Related
EDIT : I somehow managed to flash CWM Recovery using fastboot then I wiped all data (didn't really matter, since I saved important files to cloud server).
__________Hello,
After installing the last MIUI update package to my Redmi Note 4G (from weekly updates), my phone would boot then reboot a few seconds later, making it impossible to use. Also, please notice that I only have access to fastboot mode using Vol. Down + On/Off Button.
Here's what I did :
First, I've downloaded the latest zip file from MULTI 5.3.13 | Unofficial International MIUI forum thread.
Then, I used the Updater app to install it directly from the Download file.
It installed it, then rebooted to MIUI v5 (I had MIUI v6)
Now everytime I boot my phone it boots normaly but reboot 5 secs later.
I did research and I tried to flash Developer ROM following english MIUI forum.
No success
I need help getting my phone back, even if I may loss all data
Phone : Xiaomi Redmi Note 4G -HM NOTE 1LTEW
Since, the release of the Android M. Google make it hard to root your device. On MIUI 8 with marshmallow I have been trying to figure out a way to root my device. In almost every case I found myself in a boot loop. So after a long work i finally succeed to root my redmi note 3 with no error and bootloop.
I am not responsible for any damage to your devices,loss or damage caused, or alleged to have been caused, directly or indirectly, by the informations or ideas suggested or referenced, etc. If you get a boot loop you can get back to booting by simply flashing the stock "M" system image via fastboot. or Mi flash tool.
Please try at your own risk. Your warranty is now void.
PRE-REQUIREMENTS
1. redmi note 3 ( SD only) with official MiUI 8 6.9.9 developers rom (marshmallow update) :good:
2. officially unlocked bootloader.
3. TWRP recovery ( alka twrp recommended ).
4. patched boot image given below.
5.brain
METHOD RECOVERY METHOD.
1. Download boot.zip and SuperSu.zip
superSu.zip -https://www.androidfilehost.com/?fid=24727369092694142
boot.img - https://www.androidfilehost.com/?fid=24727369092694141
2. copy both the files (boot.img and SuperSu.zip) to your external SD card.
3. now reboot the device in recovery and go to mount section and mount all the partitions.
4. now go to install and go to SD card and flash SuperSu.zip.
5. as the super su is installed go back in install section and select install image.
6. now you will see only .img files so locate to boot.img and select it.
7. In next window you may see two option as " select partition to flash image:" select the first one option BOOT partition and slide the installation slider and reboot your redmi note 3 SD
boot up may take 5-10 mins so don't we panic. and please mention in the comment was it worked for you or not so I can edit boot image for you..
if i help you give me a thanks, by clicking on thanks button
I am on Miui8 6.9.15 Marshmallow, used supersu.zip, boot.img for rooting..., successfully rooted but some times when I restart the device network gone, sometimes bootloop is occurring.. So I need to flash boot.img again and again.. This is taking a lot of time.. What to do?
Just flash supersu stable using ZCX twrp. Head over supersu xda thread for latest stable flashable zip. Worked for me without any issue.
ubaid137 said:
I am on Miui8 6.9.15 Marshmallow, used supersu.zip, boot.img for rooting..., successfully rooted but some times when I restart the device network gone, sometimes bootloop is occurring.. So I need to flash boot.img again and again.. This is taking a lot of time.. What to do?
Click to expand...
Click to collapse
this boot image is only stable with MIUI 8 6.9.9. i am currently working on a universal boot image so no encryption problem occurred... please wait thanks
tsrajput said:
this boot image is only stable with MIUI 8 6.9.9. i am currently working on a universal boot image so no encryption problem occurred... please wait thanks
Click to expand...
Click to collapse
Also my wifi is not working after root..
Does AUX issue resolved in this ROM?
Yet nobody have solution on it hence; i asked.
Headphones work but AUX cable is not working.
Satav said:
Yet nobody have solution on it hence; i asked.
Headphones work but AUX cable is not working.
Click to expand...
Click to collapse
This is not a rom, its a rooting guide.
any news on this ? any new boot.img. I'm on 6.9.22 beta. thanks
The final steps to Remove "Vendor ROM" that does not have the Update Option in Settings Or Unbrick Le Max 2 or simply Update Le Max 2 to latest EUI.
