Database Users

[Guide]How to install Xposed on the j700p

(Obvious words of legality, etc. I take no responsibility for anything that happens to your phone. I managed this on my own and everything worked. If you messed it up, I'm sorry, but it's not my problem)
Ok, now the good stuff! Hello all!
As you may know, user messi2050 managed to get us root on our phones (yay!). We don't yet have a custom recovery, and this is a usual requirement for Xposed, but fear not! I have figured out how to install it without a custom recovery. I'll try and be as clear as possible and provide all direct links to the files needed, but if something confuses you please let me know!
1. Root your phone
2. Download and install FlashFire
3. Samsung has weirdness associated with their roms and the way they do things under the Android hood, so you can't use the normal Marshmallow xposed module. You will need the Unofficial Xposed for Samsung Marshmallow by Wanam (HERE is a link directly to the APK you need)
4. Install the Xposed Installer for Marshmallow (Again, there is a direct link to the APK HERE[/URL
5. Open up FlashFire and press the (+) button. Select "Flash ZIP or OTA"
6. Choose the file downloaded in step 3
7. IMPORTANT! DESELECT "MOUNT /SYSTEM READ/WRITE"! Make sure everything is deselected! Then click the "✓"
8. Moment of truth y'all. Press the "FLASH" button at the bottom of the screen. You may get warnings, accept or clear them and continue
9. Your phone will shut down, show a bunch of text, and reboot after installing. THE REBOOT TAKES A LONG TIME, SEVERAL MINUTES AT LEAST! Don't be afraid, it will take quite a while to reboot. When it is done, it will "optimize apps" and then you should be all set!
Some xposed modules may not work for this phone! You run the risk of constant crashes and reboots with some modules. There are compatibility issues, especially if you neglect to read the warnings of each module, so read carefully! I'll give a list of modules I've installed with no issues, which will give yo a decent place to start (NOTE: There are individual settings in many of the modules, I haven't tried everything. So I can only tell you that the installation of the module is safe, NOT each setting).
Burnt Toast
Disable Fullscreen Keyboard
GPM Notification Seek Bar [L-M]
Greenify
Marshmallow SD Fix
Media Notification Seek [L-M]
NoSafeVolumeWarning
Notification Count
Wanam Xposed
XTouchWiz
If you happen to have success with any others, let us know and I'll update this list. Hope you guys enjoy, I'm so happy we finally got root and Xposed on this phone!

Followed your instructions (thanks) and have
BootManager
MinMinGuard
Swype Row and
Xinsta
Running.
It seems like most xposed modules work. Anyone interested should just follow the above instructions and give it a shot.

garyf said:
It seems like most xposed modules work. Anyone interested should just follow the above instructions and give it a shot.
Click to expand...
Click to collapse
Glad it works for you!
Yeah, I don't think there will be too many problems, I only mention the warning because if you're not careful, there are many modules that haven't been updated in years. If you're careless, you may install something from 2014 and it isn't compatible with Marshmallow and may cause constant crashes and force closes. Because we don't have a custom recovery, it's that much more important to be careful, as a mistake will requi9re a reflash and wipe everything. =S

Followed instructions and everything went just fine. Working great. Thank you!
EDIT: Having trouble finding Wanam Xposed. Can anyone help?

SonOfAnarchy0210 said:
Followed instructions and everything went just fine. Working great. Thank you!
EDIT: Having trouble finding Wanam Xposed. Can anyone help?
Click to expand...
Click to collapse
I see Wanam exposed in the list, however, it looks like XTouchWiz is similar, made by the same guy (Wanam), and is made for Marshmallow. Givev that a shot?

rainbowtuba said:
I see Wanam exposed in the list, however, it looks like XTouchWiz is similar, made by the same guy (Wanam), and is made for Marshmallow. Givev that a shot?
Click to expand...
Click to collapse
Yeah I must have been half asleep or something when I posted that because it is definitely there haha thank you though!

Opened Xposed this morning and this popped up. And when I go to downloads, there is no list. When I refresh, this keeps popping up. Any ideas as to what I should do?

