Database Users

iNew V3 Mobile is not working with any SIM

I have brought iNew V3 MTK6582 1.3GHz Quad Core Android mobile in Online.After un-boxing it I have found that the mobile is detecting the SIM'S but not able to connect Network from both SIM slots.
I have tried multiple SIM'S ( Airtel, Vodafone, Idea and Tata DOCOMO) to verify whether its an SIM/Carier problem, but found that all the SIMS are acting same.
I can see that mobile is able to show the mobile carrier and SIM tools from the "SIMtoolKit" application in the mobile. But required Voice Call, Video Calls and Messages are grayed out in the SIM Management.
"Can't connect to this network right now. Try again later" Error is coming in the mobile when I am choosing Network Manually
If I dial in, Immediately an error ( Mobile Network not available) is coming on the screen.
There is a Small Red CROSS Symbol on the SIM Network icon in the Home screen.
Please check the Screenshots for more information.
How can I fix this Issue with the SIM'S ????

Galectus said:
I have brought iNew V3 MTK6582 1.3GHz Quad Core Android mobile in Online.After un-boxing it I have found that the mobile is detecting the SIM'S but not able to connect Network from both SIM slots.
I have tried multiple SIM'S ( Airtel, Vodafone, Idea and Tata DOCOMO) to verify whether its an SIM/Carier problem, but found that all the SIMS are acting same.
I can see that mobile is able to show the mobile carrier and SIM tools from the "SIMtoolKit" application in the mobile. But required Voice Call, Video Calls and Messages are grayed out in the SIM Management.
"Can't connect to this network right now. Try again later" Error is coming in the mobile when I am choosing Network Manually
If I dial in, Immediately an error ( Mobile Network not available) is coming on the screen.
There is a Small Red CROSS Symbol on the SIM Network icon in the Home screen.
Please check the Screenshots for more information.
How can I fix this Issue with the SIM'S ????
Click to expand...
Click to collapse
As it is a new phone, I would say re install the official firmware and checkout. it should solve the issue. if not then that is a hardware issue. and it should be notified to suppliers the asap they should change it.
---------- Post added at 09:41 PM ---------- Previous post was at 09:16 PM ----------
Galectus said:
"Can't connect to this network right now. Try again later" Error is coming in the mobile when I am choosing Network Manually
How can I fix this Issue with the SIM'S ????
Click to expand...
Click to collapse
If this doesn't work then the Problem is EFS folder which has to do with IMEI.
just check out. 1) what your imei is 2)if your imei is blacklisted.
restore the imei to get a VALID IMEI only then will it be able to access the network.

Thanks for the Reply, I will give a try as you said.

Galectus said:
Thanks for the Reply, I will give a try as you said.
Click to expand...
Click to collapse
Its 99% an IMEI issue.
Sent from TheXDApp

Resolved
Its 100% IMEI issue. Use engineering mode and use different IMEI. It works. I had same issue and this is resolved now.

iNew V3
Galectus said:
Thanks for the Reply, I will give a try as you said.
Click to expand...
Click to collapse
I got it fixed by changing the IMEI of my broken old phone.
No problem now.

khaleelh said:
Hey...Is it working?
My 3g BSNL sim works with normal sim slot. But Airtel doesn't. Again, BSNL works only when 3G network is available.
I guess its not IMEI issue.I thinks its band issue. iNew V3's band is GSM 850/900/1800/1900MHz. 3G: WCDMA 850/2100MHz.
In india 2g and 3g band is either 900 or 1800. Exception is BSNL 3g which works in 2100 MHz.
worldtimezone(dot)com/gsm.html
Is it really network band issue? Can any throw more light on this?
Click to expand...
Click to collapse
AFAIK inew v3 supports 900, 1800, as well as 2100. So that should not be a problem. Also If the IMEI not blacklisted by BSNL it should work for both 2G and 3G, not just 3G. Please check again whether it works for BSNL 2G network. I am asserting that its an IMEI issue bcoz many have solved "no network detection" problem by changing the IMEI to a legit one.

rajan2002 said:
Its 100% IMEI issue. Use engineering mode and use different IMEI. It works. I had same issue and this is resolved now.
Click to expand...
Click to collapse
I have exactly the same problem that is described above. Would you tell us please How to change the IMEI (in engineering mode) for this model iNew V3?. Starting on how to enter to engineering mode? (you know I'm a dummy user. We are lots
Many thanks in advance

jloropezas said:
I have exactly the same problem that is described above. Would you tell us please How to change the IMEI (in engineering mode) for this model iNew V3?. Starting on how to enter to engineering mode? (you know I'm a dummy user. We are lots
Many thanks in advance
Click to expand...
Click to collapse
Hi. I hope you have got the problem solved by now. Reply if you haven't .

