Related
Hello,
I´ve got some big problem wth my P8.
I rooted and flashed TWRP some days ago.
Yesterday and I wanted to install an update, OTA isn´t workng with root and TWRP, so I extracted the B170 update for my GRA-L09 with HuaweiExtractor and flashed the built zip, but now my P8 keeps on getting bootloops at huawei-startscreen.
Every try to restore an TWRP-backup ands up with the same sh*t and installing the update from dload on the SD with booting per volume up + down also ends with an error.
When I connect the phone in TWRP to an PC it also didn´t recognize the size of internal memory at all.. it only says internal memory.. for the SD it keeps saying me it has around 59GB..
and TWRP only says the internal memory is around 4GB, but it has to be around 11GB belive
I think something destroyed the internal partitions on my phone.
Is there a way to flash an update.app direct from pc or to restore faulty partitions?
Hope someone couldhelp me, the phne is only 3weeks old
try the three bottoms way update
but the dload file is formated sd card and shut down the phone and use the volume down and up and power at the same time and it will install the update.app but you must have stock recovery
raider2k9 said:
Hello,
I´ve got some big problem wth my P8.
I rooted and flashed TWRP some days ago.
Yesterday and I wanted to install an update, OTA isn´t workng with root and TWRP, so I extracted the B170 update for my GRA-L09 with HuaweiExtractor and flashed the built zip, but now my P8 keeps on getting bootloops at huawei-startscreen.
Every try to restore an TWRP-backup ands up with the same sh*t and installing the update from dload on the SD with booting per volume up + down also ends with an error.
When I connect the phone in TWRP to an PC it also didn´t recognize the size of internal memory at all.. it only says internal memory.. for the SD it keeps saying me it has around 59GB..
and TWRP only says the internal memory is around 4GB, but it has to be around 11GB belive
I think something destroyed the internal partitions on my phone.
Is there a way to flash an update.app direct from pc or to restore faulty partitions?
Hope someone couldhelp me, the phne is only 3weeks old
Click to expand...
Click to collapse
Can you still enter TWRP? Have you tried doing a Factory Reset?
I try one more time with dload on formated sd and three buttons.. we will see
and yes, I can enter twrp and can flash all sort of img´s in fastboot and switch between twrp and stock recovery.. but installing an full rom isn´t working.. factory reset and so on were done countless times..
Edit: now it´s getting worse.. twrp is still working, BUT after last attempt with 3-button-method I can´t touch anything, only power-button is working, no unlock or so on
is there some possibility to flash the phone with SPFlashTool to recreate partitions?
is it possible to get this repaired at a huawei-center? i´ve only unlocked bootloader and flashed twrp, but did not install root.. should relock bootloader be enough?
raider2k9 said:
I try one more time with dload on formated sd and three buttons.. we will see
and yes, I can enter twrp and can flash all sort of img´s in fastboot and switch between twrp and stock recovery.. but installing an full rom isn´t working.. factory reset and so on were done countless times..
Edit: now it´s getting worse.. twrp is still working, BUT after last attempt with 3-button-method I can´t touch anything, only power-button is working, no unlock or so on
Click to expand...
Click to collapse
Try to "factory reset" in TWRP and then install the stock recovery via fastboot again. I had the same problem like you before, but this fixed it. If it doesn't we could speak on Skype, if you want too.
R0flC0pt3r said:
Try to "factory reset" in TWRP and then install the stock recovery via fastboot again. I had the same problem like you before, but this fixed it. If it doesn't we could speak on Skype, if you want too.
Click to expand...
Click to collapse
This isn´t possible at all anymore.. fastboot always ends up saying "FAILED (data transfer failure (unknown error))"
Seems my phone phone now is not only bricked, after all these trys it is really bricked
raider2k9 said:
This isn´t possible at all anymore.. fastboot always ends up saying "FAILED (data transfer failure (unknown error))"
Seems my phone phone now is not only bricked, after all these trys it is really bricked
Click to expand...
Click to collapse
Don't you have any insurance, return policy or so?
Also, did you started fastboot via "CMD" with elevated rights ( Admin ) ?
R0flC0pt3r said:
Don't you have any insurance, return policy or so?
Also, did you started fastboot via "CMD" with elevated rights ( Admin ) ?
Click to expand...