Hi. Do you know how to install Xposed on j700f running mm?
Sent from my SM-J700F using XDA-Developers mobile app

Opened Xposed this morning and this popped up. And when I go to downloads, there is no list. When I refresh, this keeps popping up. Any ideas as to what I should do?
Click to expand...
Click to collapse
Sopn of Anarchy, I have no idea, sadly. Everything is working okay from my phone. No such issue
SankyLucky said:
Hi. Do you know how to install Xposed on j700f running mm?
Click to expand...
Click to collapse
If you have it rooted I would assume it's fairly similar. If there is any difference in the processor you will want to download the appropriate file, but using Flashfire and the Wanam version of xposed should be the correct move. Best of luck!

SankyLucky said:
Hi. Do you know how to install Xposed on j700f running mm?
Sent from my SM-J700F using XDA-Developers mobile app
Click to expand...
Click to collapse
Wrong thread ! For your answer here you go buddy: How to Root, TWRP and Install Xposed Framework on J7 (SM-J700F) (Screenshots inside)

Worked!
THANKS!

Hey, guys, just wondering if it's possible to flash this xposed through twrp? Or does having a working twrp alter the process or results in anyway?

acesavant00 said:
Hey, guys, just wondering if it's possible to flash this xposed through twrp? Or does having a working twrp alter the process or results in anyway?
Click to expand...
Click to collapse
Yes, I flashed this through twrp and got J700H xposed

Is there a way to keep the processor from overhearing?

SykkNyzz said:
Is there a way to keep the processor from overhearing?
Click to expand...
Click to collapse
Assuming you meant overHEATING on Snapdragon, try using the phone without aftermarket cover and without charger plugged in.
Also check out this extended guide: http://forum.xda-developers.com/galaxy-j7/how-to/marshmallow-battery-drain-overheating-t3439274

natri23 said:
Assuming you meant overHEATING on Snapdragon, try using the phone without aftermarket cover and without charger plugged in.
Also check out this extended guide: http://forum.xda-developers.com/galaxy-j7/how-to/marshmallow-battery-drain-overheating-t3439274
Click to expand...
Click to collapse
No, the phone heats up in my hand without charger and I don't even own a cover. I misspelled my word on accident so I understand why you would correct me.
---------- Post added at 01:42 PM ---------- Previous post was at 12:51 PM ----------
But that is now an old issue since I used the debloated version

I am running the modules and they all seem to work perfectly:
HideBatterylowAlert,
Neo power menu,
PMP,
YouTube background playback,
And flat style bar indicators.
Thank again!

I have the sm- j700p Boost and tried this but it bricks the phone. The apk installs fine but the phone never boots up fully after installing the framework. I tried with twrp and flashify.

worked perfect on J700T Tmobile.
maybe you should post this in the J700T Section or i can do it?

Solved
newsense2004 said:
I have the sm- j700p Boost and tried this but it bricks the phone. The apk installs fine but the phone never boots up fully after installing the framework. I tried with twrp and flashify.
Click to expand...
Click to collapse
OK finally got it working I don't know if I had the wrong file somehow or if using twrp to flash but I started over. Re-download the files and used flashfire to flash the zip. Worked perfectly this time, this phone has no compass sensor. Wish I knew that as I only wanted Xposed for the module that mimics a gyro.

Google assistant

Has anyone received Google Assistant on their phones yet? Just curious.

Yep. You can force it with a build.prop edit. It worked for me, but I think there are mixed reports. Root required.
https://forum.xda-developers.com/showpost.php?p=71272192&postcount=1520

I'm surprised to hear some people still don't have GA natively. I'm a long time HTC user, but I just bought my 10 last Fri. it's pretty sweet. although, I must say, I still REALLY like my One M8.