IMEI problem or band problem
shikhar623 said:
Hi. I hope you have got the problem solved by now. Reply if you haven't .
Click to expand...
Click to collapse
Please help me reinstall IMEI or change the band issue.. Thanks in advance

debasish241 said:
Please help me reinstall IMEI or change the band issue.. Thanks in advance
Click to expand...
Click to collapse
http://blog.antelife.com/2014/04/01...e-tool-operation-guide-newest-rom-v1-0-8.html
It should help..

iNEW V3 can't start or receive calls with enabled 3G
Hi All,
I bought an iNEW V3 1 month ago, looks quite good except one annoying thing:
When I enable the 3G internet connection it is not possibile to start or receive calls while I am in H or H+ covered zone.
As soon as the covering is sinple E (EDGE I think) the above problem dissapears, therefore the phone can be used only with disabled 3G (GSM only) internet or WIFI.
I made some factory resets, tried to solve it with many MTK setting apps, without any success.
I also thied th IMEI trick with SN_STATION, tried 5 times and failed at the end.
Phone is not rooted, tried to root it with Framaroot and some others, but didn't worked.
Do you have any further ideea which could work?

[Q] fix network problem in yureka 100% it will work

There is also software based bug for network mode. I have personally experienced this i.e. network mode doesn’t change in reality even if I select 3g mode. So, to force your particular sim card to switch to 3g only mode, first deactivate/disable other sim card on Yureka from setting> sim cards menu. Then dial *#*#4636#*#* > phone information. Tap on Turn off radio button and wait until the button reads turn on radio. Select WCDMA only from dropdown menu above the button. Wait a few seconds. Now tap on Turn on Radio button. Your desired sim card will successfully connect to 3G network. Now go to settings and sim card option and activate the disabled sim card as well. You may need to manually search for network signal if no network is shown. Also you may need to restart the device. If in 3g mode, your phone doesn’t connect to internet, Go to apn setting to ensure correct apn is selected. Sometimes APN menu might not show any installed network settings, in such case, just restart the handset. All these network related issues will be hopefully solved in the next Yureka ota software/firmware update.
after you did this you need to reboot your device......

maheshbabu9999 said:
There is also software based bug for network mode. I have personally experienced this i.e. network mode doesn’t change in reality even if I select 3g mode. So, to force your particular sim card to switch to 3g only mode, first deactivate/disable other sim card on Yureka from setting> sim cards menu. Then dial *#*#4636#*#* > phone information. Tap on Turn off radio button and wait until the button reads turn on radio. Select WCDMA only from dropdown menu above the button. Wait a few seconds. Now tap on Turn on Radio button. Your desired sim card will successfully connect to 3G network. Now go to settings and sim card option and activate the disabled sim card as well. You may need to manually search for network signal if no network is shown. Also you may need to restart the device. If in 3g mode, your phone doesn’t connect to internet, Go to apn setting to ensure correct apn is selected. Sometimes APN menu might not show any installed network settings, in such case, just restart the handset. All these network related issues will be hopefully solved in the next Yureka ota software/firmware update.
after you did this you need to reboot your device......
Click to expand...
Click to collapse
It's not a question thread! Is it? This thing's already poted in forums and everyone knows it., but thanks. Please edit your Topic.

