing would stop the bootloop.
2. Factory reset in stock recovery
3. Flash back twrp in fastboot, I used this one https://drive.google.com/open?id=18u...QgwleMIOjsZd7S
4. Flash the rom and bitgapps in one go
5. Factory reset in twrp, format data, and also factory reset in stock recovery
6. It will bootloop you to erecovery, just tap "Reboot" again, and it will boot to the ROM.
7. Enjoy Android P on your phone
This is running pretty damn good for it not to be for our device no bugs as of yet
Click to expand...
Click to collapse
VOLTE working ?
karti16 said:
How does honor view 10 roms runs in Honor 7x?
Click to expand...
Click to collapse
I don't know but I'm using like a secondary and honestly it's the best rom I used I think so far I really like the havoc os because I play mc5 and to me that one ran the game the best but this honor view 9 pie is running exceptionally well and it plays the game great I can't wait for pie to be optimized for the honor because it's gonna be perfect
I need to unlock bootloader. Got any working gcam? Honor 7x camera is showing unrealistic colour.
is VoLTE working ?
can not install always saying error 7 and that the Rom is not for my device...
Hi new to this phone and flashed rros from the openkirin site using just fastboot so have a couple questions about installing this ROM. First question is the link to the recovery isn't even for a honor 7x but guessing that doesn't matter anymore on a treble enabled phone and do you flash it to the ramdisk? Then after you do get it flashed do you install the ROM as a zip or do you extract it to install as a image? Thanks for the help guys kinda crazy thinking you will have twrp and stock recovery on a phone
dcraffam said:
I followed this guy's post so I'm just going to link his directions over here credits to @crayonicle
https://forum.xda-developers.com/honor-view-10/development/rom-aosp-pie-t3829466/page3
Got this to boot on my phone, finally.
I have an Honor 7x.
I removed the assert line and uploaded the file here https://drive.google.com/drive/folde...fY?usp=sharing
1. Go back to stock using hurupdater, this is a must. I tried coming from a different ROM, and it bootlooped and nothing would stop the bootloop.
2. Factory reset in stock recovery
3. Flash back twrp in fastboot, I used this one https://drive.google.com/open?id=18u...QgwleMIOjsZd7S
4. Flash the rom and bitgapps in one go
5. Factory reset in twrp, format data, and also factory reset in stock recovery
6. It will bootloop you to erecovery, just tap "Reboot" again, and it will boot to the ROM.
7. Enjoy Android P on your phone
This is running pretty damn good for it not to be for our device no bugs as of yet
Click to expand...
Click to collapse
the 2 drive links you posted are broke, they are being broken with "..." "drive.google.com/drive/folde...fY?usp=sharing" "drive.google.com/open?id=18u...QgwleMIOjsZd7S"
please use the quote function...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wrong place to ask this question
MOD EDIT
darkmage1991 said:
the 2 drive links you posted are broke, they are being broken with "..." "drive.google.com/drive/folde...fY?usp=sharing" "drive.google.com/open?id=18u...QgwleMIOjsZd7S"
Click to expand...
Click to collapse
I'll reupload now it's this guy @crayonicle being wierd ASF like how many more times you want me to @crayonicle you damn @crayonicle
BigDiqSeitz said:
can not install always saying error 7 and that the Rom is not for my device...
Click to expand...
Click to collapse
I reuploaded the one with that check remove should flash through now
dcraffam said:
I'll reupload now it's this guy @crayonicle being wierd ASF like how many more times you want me to @crayonicle you damn @crayonicle
Click to expand...
Click to collapse
hahahaha you just want more number counts in your thanks meter so you can be "cool"
please delete your spams, it's getting annoying, i am the one who originally posted it, what right do you have to come and take it for your own?
crayonicle said:
hahahaha you just want more number counts in your thanks meter so you can be "cool"
please delete your spams, it's getting annoying, i am the one who originally posted it, what right do you have to come and take it for your own?
Click to expand...
Click to collapse
Really. So like ........
.
Related
The procedure is quite simple.
Step 1.
Download the following tools:
Cyanogen Mod 7.1 for Xperia X8 (code named Shakira)
FlashTool
FXP030 kernel (2.6.29)
Step 2.
Step 2.1
Follow the guide located here to unlock your bootloader, do this before continuing with the rest of this guide it is important to have your stock firmware rooted for this step.
Step 2.2
Unzip flashtool to its own folder e.g. /Flashtool/.
Unzip FXP030 kernel to the Flashtool/firmwares/ folder - the directory should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 3.
Step 3.1
Open Flashtool and click on the 'Flash' button, select the FXP firmware from the list on the left hand side and click OK.
Step 3.2
Follow the on screen instructions.
Step 4.
Copy the update-cm-7.1.0-X8-signed.zip to the root of your MicroSD Card as shown below. (Please note that you can do this using a MicroSD Card reader OR your USB cable.
If you do not have a card reader then switch your phone on after flashing the FXP kernel and when you see the FreeXperia logo, repeatedly press the Back button until CWM loads. Once CWM has loaded scroll down to the Mounts and Storage menu. Once on the mounts and Storage menu scoll down to mount USB Storage and copy the update-cm-7.1.0-X8-signed.zip file to the root of the SD card.
Step 5.
Load CWM via the method described in Step 4 and select 'Install Zip from SD card.' then select 'Choose Zip from sdcard' and select the update-cm-7.1.0-X8-signed.zip that you copied over to the root of the SDCard in the previous step, Select the yes option using the volume buttons and let CWM work its witchcraft.
Step 6.
Go back to the main menu of CWM and select 'wipe data/factory reset'.
Next from the main menu of CWM select 'wipe cache partition'.
Finally from the main menu of CWM select 'Advanced' and 'wipe dalvik cache.
Optional
If you want the google apps installed you can download them here. To install them perform Step 4 through to Step 5 and instead of copying 'update-cm-7.1.0-X8-signed.zip' to the root of your sdcard, copy gapps-gb-20110613-signed.zip instead. All instructions in Step 4 and Step 5 that state you should use 'update-cm-7.1.0-X8-signed.zip' should use the file 'gapps-gb-20110613-signed.zip' instead.