SilverZero said:
Yep. You can force it with a build.prop edit. It worked for me, but I think there are mixed reports. Root required.
https://forum.xda-developers.com/showpost.php?p=71272192&postcount=1520
Click to expand...
Click to collapse
I unlocked my bootloader Saturday but I'm reluctant to root because I don't want to lose Android Pay. If I can modify some the build.prop for Google Assistant and get wi-fi hotspot then reboot so I can use Android pay then I might.

misfiremind said:
I unlocked my bootloader Saturday but I'm reluctant to root because I don't want to lose Android Pay. If I can modify some the build.prop for Google Assistant and get wi-fi hotspot then reboot so I can use Android pay then I might.
Click to expand...
Click to collapse
I'm S-ON, unlocked bootloader, newest N firmware and latest Bad Boyz ROM (full version with MagiskSU, not SuperSU) and I have Android Pay working just fine. No reboot necessary, just use Magisk Manager to hide Magisk from Android Pay.

SilverZero said:
I'm S-ON, unlocked bootloader, newest N firmware and latest Bad Boyz ROM (full version with MagiskSU, not SuperSU) and I have Android Pay working just fine. No reboot necessary, just use Magisk Manager to hide Magisk from Android Pay.
Click to expand...
Click to collapse
I know, but I've rooted and messed with custom ROMs on every phone I've had and I'm kind of tired of messing with that stuff. Really I think the best thing I could do is buy a Pixel. I'm tired of the different phone manufacturers and their bloated ROMs and the constant problems that custom ROMs have. At least for right now. Thanks though. I'll keep it in mind if I ever feel like jacking with that stuff again.

"OK Google" Always on!!??
So has anyone else noticed this?
The attached screenshot shows the settings for the "ok google" always listening feature. I know this feature is useful to launch google from any screen or even when the screen is off but I do not want this on for privacy reasons. I was always able to disable it on Marshmallow but now with N even when i turn it off it turns back on.
How to try to reproduce:
Turn off the feature
Exit the settings menu
Go back to the Ok google settings and see if its enabled again.
Is this happening to anyone else!?

misfiremind said:
I unlocked my bootloader Saturday but I'm reluctant to root because I don't want to lose Android Pay. If I can modify some the build.prop for Google Assistant and get wi-fi hotspot then reboot so I can use Android pay then I might.
Click to expand...
Click to collapse
hate to be the bearer of bad news but SafetyNet will fail w/ a unlocked bootloader
misfiremind said:
I know, but I've rooted and messed with custom ROMs on every phone I've had and I'm kind of tired of messing with that stuff. Really I think the best thing I could do is buy a Pixel. I'm tired of the different phone manufacturers and their bloated ROMs and the constant problems that custom ROMs have. At least for right now. Thanks though. I'll keep it in mind if I ever feel like jacking with that stuff again.
Click to expand...
Click to collapse
you must not be familar w/ Magisk....the "magic" of magisk can modify the phone w/o actually modifying /system, so technically u have a stock device but custom at the same time...plus magisk hide allows AP to work & pass SafetyNet
my Magisk ROM has all the mods & bloatware removed just like my custom ROM...

deakelem said:
So has anyone else noticed this?
The attached screenshot shows the settings for the "ok google" always listening feature. I know this feature is useful to launch google from any screen or even when the screen is off but I do not want this on for privacy reasons. I was always able to disable it on Marshmallow but now with N even when i turn it off it turns back on.
How to try to reproduce:
Turn off the feature
Exit the settings menu
Go back to the Ok google settings and see if its enabled again.
Is this happening to anyone else!?
Click to expand...
Click to collapse
this is from my Bolt, so it may be different, but I can disable just fine...