NOTE: This method should address the following weird problems:
1. Le Max 2 TWRP Seeing 0MB in Internal Storage. Unable to access the ROM Storage
2. Encrypt Option Greyed Out In Settings-->Fingerprint and Security
2. Update Option missing in Settings.
3. Fingerprint Sensor not working... If it still gives trouble... Calibrate the FP Sensor in its settings. Or register the same fingerprint multiple times.
This method should work on ALL versions of Le Max 2 including X820 X829 X821
Before starting... Remove ALL USB peripherals that might interfere with the process. Use USB Ports on the PC/Laptop... DO NOT use USB Hubs... Even if the phone appears dead... Connect it Power Outlet and let it charge for an hour.
1. Download the latest Stable EUI... from LeEco Website Directly .
2. Download the FlashOne v1.9 And Service ROM From HERE.
UPDATE: FlashOne v2.0 has been released! Here's the LINK.. It is a bit more advanced and offers the ability to format User Data for a Cleaner Flash
3. Download Qualcomm Drivers
4. Put Le Max 2 in EDL (Emergency Download Mode) by pressing Volume +, Volume - and Power Button Simultaneously. For those having difficulty..... Here are few tips.
Connect the Phone to PC. If the phone is Switched/Powered On... Then Power Off the phone and Switch Back On with the Key Combinations.
OR
If the Phone is Switched Off... Then Use the Key Combination to put the phone in EDL Mode..
In either case..... the PC will make a sound of Disconnection and Reconnection of an USB peripheral. AND you will see Qualcomm QDLoader 9008 Driver Installation. To verify the same... go to Device Manager in Win 7 / Win 10 and Under Ports (Com & LPT)... you should see Qualcomm HS-USB QDLoader 9008 (COMXX).. The XX corresponds to a particular COM Port. Remember this port.
5. Once the Le Max 2 is in Qualcomm QDLoader 9008 EDL Mode... Start the FlashOne Software.
6. Choose “Qualcomm – flash dead phone” from the drop down menu next to “Flash type”.
7. Click “Refresh button” next to “Select Device”. Here your Le Max 2 will show up but in COM Number (ComXX)
8. Browse for our Qfil/service ROM by clicking “Select File”.... You can technically select the Latest EUI ROM... But it is safer with Service ROM. DO NOT Unzip the ROM File.
9. After everything is set up under “Settings”, Press “Flash” button.
10. Installation can take anywhere between 10 to 20 minutes. Have Patience.
There are chances that the Flashing might fail. In case it does... Simply put the phone in EDL Mode again... and restart the procedure.
11. After the FlashOne confirms successful flash... Wait for 15 - 20 seconds. Then Power On the phone by pressing the Power Button for at least 60 seconds. Do Not Panic due to the long press.. Press it until the phone vibrates.
12. The Le Max 2 should be in Developer Version of EUI with an unlocked Bootloader and STOCK recovery.
13. The Developer ROM has the “Format Virtual SD card” setting in Settings Menu--> Backup/Reset--> Factory Reset.. Use the setting to get back the 50+GB
[You can also use the option Format Data in TWRP Recovery instead and the partition will 64GB correctly instead of 10 GB initially. Read ahead for the procedure]
14. Once you have a working Le Max 2... there are two directions:
Install Latest Stable EUI ROM... with Update Option
OR Install TWRP Recovery / ROOT / Custom ROM
15. a. For those who wish to install Stock ROM... Simply rename it to "update" (DO NOT Add .zip... Else the file will look like update.zip.zip) and place the update.zip file in ROOT of the phone. Thereafter Switch Off the Phone... Enter Recovery by pressing Volume + and Power Button... Choose Update System AND the other setting to Clear All Data. Your Le Max 2 should update without any error.
15. b. For those who want TWRP and ROOT:
* Download the latest TWRP (For Le Max 2) and SuperSU from their respective websites. Download and Install ADB and Fastboot From HERE.
* Copy the SuperSU Zip File to the ROOT of the Phone.