Notes:
I'm having issues with the networking with this custom firmware, specifically the network (3G or WiFi) seems to 'drop' after any amount of small usage. If I use a Browser or the Market place for a short amount of time, they simply end up unable to load any pages whilst android reports that wifi/3g signal strengths are full. I tested the connectivity using ping commands from terminal and pings are succesfull. I'm unsure where the issue lies. I suspect however the issue is in the FXP Kernel, some people have reported using FXP 028 Kernel resolves the issues but I've been unable to find them.
Anyway I hope this helps people who are confused as to how to install this.
Credits:
Thanks to Paschalis for correcting an error in my wording.
Thanks go to dbts25 for pointing out mistakes and un-neccessary steps in the guide, sincethen the guide has been edited to be easier to follow and less convoluted.
Thanks go to rav3n_pl for the revised bootloader bundled with the kernel.
Vanilla is the AOSP, Android Open Source Project..
You mean stock, right?
Btw this kernel has wifi issues?
Tried many kernels, and wifi wont open with none of them..
Paschalis said:
Vanilla is the AOSP, Android Open Source Project..
You mean stock, right?
Btw this kernel has wifi issues?
Tried many kernels, and wifi wont open with none of them..
Click to expand...
Click to collapse
Ah Yes, I mean stock. It's 2:34am... That's my excuse haha, between university and sleep deprivation the mistakes keep mounting hehe. Thanks for pointing that out anyways.
And yes, it seems this kernel has issues with data connectivity, and call volume as well for some odd reason. It boggles the mind as to why it's been labelled 'stable'. Stable usually means it's solid and won't fall over and die, plus data connectivity on an android handset is really a critical feature, if it is buggy the custom firmware should not be labelled as stable.
It really need custom kernel?
Hehe.. Same university thing here, only difference here its 4:40, and got lesson at 8:30..
On my other phone, CM is beta and not Official yet, and its working perfectly, except 2 special features they didnt port yet, from stock rom..
If you find the 28 kernel, post it, until they release the 31!
Thanks!
EL_BELLACO said:
It really need custom kernel?
Click to expand...
Click to collapse
Yes, if you don't use a custom firmware it will get stuck in a boot loop and be unable to boot.
Paschalis said:
Hehe.. Same university thing here, only difference here its 4:40, and got lesson at 8:30..
On my other phone, CM is beta and not Official yet, and its working perfectly, except 2 special features they didnt port yet, from stock rom..
If you find the 28 kernel, post it, until they release the 31!
Thanks!
Click to expand...
Click to collapse
If I come across it I will, I'll edit my guide to feature it as a work around for connectivity issues for people in the meantime, if it works correctly.
I've got to admit though, issues aside - it is amazing what the open source community is capable of creating. CM 7.1 looks absolutely fantastic, I love the boot animation.
I have tried FXP028, FXP030 and the one that is included with the CM7.1 release, i'm having network problems with all of them.
termin8tor said:
.
Step 5.
Turn your phone on and repeatedly press the back button until you are displayed with the CWM menu. On this menu select 'install zip from sdcard' and then choose the 'choose zip from sdcard' select the cyanogenmod file you downloaded and let it do its thing.
Click to expand...
Click to collapse
In step 5 you forgot one thing:
Flash Google Apps. You can find it here: http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip
Step 2 is unnecessary, because CWM Recovery is built-in FXP Kernel so you don't need to install it.
poisike said:
I have tried FXP028, FXP030 and the one that is included with the CM7.1 release, i'm having network problems with all of them.
Click to expand...
Click to collapse
Can you please share the FXP028 kernel?
has any of you tried the dx kernel yet? with cynanogen mod 7.1
No workie. Rom+kernel need match.
An I wrote it that way:
http://forum.xda-developers.com/showpost.php?p=18364335&postcount=1879
dbts25 said:
In step 5 you forgot one thing:
Flash Google Apps. You can find it here: http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip
Step 2 is unnecessary, because CWM Recovery is built-in FXP Kernel so you don't need to install it.
Click to expand...
Click to collapse
I've edited the guide to eliminate that pointless step in the original guide version, thankyou for pointing it out!
Additionally the google apps step has been added to the end of the tutorial.
tonks22 said:
has any of you tried the dx kernel yet? with cynanogen mod 7.1
Click to expand...
Click to collapse
Unfortunately the rom will not boot with the DX kernel, I tried it myself and it gets stuck in a boot loop.
rav3n_pl said:
No workie. Rom+kernel need match.
An I wrote it that way:
http://forum.xda-developers.com/showpost.php?p=18364335&postcount=1879
Click to expand...
Click to collapse
I have included the correct kernel for the official cyanogenmod 7.1 rom and slipstreamed your edited loader into the kernel package for peoples convenience. Thanks for linking me to your post!
Hope this helps people!
It seems that this Rom and kernel [cm7] doesn't work.When i flash the kernel my SD is not recognized.And if i uninstall the kernel and try to flash the rom...i get a biiiiigg eror
i hope that they will also make a ROM that is compatible with stock kernel so that it will be easy to install... im having second thought of unlocking my bootloader because of this:
Before I start I must emphasise the fact that meddling with the bootloader is highly dangerous and will result in a hard brick if you don't follow proper instructions. Then, you will have to go and repair your phone by sending it to SE . I am not responsible if your phone dies on you because you didn't follow instructions or you screwed up somehow. I must also mention that this will probably void your warranty (rooting already probably voided it though) and that there is NO WAY to relock bootloader as of now.
Click to expand...
Click to collapse
i know they can make one because they are great programmer...
if you have bought your phone unlocked, things are pretty simple..
That tutorial, should be writtenmore clearly/easy..
Cos in fact its not too dificult..
Sent from my MB860 using XDA App
Paschalis said:
if you have bought your phone unlocked, things are pretty simple..
That tutorial, should be writtenmore clearly/easy..