OMJ said:
hate to be the bearer of bad news but SafetyNet will fail w/ a unlocked bootloader
you must not be familar w/ Magisk....the "magic" of magisk can modify the phone w/o actually modifying /system, so technically u have a stock device but custom at the same time...plus magisk hide allows AP to work & pass SafetyNet
my Magisk ROM has all the mods & bloatware removed just like my custom ROM...
Click to expand...
Click to collapse
I didn't even try after unlocking because I'm still waiting for my bank to support Android Pay, but I just checked and your right. I'm blocked from Android Pay. Might as well figure out how to root and install a ROM this weekend. ? And no, I have no idea what Magisk is, but I guess I'll have to figure it out.

deakelem said:
So has anyone else noticed this?
The attached screenshot shows the settings for the "ok google" always listening feature. I know this feature is useful to launch google from any screen or even when the screen is off but I do not want this on for privacy reasons. I was always able to disable it on Marshmallow but now with N even when i turn it off it turns back on.
How to try to reproduce:
Turn off the feature
Exit the settings menu
Go back to the Ok google settings and see if its enabled again.
Is this happening to anyone else!?
Click to expand...
Click to collapse
Mine seems to work fine. Have you tried clearing the Google App data? I had an issue with a couple of apps after the Nougat update and had to clear the data and uninstall then reinstall the apps to get them working correctly.

misfiremind said:
Mine seems to work fine. Have you tried clearing the Google App data? I had an issue with a couple of apps after the Nougat update and had to clear the data and uninstall then reinstall the apps to get them working correctly.
Click to expand...
Click to collapse
Ill try that but I flashed N using the RUU and then clean installed OMJ's badboys rom so no app data would have been there during M to N
---------- Post added at 02:16 PM ---------- Previous post was at 02:14 PM ----------
OMJ said:
this is from my Bolt, so it may be different, but I can disable just fine...
Click to expand...
Click to collapse
Thats strange, i dont have all those menu entries... could be cause I have work email on my phone via activesync which restricts certain security and lockscreen options.

OMJ said:
hate to be the bearer of bad news but SafetyNet will fail w/ a unlocked bootloader
Click to expand...
Click to collapse
I'm confused . . . My bootloader is unlocked, has been since I got my 10 last summer, and I just used Android Pay this weekend, and Magisk Manager says I'm currently passing SafetyNet. Android Pay is checked in Magisk Hide.
Are you saying that unlocking the bootloader alone will cause SafetyNet to fail, but Magisk Hide will then allow it again?

SilverZero said:
I'm confused . . . My bootloader is unlocked, has been since I got my 10 last summer, and I just used Android Pay this weekend, and Magisk Manager says I'm currently passing SafetyNet. Android Pay is checked in Magisk Hide.
Are you saying that unlocking the bootloader alone will cause SafetyNet to fail, but Magisk Hide will then allow it again?
Click to expand...
Click to collapse
yes, merely having the bootloader unlocked even w/ 100% stock ROM, safetynet will fail....the beauty of magisk is that it hides it

I think at this point I'd rather relock my bootloader and go back to using my Galaxy S4 while I try to sell my HTC 10 and then put that money towards a Pixel. Anybody wanna buy a phone? ?

It's here! I literally just this minute got Google Assistant!

OMJ said:
hate to be the bearer of bad news but SafetyNet will fail w/ a unlocked bootloader
you must not be familar w/ Magisk....the "magic" of magisk can modify the phone w/o actually modifying /system, so technically u have a stock device but custom at the same time...plus magisk hide allows AP to work & pass SafetyNet
my Magisk ROM has all the mods & bloatware removed just like my custom ROM...
Click to expand...
Click to collapse
I think I am going to give this a shot. I am running your stock rooted with TWRP while S-on. Can I just install your Magisk Full Rom and go from there or is that too easy to believe? Thanks OMJ!

OMJ said:
hate to be the bearer of bad news but SafetyNet will fail w/ a unlocked bootloader
you must not be familar w/ Magisk....the "magic" of magisk can modify the phone w/o actually modifying /system, so technically u have a stock device but custom at the same time...plus magisk hide allows AP to work & pass SafetyNet
my Magisk ROM has all the mods & bloatware removed just like my custom ROM...
Click to expand...
Click to collapse
Is magisk a ROM or more of a mod? And what is magisk su? I'm going to try and get my phone rooted this weekend but I can't find a tutorial thread, it seems to be scattered everywhere. It seems like I fastboot TWRP, flash SuperSU, flash magisk then install magisk manager from Google Play?

misfiremind said:
I didn't even try after unlocking because I'm still waiting for my bank to support Android Pay, but I just checked and your right. I'm blocked from Android Pay. Might as well figure out how to root and install a ROM this weekend. ? And no, I have no idea what Magisk is, but I guess I'll have to figure it out.
Click to expand...
Click to collapse
im running viper due to lack of cm/aosp st the moment.. so i have magisk but i have no idea what it is or how to use it. very little instruction out there.