maheshbabu9999 said:
There is also software based bug for network mode. I have personally experienced this i.e. network mode doesn’t change in reality even if I select 3g mode. So, to force your particular sim card to switch to 3g only mode, first deactivate/disable other sim card on Yureka from setting> sim cards menu. Then dial *#*#4636#*#* > phone information. Tap on Turn off radio button and wait until the button reads turn on radio. Select WCDMA only from dropdown menu above the button. Wait a few seconds. Now tap on Turn on Radio button. Your desired sim card will successfully connect to 3G network. Now go to settings and sim card option and activate the disabled sim card as well. You may need to manually search for network signal if no network is shown. Also you may need to restart the device. If in 3g mode, your phone doesn’t connect to internet, Go to apn setting to ensure correct apn is selected. Sometimes APN menu might not show any installed network settings, in such case, just restart the handset. All these network related issues will be hopefully solved in the next Yureka ota software/firmware update.
after you did this you need to reboot your device......
Click to expand...
Click to collapse
Hi.....i tried the above step.....still i am unable to connect to the 3G network......it says...."Cant Connect to this network right now"....on manually selecting the network

maheshbabu9999 said:
.....to force your particular sim card to switch to 3g only mode, first deactivate/disable other sim card on Yureka from setting> sim cards menu. Then dial *#*#4636#*#* > phone information. Tap on Turn off radio button and wait until the button reads turn on radio. Select WCDMA only from dropdown menu above the button. Wait a few seconds. Now tap on Turn on Radio button. Your desired sim card will successfully connect to 3G network. Now go to settings and sim card option and activate the disabled sim card as well.......All these network related issues will be hopefully solved in the next Yureka ota software/firmware update.......
Click to expand...
Click to collapse
this seems to work for me. i didn't have to reboot anytime during the procedure.
but, if you were to reboot for any reason, this has to be repeated.
any permanent solution yet? here are the steps i took (in pics)....

m0han said:
this seems to work for me. i didn't have to reboot anytime during the procedure....
Click to expand...
Click to collapse
tried this after upgrading to cm12s. works there too. wonder why there is no permanent fix yet.

m0han said:
tried this after upgrading to cm12s. works there too. wonder why there is no permanent fix yet.
Click to expand...
Click to collapse
After updating to lollipop my phone doesnt show any networks.. Its actually detecting the simcards.. i manually tried to register on the network,but it failed.very rarely am getting the signal when i went upstairs.. pls help
---------- Post added at 04:06 PM ---------- Previous post was at 03:45 PM ----------
maheshbabu9999 said:
There is also software based bug for network mode. I have personally experienced this i.e. network mode doesn’t change in reality even if I select 3g mode. So, to force your particular sim card to switch to 3g only mode, first deactivate/disable other sim card on Yureka from setting> sim cards menu. Then dial *#*#4636#*#* > phone information. Tap on Turn off radio button and wait until the button reads turn on radio. Select WCDMA only from dropdown menu above the button. Wait a few seconds. Now tap on Turn on Radio button. Your desired sim card will successfully connect to 3G network. Now go to settings and sim card option and activate the disabled sim card as well. You may need to manually search for network signal if no network is shown. Also you may need to restart the device. If in 3g mode, your phone doesn’t connect to internet, Go to apn setting to ensure correct apn is selected. Sometimes APN menu might not show any installed network settings, in such case, just restart the handset. All these network related issues will be hopefully solved in the next Yureka ota software/firmware update.
after you did this you need to reboot your device......
Click to expand...
Click to collapse
by default it as on GSM only option.. i cant change it to other mods.. pls help

Thanxx a lotttt
I was dying to find a solution for this finaly found it.I thought it was some network issue and not a bug but due to this site I found it was bug and solved it awesome

Same Problem
I am also facing the same problem but when I am at home it shows emergency calls only and when I am out the network appears. It frequently comes and goes off. When I am inserting the my Uninor sim in other handset the network is working perfectly at home but it shows emergency calls only or no service in yurekha (upgraded).
Please I am waiting for the solution. Thanks in advance.

my yureka plus is went into emergency calls mode. i am able to receive calls and messages. i am unable to read messages and it is not allowing me to open calls or to open settings.

I tried the above procedure but it does not change to wcdma it remains on GSM only mode. What can I do further. Help needed.