Cos in fact its not too dificult..
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
yes i bought my phone from SE and its already unlocked... i think i'll try it when this ROM will be released as a completely working ginger without bugs...
i find this http://forum.xda-developers.com/showthread.php?t=1254225
as very informative but confusing tutorial... is there any other short and simple tutorial here??
mikel_0004 said:
yes i bought my phone from SE and its already unlocked... i think i'll try it when this ROM will be released as a completely working ginger without bugs...
i find this http://forum.xda-developers.com/showthread.php?t=1254225
as very informative but confusing tutorial... is there any other short and simple tutorial here??
Click to expand...
Click to collapse
There:
http://forum.xda-developers.com/showpost.php?p=17656148&postcount=1
Can it be installed WITHOUT unlocking the bootloader?
Thanks
thu001 said:
Can it be installed WITHOUT unlocking the bootloader?
Click to expand...
Click to collapse
I`m not 100% sure that cm71 rom will work on stock kernel...
When I flashed it under installed CM7 it stuck on bootanimation. Mybe full wipe? Not tried.
Hello
I installed on my Xperia X8 CM7.1 (I had version 2.1 of Android root), but it does not work the WiFi network and the 3G connection is disconnected, it did not work properly Market (having installed the GAPPS). My question, is there any way to get back to my terminal to android 2.1? I did a Back up of my system, but in trying to restore from CWM mistake I make, I guess it is for the kernel.
Hi
As I struggled a bit, here's how to root the HTC One M8 Dual SIM.
Disclaimer
As always, if you **** your phone up, it's not my fault. Don't blame me. Further, I will not answer any questions about this. Please help yourself.
Please use the "Thanks" ( :good: ) button if you just want to say "Thank you" or "Great" or "I wanna marry you".
Prerequisites
HTC One M8 Dual SIM (m8_dugl)
A complete backup of your phone! (e.g. with titanium backup)
fastboot installed
USB Cable
Some time (do not hurry!)
htc DEV UNLOCK (http://www.htcdev.com/bootloader/unlock-instructions)
Warning
Make sure you have a "m8_dugl" device:
Reboot your device to the bootloader (POWER+VOLUME_UP until the screen blacks out, then POWER+VOLUME_DOWN). If it reads there something different than "m8_dugl", then this guide is not for you!
Steps
Download the custom recovery "TWRP" from here: https://s.basketbuild.com/devs/Captain_Throwback/One (M8)/ALL/Recovery (See hint below)
Download "UPDATE-SuperSU-vX.XX.zip" from here: http://download.chainfire.eu/supersu
Copy "UPDATE-SuperSU-vX.XX.zip" to you phone's internal SD
--> Until now no harm has been done to you device but DEV UNLOCK. So this would also be a good time to do a BACKUP! #JustSaying
Open a command prompt and navigate to your fastboot executable.
Put your phone into fastboot mode: POWER+VOLUME_UP until the screen blacks out, then press POWER+VOLUME_DOWN. You see some options soon. Use the volume buttons to navigate, the power button to perform the selected action. Select FASTBOOT and press the POWER button.
Connect you phone to the PC
Type "./fastboot boot path/to/where/you/saved/TWRP_Recovery_x.x.x.x_M8_CPTB.img"
If boot does not work, you can flash the recovery to your phone. But remember: When you do a stock update, you must revert back to a stock recovery!
Do flash the custom recovert, type "./fastboot flash recovery path/to/where/you/saved/TWRP_Recovery_x.x.x.x_M8_CPTB.img"
Touch "Install"
Select the "UPDATE-SuperSU-vX.XX.zip" file
Swipe to start
Touch Reboot System.
You're phone should be rooted.
** Hint **
If the newest TWRP does not work, try a different one.
If none of them work, try the official one: http://teamw.in/project/twrp2/225
If the official TWRP does not work for you, you can try the following one, but it's rather old: http://forum.xda-developers.com/htc...al-sim-european-version-t2816991/post54258731
****
Cheers,
Chris
PS: @donmarkoni provided some resources that might be useful to you. See his post: http://forum.xda-developers.com/showpost.php?p=56134225&postcount=12
Changelog:
[2015-01-18] Updated parts that do not work anymore. Made version numbers generic.
[2014-10-20] a) I have been hinted that the official TWRP should work for the m8_dugl as well. b) The current version of SuperSU is v2.14 and works well. c) @donmarkoni provided some more resources worth mentioning.
cimnine said:
Hi
As I struggled a bit, here's how to root the HTC One M8 Dual SIM.
Disclaimer
As always, if you **** your phone up, it's not my fault. Don't blame me. Further, I will not answer any questions about this. Please help yourself.
Prerequisites
HTC One M8 Dual SIM (m8_dugl)
fastboot installed
USB Cable
Some time (do not hurry!)
htc DEV UNLOCK (http://www.htcdev.com/bootloader/unlock-instructions)
Note: Reboot your device to the bootloader (POWER+VOLUME_UP until the screen blacks out, then POWER+VOLUME_DOWN). If it reads there something different than "m8_dugl", then this guide is not for you!
Steps
Download the custom recovery from here: http://forum.xda-developers.com/htc...al-sim-european-version-t2816991/post54258731 (It must be made for the m8_dugl, the 'normal' m8 recoveries from TWRP/CWM do not work (yet)!)
Download "UPDATE-SuperSU-v2.02.zip" from here: http://download.chainfire.eu/supersu
Copy "UPDATE-SuperSU-v2.02.zip" to you phone's internal SD
Open a command prompt and navigate to your fastboot executable.
Put your phone into fastboot mode: POWER+VOLUME_UP until the screen blacks out, then POWER+VOLUME_DOWN. Now you see some options. Use the volume buttons to navigate, the power button to perform the selected action. (Just select FASTBOOT and press the POWER button.)
Connect you phone to the PC
Type "./fastboot boot path/to/where/you/saved/m8-dual-twrp.img"
--> Until now no harm has been done to you device but DEV UNLOCK. So this would also be a good time to do a BACKUP! #JustSaying
Touch "Install"
Select the "UPDATE-SuperSU-v2.02.zip" file
Swipe to start
Touch Reboot System.