Has anyone been successful in editing their build.prop file to activate (or deactivate) Google Assistant? I actually want to deactivate Google Assistant but I can't seem save changes to my build.prop file.
I have root on stock ROM.
Set SE Linux to permissive.
Tried using Root Explorer and build.prop Editor. Both give me an error message stating it can't save the build.prop file.
Suggestions?

Help w tuten1000's Guide: Root + custom kernel + clean rom

In the last week I received my xperia x compact completely stock. First thing I do when I get a new phone before even activating it is root it. I was utilizing this guide to root my xperia x compact "Guide: Root + Custom Kernel + Clean rom + TA for X Compact" and I am stuck on the step where you are instructed to flash the modified XC-GenesisKernel-v1.04-nodrm kernel and SU. Flashing this kernel always results in a boot loop (Ive waited more then 30 minutes for it to resolve). I reflash the stock service exchange unit - 34.1.A.1.198 MM firmware to get back a functioning phone. The guide recommends:
"Run xperifirm and download the "service exchange unit - 34.1.A.1.198" firmware for posterity and latest rom for your region."
Am I supposed to use the most current nougat firmware for the following steps and only use the service exchange unit firmware if I need to downgrade to the lower original firmware? The thread for the XC-GenesisKernel states it is for nougat roms, which would explain a boot loop when I try to use the service exchange unit MM rom. Ideally Id like to stay on MM so that I can use xposed. Root and the phone being fully functional with no loss of camera and such is my main desire, xposed is secondary. I have a Backup TA of my DRM keys, the phone bootloader is unlocked, and I am looking for a little direction / clarification, any help in this respect is greatly appreciated.
Thanks

efaustus9 said:
help in this respect is greatly appreciated.
Click to expand...
Click to collapse
Click the first link in the guide and read it.

XperienceD said:
Click the first link in the guide and read it.
Click to expand...
Click to collapse
Thanks, I read through it and I see indeed the latest nougat firmware is what I should use in the later steps of tuten1000's guide and is the source of the boot loop I am experiencing.
If possible I would like to stay on marshmallow so I can used xposed framework. Are you aware of or can you recommend a kernel I can flash that will give me root, fingerprint, and use of most DRM functions while still on marshmallow.

Maybe you can try my guide using Magisk with full DRM, Xposed and root. But you need to flash back to MM first if you need Xposed.
https://forum.xda-developers.com/x-compact/how-to/android-pay-safety-net-rooted-unlocked-t3610342

itandy said:
Maybe you can try my guide using Magisk with full DRM, Xposed and root. But you need to flash back to MM first if you need Xposed.
https://forum.xda-developers.com/x-compact/how-to/android-pay-safety-net-rooted-unlocked-t3610342
Click to expand...
Click to collapse
Excellent itandy, this this just what I had in mind. I never downloaded and flashed a nougat rom as xposed was important to me. In following tuten1000's guide I did flash the XC genesis kernel as well as SU in recovery. This resulted in a boot loop but a prerequisite in your guide is a /system partition without any trace of su. Since I reflashed the stock service exchange unit 34.1.A.1.198 MM firmware I should be good to proceed right?

efaustus9 said:
Excellent itandy, this this just what I had in mind. I never downloaded and flashed a nougat rom as xposed was important to me. In following tuten1000's guide I did flash the XC genesis kernel as well as SU in recovery. This resulted in a boot loop but a prerequisite in your guide is a /system partition without any trace of su. Since I reflashed the stock service exchange unit 34.1.A.1.198 MM firmware I should be good to proceed right?
Click to expand...
Click to collapse
You're all good to begin with MM stock ROM.