* Unzip and Rename the TWRP recovery to Recovery (The file should be Recovery.img.... NOT Recovery.img.img)
* Put the Le Max 2 into Fastboot Mode By Pressing Volume - and Power Button
* Go to the ADB Install Folder and Press Shift & Right Click to get & select “Open command window here“. Confirm Fastboot is working by Entering Command: Fastboot Devices.. You should see a random string of letters followed by the word Fastboot. If you do not see the same..... the installation didn't complete successfully.
* In the Command Window.. Type: fastboot flash recovery recovery.img
* Enter the following Command: fastboot boot recovery.img
* Once the Phone has entered the Recovery... Flash the SuperSU Zip file and you will have ROOT capabilities.
* Take FULL Backup of your device and then install ANY Custom ROM.
Do let me know your results.
[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors.
After QFil/flashone my lemax2 still bootloops. I've tried flashing other roms via recovery but it reboots mid installation.
Any advice?
Try Another QFil / Service ROM
Yisheng said:
After QFil/flashone my lemax2 still bootloops. I've tried flashing other roms via recovery but it reboots mid installation.
Any advice?
Click to expand...
Click to collapse
My advice is try another Qfil. These files are quite large and hence the one you downloaded might have some corruption.
Try THIS File
Hi, the link to the Leeco website is down...is there any alternative for downloading the latest stable EUI?
I downloaded the 23s from another website, renamed "update" but when I try to update via recovery it fails, cause: corrupted.
Any suggestion on this?
Thanks a lot in advance
ermonnezza said:
Hi, the link to the Leeco website is down...is there any alternative for downloading the latest stable EUI?
I downloaded the 23s from another website, renamed "update" but when I try to update via recovery it fails, cause: corrupted.
Any suggestion on this?
Thanks a lot in advance
Click to expand...
Click to collapse
You may try to use twrp to flash it, you downloaded version is a twrp backup version...
Thanks for the suggestion but I'm trying to get back to stock for other phone issues... So I wanted to avoid to install twrp, if possible.
Any link to a stock rom that can be updated via stock recovery?
You know I just going to blame Android 7.0 Nougat any chance we can have a CyanogenMod 13 6.01 based foxfi friendly ROM ?
ermonnezza said:
Thanks for the suggestion but I'm trying to get back to stock for other phone issues... So I wanted to avoid to install twrp, if possible.
Any link to a stock rom that can be updated via stock recovery?
Click to expand...
Click to collapse
I used the 23s from this link: https://bbs.le.com/zt/eui/le_max2.html
I flashed it from an indian rom. It will change your bootloader to chinese, though (not really an issue). And your recovery too, I guess (don't panic, it's bilingual). It will also update /firmware, and that should help with many issues.
However, there's no need to flash TWRP in order to use it: you can just boot it ( fastboot boot TWRPname.img).
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
---------- Post added at 03:52 AM ---------- Previous post was at 03:15 AM ----------
BTW, the indian latest stock rom 5.8.019s can not be download from anywhere now. Can you give me a link that works now?
deltasata said:
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
---------- Post added at 03:52 AM ---------- Previous post was at 03:15 AM ----------
BTW, the indian latest stock rom 5.8.019s can not be download from anywhere now. Can you give me a link that works now?
Click to expand...
Click to collapse
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Akashsundar said:
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Click to expand...
Click to collapse
Yes
Akashsundar said:
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks a lot
Have any one flash this ROM
If there is any bugs reply here I will prepare fix for it
Hello...
Where can I find the original rom for le max 2 x820 with no system update please
thanks .
http://g3.letv.cn/218/24/9/letv-hdt...1S-5.9.020S.zip?b=123456&platid=5&splatid=500
Is 23S whit recovery stock.
Ok so I did as said in your post, but big problem for me : My screen is not split in two and both side are reversed.... I tried install roms goind thought twrp the problem is the same, and doing the manipulation all over again trough flashone doesn't solve my problem either. I really need someone's help on this one please.
x820 64g 6g
---------- Post added at 04:23 PM ---------- Previous post was at 04:22 PM ----------
Akashsundar said:
Have any one flash this ROM
If there is any bugs reply here I will prepare fix for it
Click to expand...
Click to collapse
I do have problem (see the post right above). Any Ideas?
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!)
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
HI, i hv the same problem likes yours with split screen.
Possible to share the steps how you manage to solved it.
Update:
Hi, I just managed to resolved it.