You should be rooted.
I did not test that yet, but this method should not prevent you from receiving OTAs. But I won't vouch for that.
Cheers,
Chris
Click to expand...
Click to collapse
Thank you Chris,
step by step guides are always helpful, as the answer a lot of questions about the whole procedure. So I´m at least rooted now. Let´s see if OTA´s will work, but they can also be installed via adb. I prefer having a custom recovery for installs and making backups from data, so this solution is the one I need (and always used before btw).
Thank you !
Guido
thanks alot i hope xda opening section for us HTC-M8 Dual Sim Owners
[deleted]
guidogsbn said:
Thank you Chris,
step by step guides are always helpful, as the answer a lot of questions about the whole procedure. So I´m at least rooted now. Let´s see if OTA´s will work, but they can also be installed via adb. I prefer having a custom recovery for installs and making backups from data, so this solution is the one I need (and always used before btw).
Thank you !
Guido
Click to expand...
Click to collapse
Hi
I hope you will tell us if the OTA will work.
By the way, do you know of unlocking the bootloader with HTC Dev create any issue for the future OTA?
Cheers
TBH
Sent from my HTC One_M8 dual sim using Tapatalk
thebighunt said:
Hi
I hope you will tell us if the OTA will work.
By the way, do you know of unlocking the bootloader with HTC Dev create any issue for the future OTA?
Cheers
TBH
Sent from my HTC One_M8 dual sim using Tapatalk
Click to expand...
Click to collapse
With re-locked bootloader and stock recovery OTA will work:good:
guidogsbn said:
With re-locked bootloader and stock recovery OTA will work:good:
Click to expand...
Click to collapse
Thanks
I'm still with the stock recovery
TBH
Sent from my HTC One_M8 dual sim using Tapatalk
Stuck in a boot loop
Hi,
thanks for the guide and it worked perectly. No problems all day long after rooting the phone.
But since this morning I am stuck in a boot loop! Already tried factory reset, that works at first, after the phone is loading some updates, it is running into a boot loop
Is there anything I can do?
Rgds
Volker
Edit: Updated SuperSu, Works again...
m8 update ?
any1 knows if we are ever gonna get updates like regular m8 ? , i am still waiting on the root thing hoping they will update ,
any1 have any information or should i go ahead and root ? , is the performance better after rooting and removing all that bloatware or no significant difference ?
last question plz , does xposed module work with this phone and sense 6 toolbox use in android revolution hd rom ?
i tried asking million times here and and htc and called them and chatted online with them and all says they have no information and only 1 source ( august-sept ) under testing ,, so thats why i am asking plz if any1 knows anything , or can u advice me what to do ?!! cuz my phone sucks compared to my friends regular updated stock m8 in every aspect , sound , performance , battery , benchmarks , ......etc
aymanzz said:
any1 knows if we are ever gonna get updates like regular m8 ? , i am still waiting on the root thing hoping they will update ,
any1 have any information or should i go ahead and root ? , is the performance better after rooting and removing all that bloatware or no significant difference ?
last question plz , does xposed module work with this phone and sense 6 toolbox use in android revolution hd rom ?
i tried asking million times here and and htc and called them and chatted online with them and all says they have no information and only 1 source ( august-sept ) under testing ,, so thats why i am asking plz if any1 knows anything , or can u advice me what to do ?!! cuz my phone sucks compared to my friends regular updated stock m8 in every aspect , sound , performance , battery , benchmarks , ......etc
Click to expand...
Click to collapse
I read somewhere that our dual sim should get directly Android L and until then no update. Xposed module, sense 6 and Wanam Xsense are working good, of course u need to be rooted
FYI - You might want to update this guide to point to the official TWRP for M8 now that it supports Dual SIM.
cimnine said:
Hi
As I struggled a bit, here's how to root the HTC One M8 Dual SIM.
...
Cheers,
Chris
Click to expand...
Click to collapse
@cimnine, I'll leave these links here for you to put in the OP and for the other guys to have at hand:
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Radio_1.18.30306251.05G_30.57.306251.00L_release_381655_combined_signed.zip 1.40 GB
2014-07-26--03-35-20 KOT49H release-keys.zip 1.45 GB
M8_dugl_preload.zip 89.5 MB
m8_dugl_stock_recovery_1.45.401.12.img 13.6 MB
0P6BIMG_M8_TWRP_Recovery_2.8.0.5_CPTB 12.50 MB Thanks to @Captain_Throwback
OTA_M8_DUGL_K444_SENSE60_MR_HTC_Europe_3.33.401.6-1.45.401.12_R_release_3986927s90q9xyzwqo8q8g.zip
Cheers!
donmarkoni said:
@cimnine, I'll leave these links here for you to put in the OP and for the other guys to have at hand:
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Radio_1.18.30306251.05G_30.57.306251.00L_release_381655_combined_signed.zip 1.40 GB
2014-07-26--03-35-20 KOT49H release-keys.zip 1.45 GB
M8_dugl_preload.zip 89.5 MB
m8_dugl_stock_recovery_1.45.401.12.img 13.6 MB
0P6BIMG_M8_TWRP_Recovery_2.8.0.5_CPTB 12.50 MB Thanks to @Captain_Throwback
Cheers!
Click to expand...
Click to collapse
No need to post my TWRP here - the official one works fine.
Captain_Throwback said:
No need to post my TWRP here - the official one works fine.
Click to expand...
Click to collapse
OK, I will remove if you want me to, but most of the credit goes to you for unified TWRP, working MTP and UMS.
donmarkoni said:
@cimnine, I'll leave these links here for you to put in the OP and for the other guys to have at hand:
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Radio_1.18.30306251.05G_30.57.306251.00L_release_381655_combined_signed.zip 1.40 GB
2014-07-26--03-35-20 KOT49H release-keys.zip 1.45 GB
M8_dugl_preload.zip 89.5 MB
m8_dugl_stock_recovery_1.45.401.12.img 13.6 MB
0P6BIMG_M8_TWRP_Recovery_2.8.0.5_CPTB 12.50 MB Thanks to @Captain_Throwback
Cheers!