itandy said:
You're all good to begin with MM stock ROM.
Click to expand...
Click to collapse
It worked beautifully, thank you so much itandy :victory:
Anyway to get rid of the device is not secure screen on boot?

efaustus9 said:
It worked beautifully, thank you so much itandy :victory:
Anyway to get rid of the device is not secure screen on boot?
Click to expand...
Click to collapse
This is a common request but the answer is no.

itandy said:
This is a common request but the answer is no.
Click to expand...
Click to collapse
Okay, it would be nice to be rid of but it is a worthwhile trade off.
In your guide you mention a safety net, and installing xposed breaks it. What is this safety net and what is the draw back to breaking it? Am I locked out of certain apps or functions?

efaustus9 said:
Okay, it would be nice to be rid of but it is a worthwhile trade off.
In your guide you mention a safety net, and installing xposed breaks it. What is this safety net and what is the draw back to breaking it? Am I locked out of certain apps or functions?
Click to expand...
Click to collapse
SafetyNet is the security checking API used by some apps like Android Pay and Pokemon Go to make sure your device is not tampered with. Simply put it makes sure your device is stock, not unlocked, rooted or modified. Magisk currently is able to bypass SafetyNet checking for root and some other "unwanted" apps. But Xposed will still be detected because it works in much lower system level. And with Magisk you can simply disable Xposed temporarily and reboot if you want to use, say, Android Pay.

itandy said:
SafetyNet is the security checking API used by some apps like Android Pay and Pokemon Go to make sure your device is not tampered with. Simply put it makes sure your device is stock, not unlocked, rooted or modified. Magisk currently is able to bypass SafetyNet checking for root and some other "unwanted" apps. But Xposed will still be detected because it works in much lower system level. And with Magisk you can simply disable Xposed temporarily and reboot if you want to use, say, Android Pay.
Click to expand...
Click to collapse
ah very informative, thanks again.
I installed the xposed framework SDK23 in Magisk manager, it is showing up as installed under modules in magisk but xposed is not in the app drawer and I cant seem to access it.

efaustus9 said:
ah very informative, thanks again.
I installed the xposed framework SDK23 in Magisk manager, it is showing up as installed under modules in magisk but xposed is not in the app drawer and I cant seem to access it.
Click to expand...
Click to collapse
You need to install Xposed Installer separately. Try this unofficial app.
https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758

itandy said:
You need to install Xposed Installer separately. Try this unofficial app.
https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
Click to expand...
Click to collapse
Haha once again you come through. You are really helping me get this all sorted with so little fuss, I am very grateful.
This is my first xperia experience, I am coming from a samsung s3 running a KK slimrom and things are a bit different on this device. Any other pointers or recommendations for this new phone? Is there a way to make the soft key bar transparent so I can actually utilize the full 4.6"?

efaustus9 said:
Haha once again you come through. You are really helping me get this all sorted with so little fuss, I am very grateful.
This is my first xperia experience, I am coming from a samsung s3 running a KK slimrom and things are a bit different on this device. Any other pointers or recommendations for this new phone? Is there a way to make the soft key bar transparent so I can actually utilize the full 4.6"?
Click to expand...
Click to collapse
I remember there're mods (maybe Xposed modules) to make the navbar autohide. Maybe you'd also like to check out my navbar Xposed module. See my signature.

itandy said:
I remember there're mods (maybe Xposed modules) to make the navbar autohide. Maybe you'd also like to check out my navbar Xposed module. See my signature.
Click to expand...
Click to collapse
Great, I will definitely check out your app. Ideally Id like to mimic what I believe is called the "immersive mode" in supported apps. In this mode the app takes up the full screen and the icons are replaced with three persistent minimal dots.

Oem unlock not allowed on Android 8.1 Beta ROM

Guys , how to unlock Mi A1 ?

Fine for me.

You have to tick it in the dev options
Edit: tap several times on the build number to unlock the dev options.

