Related
After I got my axon 7 it was on android 6 mm. I unlocked the bootloader, then installed twrp. With twrp I tried to flash a bootstack and a nougat. It didn't boot so I flashed stock recovery from twrp and installed official nougat update from there. Now when the phone opens there is that screen says "lock bootloader again, wait 5 seconds phone will boot". Everything is fine and phone really boots but when I try to install twrp again it gets stuck on that screen and doesn't boot in 5 seconds.
So right now:
I have unlocked bootloader and stock recovery
And I am looking for a way to install twrp and nougat rom
Thanks in advance :good::good:
ahalak said:
After I got my axon 7 it was on android 6 mm. I unlocked the bootloader, then installed twrp. With twrp I tried to flash a bootstack and a nougat. It didn't boot so I flashed stock recovery from twrp and installed official nougat update from there. Now when the phone opens there is that screen says "lock bootloader again, wait 5 seconds phone will boot". Everything is fine and phone really boots but when I try to install twrp again it gets stuck on that screen and doesn't boot in 5 seconds.
So right now:
I have unlocked bootloader and stock recovery
And I am looking for a way to install twrp and nougat rom
Thanks in advance :good::good:
Click to expand...
Click to collapse
Install TWRP, right after you install it boot to TWRP, format data (check that it formats with ext4) and install Magisk or SuperSU. Your problem may be dm-verity, and magisk or supersu patch the kernel to fix this.
What is weird is that usually if you install TWRP and just boot to system, the system should boot normally, but it should replace TWRP with the stock recovery... This doesn't happen, right?
Choose an username... said:
Install TWRP, right after you install it boot to TWRP, format data (check that it formats with ext4) and install Magisk or SuperSU. Your problem may be dm-verity, and magisk or supersu patch the kernel to fix this.
What is weird is that usually if you install TWRP and just boot to system, the system should boot normally, but it should replace TWRP with the stock recovery... This doesn't happen, right?
Click to expand...
Click to collapse
So much thx. It worked this time.
For your question; twrp was still there after I tried to boot into system.
ahalak said:
So much thx. It worked this time.
For your question; twrp was still there after I tried to boot into system.
Click to expand...
Click to collapse
Because it didn't actually boot, it failed to boot. But it should have booted afaik
Whatever, it works now
Choose an username... said:
Install TWRP, right after you install it boot to TWRP, format data (check that it formats with ext4) and install Magisk or SuperSU. Your problem may be dm-verity, and magisk or supersu patch the kernel to fix this.
What is weird is that usually if you install TWRP and just boot to system, the system should boot normally, but it should replace TWRP with the stock recovery... This doesn't happen, right?
Click to expand...
Click to collapse
Thanks bruh..just got this phone yesterday and just when I think it's all come together this happens..but all resolved thanks to you.:good:
Hi, I have a essential phone running Oreo 8.1, just recently I have rooted the phone with magisk v16 an twrp 3.2.1, I successfully flashed it with twrp but after the flash whenever I want to get into twrp it just freezes up on the mount data screen and I have to force reboot it, does anyone know a solution to this problem
Make sure you're following the exact steps from this post. Every step is crucial (except #3, because you have to disable your screen lock before booting twrp.
You shouldn't have to manually mount anything in TWRP either. The magisk installer might give you an error about mounting system but it doesn't seem to make any difference.
[QRCODE][/QRCODE]
yellk20 said:
Hi, I have a essential phone running Oreo 8.1, just recently I have rooted the phone with magisk v16 an twrp 3.2.1, I successfully flashed it with twrp but after the flash whenever I want to get into twrp it just freezes up on the mount data screen and I have to force reboot it, does anyone know a solution to this problem
Click to expand...
Click to collapse
You cannot have TWRP installed with 8.x.
TWRP is not compatible.
You must flash the original boot image, then install magisk.
TWRP cannot remain.
You will boot loop.
Please read the instructions on rooting carefully.
Ok thank you
Why can't TWRP replace recovery instead of boot?
RawSlugs said:
Why can't TWRP replace recovery instead of boot?
Click to expand...
Click to collapse
No one has created a bit image with TWRP as the recovery.
Sent from my PH-1 using XDA Labs
RawSlugs said:
Why can't TWRP replace recovery instead of boot?
Click to expand...
Click to collapse
Because the partition layout of the Essential does not have a recovery partition.
Recovery is contained in the boot image.
So to have TWRP resident/permanent, the boot image must be patched.
It has been done for 7.x, but sense 8.x is still beta, there is no official TWRP for Oreo.
Once Oreo is final, I expect we will get a TWRP that works.
The current limitation, means you can't flash without a computer handy.
UPDATE - Did not manage to find a way to get TWRP installed permanently but did manage to install Lineage OS 16 (which was my end goal) via hotboot of their recovery IMG, so happy with that at least! Appreciate any help given!
Not sure what I am doing wrong. have never come across this before!
I just completely reset my phone to stock via MiFlash
I then boot into TWRP recovery from Fastboot
I then install the TWRP installer in TWRP
I then reboot to recovery but get 'The System has been Destroyed'
I can still boot into the stock ROM
I can still boot into Fastboot
I just can't seem to get TWRP to install, I can only access it in hotboot
Any help would be amazing!
It's a known issue with Stock Pie and permanent TWRP.
A solution is to install magisk before booting to system
Tepig said:
It's a known issue with Stock Pie and permanent TWRP.
A solution is to install magisk before booting to system
Click to expand...
Click to collapse
Oh well damn, I will give that a shot thank you!
Tepig said:
It's a known issue with Stock Pie and permanent TWRP.
A solution is to install magisk before booting to system
Click to expand...
Click to collapse
Unfortunately did not do the trick for me
I installed TWRP then magisk, then rebooted to system
I then rebooted back to recovery but still get 'The system has been destroyed' message
MoonCakeHug said:
Unfortunately did not do the trick for me
I installed TWRP then magisk, then rebooted to system
I then rebooted back to recovery but still get 'The system has been destroyed' message
Click to expand...
Click to collapse
Never install twrp on stock pie. You'll get the same message. Hotboot it only.
MoonCakeHug said:
Unfortunately did not do the trick for me
I installed TWRP then magisk, then rebooted to system
I then rebooted back to recovery but still get 'The system has been destroyed' message
Click to expand...
Click to collapse
From what I have tried it seems that it is a bug with stock pie, custom roms with pie and stock oreo don't have this problem.
Anyway, you can basically get the same functionality by hotbooting but it's less convenient.
I have TWRP installed and resurrection remix. Maybe their TWRP works for you, just check the instructions and give it a try.
I think you should install TWRP in both slot A and B for it to work.
MoonCakeHug said:
Unfortunately did not do the trick for me
I installed TWRP then magisk, then rebooted to system
I then rebooted back to recovery but still get 'The system has been destroyed' message
Click to expand...
Click to collapse
Weird, it used to work for me when I was on stock pie.
I'm on a custom rom right now so I cannot test if it still works.
Sorry
I also have the same problem but now I'm on a custom rom and the TWRP without magisk works, but I would like to try an sGSI, on a custom rom does the procedure work?
Try another twrp
I'm here also had the same problem on mi A2 lite
But Rom run smooth and stable for a long time that I even forgot I have no twrp. Instead I backed up with titanium bk just in case. So ,Hotbooted with adb.... less convinient but u get to where u wanna flash though
Hey guys,
I just oem unlocked my new 6T and have access to the bootloader. As I try to install TWRP with
HTML:
fastboot boot imagename.img
my computer says that it pushes the image just fine, but my phone restarts and then never makes it past the fastboot splash screen instead of loading up TWRP.
I was following the fajita (6T) instructions from the lineage OS website.
The first time I did it it worked, but following the instructions on installing lineage and telling me to wipe and format data, both the recovery seems to be gone and i cannot fastboot boot into TWRP.
Can you help?
Seems the same with what i experienced. Have you tried installing a fastboot rom? I had my oneplus 6t bootlooped into fastboot mode even if i try to turn it off, it just boots back automatically to fastboot mode. Last resort was to flash a fastboot rom. That worked for me.
thalesian2020 said:
Hey guys,
I just oem unlocked my new 6T and have access to the bootloader. As I try to install TWRP with
HTML:
fastboot boot imagename.img
my computer says that it pushes the image just fine, but my phone restarts and then never makes it past the fastboot splash screen instead of loading up TWRP.
I was following the fajita (6T) instructions from the lineage OS website.
The first time I did it it worked, but following the instructions on installing lineage and telling me to wipe and format data, both the recovery seems to be gone and i cannot fastboot boot into TWRP.
Can you help?
Click to expand...
Click to collapse
What TWRP version are you trying to install?
jp0469 said:
What TWRP version are you trying to install?
Click to expand...
Click to collapse
I tried 3.3.1.1. and 3.2.3.0.
What you are describing, I'm going to assume you are trying to install Lineage 17. You can't install TWRP if you are going Android 10, at least that's the conclusion I've come to at this point in time. It will fail to boot or end up in crash dump mode every time you try and enter recovery if you are on a custom ROM. If you are on Android 9, it's not an issue. I believe it's OK stock as well, but I don't know haven't tried, haven't been stock in a long time.
For LOS 17, only boot the TWRP image, never boot to recovery, never run the TWRP installer. You will likely still have to format data.
I have a post here, from when I had a similar issue. (instructions)
You'll notice the OmniRom instructions don't mention installing TWRP, only booting it.
Once I was in your spot, I always went back to stock using the fastboot ROM, installed TWRP, updated (still using TWRP), then started over with my install.
Well no, i was actually trying to install Lineage 16, which is Android 9 I believe.
The problem for me is that I do not get to the point where TWRP opens after "fastboot boot"ing it. So I understand, I should use a fastboot stock ROM? Is there such a thing? Where would I find it? Or would it be an OnePlus Oxygen ROM that I can fastboot?
Quickest way to start over:
To get back straight your gonna need to access a Windows PC, and run the MSM tool. Make sure you install both OnePlus and Qualcomm drivers. ( Don't wait for Windows, just pre install the drivers) here are some links. Not my work. Please be sure to thank the developers for creating and hosting these tools ?
MSM Tool:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
OnePlus Drivers:
https://androidfilehost.com/?fid=11410963190603879743
Qualcomm drivers:
https://androidfilehost.com/?fid=11410963190603879743
thalesian2020 said:
Well no, i was actually trying to install Lineage 16, which is Android 9 I believe.
The problem for me is that I do not get to the point where TWRP opens after "fastboot boot"ing it. So I understand, I should use a fastboot stock ROM? Is there such a thing? Where would I find it? Or would it be an OnePlus Oxygen ROM that I can fastboot?
Click to expand...
Click to collapse
Were you on Android 10 before (OOS)? That will do that. LOS 16 is Android 9 and should have no problems installing TWRP or booting to it.. For LOS 16 I'd go back to 9.0.17, then install LOS 6T.
I posted these LOS install instructions a long time ago for another user.
Remember the MSM Tool will relock your bootloader so if something goes wrong the MSM Tool is your only choice. That is why it is always the last thing I resort to.
Thread to get Fastboot stock Roms if you want to try that route first.
Hey guys,
thank you so much for all your help. I've managed to use mauronofrios workaround here on xda to put my phone in a 9.0.17 state again (no idea what i had originally), and this way i could fastboot the twrp image again. so that worked fine, but so far flashing lineage hasnt worked, for whatever reason it seems to boot into a lineageos kind of recovery only (which i didnt even know existed).
So i guess in terms of this thread the problem is solved. Thank you again!
thalesian2020 said:
Hey guys,
thank you so much for all your help. I've managed to use mauronofrios workaround here on xda to put my phone in a 9.0.17 state again (no idea what i had originally), and this way i could fastboot the twrp image again. so that worked fine, but so far flashing lineage hasnt worked, for whatever reason it seems to boot into a lineageos kind of recovery only (which i didnt even know existed).
So i guess in terms of this thread the problem is solved. Thank you again!
Click to expand...
Click to collapse
Did you see my Lineage install instructions above? LOS installs its on Recovery when you flash the ROM. When om Android 9, boot TWRP, flash the TWRP installer, reboot to Recovery, install LOS 16, flash the TWRP installer again (replaces the LOS recovery that was installed), reboot to Recovery, install gapps / magisk if desired, reboot.
Read my instructions post though, the first time install is different, as you need LOS on both slots. Updating is different as well, its much easier.
It should go smoothly.
OhioYJ said:
Did you see my Lineage install instructions above? LOS installs its on Recovery when you flash the ROM. When om Android 9, boot TWRP, flash the TWRP installer, reboot to Recovery, install LOS 16, flash the TWRP installer again (replaces the LOS recovery that was installed), reboot to Recovery, install gapps / magisk if desired, reboot.
Read my instructions post though, the first time install is different, as you need LOS on both slots. Updating is different as well, its much easier.
It should go smoothly.
Click to expand...
Click to collapse
Do I need to be on Android 9 Stock when I start that process? What I did was boot into TWRP, flash TWRP installer, reboot into recovery, then format and wipe ALL partitions (except USB), then reboot into recovery again and then flash LOS, flash TWRP, reboot into recovery, flash LOS, flash TWRP, reboot system. Still no luck...
thalesian2020 said:
Do I need to be on Android 9 Stock when I start that process? What I did was boot into TWRP, flash TWRP installer, reboot into recovery, then format and wipe ALL partitions (except USB), then reboot into recovery again and then flash LOS, flash TWRP, reboot into recovery, flash LOS, flash TWRP, reboot system. Still no luck...
Click to expand...
Click to collapse
Wiping, Dalvik / ART, System, and Vendor is generally a bad idea. You can do them in certain situations, this isn't one of those situations you should be wiping those though. Factory reset, means the slider on the main page of the wipe screen that says swipe to factory reset, format data is the button that says format data. Don't do anything extra. If you did, yeah I would go back to 9.0.17 using the fastboot rom again, that will put everything back on both slots.
like OhioYJ stated, don't use advanced wipe. re-run the msm tool. Then follow his instuctions. You shouldn't need to preform any manual data wiping. The process of flashing will do everything required. looks like you're almost there
Thanks guys. I will try it out and let you know.
Edit: So I finally managed to properly install LOS - OhioYJ, your instructions worked! I installed 9.0.17 and went from there without wiping any additional partitions.
One questions remains: in your instructions you mention that after installing LOS once, you can update LOS as normal and you mention doing it via the recovery with flashing TWRP or GAPPS later again. Is it possible to do the update via the normal update function of LOS as well? Or will that overwrite TWRP?
You guys are awesome. Thank you so much for your help!
I seem to be stuck on the fastboot screen as well. Being on a MAC, anytime i try to do something in fastboot it goes straight back to the fastboot screen. I Thought I was on Android 10.0 trying to install recovery for that lead to bootloop of fastboot, tried using the Pie recovery and same thing. I am open to suggestions.
Thanks.
OhioYJ said:
What you are describing, I'm going to assume you are trying to install Lineage 17. You can't install TWRP if you are going Android 10, at least that's the conclusion I've come to at this point in time. It will fail to boot or end up in crash dump mode every time you try and enter recovery if you are on a custom ROM. If you are on Android 9, it's not an issue. I believe it's OK stock as well, but I don't know haven't tried, haven't been stock in a long time.
For LOS 17, only boot the TWRP image, never boot to recovery, never run the TWRP installer. You will likely still have to format data.
I have a post here, from when I had a similar issue. (instructions)
You'll notice the OmniRom instructions don't mention installing TWRP, only booting it.
Once I was in your spot, I always went back to stock using the fastboot ROM, installed TWRP, updated (still using TWRP), then started over with my install.
Click to expand...
Click to collapse
Twrp is working fine with Android 10, using mauronofrio version and magisk 20.2
callumbr1 said:
Twrp is working fine with Android 10, using mauronofrio version and magisk 20.2
Click to expand...
Click to collapse
Yeah it starting to seem like it maybe isolated to Lineage. You cant install TWRP with LOS 17. Someone else mentioned in the Omni thread that it worked. This thread is about Lineage, but that should be clarified, or clearer.
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP
Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine
houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:
Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.
ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.
zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system
frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself
I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...