Click to collapse
I have insurance.. but will they repair it, after all I have tried?!?
fastboot is working for example "fastboot devices" or so on.. only flashing ends up giving errors
So now my P8 was repaired because of damaged mainboard..
the situation now is, I have a full twrp-backup of my old device, but of course with the old IMEI.. now with a new mainboard it also has a new IMEI..
so can I restre my old backup, when keeping the EFS with the new IMEI or wont this work, because the backup was made with another IMEI?
can somebody tell me, if this is going to work?
hi
i same problem way ?
Try to flash this custom rom via recovery "do full wipe" , when your device work, then you can go back to stock rom via updater app. Or you can stay in this custom rom If you like it.
Here is the link for the custom rom :
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
Hi Guys
Is there posibility to flash stock rom via TWRP ?
thnx
for me the only way was to send it for a repair and get the mainboard exchanged.. flash via TWRP should work, if you have a rom in zip-format.. the huawei-roms itself aren´t compatible!
raider2k9 said:
for me the only way was to send it for a repair and get the mainboard exchanged.. flash via TWRP should work, if you have a rom in zip-format.. the huawei-roms itself aren´t compatible!
Click to expand...
Click to collapse
but twrp supports flashing .zip and .img too there is toggle button.. I have flashed B170 bootloader.img and stock recovery ,.. and phone is even more bricked..
There is no TWRP anymore and goes straight to Rescue Mode.. but I can still boot to fastboot but it says phone unlocked but in reality phone is not unlocked because when I tried to flash recovery via fastboot flash recovery recovery.img it threw at me ''not allowed ??? so why phone says unlocked then ??
how much did u have to pay for motherboard ?
XDADEVX said:
but twrp supports flashing .zip and .img too there is toggle button.. I have flashed B170 bootloader.img and stock recovery ,.. and phone is even more bricked..
There is no TWRP anymore and goes straight to Rescue Mode.. but I can still boot to fastboot but it says phone unlocked but in reality phone is not unlocked because when I tried to flash recovery via fastboot flash recovery recovery.img it threw at me ''not allowed ??? so why phone says unlocked then ??
how much did u have to pay for motherboard ?
Click to expand...
Click to collapse
you even seem to have bricked your flash-memory.. it´s something I got with my O8.. but it got repaired under warranty, because of faulty flash / mainboard.. so luckely I got a brandnew mb with new IMEI
raider2k9 said:
you even seem to have bricked your flash-memory.. it´s something I got with my O8.. but it got repaired under warranty, because of faulty flash / mainboard.. so luckely I got a brandnew mb with new IMEI
Click to expand...
Click to collapse
how much did u pay ?
as I said.. it got repaired under warranty, so I had nothing to pay
raider2k9 said:
as I said.. it got repaired under warranty, so I had nothing to pay
Click to expand...
Click to collapse
even if u messed it up ? they didn't tell you that u modified phone ? what did u tell them ? are you in UK ? I just sent it to huawei today mornning
raider2k9 said:
as I said.. it got repaired under warranty, so I had nothing to pay
Click to expand...
Click to collapse
how long did u have to wait ? when they sent it back to you ?
Hello,
I own a Huawei P8 L09, bootloader unlocked, rooted and with TWRP recovery.
I tried this morning to flash a new rom using TWRP recovery.
Problem is that I do believe I wiped to many partitions and I ended up with a bootloop.
I could at first access 3 times the emui erecovery (btw, Wifi recovery failed) but not anymore (is it related to the battery level ? I don't know how much I still have)
Following a lot of threads here and on some other forums (I've been searching now for approx. 7 hours...) :
I downloaded a update stock ROM (B170 something), I extracted Boot, System, Recovery and Cust
I entered bootloader mode (it's the only mode I can go to; recovery No, Download mode neither)
and on my computer I typed in the cmd "fastboot flash recovery recovery.img" same with system, cust and boot.
All of them said "Okay" but the bootloop is still there and I can't acess any other mode or shut the device off.
Also, my bootloader indicate that i'm "unlocked" but when I try to do something as :
"fastboot erase cache" it says "remote: not allowed" or something like that.
I tried the SD card flash method but I can't even acess the 3-button mode (doesn't work - bootloop again).
Finally, I've got 2 questions :
1) Is there a solution ? Is there/was there anybody in the same situation ?
2) Does the battery level influence wether I may or not enter any mode ? like b.e. under 30% I can't access recovery or something like that ?
Thanks in advance for your help and sorry for my bad english.
Greetings from Belgium !
Jules
Hi!
I have the same situation as you do, All i know is that you can access the eRecovery only if you're plugged in.