Have you used the GCam tool?
Just tap on Build Number until dev options activation, touch "allow OEM unlock) then reboot to fastboot and {fastboot oem unlock), if you lock the bootloader again you will lose all of your data.
After BL unlocking your phone will be uncertified (can't pass SafetyNet).

N1ck474 said:
After BL unlocking your phone will be uncertified (can't pass SafetyNet).
Click to expand...
Click to collapse

if i lock my bootloader , phone auto restart and erase data ... if i lock , phone data erase again . strange ..

You need to enable OEM unlocking in Developer options

JoKeRLeE said:
if i lock my bootloader , phone auto restart and erase data ... if i lock , phone data erase again . strange ..
Click to expand...
Click to collapse
This is expected behaviour in case you are unlocking. Becuase, when you unlock, your data will be in risks.
In some devices, it's implemented for locking as well.

InvalidDNA said:
This is expected behaviour in case you are unlocking. Becuase, when you unlock, your data will be in risks.
In some devices, it's implemented for locking as well.
Click to expand...
Click to collapse
seems like latest aboot implement it .

coremania said:
You have to tick it in the dev options
Edit: tap several times on the build number to unlock the dev options.
Click to expand...
Click to collapse
How install new font, please tell me

ozgurubuntu said:
How install new font, please tell me
Click to expand...
Click to collapse
U can use substratum, ifont app or magisk module
I use the Google sans mod magisk module.

How you flashed 8.1? Will OTA works after that?
Will the user data be erased by unlocking 8.1?

Wired Life said:
How you flashed 8.1? Will OTA works after that?
Will the user data be erased by unlocking 8.1?
Click to expand...
Click to collapse
User data still here until the bootloader still unlocked (so, with this ROM, don't lock it)
OTAs doesn't work.
Flash it with TWRP, just flash from stock April Oreo, no wipes.

N1ck474 said:
...After BL unlocking your phone will be uncertified (can't pass SafetyNet).
Click to expand...
Click to collapse
Not really. I have unlocked my bootloader and have'nt got any problems with SafetyNet. When I check it on magisk It passes with no issues. Also I'm able to use banking apps with no issues.

Takeawake said:
Not really. I have unlocked my bootloader and have'nt got any problems with SafetyNet. When I check it on magisk It passes with no issues. Also I'm able to use banking apps with no issues.
Click to expand...
Click to collapse
Then i don't know where's the problem on my phone, with leaked 8.1 and unlocked BL it's uncertified

N1ck474 said:
Then i don't know where's the problem on my phone, with leaked 8.1 and unlocked BL it's uncertified
Click to expand...
Click to collapse
If you have Xposed you will never pass SafetyNet either. But you need up to date Magisk at least.

CosmicDan said:
If you have Xposed you will never pass SafetyNet either. But you need up to date Magisk at least.
Click to expand...
Click to collapse
I have latest Magisk just for the GCam Module...

Probably because you installed xposed.. I did too and finally I reflashed the ROM to avoid the SafetyNet problem. With xposed allways will get fail on SafetyNet test since It modifies the system partition. Magisk don,nt.

Takeawake said:
Probably because you installed xposed.. I did too and finally I reflashed the ROM to avoid the SafetyNet problem. With xposed allways will get fail on SafetyNet test since It modifies the system partition. Magisk don,nt.
Click to expand...
Click to collapse
I don't have xposed

N1ck474 said:
I don't have xposed
Click to expand...
Click to collapse
Hummm... Then u can try this
https://forum.xda-developers.com/showthread.php?t=3722565

[Magisk] How will I install Android 10 when I receive it without losing root?

Will it be the same way as the small security updates?
I.e. (from Magisk) install to inactive slot before restarting the phone.
Also, Android 10 has the faster security updates feature which installs them without restarting the phone. So when I do get Android 10, and receive a security update, won't it directly install and remove root even before I reboot through magisk?