Click to expand...
Click to collapse
@donmarkoni: i posted this question in the stock recovery thread but got no reply...
i have downloaded the mega file 0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Ra.... 2 times before and tried winzip, 7-zip and winrar but zip file is corrupt. is this a new file? i cant see an md5 or sha. size of my download from windows properties is 1,506,353,851 bytes.
have you checked the file?
the '2014-07-26--03-35-20 KOT49H release-keys.zip' is a clean TWRP backup?
i have made my own backup by temp installing TWRP 2.8 so can also confirm that works (thanks again Captain_Throwback)
any sign of an original RUU yet?
Stepp said:
I read somewhere that our dual sim should get directly Android L and until then no update. Xposed module, sense 6 and Wanam Xsense are working good, of course u need to be rooted
Click to expand...
Click to collapse
See that table from http://android-revolution-hd.blogspot.ch/2014/10/htc-devices-to-receive-android-50.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
guidogsbn said:
With re-locked bootloader and stock recovery OTA will work:good:
Click to expand...
Click to collapse
That's why I usually don't install the recovery but only boot it. We'll see in Spring 2015 if it works, it seems that we won't get an update any sooner.
PS: Can some moderator remove the 5 Minutes Wait restriction from my account? I'm not exactly new to XDA, am I?
gazzacbr said:
@donmarkoni: i posted this question in the stock recovery thread but got no reply...
i have downloaded the mega file 0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Ra.... 2 times before and tried winzip, 7-zip and winrar but zip file is corrupt. is this a new file? i cant see an md5 or sha. size of my download from windows properties is 1,506,353,851 bytes.
have you checked the file?
the '2014-07-26--03-35-20 KOT49H release-keys.zip' is a clean TWRP backup?
i have made my own backup by temp installing TWRP 2.8 so can also confirm that works (thanks again Captain_Throwback)
any sign of an original RUU yet?
Click to expand...
Click to collapse
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12.....signed.zip is a encrypted signed zip, as the file name suggests. It does work, as you can see here. All other files are good too. That's all I can say about it, as I don't have that phone, I was just helping.
cimnine said:
That's why I usually don't install the recovery but only boot it. We'll see in Spring 2015 if it works, it seems that we won't get an update any sooner.
PS: Can some moderator remove the 5 Minutes Wait restriction from my account? I'm not exactly new to XDA, am I?
Click to expand...
Click to collapse
Maybe earlier with 4.4.4 as LLabTooFer4 posted on twitter :
LlabTooFeR @LlabTooFeR 30. Sep.
M8 Dual SIM users don't be disappointed not getting 4.4.3, you will get 4.4.4 before the end of October
:good:
donmarkoni;...encrypted signed zip...That's all I can say about it said:
Ok, thanks for info. Looks like at least one user had success with it so i will keep it in a safe place
Click to expand...
Click to collapse
it's finally released for our z3c!!!
http://get.aospa.co/official/aries
I believe need to unlock bootloader first before flashing so take note.
AWESOME!!! Thanks for the information!
Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
juliopw said:
Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
Click to expand...
Click to collapse
I actually have no idea what to do. I'm on a locked bootloader and I have never unlocked and flashed a custom rom on my z3c.
Was just, sharing some info and hoping people would test
matthiastan5 said:
it's finally released for our z3c!!!
http://get.aospa.co/official/aries
I believe need to unlock bootloader first before flashing so take note.
Click to expand...
Click to collapse
Thanks for info.
For anyone who already running this rom, how is it? Does the baseband and camera work (no fisheye effect)?
Arch9 said:
For anyone who already running this rom, how is it? Does the baseband and camera work (no fisheye effect)?
Click to expand...
Click to collapse
Neither one nor the other. All other things seems working fine.
juliopw said:
Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
View attachment 3786599
Click to expand...
Click to collapse
I get the same error 7 when trying to install PA. Ive tried modefying the install-script as you did but then i get error 6.
I flashed stock D5803_23.5.A.0.575_R11D_Nordic Generic_1288-5411.ftf and then flashed recovery to TWRP via fastboot but i still get the same error 7 when trying PA after that.
My next attempt is to install that NUT dual recovery and try flash PA after that.
Camera and modem not working
Got it installed (finally...). You need a working TWRP recovery.
What's working:
- WiFi
- Paranoid OTA seems to work; no further build available to try (doubt that it will work without recovery though; see below)
Not working:
- RIL (so no phone or SMS)
- camera
BT and GPS not tested yet.
To be able to flash you need to
- modify updater-script located in META-INF/com/google/android/updater-script (which is actually a text file) of the ROM zip
- open it in a text editor
- replace "aries" with "z3c", save it somewhere (delete .txt if it's saved with this extension; filename must be "updater-script")
- open the zip with 7zip (recommended; dunno if it works with other archivers)
- replace the updater-script with your version in the zip
- place the zip onto your device
- enter recovery
- Factory Reset (no need for a full wipe)
- flash it
- flash MM Gapps directly afterwards (OpenGapps not recommended - use Slim Zero Gapps instead)
- if you want root, flash SuperSU BEFORE rebooting (see below)
Recovery will be lost and can't be installed with TWRP Manager or Rashr after flashing (Didn't work for me - please report if you got it working and if so - how. Maybe with fastboot, didn't try that yet)
Happy flashing...
I'm sure issues will be fixed quite fast in later builds as everything works already in latest Carbon ROM (find it on testing.myself5.de). Maybe @Myself5 can help with that...(?).
juliopw said:
Camera and modem not working
View attachment 3786769View attachment 3786770View attachment 3786771View attachment 3786772
Click to expand...
Click to collapse
I flashed and it's same with you.It's not okay for daily driver.Also it overheats a lot.
