hello:
i have found shield tv and i don't know if it's bricked or no
just show logo nvidia
access fastboot
when i'm connecting in fastboot mod, my pc detect and i have install driver, name is "android bootloader interface"
fastboot device show me numero
but it's all, impossible to unlock oem
failed (command write failed (too many links))
if i try oem lock, tell me
failed (command write failed (unknow error))
please help me, i'm not beginner but i don't find soluce
If fastboot is working, then it's not bricked. Do you know what was done to it to put it in that state?
Maybe try flashing the stock image?
Related
Hi @all,
i just messed something up while testing several custom roms for my Zenfone5 so actually i cant write system neither by "sideload" nor by "fastboot flash system". i always get the a mistake like:
Code:
FAILED (remote: flash_cmds error!)
Actually i cant find a mistake by myself. Is it located in my PC or in my phone? i already searched for an errorlist for fastboot but that doesn't get me any results...
and as we say in germany:
Vielen Dank im Vorraus!
Vere'Athor
You're trying to flash a wrong file.
What's the command you're running?
I get the same error running this command:
fastboot.exe flash recovery recovery.img
I cant erase this partition too. When i run this:
fastboot.exe erase recovery
I get this:
FAILED (remote: unable to format)
¨
Please Help
Waërloga666 said:
I get the same error running this command:
fastboot.exe flash recovery recovery.img
I cant erase this partition too. When i run this:
fastboot.exe erase recovery
I get this:
FAILED (remote: unable to format)
¨
Please Help
Click to expand...
Click to collapse
Can you post a link to recovery you are trying to flash? (I will test it)
Can anyone help me out? I tried to install CM 13.1 in Zenfone 5 but when it gets to "writing boot" the following message appears:
FAILED (remote: flash_cmds error!)
How could i solve this? txs everyone
(If any of you guys could text in Portuguese i would be very pleasant)
if u want to flash custom rom
all u need is to unlock bootloader
take a look on this thread using auto.bat for unlock bootloader!
https://forum.xda-developers.com/zenfone-5/general/recovery-twrp-2-8-6-0-asus-zenfone-5-t3136263
after unlocked try flash TWRP again
to confirm success unlocked not!
if fail it will show error failed
just follow step by step read thru!
hope it helps
good luck !
I am Having The Same Error (FAILED (remote: flash_cmds error!)
What To do
I have a big problem with my old phone. Well, I have a HTC Desire 310 which was not used for a long time, after launch stopped on the logo. Then I decided to install stock rom. I downloaded a rom from a Russian site, then installed the MediaTek USB VCOM drivers and the FlashTool SP program.
The problem is that I broke something that the phone has bootloop and at the bottom of the message "TOOL DL Image Fail!". When I try to flash the rom with the battery after 9 seconds to restart and without battery after 2 seconds and disappears from the device manager.
I do not remember if this phone had administrator privileges
I downloaded various versions of FlashTool and drivers from different sources and nothing
Does anyone have any ideas what else can be done?
I used these guides:
https://forum.xda-developers.com/android/help/tuto-how-to-unbrick-htc-desire-310-dual-t3057203
https://forum.xda-developers.com/general/rooting-roms/guide-mediatek-spflashtool-failure-t2936933
https://forum.xda-developers.com/showthread.php?t=1982587
PS. Please excuse my English, if someone does not understand something I will try to explain more clearly.
I solved part of the problem. After many attempts to install rom. The next problem is unlocking the bootloader.
There are further problems. To enter fastboot I was write adb reboot-bootloader into the console (volume - and power not working).
Then a black screen appears and a small inscription FASTBOOT mode... .
When I enter the command fastboot device my device is visible but after entering command fastboot oem get_identifier_tokenit three dots appear and nothing happens
Another problem is the incorrect CID. I do not know if you have to download the bootloader first or change the CID
Currently, in fastboot mode, no commands work except fastboot devices.
I get errors when I type fastboot getvar:
Code:
fastboot: getvar version
fastboot out: getvar:version FAILED (remote: not support on security)
finished. total time: 0.002s
fastboot: getvar version-bootloader
fastboot out: getvar:version-bootloader FAILED (remote: not support on security)
finished. total time: 0.002s
fastboot: getvar version-main
fastboot out: getvar:version-main FAILED (remote: not support on security)
finished. total time: 0.003s
help
Exacty same problem. Someone please help what can i do?
Thank you very much
Hi, yesterday I decided to flash my Moto g4 xt1621 I put a rom of 7.1.2 and I did not work some things and I decided to put a stock rom of 6.0, I appeared a poster of software update to 7.0 and I gave it yes, I left it updating and never started again.