I think clean flash should be the best option (I'm talking about the update from 9 to 10).

onliner said:
I think clean flash should be the best option (I'm talking about the update from 9 to 10).
Click to expand...
Click to collapse
I don't wanna lose my data ?

usaid.shafqat said:
I don't wanna lose my data
Click to expand...
Click to collapse
If you dont know how to back up your data, then you have no business rooting your phone. Leave it stock, or better yet, get an iPhone.

thedrizzle said:
If you dont know how to back up your data, then you have no business rooting your phone. Leave it stock, or better yet, get an iPhone.
Click to expand...
Click to collapse
I use titanium but what I meant by "not losing my data" was that I would want to avoid logging into all my accounts again as much as I could.

usaid.shafqat said:
Will it be the same way as the small security updates?
I.e. (from Magisk) install to inactive slot before restarting the phone.
Also, Android 10 has the faster security updates feature which installs them without restarting the phone. So when I do get Android 10, and receive a security update, won't it directly install and remove root even before I reboot through magisk?
Click to expand...
Click to collapse
Which version 6t do you have?

twinnfamous said:
Which version 6t do you have?
Click to expand...
Click to collapse
Running the latest: 9.0.16

usaid.shafqat said:
Running the latest: 9.0.16
Click to expand...
Click to collapse
I meant is it T-Mobile or international?
The T-Mobile one is most likely going to be difficult

Hi there...
I've just clean this thread slightly. This is a thread in the Q&A forum, which allows to ask EVERYTHING that is somehow related to this device. There hasn't been a similar thread yet i.e. it was fine to create one.
If someone doesn't like the topic, some questions or answers simply continue your journey and refrain from posting here.
Your friendly neighbourhood watch

Guys don't expect things to work with the new update immediately. Android 10 has a file system rehaul so stuffs gonna work differently. That being said I'm excited. I'm just sad I won't get to use desktop mode since our USB Cs arent new or powerful enough to use as an HDMI out *sadfate*

twinnfamous said:
I meant is it T-Mobile or international?
The T-Mobile one is most likely going to be difficult
Click to expand...
Click to collapse
Oh, it's International, unlocked.

usaid.shafqat said:
Oh, it's International, unlocked.
Click to expand...
Click to collapse
Before you do any of this make sure you disable any magisk modules you may have
Do local upgrade method but don't reboot.
Then go to magisk and select modules click the plus and find twrp installer zip once that's done.
Choose install to inactive slot after ota
Then reboot.

twinnfamous said:
Before you do any of this make sure you disable any magisk modules you may have
Do local upgrade method but don't reboot.
Then go to magisk and select modules click the plus and find twrp installer zip once that's done.
Choose install to inactive slot after ota
Then reboot.
Click to expand...
Click to collapse
Hello, when you say to disable the Magisk modules, should you simply uncheck the modules installed in Magisk or press "uninstall" and "restore images" on the Magisk home page?

PàllGuizi said:
Hello, when you say to disable the Magisk modules, should you simply uncheck the modules installed in Magisk or press "uninstall" and "restore images" on the Magisk home page?
Click to expand...
Click to collapse
I never uninstall magisk and restore images. Because I allways keep magisk. I just select to remove modules on next boot because they cause me problems.
As long as u keep magisk u can flash twrp with magisk.

twinnfamous said:
I never uninstall magisk and restore images. Because I allways keep magisk. I just select to remove modules on next boot because they cause me problems.
As long as u keep magisk u can flash twrp with magisk.
Click to expand...
Click to collapse
I prefer to ask to be on, because some also do like this: uninstall Magisk (without reboot), installation of the update (still without reboot) Magisk installation from the manager and reboot! I know it's more for OTAs but in the end I found on the forums that some processes like that for any ROM.
Anyway thank you for your answer I will try now: D
Edit : It does not work for me, nothing starts and it tells me directly "Failure of the installation of the home system" when I try by the local upgrade I would do with twrp this does not matter

Let's just disregard this silly post please.
Thank you.
Incidentally, this might be a sound method for upgrading Stable Pie to Stable Q:
https://forum.xda-developers.com/showpost.php?p=80812793&postcount=12