In my yu I have problem that .. it is connected to mobile data but no internet in chrome etc browsers ... but the net connected during uding of Facebook. . Plz give me solution

i alreday try to *#*#4636#*#*
but still i am facing same problem when i go outside my home i got network but inside home emrgency call
and i have idea airtel sim other both sim working and some time flightmode automatically . heating issue and 10hrs charging time
few days ago i have problem restarting i submit my phone yu store for repairing after reparing i am facing these kind of problem.
so please help me qucikly .

network
I also tried the above procedure but it does not working. My Dolphin sim card is working correctly but I have airtel 4g sim card. Only show sim card not connect any 2g, 3g, 4g network. Same problem are in any sim card. Please help me.

my yu yureka is not catching wifi signal there is poor wifi connection and in other devices signal are strongand in yu yureka its weak

N'ayam Amarsh'e said:
It's not a question thread! Is it? This thing's already poted in forums and everyone knows it., but thanks. Please edit your Topic.
Click to expand...
Click to collapse
hiiii
i have yureka mobile...
i tried as u said .but in my mobile after entering *#*#4636#*#* my already with turn on mode only. if i try to off that its not happening ..
so please give me the solution for this.
If u have any software for this or any other process please tell me friend i will solve my problem.....
please tell me the answer here or u can mail me at ([email protected])........thank u ..

yu yuphoria
my phone is not able to detect any operator. it is showing like "no service- operator". example my operator is reliance. it is showing "no service- reliance". I tried all possible known ways like searching for network manually n also method like going to *#*#4636#*#* n all... but there is no change in it. can anyone please help me to get out of this.
I tried resetting phone also. but no result.
please help me.

I have dual 4g phone. But when i select wcdma only for 1st sim. Second sim doesnt get range. It gets range only if i select gsm only on first sim

Hi
In my yureka mobile, Sim 1 is suddenly getting disconnected and not detected. I tried to swap the sims then again the problem persist with same sim but not the sim1 slot. I am using the mobile with same sim cards from more than 20 months. But this peculiar issue started occurring from last week. Again the sim is getting detected only after restarting the mobile. I am facing this issue more than 10 times a day. Can you please provide me the resolution.

Bhaskarabg said:
Hi
In my yureka mobile, Sim 1 is suddenly getting disconnected and not detected. I tried to swap the sims then again the problem persist with same sim but not the sim1 slot. I am using the mobile with same sim cards from more than 20 months. But this peculiar issue started occurring from last week. Again the sim is getting detected only after restarting the mobile. I am facing this issue more than 10 times a day. Can you please provide me the resolution.
Click to expand...
Click to collapse
Same problem.. Have u got any solutiom

Have tried *#*#4636#*#* no use at all, Still no signal
after flashing cm12.1 my phone stopped getting network..... i have tried every possible way to fix it( APN, network selection, powering off, deactivating- activating, *#*#4636#*#*, etc....)
Please Help its urgent:crying::crying::crying::crying:

SIM 2 voice problem solved for Cm12 rom on Galaxy Grand 2(Temporary)

Today i am showing u how to fix sim 2 voice bug on cm12 rom.
Im currently using cm12 rom v3.2
I hope my trick will be work in all kind cm12 version rom which built by mukulsoni.
1st i wanna told u that trick is temporary fix for voice by switching 3g on "preferred network type"
I mean only 3g network type could be use voice on both sim.
Go to setting>
click mobile networks and then click sim 2
Switch preferred network type on 3g.
Now call someone for test.
Remember one thing,
Both sim voice will be work by switching on 3G type network.
For more help plz watch this video.
https://youtu.be/HPd97P3JvgQ
Hit the thanks button if u helped from me

still not working

not working plz do some thing

Dual Sim not working. Only one sim works at a time

After making some changes in service menu, i am unable to use dual sim functionality. I can use only one sim slot at a time. The other one shows no network available. Regardless of which sim slot i use. In service menu sim slot 1 can be set to any preferred network but sim slot 2 is stuck in gsm only mode. Manually searched for network but no network available. Flashed latest oos 3.1.0,still the same issue. Can anyone help me with this.
Thanks in advance

Just restore whatever change you did in service menu and you should be back, you should not have played around in there from the beginning ?

pitrus- said:
Just restore whatever change you did in service menu and you should be back, you should not have played around in there from the beginning ?
Click to expand...
Click to collapse
Service menu doesn't have an option to reset to default and i don't remember exactly what changes i made. Yea i shouldn't have touched the service menu. If there's any thing else that can be done. Thanks for the quick reply

I think you changed radios to be only 3g/4g and your carriers uses the same band
Sent from my ONE A2005 using Tapatalk

fburgos said:
I think you changed radios to be only 3g/4g and your carriers uses the same band
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I'm not sure what changes I've made but yes both providers use band 40 2300 mhz for lte. I've tried changing one of the sim to use only 2g so that both sims are on different band but still same issue.