But it's completely useless. Have you found any solutions yet?
Edit:
i struggled and i'm still struggling but i figured out that I need the recovery and boot img of the version i was on previously. In my case that is B350.
The main mirror is down but i managed to find another one: https://mega.nz/#!NAcgQY7Y!I4eRfkaq62J31csv_wZ8_nTzmUbWPX71JUicDysjus8
after flashing them i was able to partially flash (using vol+-&pwr) B170 (it only went up to 90% with my USB attached, fails without USB)
At my surprise it booted B170 even if it didn't complete, however right now it keeps rebooting every minute. I'll update if i manage to fix this
I have the same problem as you both. To flash boot.img and other files by fastboot we need to unlock bootloader. To unlock bootloader we need to have Imei, Product Id and SN, but I can't read it because phone won't turn on.
Anyone know how to get this info?
you can read these info from the packaging box!
I managed to fix my issues (i believe) by continuously flashing and flashing versions. I never really managed to fully OTA update to 100% due to some "CUST error" but from B350 i managed to "update" to B170, then to B200, then to B321a.
Now i just installed TWRP and rooted it and on the process of installing xposed (if possible).
I wasted a good 6-7 hours on everything already
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
TukAliveFra said:
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
Click to expand...
Click to collapse
you gonna pay for the repair..
Hello everyone, I have a huawei p8 vodafone it branded.
I decided to root it, unblocked the bootloader and everything was good so far...
I tried to flash a custom recovery but failed for some reason and I decided to stick with stock recovery.
Now I installed an app as system app and my phone got bricked. my fault..
At first It went trough a bootloop and I was not able to access the huawei recovery or the fastboot, after a while it started to boot into a error message where it was saying that it was impossible to read user data partition, and give me some choices like backup, update to the latest version, or data factory.. I choose data factory twice but it went trough a bootloop again only to give me back to the same page after a while.
I can access huawei erecovery but it gives me getting info package failed when it says that I have to update it with wifi.
I can access fastboot mode and it says me that the phone is unlocked.
I really don't know what to do as I'm not expert, I tried to read various topics but never saw anyone with this message where it was saying impossible to read user data partition..
I had emui 3.1 5.1.1 with vodafone it brand... In case I have to flash it which firmware I should look for? Or is there a way to get my phone alive again without flashing?
http://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704
silvano2 said:
http://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704
Click to expand...
Click to collapse
Hey thank you silvano, can you tell me which firmware I need to flash it? Is it okay if I use a b170 even if I had the 5.1.1 emui 3.1 version?
Nothing, I can't seem to make it work, I've flashed the boot.img recovery.img system.img and cust.img successfully(b170) but still stuck in bootloop, I can enter bootloader mode, and recovery.. but when I enter recovery it says me that I need to update it and I can't update it because it says me that getting info package failed... tried with different wifis, same result..... The excatly same thing happens with the b132 stock rom too and I cant factory reset or even wipe cache if I dont make this update first as is the only option avaible on huawei eRecovery.
As last attemp I tried to force an upgrade with putting UPDATE.APP inside the sdcard and press vol up vol down and power for booting but this combination of buttons doesnt work...
I'm hopeless, I really don't know what to do... any help would be much appreciated
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990
http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you
However, if you are watching this, it means ur phone is bricked with huawei p10 lite/p10/p10 plus
Read the replies and follow the instruction noted by @Blackball and his links.
Then you will find you self a way to restore the phone.
Thanks again to @Blackball and rest of you guys, much appreciated for your help.
What on earth is Yoroot?
So, You can't enter fastboot mode am i right ?
Do you connect usb cable to your devices before press Vol- and Power button ?
Current Situation
After the battery was dead, i actually can enter the fastboot and i used TWRP 3.1.1 for huawei P10 Plus from github. double wiped my device and by far i have entered the system normally.
However, the ROM wasn't official and i lost my warranty for unlock my huawei phone. And the custom service from Huawei said that they don't provide any official ROM Since it's Android 7.0 .
This ROM is really crappy that i can't delete/uninstall any Application i installed.(It gets reboot everytime i try to and the Application is still there even i just tried to Delete/Uninstall).
Worst of all, some options does not work properly in "Option" menu . (For example i can't access to "Developer mode" that everytime i press it it tabbed back to the former menu.)
I really hate this crappy menu so i tried to search on the internet for P10 Plus ROM so far i get B133 update ROM i can find and i tried to install it from SDcard by pressing VOL - and VOL + and Power buttom.
It says failed to update system at 5% while updating/recoverying the system.
and the ROM which i'm using was found in HUAWEI's official fan forum from Club.Huawei.com a forum belongs in china.(Rooted rom B140).
Right now seems the only option for me is to find a better ROM than this .(At least won't get me so many bugs like this one .:crying: )
and Thanks for your comment "Bigbearxl" it worked as normally it should after the battery was dead then i recharged it.
Yet Right now the PC doesn't recognize the device though Via-Usb because it's not Huawei official ROM and Hisuite helper only recognize their own ROM and the rest Phone helper or ADB can't recognize the device while The Phone is Booting normal .
And Reply to "Craphead" Yoroot is a special Root tool for Huawei P10/P10 plus made by chinese from Huawei Fan Club forum.
New Update
After rewrited boot.img though fastboot mode from https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946 thanks to "yury_z, " i can start to delete files with current system, but it's still crappy that it doesn't even have camera
So i think i will try dload method to recovery my phone with firware that i found in forum.
Failed
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
This work for P10plus too
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
WackyJoker said:
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
Click to expand...
Click to collapse
Maybe you could also try installing stock firmware with funkyhuawei, it's not for free though. But dload method never works on P10/plus unfortunately.
thanks @Blackball and @Craphead. i checked both of your method but didn't work and this new twrp 3.1.0 i downloaded displayed sd card 0mb. and i followed poster's step and missing one file.
However i might found a useful Thead that might work and i'm gonna try tonight.
http://www.stechguide.com/huawei-p10-plus-b133-nougat-update/
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
@Blackball not sure you what you mean by that, do you mean that you can actually use it to install firmware on p10/p10 plus now? If so how did they manage to get around the authentication issue?
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well i tried your method but there were some file that can't be downloaded from that post so i used another and,eventhough with complete files, the method i posted and i was going to use it tonight. Failed.
did all the steps from update.bat indicated and all worked fine till the last step that it says " automaticly install system" and the phone shows error at recovery.(similar to dload method because it automaticly create dload and exact those ROM files)
it indicates a big red " ! " sign and stopped. basicly i'm back to "No System Status"
The only method wowrks for my "P10 Plus" is " flash system system.img " method.
yet i don't know how to exact system.img boot.img recovery.img etc from those stock firmware like those chinese.
i have some of their rewrote roms (it's crappy because i has no default camera and it's for chinese P10 Plus A.K.A VKY_L29) .
Yet i can't find any System.img on google by far.
Blackball said:
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Click to expand...
Click to collapse
I haven't tried your Firmware Finder method , i think i can install crappy system.img then try your Firmware Finder method.
Because right now i wiped my system and i'm without system :crying:
Guys This Thead https://forum.xda-developers.com/showthread.php?t=2315547
tells you how extract flashable rom files from firmware update.app.
It should work but i only made to Unknownfile XX .img and i can't download his script "HuaweiFinder" from his google drive.
Holy Crap it worked, i Extracted system.img and other img from update.app by some Chinese scripted unpack script. and I'm trying to restore my device though fastboot mode with adb.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well just tried your method and at last step it says installing failed. then i reboot entered rec mode choose wipe/factory reset
wiped till 50% and stopped, it can't factory reset.
Before this method fastboot mode was " Phone unlock " " Bootloader unlock."
Now it's just "Phone unlock"
now i'm stuck at boot loop "your device is booting now" then it rebooted and back to "your device is booting now" again then automaticly goes to Erecovery mode. I have to shutdown device for now and hope i can find some solution tomorrow :S
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Blackball said:
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Click to expand...
Click to collapse
i did this method yesterday and, well, i can't get update_full_VKY-L09_hw_eu.zip from the link : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v85029/f1/full/filelist.xml . only Update.zip and Update_full_data.zip . the other one "update_full_VKY-L09_hw_eu.zip" i had to get it from another webside (it's also b133)
it shows a big "!" sign at the last step . i did everything it tells and tried both sdcard&script way to flash twice both rebrand&same brand update.
after the failure i can't enter "Vol +" and "Vol -" and "Power button" to do dload method . When i try to do that it just goes in Recovery mode.
In recovery mode i tried to wipe data/factory reset. It stopps at 50% which is after wipe and starting to factory reset at 50% it failed.
i try to flash in system.img and boot.img yet i still can not enter the system and stuck at bootloop.