Moto G4 got stuck - Moto G4 Questions & Answers

My friend tried to root his moto g4. Now his phone got stuck. When he starts his phone it enters the fastboot mode and when he tries to connect it with pc it says usb not recongized. Oem is locked and usb debugging is off. And when i try to enter in recovery mode it comes back to fastboot mode. Any solutions?

Pranill said:
My friend tried to root his moto g4. Now his phone got stuck. When he starts his phone it enters the fastboot mode and when he tries to connect it with pc it says usb not recongized. Oem is locked and usb debugging is off. And when i try to enter in recovery mode it comes back to fastboot mode. Any solutions?
Click to expand...
Click to collapse
He should unlock bootloader before root. Yes there is solution. You must install all need drivers. Then try computer see your phone as qualcomm driver. If it is not recognized, try soft mode or safe mode or something in your computer and then try after restart, try many times. After seen as qualcomm driver you must run flashbat or flashbank bat file via administrator maybe or not for write bootloader and then type run commands in fastboot via computer. Files is next thread: search google - guide how to unbrick noto g4 plus. Desktop in one folder must be all files - adb and fastboot or something whats name, flashbank.bat file, stock rom files. I had same problem and solved for me but bootloader was unlocked. Main is that your phone must seen as qualcomm driver, first time mine was usb not recognized and then changed computer soft or safe or something different mode on or off

Related

nexus 6p not showing on device manager

Hi, my 6p will not show up on my PC. Have tried installing drivers, different PC, different cable but nothing works.
I recently upgraded to android O. I extracted the files from system image and flashed boot image, vendor image, and system. But now when I try to go into recovery it says no command and I lost root access but my bootloader is unlocked. I never flashed the recovery thinking TWRP would stay intact but I guess I was wrong. Normally I would just use ADB and fix it but hence my problem. Is there any way to root without PC or any way I can fix my situation?
Having the same exact issue here, hope someone has a way to fix it.
sonysingh1983 said:
Hi, my 6p will not show up on my PC. Have tried installing drivers, different PC, different cable but nothing works.
I recently upgraded to android O. I extracted the files from system image and flashed boot image, vendor image, and system. But now when I try to go into recovery it says no command and I lost root access but my bootloader is unlocked. I never flashed the recovery thinking TWRP would stay intact but I guess I was wrong. Normally I would just use ADB and fix it but hence my problem. Is there any way to root without PC or any way I can fix my situation?
Click to expand...
Click to collapse
So your phone will boot into the OS, or not? If so, make sure USB debugging is set to "on" in Developer Settings. Can you put your device in fastboot mode by holding down the volume down button before hitting the power button? The "no command" means you are in (stock) recovery. You then have to hold the power button down while using the volume buttons to navigate. Power button is confirm. Get your phone into bootloader mode and use ADB to flash TWRP again. @meoshe
v12xke said:
So your phone will boot into the OS, or not? If so, make sure USB debugging is set to "on" in Developer Settings. Can you put your device in fastboot mode by holding down the volume down button before hitting the power button? The "no command" means you are in (stock) recovery. You then have to hold the power button down while using the volume buttons to navigate. Power button is confirm. Get your phone into bootloader mode and use ADB to flash TWRP again. @meoshe
Click to expand...
Click to collapse
Yes phone is working fine. Debugging is on. Can't use ADB phone does not get recognized by PC, only charges. Dint even get the pull down notification once I connect usb. Tried changing connection to mtp in developer options also. Nada. Nothing works to fix it. I'm thinking my charging port might have something wrong with it I don't know. I'm stuck not having root atm.
sonysingh1983 said:
Yes phone is working fine. Debugging is on. Can't use ADB phone does not get recognized by PC, only charges. Dint even get the pull down notification once I connect usb. Tried changing connection to mtp in developer options also. Nada. Nothing works to fix it. I'm thinking my charging port might have something wrong with it I don't know. I'm stuck not having root atm.
Click to expand...
Click to collapse
Gotcha. What about the other points? Entering bootloader mode from a powered off state, and that you are in Recovery mode (no command), and navigating thru it with the power+volume buttons?
v12xke said:
Gotcha. What about the other points? Entering bootloader mode from a powered off state, and that you are in Recovery mode (no command), and navigating thru it with the power+volume buttons?
Click to expand...
Click to collapse
Yes that works. Thank you. But still can't root phone and can't flash TWRP. Was looking at a root APK but not sure if they will work with O. If I could root then I could install TWRP thru it's app but I need root for that.
You can't root the phone until you have a working custom recovery. Focus on either fastboot flashing or fastboot booting TWRP.img
v12xke said:
You can't root the phone until you have a working custom recovery. Focus on either fastboot flashing or fastboot booting TWRP.img
Click to expand...
Click to collapse
How do I go about fastboot booting TWRP image?
I can get into bootloader from phone but I can't use a PC.
I did read your OP, but this sounds like a driver issue. There are two drivers that need to be installed first the USB and then fastboot. Since you can boot the device and use it, maybe you should try NRT by Wugfresh to install, test and confirm the drivers are properly installed. Booting or flashing TWRP is just a different command. Instead of fastboot flash recovery twrp.img, you use fastboot boot recovery recovery.img. The NRT toolkit can also either boot or flash a recovery image.
EDIT: Also try "Revoking ADB debugging" and re-enabling @sonysingh1983
sonysingh1983 said:
Yes phone is working fine. Debugging is on. Can't use ADB phone does not get recognized by PC, only charges. Dint even get the pull down notification once I connect usb. Tried changing connection to mtp in developer options also. Nada. Nothing works to fix it. I'm thinking my charging port might have something wrong with it I don't know. I'm stuck not having root atm.
Click to expand...
Click to collapse
Hi, just tried the mtp setting in developer options. Didn't get it the first time but now am able to access internal storage. I have plug sound app from play installed and I get a notification sound when plugging and unplugging. First try there was no sound when changing from charging to mtp. Ok after repeating it. Hope that helps.
Just as a follow up I got my win10 pc to recognize my O flashed nexus. I booted into bootloader after I had updated my sdk and drivers through android studio. It recognized the phone but nothing was happening. I rebooted into the os and the access allow prompt popped up on the phone and adb was able to see it under listed devices.