Try fastboot mode, with usb, charging, with the button on 10 minutes, but nothing turns on the screen, the only thing the phone does when connecting to the charger is the charging LED that turns on and off. The phone has 2 months , no computer recognizes the device.
I know that when I put a non-original rom I lost the warranty.
Upgrade.
After researching a lot, now my computer recognizes the device as two devices.
"Unknown USB device (link in compliance mode) and Fastboot athene_13mp S"
I managed to make it even though the phone boot, but it does not let me do anything in fastboot. (I do not see the rare android logo), and I get these messages:
Start Up Failed: Your device did not startup successfully.
Use the software repair assistant on computer
to repair your device.
Connect your device to you computer to get
the Software Repair Assitant.
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
ERROR: No boot imge found. Skip to fastboot
Boot up failed
ERROR: No boot imge found. Skip to fastboot
Boot up failed
ERROR: No boot imge found. Skip to fastboot
Boot up failed
USB Connected
Try putting the boot.img of the stock rom rom that I put and it will not let me either:
"downloading 'boot.img' ...
OKAY [0.533s]
booting
FAILED (remote failure)
finished. total time: 0
new edit: no have imei/meid and "sku"
"
Hi
I have Lenovo Tablet 2 Pro 1380L. I have simpley bricked it by flashing wrong firmware.
the problem is that when I boot it into FASTBOOT I cannot flash any IMG file and I get an error message that says "FAILED (remote command unknown)"
any idea why I'm getting such message ?
Hi Guys I am Having a problem with my Asus Zenfone Max Pro M2 (X01BDA) , I am not able to flash Twrp or i can't even flash anything via Fastboot.......
When I type the Commands in my PC i get this error :-
While flashing recovery :-
C:\adb>fastboot flash recovery recovery.img
Sending 'recovery' (29664 KB) FAILED (Write to device failed (Invalid argument))
fastboot: error: Command failed
While booting Recovery:-
C:\adb>fastboot boot recovery.img
Sending 'boot.img' (29664 KB) FAILED (Write to device failed (Too many links))
fastboot: error: Command failed
i have tried everything but still does'nt work Please help !!!
Check if you are entering the file name correctly with "fastboot flash recovery recovery.img"
Here in recovery.img instead of "recovery" write the filename of the recovery you downloaded.
Is your bootloader unlocked?
same problem here... can't seem find the solution. please help anybody. bootloader has been unlocked, all the name type correctly. but it just FAILED (Write tot device failed (Unknown error)) and the phone suddenly says press any key to shutdown.
richardson2001 said:
Hi Guys I am Having a problem with my Asus Zenfone Max Pro M2 (X01BDA) , I am not able to flash Twrp or i can't even flash anything via Fastboot.......
When I type the Commands in my PC i get this error :-
While flashing recovery :-
C:\adb>fastboot flash recovery recovery.img
Sending 'recovery' (29664 KB) FAILED (Write to device failed (Invalid argument))
fastboot: error: Command failed
While booting Recovery:-
C:\adb>fastboot boot recovery.img
Sending 'boot.img' (29664 KB) FAILED (Write to device failed (Too many links))
fastboot: error: Command failed
i have tried everything but still does'nt work Please help !!!
Click to expand...
Click to collapse
RetsuS said:
same problem here... can't seem find the solution. please help anybody. bootloader has been unlocked, all the name type correctly. but it just FAILED (Write tot device failed (Unknown error)) and the phone suddenly says press any key to shutdown.
Click to expand...
Click to collapse
Try this:
1. AMD Bug? - https://forum.xda-developers.com/t/fix-fastboot-issues-on-ryzen-based-pcs.4186321/
2. Switch Device from "Charging" to "File Transfer" Mode
3. Install the latest Device Driver or Universal USB Driver - https://www.androidfilehost.com/?fid=2188818919693784734
4. Placed the latest platform-tools with the Img File directly under the C Drive
5. Try another USB Cable
6. Use another USB Port (USB 3.0 Port to USB 2.0)
7. Try to execute Fastboot Command without connecting your Phone,
and once it says "waiting for device" plug in your USB Cable
8. Windows: Click "Change advanced power setting" on your chosen Plan and expand "USB Settings". Under "USB Settings" Section, expand "USB selective suspend setting" and change it to "Disabled" for On Battery and Plugged In.
9. Try another PC
Code:
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
I hope it helps (∩_∩)