Nice, they said they already fixed the mobile radio bug internally and will be releasing a new build soon
radio is fixed and currently fixing camera
From PA's official Google+ post:
We are also announcing that with the help of Sony and their Open Devices Project we will be able to support all 22 Xperia devices on the SonyXperiaDev GitHub Instance. This initial Sony release is for the Shinano family, but the Rhine, Yukon and Kitakami platforms are expected to follow shortly. This is really exciting news for us and it allows us to give you the Android experience we all love on a much wider range of devices.
Click to expand...
Click to collapse
If this is the case, maybe the camera will actually be usable? What do you think guys?
P.S. We should contact a moderator to move this thread to General forums, this is not development.
where is the zip file ?
ultraaslan88 said:
where is the zip file ?
Click to expand...
Click to collapse
It's removed for the meantime
That's because it had so many bugs
Wait for some more days for a better build
Anyone have mirror for last version?
Can i flash this rom on my z3c with SliMM 1.9?
GabrielVacker said:
Can i flash this rom on my z3c with SliMM 1.9?
Click to expand...
Click to collapse
You need unlocked bootloader for this
dont Found file
Wysyłane z Compacta za pomocą Tapatalk 2
This thread is for Lenovo Vibe P1 and NOT for P1m
Code:
*I am not responsible for bricked devices, dead SD cards, thermonuclear war.
First of all im just a user, who want to help others, i am NOT the maker/creator of these files.
Root and first TWRP recovery:
This method will work if your phone is on latest rom / S288 / maybe its work on older rom, BUT i dont test it.
1. You need download Lenovo driver and install it.
2. Get the QFIL/QPST and install it too.
3. Download the P1a42_S288... zip and unzip to your desktop.
4.Go in your Developer options /Tap 7 times build number/ and allow OEM unlock and USB debugging.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
5. You need download Supersu and put it in your INTERNAL storage root folder.
6.Shut down your device / phone/, press Volume + and connect to the pc via USB
7. Your windows give sounds for a new device, u go in Device manager /and in QFIL too/ and u will see the qualcomm hs-usb qdloader 9008.
Click to expand...
Click to collapse
8.Open your QFIL and press the first BROWSE and choose prog_emmc_firehose_8936.mbn from the unzipped folder.
Click to expand...
Click to collapse
9. Choose Load xml and choose rawprogram0_aboot+twpr and then patch0.
Click to expand...
Click to collapse
10. Press the blue Download button and it will start.
Click to expand...
Click to collapse
11. That is not all!!! Your phone will reboot BUT u need to press 3/ i mean volume + , - and power / button for 10 second if it start reboot, or your phone will reboot in Android, and u will get again stock recovery.
12.A If you havent TWRP u need start it again from step 6.
12.B If you have TWRP swipe the trigger to right and confirm the first ask.
13. Go to install and search your Supersu and flash it.
14. Wipe your dalvick cache and normal cache and reboot your phone.
15. The first reboot will take a long time / 10 minute was for me / dont restart, let it work.
16. If you do everything good, have now a ROOTED phone.
P1C72/C58 root method if u are on vibeUI rom.
You have to do the same like the top one, but u have to download this one
And use rawprogram-flashj_rec instead of rawprogram0_aboot+twpr
If it work for you, please hit the Thanks button or send me a beer via paypal.
Very good English not bad at all, anyway when you do the first part does that mean TWRP is only temporary ? and the second part makes TWRP permanent what is the third part for ?
karlzberg said:
Very good English not bad at all, anyway when you do the first part does that mean TWRP is only temporary ? and the second part makes TWRP permanent what is the third part for ?
Click to expand...
Click to collapse
1. make a permanent twrp, u can root your phone with this twrp / and supersu/ for use stock rooted rom.
2. and 3. is for custom roms, with the 1. twrp u cant flash custom roms, thats why u need this twrps, one is a chinese twrp and one is kyo's recovery what i use every time.
. I already have done part one from the other thread but this is good to know thank you.
@suryavamsi6
I have a P1 c72, if I flash P1a42_S288... zip , will NFC work? I have a sensor for glucose, freestyle libre, working with NFC so this is an important point for me. Regards
MOBUTU90 said:
I have a P1 c72, if I flash P1a42_S288... zip , will NFC work? I have a sensor for glucose, freestyle libre, working with NFC so this is an important point for me. Regards
Click to expand...
Click to collapse
If i know it right, yes thats work perfectly for my friend.
I have a p1c58 (2gb ram 16 gb storage) bought from China. Is this procedure suitable for p1c58 too? Thanks
coolman7 said:
I have a p1c58 (2gb ram 16 gb storage) bought from China. Is this procedure suitable for p1c58 too? Thanks
Click to expand...
Click to collapse
Didnt tried, but the cpu and something are same, so u can try it.
Starchm said:
Didnt tried, but the cpu and something are same, so u can try it.
Click to expand...
Click to collapse
Is there any risk to damage or brick the phone?
Thanks
coolman7 said:
Is there any risk to damage or brick the phone?
Thanks
Click to expand...
Click to collapse
Yes it can, but on forums u csn search some backup rom
[ROM][7.1.1]Android Ice Cold Project 12.1
Hey Guys, I have got a big problem here. I had installed the latest release dated 28th Jan (link given by one of the developers). I had upgraded my TWRP to 3.0.2-0 then i installed the rom zip and the gapps zip. At first time it booted up normally without any bugs and all. However after next boot onwards i started getting many background app crashes so i decided to revert back to the TWRP backup which i had made on newly upgraded TWRP just before installing this rom. I had taken backup and then wiped everything to install.
After i restored with no errors i am stuck in boot loop. I mobile restarts and then holds on the boot animation and the vibrates and restarts again. This happens endlessly. I tried to re-wipe everything and restore but it didn't help. I tried to wipe everything and reinstall this rom again but now mobile turns up upto aicp boot animation and the screen turns off and only blue led indication comes on.
I have tried almost everything in laslt 24 hours but no way did anything. Am still stuck at endless bootloop.
This is all that i tried.