H E L P - bootlooping, COM does not recognize phone

Hi everybody,
ill try to make it short:
My 6p has entered into the bootlooping mode.
I have never unlocked the bootloader/changed ROM/kernal.
After I let it bootloop until the battery is dead it's changing from bootlooping into blinking red dot. Then when I charge it for a couple of minutes it comes back to life after 10~ min it's bootlooping again - so I have a window of possibilities to play with the setting. In that window I have used the "OEM unlocking" option.
In the bootlooping state when I boot into the bootloader and connect it into the PC the device doesn't recognize that it has been connected and a PC ,and the PC recognize a entry of new device but doesn't recognize it is a Nexus 6p.
this situation is the same when I connect the phone when it is alive.
I have installed adb and fastboot with this software
https://forum.xda-developers.com/showthread.php?t=2588979
with the 1.4.3 version it shows in the end of the process "0 files copied" and then I tried the 1.3 version and it showed that 4 files were copied but it also showed an error.
I have also downloaded ADB from google site but it does not work either.
When I try to open the powershell in a folder where I have downloaded an img and type in a fastboot command the computer doens't recognize any type of command.
So if anyone can help me ill be glad.
Thanks in advance,
Matan.
matan4442 said:
Hi everybody,
ill try to make it short:
My 6p has entered into the bootlooping mode.
I have never unlocked the bootloader/changed ROM/kernal.
After I let it bootloop until the battery is dead it's changing from bootlooping into blinking red dot. Then when I charge it for a couple of minutes it comes back to life after 10~ min it's bootlooping again - so I have a window of possibilities to play with the setting. In that window I have used the "OEM unlocking" option.
In the bootlooping state when I boot into the bootloader and connect it into the PC the device doesn't recognize that it has been connected and a PC ,and the PC recognize a entry of new device but doesn't recognize it is a Nexus 6p. Matan.
Click to expand...
Click to collapse
What is the new device identified as....Qualcomm HS-USB QDLoader 9008? Your phone may be stuck in EDL mode. If that is the case you need to search XDA and attempt solutions for that problem first.
Did you previously have your PC setup properly with the correct USB drivers and it was working OK, or just now trying to get your dead phone to communicate? If the former it may be the EDL issue above. If it was the latter, the communication problem may just be the drivers were never set up in the first place. Have you tried a different cable or port on your PC, or another PC?
With no access to the OS you will be unable unlock the bootloader or access to ADB because those have to be enabled FIRST in the OS, so there's no helping you here until you can actually boot into the OS. Do you have access to Recovery mode? Tried a factory reset? If you don't have recovery, that was a major omission.