Download the given recovery 19S and save it on a USB drive.
Run twrp and press button wipe as our screen is reversed.
Then look for the file at external drive USB.
Just install it and once it is done..... the screen will return to normal
deltasata said:
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
Click to expand...
Click to collapse
Hi.
Yes. After "QFIL", i also didn't update my device from DEV ROM with any Stock ROM (Indian or Chinese versions) by "upgrade.zip" without get the "corrupted file" error. So by TWRP, i installed 16S Indian Stock ROM -- TWRP informed that i have "no OS installed" but i proceeded and restarted from TRWP. It initialized the new ROM, and after the first setup, i restarted the device to complete any system operations after the first boot, and i updated the device with the Indian 19S with the EUI updater ( tapped "upgrade.zip" file). The device now have the stock recovery and boot in english (not chinese), and the EUI in all languages available on "India 19S Stock ROM".
Stock ROMS:
Le Max 2 All Official Stock Firmware links
Best regards.
NextGear said:
Hi.
Yes. After "QFIL", i also didn't update my device from DEV ROM with any Stock ROM (Indian or Chinese versions) by "upgrade.zip" without get the "corrupted file" error. So by TWRP, i installed 16S Indian Stock ROM -- TWRP informed that i have "no OS installed" but i proceeded and restarted from TRWP. It initialized the new ROM, and after the first setup, i restarted the device to complete any system operations after the first boot, and i updated the device with the Indian 19S with the EUI updater ( tapped "upgrade.zip" file). The device now have the stock recovery and boot in english (not chinese), and the EUI in all languages available on "India 19S Stock ROM".
Stock ROMS:
Le Max 2 All Official Stock Firmware links
Best regards.
Click to expand...
Click to collapse
Hey bro, I have the same problem. What twrp you used? When I try to install 16s indian twrp gives an error "Patching system image..." for too much long time, so it stop to install it.
Hello,i tried to root my phone.after flashing twrp if I try to reboot the system it just shows asus logo for like 15 seconds and then switch off.i can't switch on my phone.i can go to twrp recovery mode but that's that.
Plz help.
Indransu said:
Hello,i tried to root my phone.after flashing twrp if I try to reboot the system it just shows asus logo for like 15 seconds and then switch off.i can't switch on my phone.i can go to twrp recovery mode but that's that.
Plz help.
Click to expand...
Click to collapse
Hey, I faced the same issue 2days ago and yup I found a solution...
So, the first step you will need to follow is to flash the stock recovery via fastboot and then download the stock firmware zip file from Asus site and copy the zip file to SD Card. Now go to the recovery and then select "Apply update from Sdcard" and select the zip file and let the process complete .
In my case it took about 20-25 minutes so don't get tensed regarding the time...
facing same prblm..cant i use any custom rom?
Rishabh.Kashyap said:
Hey, I faced the same issue 2days ago and yup I found a solution...
So, the first step you will need to follow is to flash the stock recovery via fastboot and then download the stock firmware zip file from Asus site and copy the zip file to SD Card. Now go to the recovery and then select "Apply update from Sdcard" and select the zip file and let the process complete .
In my case it took about 20-25 minutes so don't get tensed regarding the time...
Click to expand...
Click to collapse
im using asus zenfone max 2016 sd 615.i hv successfully flash twrp nd i hv taken the stock back up.bt whenever i tried to flash a custom rom it shows error 7.thn i edited the script thn i flashed the rom..this time it successfully flashed but i treid to rebbot to system it shows asus logo thn get swtich off.pls help if u knw anything
Kaustav365 said:
im using asus zenfone max 2016 sd 615.i hv successfully flash twrp nd i hv taken the stock back up.bt whenever i tried to flash a custom rom it shows error 7.thn i edited the script thn i flashed the rom..this time it successfully flashed but i treid to rebbot to system it shows asus logo thn get swtich off.pls help if u knw anything
Click to expand...
Click to collapse
Yeah I have also faced this issue and the only way to get your device working again is by flashing your stock ROM again either via Asus flash tool or via your stock recovery.
To flash using Asus flash tool...
Download the stock recovery file and flash it.
To flash with recovery...
Find and download stock recovery and flash it to your device via ADB
And then download the zip file for your device for your device from Asus official site and put it on your SD card.