1. I tried to flash ROM S288 using QFIL : bootloop
2. I tried to flash ROM S285 using QFIL: bootloop
3. I tried to change partition from ext4 to fat and then back to ext4 for system and data and then restore twrp backup : Bootloop
4. I tried to change partition from ext4 to fat and then back to ext4 for system and data and then install aicp installable zip with gapps :stuck after boot animation with screen off and blue led on.
5. I erased all the partitions and formated all internal partitions as signle ext4 file system (29GB size) and then download stock rom with stock recovery using QFIL. : Bootloop.
There is only way i can stop bootloop and that is i force it to boot in recovery mode (stock/twrp). In either of the recovery mode it boots up and works normally. But irreespective of any rom i try to install it always ends up in bootloop. There is something that it is looking for just after boot animation which it is not able to find after boot animation and hence it boots again. I am not sure what it is looking for so i tried to erase every partition and restore that by downloading stock rom using qfil both lolipop and marshmallow version but still no use.
Please guys tell me what can be done now. its been over 24 hrs am struggling and i guess i already did everything i knew. Now i need your help.
Hey guys a new query here. Your expert opinion is required.
Check this attached screenshot.
I have range of both the networks. IMEI is also my original IMEI. But baseband is unknown. I remember baseband had some value. Why is it unknown now. Any idea?
Is there anything abnormal to worry or shall I ignore it?
Can anyone get me downloaded this p1c72 Vibe UI rom file from chinese website https://pan.baidu.com/s/1qXyzyX2. Please if anyone can please reply.
mity_dev said:
Can anyone get me downloaded this p1c72 Vibe UI rom file from chinese website https://pan.baidu.com/s/1qXyzyX2. Please if anyone can please reply.
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic
Translate this Russian language and look for vibe ui. What you are looking for is there.
Hey Guys
Today i have intentionally hard bricked my own Lenovo Vibe P1 (P1a42) just to demonstrate you all how to recover the dead (hard bricked) qualcomm devices.
This process is more or less same for all the qualcomm devices. In some devices other steps may be needed where you will have to wipe entire ROM space and make a single partition of ExFAT format.
https://youtu.be/ZU1vu5diGsE
Well i have tried to make the video in such a way that i include more or less everything possible. Please bare with me.
Further Readings and reference:
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
can u please tell me which zip i have to download for putting in QFIL the link provided is having 7 downloads
[email protected] said:
can u please tell me which zip i have to download for putting in QFIL the link provided is having 7 downloads
Click to expand...
Click to collapse
P1a42_S288_160721_ROW_RAW_QFIL
Starchm said:
P1a42_S288_160721_ROW_RAW_QFIL
Click to expand...
Click to collapse
thanks , i have another problem i cant understand the steps after 11 can anybody explain them to me better .
11. That is not all!!! Your phone will reboot BUT u need to press 3/ i mean volume + , - and power / button for 10 second if it start reboot, or your phone will reboot in Android, and u will get again stock recovery.
12.A If you havent TWRP u need start it again from step 6.
12.B If you have TWRP swipe the trigger to right and confirm the first ask.
13. Go to install and search your Supersu and flash it.
14. Wipe your dalvick cache and normal cache and reboot your phone.
15. The first reboot will take a long time / 10 minute was for me / dont restart, let it work.
16. If you do everything good, have now a ROOTED phone.
Click to expand...
Click to collapse
lenovo vibe p1a42 with s288 row root device on ubuntu
Please anybody help in rooting my device lenovo vibe p1a42 with s288 row on ubuntu os
Thanks,
Sampath
Hello!
I bought an SM-N910G on ebay recently. The stock rom is a little bit slow and I would like to flash lineage or something else.
When i try to flash the latest version of twrp with odin it passes and shows the splash screen with the logo and version (all normal) but doesnt load and reboots to Android.
Does anyone have any ideas? ive tried most things that i found online but nothing works. the first available version on the twrp website does flash and work but wont flash latest lineage.
del32 said:
Hello!
I bought an SM-N910G on ebay recently. The stock rom is a little bit slow and I would like to flash lineage or something else.
When i try to flash the latest version of twrp with odin it passes and shows the splash screen with the logo and version (all normal) but doesnt load and reboots to Android.
Does anyone have any ideas? ive tried most things that i found online but nothing works. the first available version on the twrp website does flash and work but wont flash latest lineage.
Click to expand...
Click to collapse
Which bootloader is active?
So 3.6.2-9-0 doesn't start?
Tried flashing that .img using old TWRP as well or only .tar with Odin?
What did 3.1.0-0 say when flashing LOS fails?
bmwdroid said:
Which bootloader is active?
So 3.6.2-9-0 doesn't start?
Tried flashing that .img using old TWRP as well or only .tar with Odin?
What did 3.1.0-0 say when flashing LOS fails?
Click to expand...
Click to collapse
sorry i am not sure what you mean by which bootloader is active, is there a way to check this?
Nope, it just loads on the splash screen for a while then boots back to android
I have tried old twrp to flash and odin tar
It said an error about this rom is for *phone* you are using blank or something along those lines.
Afaik 3.5(?) is the only one that can install past oreo roms
del32 said:
sorry i am not sure what you mean by which bootloader is active,
is there a way to check this?
Click to expand...
Click to collapse
That's the one from the stock firmware you came from.
Should be the latest stock possible.
Did you check or can you tell?
del32 said:
Nope, it just loads on the splash screen for a while then boots back to android
I have tried old twrp to flash and odin tar
It said an error about this rom is for *phone* you are using blank or something along those lines.
Click to expand...
Click to collapse
Can you provide a screenshot?
del32 said:
Afaik 3.5(?) is the only one that can install past oreo roms
Click to expand...
Click to collapse
Well mine is on 3.6.1_9-0 and currently on Havoc 4.16 I got from the telegram group.
Has of course the battery drain problem (like all A11 custom versions for this device) when shut down.
With that TWRP I've installed A11 versions of LOS, crDroid and Havoc mulitple times.
bmwdroid said:
That's the one from the stock firmware you came from.