Axon 7 EDL Mode Not Working/ can't boot to EDL

My Axon 7 is the A2017U, i had the B32 Nougat running on it and wanted to try the new lineageos 15.1, but had to unlock my bootloader first i used the toolkit like I've done in the past and was able to unlock it and flash twrp, when i try to boot it back on it goes to factory testing mode, i was able to get into twrp and i wiped everything and it stopped the problem of booting directly to FTM but after that i tried to go into EDL mode and it seemed to try to enter the mode but the red led indicator light stays on rather than doing a quick blink. its no longer picked up as a COM port, when i enter fastboot mode adb doesn't seem to work and I'm unsure what to do or if I'm out of luck. Thank you for your time and the advice and help you guys are able to provide.
use ADB
Enable ADB in developer options
use command "adb reboot edl"
Used Twrp to flash Custom ROM, EDL still not fixed
sauerkraut17 said:
use ADB
Enable ADB in developer options
use command "adb reboot edl"
Click to expand...
Click to collapse
I had no OS installed, only twrp recovery and I was able to unlock my boot loader. I tried to flash Lineage-OS ROM in twrp and didn't have much luck because i would get an error code saying it wasn't compatible with my phone and had to go into the ROM files and edit the updater-script file to remove the compatibility check.
In the end I have a working phone with a custom ROM but EDL mode is still not responsive and seems to freeze my phone as soon as I press the 3 buttons to get into EDL. the notification light blink remains on so ill take it as an indicator that something is wrong with the firmware that it uses. i still want to fix it so EDL can be used but unsure how to fix it. I did some researching and was wondering if using a deep flash Engineering cable would work to fix the EDL mode and any other problems that could be there.
levittc5280 said:
I had no OS installed, only twrp recovery and I was able to unlock my boot loader. I tried to flash Lineage-OS ROM in twrp and didn't have much luck because i would get an error code saying it wasn't compatible with my phone and had to go into the ROM files and edit the updater-script file to remove the compatibility check.
In the end I have a working phone with a custom ROM but EDL mode is still not responsive and seems to freeze my phone as soon as I press the 3 buttons to get into EDL. the notification light blink remains on so ill take it as an indicator that something is wrong with the firmware that it uses. i still want to fix it so EDL can be used but unsure how to fix it. I did some researching and was wondering if using a deep flash Engineering cable would work to fix the EDL mode and any other problems that could be there.
Click to expand...
Click to collapse
EDL using the volume/power button has issues with the newer bootstack (which it sounds like you're on). However, since you have an OS now do as I recommended. It will 'reset' the EDL and once done via ADB command it will work with the volume/power buttons like it did before moving forward.
sauerkraut17 said:
EDL using the volume/power button has issues with the newer bootstack (which it sounds like you're on). However, since you have an OS now do as I recommended. It will 'reset' the EDL and once done via ADB command it will work with the volume/power buttons like it did before moving forward.
Click to expand...
Click to collapse
Using the ADB command i was able to get into EDL mode and it was able to get a COM port. using the volume + power buttons had the same problem. Would using an older bootstack fix it?
levittc5280 said:
Using the ADB command i was able to get into EDL mode and it was able to get a COM port. using the volume + power buttons had the same problem. Would using an older bootstack fix it?
Click to expand...
Click to collapse
Have the same issue as you do after installing the bootstack. but even with the adb reboot edl command my phone just restarts normally.. But my OS is working fine, is there any way?
Try to use volume up and volume down only and plugging in USB cable........
stinka318 said:
Try to use volume up and volume down only and plugging in USB cable........
Click to expand...
Click to collapse
Tried everything already. Can only get to DFU mode..
So, I have a similar problem: after flashing a new version of TWRP, now Recovery doesn't start. The problem is that I haven't any OS installed and the last chance to save the phone should be reflash stock by EDL... BUT EDL mode doesn't start if I press vol UP + vol DOWN during power on... (it became black with a red light, but if I digit "ADB devices" on ADB, no devices seems connected, and in the same way it's impossible to use Axon7Toolkit). So: no Recovery, no EDL mode, no OS installed, my phone is a paperweight.
Is there a method to save my Axon 7?
Here is something to try ...
Enter edl via button combo (volup + voldn + pwr)
You should have a black screen ...
Now plug your phone into the cable on your PC/laptop ..
If your PC / laptop doesn't recognise your phone via Miflash or app you are using ...
Try tapping the power button once ...this seems to open/close the port ...
I noticed this when I was using edl mode to flash a ROM
I hope this helps
levittc5280 said:
My Axon 7 is the A2017U, i had the B32 Nougat running on it and wanted to try the new lineageos 15.1, but had to unlock my bootloader first i used the toolkit like I've done in the past and was able to unlock it and flash twrp, when i try to boot it back on it goes to factory testing mode, i was able to get into twrp and i wiped everything and it stopped the problem of booting directly to FTM but after that i tried to go into EDL mode and it seemed to try to enter the mode but the red led indicator light stays on rather than doing a quick blink. its no longer picked up as a COM port, when i enter fastboot mode adb doesn't seem to work and I'm unsure what to do or if I'm out of luck. Thank you for your time and the advice and help you guys are able to provide.
Click to expand...
Click to collapse
I had the same problem a few days ago. When I booted to EDL Mode the red led was instantly on but the PC recognized it somthing like ZTE Handset Device Mode.
1. You can download TWRP Treble by NFound and flash it via your TWRP. Then reboot to recovery again and under the reboot tab its possible to boot to EDL/9008 Mode.
2. You build a EDL Cable to get the device from the red light to EDL mode. Just open some usb cable and connect the green and black (all four) together, plug it in the device and press the power button
until the red light is gone and hold on two additional seconds. Then remove the cable and plug another working cable in and the PC recognize it as Qualcomm in EDL mode.
This is literally how I unbricked my device.
Syberclone said:
Here is something to try ...
Enter edl via button combo (volup + voldn + pwr)
You should have a black screen ...
Now plug your phone into the cable on your PC/laptop ..
If your PC / laptop doesn't recognise your phone via Miflash or app you are using ...
Try tapping the power button once ...this seems to open/close the port ...
I noticed this when I was using edl mode to flash a ROM
I hope this helps
Click to expand...
Click to collapse
Thanks, I tried but this doesn't solve my problem. The strange thing is that connecting my phone in EDL mode, the phone appears in device manager as COM port, but is not seen launching an "ADB devices" command and is not seen in MiFlash too. I tried to change drivers from "ZTE device (something)..." to "Qualcomm HS-USB QDLoader 9008" and in this way, although ADB doesn't detect nothing yet, MiFlash detects a COM port, but flashing an EDL image still fails with a "cannot receive hello packet" error.
Now I ordered a deep flash cable, hope this can solve... next week I'll know if it works.
Thanks, I tried but this doesn't solve my problem. The strange thing is that connecting my phone in EDL mode, the phone appears in device manager as COM port, but is not seen launching an "ADB devices" command and is not seen in MiFlash too. I tried to change drivers from "ZTE device (something)..." to "Qualcomm HS-USB QDLoader 9008" and in this way, although ADB doesn't detect nothing yet, MiFlash detects a COM port, but flashing an EDL image still fails with a "cannot receive hello packet" error.
Now I ordered a deep flash cable, hope this can solve... next week I'll know if it works.
Click to expand...
Click to collapse
Did you resolve problem?
spasacamen said:
Thanks, I tried but this doesn't solve my problem. The strange thing is that connecting my phone in EDL mode, the phone appears in device manager as COM port, but is not seen launching an "ADB devices" command and is not seen in MiFlash too. I tried to change drivers from "ZTE device (something)..." to "Qualcomm HS-USB QDLoader 9008" and in this way, although ADB doesn't detect nothing yet, MiFlash detects a COM port, but flashing an EDL image still fails with a "cannot receive hello packet" error.
Now I ordered a deep flash cable, hope this can solve... next week I'll know if it works.
Click to expand...
Click to collapse
No need to order that cable... If you still can cancel it i'd tell you to do that. You made a mistake by changing the drivers, you had the "ZTE Handset Diagnostic Interface (DFU)" driver, and replaced it with the EDL driver.
This of course does not work because your phone is in DFU MODE instead of EDL. What you have to do is uninstall the device via device manager and also tick "Uninstall driver software for this device", then turn the phone off and enter DFU again, and then use MultiDL from this forum to enter EDL. After that, use MiFlash or EDL Tool, and try flashing a FULL EDL file
By the way ADB will only work on FTM mode or the recovery or on a working system. You won't get ADB on edl mode or dfu mode because they simply don't have adb working, it's normal
i never use xda but this quote thing is what i have aswell
levittc5280 said:
Using the ADB command i was able to get into EDL mode and it was able to get a COM port. using the volume + power buttons had the same problem. Would using an older bootstack fix it?
Click to expand...
Click to collapse
all i see is the red light in edl, whatever i try it Always just goes to a red light and a black screen. this happened after trying to unlock the bootloader. i was in android 8 and tried to lock it, it messed it up as my Phone could not boot anymore, i flashed the stock android 6.0 or something that came with the axon 7 toolkit and it did work but when trying to unlock the bootloader as the device state suddenly was locked it broke the whole thing and i oped edl could save me but even that is broken just like what the person in the quote has
Well the only fix to get EDL mode is through test point, there's a thread of unbricking Axon 7 using test point, find it, you'll need to open your back cover to do this
This in case nothing works to get into EDL mode.

Grand Prime G530FZ HARD BRICK

Hi, i can't go to download mode / recovery mode, when i try to turn on it, i see only black screen, i tried to remove and reinsert the battery,i tried with different combinations to turn on the smartphone, when i plug the smartphone to pc , while trying to turn on, i usually listen the sound of recognized USB from windows, but from the device manager i see only Unknow Device, i'm sure i have the correct drivers because before this problem, odin recognized that.
USB JGI doesn't work...
EDIT: i tried adb and fastboot commands but it doesn't recognize anything.

Question Nothing Phone 1 hard bricked (Edl Mode)

Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
pogradecari said:
Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
Click to expand...
Click to collapse
Try holding power+volup+voldown with the phone unplugged from a computer.
If it doesn't work, let me know.
how to boot to edl mode ??
Try this :
Install ADB and Minimal Fastboot drivers through which Windows will recognize your Device.
Enable USB Debugging on your Android Device. You can do this simply by following the given direction:
Settings > About Phone > tap 7 times on the Build Number. This will enable Developer options on it.
Now, again go back to the main Settings > Developer options > USB Debugging and Enable it.
Connect your smartphone with your PC via a USB cable.
Open Command Window by the press and hold Shift Key + right-click of your Mouse.
Choose Open Command Window here.
Type the following command and press the Enter button to check whether the device is connected or not.
" adb devices "
You will see a device serial code on the screen. That means it is successfully connected. Then follow the next step.
Type the command from below and hit enter to Boot into Download Mode (EDL Mode):
" adb reboot edl " or "fastboot oem edl" or "fastboot reboot-edl" or "fastboot reboot edl"
muppetz said:
Try this :
Install ADB and Minimal Fastboot drivers through which Windows will recognize your Device.
Enable USB Debugging on your Android Device. You can do this simply by following the given direction:
Settings > About Phone > tap 7 times on the Build Number. This will enable Developer options on it.
Now, again go back to the main Settings > Developer options > USB Debugging and Enable it.
Connect your smartphone with your PC via a USB cable.
Open Command Window by the press and hold Shift Key + right-click of your Mouse.
Choose Open Command Window here.
Type the following command and press the Enter button to check whether the device is connected or not.
" adb devices "
You will see a device serial code on the screen. That means it is successfully connected. Then follow the next step.
Type the command from below and hit enter to Boot into Download Mode (EDL Mode):
" adb reboot edl "
Click to expand...
Click to collapse
my phone is bricked while flashing stock rom via fastboot
so unable to boot to recovery or bootloader
To begin with, power off your device. If you can’t do so, then you will have to wait until the battery completely drains out.
Now connect one end of the USB cable to your PC, but don’t attach the other end to the device.
Press and hold the Volume Up and Volume Down buttons together for a few seconds.
Now connect the other end of the device to the USB cable.
Your device will now be recognized as Qualcomm HS-USB QDLoader 9008. You may now flash the device-specific firmware to unbrick it.
Even you have a black screen , PC does recognize your phone . Use only a USB 2.0 port . Verify if Qualcomm USB Driver have been installed on Windows .
muppetz said:
To begin with, power off your device. If you can’t do so, then you will have to wait until the battery completely drains out.
Now connect one end of the USB cable to your PC, but don’t attach the other end to the device.
Press and hold the Volume Up and Volume Down buttons together for a few seconds.
Now connect the other end of the device to the USB cable.
Your device will now be recognized as Qualcomm HS-USB QDLoader 9008. You may now flash the device-specific firmware to unbrick it.
Even you have a black screen , PC does recognize your phone . Use only a USB 2.0 port . Verify if drivers have been installed on Windows .
Click to expand...
Click to collapse
tried these steps but phone goes in 900E mode
OK , look then at this :
muppetz said:
OK , look then at this :
Click to expand...
Click to collapse
it does not work as he just changed the drivers from diagnostic mode to qdloader mode
pogradecari said:
Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
Click to expand...
Click to collapse
Maybe it's too late already but you can unbrick the phone with this tool
Unbrick / Flash Stock Rom (1.1.7 global) QDLoader 9008 fix | EDL Mode fix
Hi everyone, If your phone (1) does not react on any of yours actions. You may have the same problem. This is an instruction how to fix it without Disassembly. ‼️ Do this at your own risk, I am not responsible for any damage that may occur to...
forum.xda-developers.com
none of these will work
pogradecari said:
none of these will work
Click to expand...
Click to collapse
Why? Have you tried?

Categories

Resources