And then select apply update from SD card and let the process complete...
For more help join my WhatsApp group...
https://chat.whatsapp.com/85ioy72WO3kHqeaWqxFXfZ
So i can not use any other rom except the stock rom?
Though i took backup of the stock rom befor wipe out data.. So i recover it..
Btw thnx bro
After done flash twrp img file through adb on asusu z010d by pressing vol up and power key i cant go to twrp . My screen goes of the exact time twrp open. What should i do? Still i can use my phone by rebooting. But cant reach twrp. Any solution?
Hi guys,
Easy way to flash TWRP from computer for Mi 8 SE.
Download suitable file from below.
Twrp 3.2.3-1227 Compatible with Android 9 (Beta v8.12.27 and upper versions)
https://www.mediafire.com/file/qtdm3qlivcn4gmw/MI8_SE_TWRP_Yukleme_Araci_81227.zip/file
Twrp 3.2.3-1102 Compatible with Android 8.1 (Lower versions than Beta v8.12.27)
https://www.mediafire.com/file/bsvuaxcg1vghayz/MI8SE_TWRP_Yukleme_Araci.zip/file
1. Your phone bootloader should be unlocked.
2. Make sure USB drivers are installed to PC.
3. Turn on USB Debugging. Settings - More - Developer Options - Usb debugging
4. Press Volume down + power button and reboot to fastboot mode.
5. Connect your USB cable to PC
6. Unzip downloaded package and run twrp-yukleme.bat file.
7. Press enter to continue. When it's done enter to exit program.
8-For steady TWRP install Magisk16.4 when you boot into TWRP.
Thanks to by.Trabzonlu from miuiturkiye
downloaded multiple times
unpacking gives a bug
I tried both links
olinen said:
downloaded multiple times
unpacking gives a bug
I tried both links
Click to expand...
Click to collapse
Thanks for your report.
Links and zips are updated. It should unzip fine now :good:
it's ok, just that I had to run the program first and only after that I joined the mobile in the fastboot. Otherwise, he made a mistake
Thx :good:
9
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me
Alimataei said:
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me
Click to expand...
Click to collapse
TWRP 3.2.3 12-17 works for android 9 ?
TacoNikky said:
TWRP 3.2.3 12-17 works for android 9 ?
Click to expand...
Click to collapse
1102 also works for Pie.
I try to install this recovery but nothing happens at all I have installed the rom miui.eu 10.2.2.0 apparently this rom mr deleted the recovery that had already installed before installing this rom:crying:
Have someone trying treble gsi rom? How to proper install? Thanks in advance.
TWRP-3.3.0-0423 whit magisk 19.0 root For Xiaomi mi8 SE
Download Link:
https://mega.nz/#!CrhTmKgY!PE7lXdLtCzPqYO55ulCx2faFLVqPi6mpXXaYOnbbB8s
Could it be possible that this TWRP will work on mi 9 se, too?
Sent from my [device_name] using XDA-Developers Legacy app
putti71 said:
Could it be possible that this TWRP will work on mi 9 se, too?
Click to expand...
Click to collapse
This is mi8se forum!! TWRP is specific for each phone (different kernel, processor...) so there's no way you could install this TWRP img on another phone than Sirius
Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?
Hi! Is there an updated twrp for miui 11 android 10. First time to install this.
greendra8 said:
Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?
Click to expand...
Click to collapse
Same as mine. How's your device now?
---------- Post added at 08:16 AM ---------- Previous post was at 08:13 AM ----------
Hi guys. Im getting the error after flashing twrp. At first it works. I will flash rom so i reset it and wipe al data. But it didn't boot into recovery mode. It stays at fastboot. I just dl this installer from somewhere here in xda so i didint know thatmagisk should be flashed afterward. Pls help. I . getting error authentication failed
Trojan00 said:
Same as mine. How's your device now?
Click to expand...
Click to collapse
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.
greendra8 said:
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.
Click to expand...
Click to collapse
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?
Trojan00 said:
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?
Click to expand...
Click to collapse
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.
greendra8 said:
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.
Click to expand...
Click to collapse
Bro i downloaded the stock fastboot firmware. But in mi flash it says can not found file flash_all.bat