Should be the latest stock possible.
Did you check or can you tell?
Can you provide a screenshot?
Well mine is on 3.6.1_9-0 and currently on Havoc 4.16 I got from the telegram group.
Has of course the battery drain problem (like all A11 custom versions for this device) when shut down.
With that TWRP I've installed A11 versions of LOS, crDroid and Havoc mulitple times.
Click to expand...
Click to collapse
im using the latest 6.0.1 australia optus firmware (im australian and on optus)
there were bootloader files there available there for download but i dont think they worked for me. and also gave me no service in android
I am currently at school, so i will be able to provide a screenshot later
should i try a different stock firmware version/ different country carrier when i get home?
del32 said:
im using the latest 6.0.1 australia optus firmware (im australian and on optus)
Click to expand...
Click to collapse
So that should be ok.
del32 said:
...
should i try a different stock firmware version/ different country carrier when i get home?
Click to expand...
Click to collapse
No idea if that wil do any good or even harm your device.
I know that on some that works but idk about yours.
Perhaps it will help to start from scratch flashing the latest stock if available via samfirm_reborn_3.6.3 (gets it directly from Samsungs servers).
bmwdroid said:
So that should be ok.
No idea if that wil do any good or even harm your device.
I know that on some that works but idk about yours.
Perhaps it will help to start from scratch flashing the latest stock if available via samfirm_reborn_3.6.3 (gets it directly from Samsungs servers).
Click to expand...
Click to collapse
I'll try samfirm_reborn_3.6.3
currently installing the files it needs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@del32 which files?
Didn't need any additional ones on my W11 system.
SamFirm_Reborn itself starts directly without installation.
Took it from here:
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
bmwdroid said:
@del32 which files?
Didn't need any additional ones on my W11 system.
SamFirm_Reborn itself starts directly without installation.
Took it from here:
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
not sure what it needed but i just installed anyways and it all worked
used the same github link
also now in twrp, getting error 1 got a screenshot
del32 said:
not sure what it needed but i just installed anyways and it all worked
used the same github link
also now in twrp, getting error 1 got a screenshot
Click to expand...
Click to collapse
Well your device is trltedt so ROM should fit.
Which TWRP right now?
Did updaing it work?
You did "Format data" after wiping?
Tried with 2nd download of that ROM?
Tried crDroid or Havoc?
Once when I had flashing problems I changed filesystem of several partitions to and fro which helped.
If that all doesn't help I'ld start from scratch.
bmwdroid said:
Well your device is trltedt so ROM should fit.
Which TWRP right now?
Did updaing it work?
You did "Format data" after wiping?
Tried with 2nd download of that ROM?
Tried crDroid or Havoc?
Once when I had flashing problems I changed filesystem of several partitions to and fro which helped.
If that all doesn't help I'ld start from scratch.
Click to expand...
Click to collapse
I am using 3.1.0
I tried a later version and still didnt work, 3.2.2 does not even work!!!
Yes, format data after wiping.
I have tried to redownload
will try havoc right now
@bmwdroid
same issue with havoc, error one and your device is blank
not sure what happened with it
del32 said:
@bmwdroid
same issue with havoc, error one and your device is blank
not sure what happened with it
Click to expand...
Click to collapse
I suppose you definitely need a higher TWRP version but don't understand why you can't flash it.
What does TWRP say when you flash a higher version?
@del32 regarding higher TWRP.
As I understood you you're either flashing 3.5 or higher using Odin and it then TWRP doesn't start afterwards.
Correct?
What happens when you flash high TWRP...img using the older 3.1. TWRP and reboot after that into recovery from TWRP menu?
bmwdroid said:
@del32 regarding higher TWRP.
As I understood you you're either flashing 3.5 or higher using Odin and it then TWRP doesn't start afterwards.
Correct?
What happens when you flash high TWRP...img using the older 3.1. TWRP and reboot after that into recovery from TWRP menu?
Click to expand...
Click to collapse
I just got it to work!!! TWRP 3.5.2 and Havoc are running!!!
i was recording a video to show what i did and how it failed and it just worked
as long as i dont screw around with twrp i should be fine, thank you for your help.
if it wasnt for your response i was just going to give up and not bother.
Your browser is not able to display this video.
@del32 glad I could somewhat help.
May I quote from the film "Galaxy Quest":
Never give up, never surrender
Additional advices: I saw you rebooting after flashing but it's recommended to wipe Cache/Dalvik before the reboot.
It's useful to activate "advanced reboot" so that you can directly reboot to TWRP from the system without button combo.
When you want to get a higher TWRP you can flash it directly within the old one using a .img file.
Worked always for me so it should for you as well.
And you could mark the thread as solved so that others have no need to answer.
bmwdroid said:
@del32 glad I could somewhat help.
May I quote from the film "Galaxy Quest":
Never give up, never surrender
Additional advices: I saw you rebooting after flashing but it's recommended to wipe Cache/Dalvik before the reboot.
It's useful to activate "advanced reboot" so that you can directly reboot to TWRP from the system without button combo.
When you want to get a higher TWRP you can flash it directly within the old one using a .img file.
Worked always for me so it should for you as well.
And you could mark the thread as solved so that others have no need to answer.
Click to expand...
Click to collapse
Thank you very much, also ive never had issue with not wiping after flash but ill keep it in mind and try to remember for later on
I also had advanced reboot on but i didnt have an os on the phone at time of recording
once again, many thanks!!!!!!!
so excited to have Havoc on my phone
del32 said:
Thank you very much, also ive never had issue with not wiping after flash but ill keep it in mind and try to remember for later on
I also had advanced reboot on but i didnt have an os on the phone at time of recording
once again, many thanks!!!!!!!
so excited to have Havoc on my phone
Click to expand...
Click to collapse
Which Havoc version btw?
bmwdroid said:
Which Havoc version btw?
Click to expand...
Click to collapse
4.6, working nicely on android 11
faster than i thought it would be!
@del32 here you find much newer ones: