Smartwatch y1 Firmware need!! - Other SmartWatches

Hello.
I Need Firmware to my y1 watch.
model : y1
chip: mt 6261DA
ROM: 32MB
RAM:64MB
Battery 380MaH.
Please help me

QuBlee said:
Hello.
I Need Firmware to my y1 watch.
model : y1
chip: mt 6261DA
ROM: 32MB
RAM:64MB
Battery 380MaH.
Please help me
Click to expand...
Click to collapse
Hi QuBlee, im new here and have backup of my Y1 + camera smartwatch firmware. your smartwatch specification very similar than my watch. please check this
http: //linku .us/x1EP
http: //linku .us/9ZezddrEQ
http: //linku .us/hXns
pass: apong
extract with 7zip extractor
https: //aponkz .wordpress .com/2018/11/18/firmware-dz11-plus-y1s-camera-smartwatch/

Related

U8 watch White screen Please Firmware our Backup soft

Welcome
I bought a watch SmartWatch u8 in the old soft
I decided to download the new version: M28_Firmware_FN1-2.V008
flash watch is white are sounds, but no response
after it turned out that it is a clone also looking firmware or
copy the firmware
info about the watch that I could find
MT 6260DA Meditek ARM chip.
Please help
my clock White screen...
I could not find the new version...
Where?
czester677 said:
Welcome
I bought a watch SmartWatch u8 in the old soft
I decided to download the new version: M28_Firmware_FN1-2.V008
flash watch is white are sounds, but no response
after it turned out that it is a clone also looking firmware or
copy the firmware
info about the watch that I could find
MT 6260DA Meditek ARM chip.
Please help
Click to expand...
Click to collapse
where did you buy this clone? tks

Rwatch M26, m28 firmware

Hello.
I searched at this forum about how to flash firmware at the rwatch m26 but i couldn't find it.
I found only zip files of the firmware but didn't find how to flash it.
Please if you have instructions about how to flash and what to do from the beginning i will be happier
I also know that i need drivers for this watch so please i need your help.
Thank you very much!
Please someone..?
I really need your help
Yes help me also.
Yes help me too.
My Watch M26 have just one style - and I can not show the Danish date: 16.06.2016
It will just show: 2016.06.16
Please help me. YouTupe shows this Watch with many style in setting. Where can I find this ?
Look here!
f t p : / / 2 1 1 . 1 4 4 . 1 9 6 . 2 5 1
User: SMARTWATCH
Password: SMARTWATCH
Fcorn43 said:
Look here!
f t p : / / 2 1 1 . 1 4 4 . 1 9 6 . 2 5 1
User: SMARTWATCH
Password: SMARTWATCH
Click to expand...
Click to collapse
Hi,
sorry, but that IP for FTP is not longer available.
Another idea?
Thanks

U8 smartwatch mt6261da

hello fellow, someone has the rom to the smartwatch u8 mt6261da?
Can post it?
Thanks
nf1974 said:
hello fellow, someone has the rom to the smartwatch u8 mt6261da?
Can post it?
Thanks
Click to expand...
Click to collapse
Here you go, just watch the video first (.mp4) if chimes for boot and shutdown are the same it might work:
(just add https: to this because i cannot share links, Im noob right now xD) //drive.google.com/open?id=13GGeJcYcP7niyUP1i3IfwXbzg4_5RAQ0G

Q18 smart watch language(KOREAN) porting

Hi dear.
I bought Q18 smart watch a few days ago.
But that was not supported KOREAN. there is no language entrise.
So I found many other roms, to import in my device.....dz09, gt08, a1 etc.
But I failed. they have touch,color problems.
Finally I decied to make custom rom.
I used MTK LANGPACK EDITOR, MTK LANGUAGE TOOL. ..................failed again.
So I request that Please know how to port Korean language in my firmware. Or Could you make that firmware?
Please help me. I think My device is clone. It have 32M rom, 32M ram
I atteched my firmware, readback rom and result of the Q18 memory scan.
Thanks a lot.
drive.google.com/drive/folders/1pi-qBTbmeo0JrtknKqAVZ98zAWk1s96m?usp=sharing
++++++++++++++++
firmware ver
LD991F7_V7.0_XZKJ3_KP_Q18_LX7789_9305_LX9307_Z1_A_V1.9.3
BRANCH
11CW1352MP
MTK61D_BTDIALER_11C
BUILD TIME
2018/10/29 16:04
hwany said:
Hi dear.
I bought Q18 smart watch a few days ago.
But that was not supported KOREAN. there is no language entrise.
So I found many other roms, to import in my device.....dz09, gt08, a1 etc.
But I failed. they have touch,color problems.
Finally I decied to make custom rom.
I used MTK LANGPACK EDITOR, MTK LANGUAGE TOOL. ..................failed again.
So I request that Please know how to port Korean language in my firmware. Or Could you make that firmware?
Please help me. I think My device is clone. It have 32M rom, 32M ram
I atteched my firmware, readback rom and result of the Q18 memory scan.
Thanks a lot.
drive.google.com/drive/folders/1pi-qBTbmeo0JrtknKqAVZ98zAWk1s96m?usp=sharing
++++++++++++++++
firmware ver
LD991F7_V7.0_XZKJ3_KP_Q18_LX7789_9305_LX9307_Z1_A_V1.9.3
BRANCH
11CW1352MP
MTK61D_BTDIALER_11C
BUILD TIME
2018/10/29 16:04
Click to expand...
Click to collapse
Here comes Q18 firmware with korean language
https://drive.google.com/open?id=1ocUZlASu8TJWR2VThRyThgblq1d_L_83
be sure to have a backup of original firmware in case the changed firmware is not working!!!!!!
Thanks oxatools
Thanks your reply.
All functions are working. But Korean language is not working.
All fonts are broken (like □□□ □□ □□□). I think that the firmware is not merged appropriate fonts to support KOREAN.
I'm tring to solve this problem, using "romdz09.jar". ... but it's too hard.
Any way. Once again, I sincerely thank you.
I
Sorry for that but you are right if firmware is not suppprting font charset it is not working i had the same problem with chinese language
Maybe i in Future my editor will support font changing but its hard in MTK firmwares to change fonts
Hi

DZ09 MTK6260DA and MTK6261DA 32/32 firmware

Hej, please helpmy found firmware.
I lost my firmware in my smartwatch
I have 3 devices:
DZ09 MTK6260DA 32/32 - Clone not working
DZ09 MTK6261DA 32/32 - Clone not working
DZ09 MTK6260A 128/64
If someone has archives my clones firmware please share me files .
Sory my english is not perfect.
I from Poland ]:->
Ahh I almost forgot, message for admins:
I register bad username, my correct username is "Darek86Btow" if it's possible chenge.
darkek86btow said:
DZ09 MTK6260DA 32/32 - Clone not working
Click to expand...
Click to collapse
I think this well help

Categories

Resources