If you are in an area where carrier uses exclusively LTE that's the problem, opt radio is dual standby it alternate between two signals in any of the combinations 2g-3g/lte but not 3g-3g or lte-lte
Sent from my ONE A2005 using Tapatalk

fburgos said:
If you are in an area where carrier uses exclusively LTE that's the problem, opt radio is dual standby it alternate between two signals in any of the combinations 2g-3g/lte but not 3g-3g or lte-lte
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
My phone was working fine few days ago. I messed up something in service menu, after that the problem started. I have set one of the sim to use 2g manually, still i can't find any signal and both carriers use 3 different bands.

Have you found any solution i am facing exact same issue after changing network band. please help

fburgos said:
I think you changed radios to be only 3g/4g and your carriers uses the same band
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
How to reset radio band i am facing same problem. I tried factory reset, restore old twrp EFS backup, clean flashing stock rom, flashing cm14.1. But problem is still there please help.

Finally......
Hello guys i solved this issue by flashing oxygen os 2.2.0 now my both sim are working fine.
Just flash oxygen os 2.2.0 which has dual SIM preference selection fix.

shan1990 said:
Finally......
Hello guys i solved this issue by flashing oxygen os 2.2.0 now my both sim are working fine.
Just flash oxygen os 2.2.0 which has dual SIM preference selection fix.
Click to expand...
Click to collapse
No wifi, no simcards detected...

Can you explain how it makes it work?

Here is a good read about such dual-sim issues (esp. posts #3,4):
https://forums.oneplus.net/threads/dua-sim-detection-problem-only-one-sim-being-detected.430976/

I'm a noob with this stuff, I read that forum and I'm still unclear... Is there a work around or am I screwed? Is it the phone/Software or my sim cards?

Here is the solution
In order to solve the problem go to service menu by dialing *#*#4636#*#* then turn off radio then select radio band 32 when it says successful, restart your phone and the problem will be solved
Say thanks at fb.com/suri131
You can contact for any other issue too

Finally solved the issue
I too faced similar issue and solved it now. I'll share my observations here.
I had 2 4g Sims Airtel and Jio. Jio for data. Both the sim's were working fine , once i went into roaming suddenly after that airtel stopped latching to network. Whatever sim slot i put my airtel sim it's not getting network if in the other slot Jio is there. I tried to use my airtel sim in other phones and it's working fine. I tried putting only airtel sim it's working fine in my OP2. I thought this may be imei problem and checked imei , my OP2 has both imei in it.
So now the fix part , for me 4g sim was working fine so tried fixing the other one in sim slot 1 i.e.. airtel.
*Install and open Shortcut Master(Lite).
*Menu->Search->Type "Engineering" -> Select "EngineerMode" from Search result (package name:com.android.engineeringmode.EngineeringMode) ->Launch.
*Click Network Set
*Click Sim Card Select -> sim 1
*Click Rat mode ->Select GSM only
*Click band mode->Select PGSM 900/1800
Now turn on Airplane mode on /off wait for a minute you should see both network.
Summary: In OP2 one slot will be 4g / other will be GSM 2g... So whichever sim is working for you don't change settings for that sim , play with the other sim for which no network is coming.

Abidbhat said:
Finally solved the issue
I too faced similar issue and solved it now. I'll share my observations here.
I had 2 4g Sims Airtel and Jio. Jio for data. Both the sim's were working fine , once i went into roaming suddenly after that airtel stopped latching to network. Whatever sim slot i put my airtel sim it's not getting network if in the other slot Jio is there. I tried to use my airtel sim in other phones and it's working fine. I tried putting only airtel sim it's working fine in my OP2. I thought this may be imei problem and checked imei , my OP2 has both imei in it.
So now the fix part , for me 4g sim was working fine so tried fixing the other one in sim slot 1 i.e.. airtel.
*Install and open Shortcut Master(Lite).
*Menu->Search->Type "Engineering" -> Select "EngineerMode" from Search result (package name:com.android.engineeringmode.EngineeringMode) ->Launch.
*Click Network Set
*Click Sim Card Select -> sim 1
*Click Rat mode ->Select GSM only
*Click band mode->Select PGSM 900/1800
Now turn on Airplane mode on /off wait for a minute you should see both network.
Summary: In OP2 one slot will be 4g / other will be GSM 2g... So whichever sim is working for you don't change settings for that sim , play with the other sim for which no network is coming.
Click to expand...
Click to collapse
it worked instantly

Abidbhat said:
Finally solved the issue
I too faced similar issue and solved it now. I'll share my observations here.
I had 2 4g Sims Airtel and Jio. Jio for data. Both the sim's were working fine , once i went into roaming suddenly after that airtel stopped latching to network. Whatever sim slot i put my airtel sim it's not getting network if in the other slot Jio is there. I tried to use my airtel sim in other phones and it's working fine. I tried putting only airtel sim it's working fine in my OP2. I thought this may be imei problem and checked imei , my OP2 has both imei in it.
So now the fix part , for me 4g sim was working fine so tried fixing the other one in sim slot 1 i.e.. airtel.
*Install and open Shortcut Master(Lite).
*Menu->Search->Type "Engineering" -> Select "EngineerMode" from Search result (package name:com.android.engineeringmode.EngineeringMode) ->Launch.
*Click Network Set
*Click Sim Card Select -> sim 1
*Click Rat mode ->Select GSM only
*Click band mode->Select PGSM 900/1800
Now turn on Airplane mode on /off wait for a minute you should see both network.
Summary: In OP2 one slot will be 4g / other will be GSM 2g... So whichever sim is working for you don't change settings for that sim , play with the other sim for which no network is coming.
Click to expand...
Click to collapse
Hey man. Installed a custom based on android 12 and i'm not sure what happened but only one sim card was working. Used msm tool to go back to oos 12 and now only one sim card shows.
Was going to try your method but the "engineeringmode" does not show up in search.
Any suggestions?

Data is connecting with my jio sim card in sim 1

Device- Redmi 3s (land)
Rom- pixel experience Android 10
I'm currently using using pixel experience based Android Q and Volte is working in sim 1 but I can't connect to data/Internet. Whether that sim works in sim slot 2 but pixel experience Android Q don't have volte in sim 2. So I can't make calls using JIO network sim card. If you guys can help then pls do. And I don't want to go back to miui (pls don't suggest me that) don't know what to do

Avinash_s10 said:
Device- Redmi 3s (land)
Rom- pixel experience Android 10
I'm currently using using pixel experience based Android Q and Volte is working in sim 1 but I can't connect to data/Internet. Whether that sim works in sim slot 2 but pixel experience Android Q don't have volte in sim 2. So I can't make calls using JIO network sim card. If you guys can help then pls do. And I don't want to go back to miui (pls don't suggest me that) don't know what to do
Click to expand...
Click to collapse
Change your sim network type to WCDMA only and wait some seconds. Now you have 3G data! After your connection established change again sim network type to GSM/WCDMA/LTE or your preferred type and will connect to 4G. Many people have same problem but there is not yet solution. Need this trick every time restart your phone. I hope this helps you for now.

ivaitsis1974 said:
Change your sim network type to WCDMA only and wait some seconds. Now you have 3G data! After your connection established change again sim network type to GSM/WCDMA/LTE or your preferred type and will connect to 4G. Many people have same problem but there is not yet solution. Need this trick every time restart your phone. I hope this helps you for now.
Click to expand...
Click to collapse
Here jio have only 4g network.it don't have 2g/3g network so WCDMA won't work for me. Can you tell me why this issue happens?
I think i have to revert back to android pie.

Avinash_s10 said:
Here jio have only 4g network.it don't have 2g/3g network so WCDMA won't work for me. Can you tell me why this issue happens?
I think i have to revert back to android pie.
Click to expand...
Click to collapse
Don't now the reason. In my case same problem with pie roms