Related
Hi Guys!
I got a classic Samsung Galaxy S i9000 and i used to mess with the roms and Kernel, however ... I've recently upgraded to Samsung Galaxy SIII and i decided to be a good brother and pass my old i9000 to my sister ... However, before i can , i need to fix this !
Is there a way to make the i9000 completely stock again? at this point the CWM is still installed even after factory resetting the device..
It's been quite a long time since i messed with it and i dont trust my own knowledge anymore so i figured i'd post a message.
If there is a quickfix for the Wifi, that will do too :highfive:
Thanks guys !
- Patrick
patr-iick said:
Is there a way to make the i9000 completely stock again? at this point the CWM is still installed even after factory resetting the device..
Click to expand...
Click to collapse
yes, just use a downgrade Rom or rescue kit from My Android Collections and or a solution from My Android Solutions
Hi friends, this is Ajith from India,,,, i have been using my friend's defy for past 1 month,,
he gave me his phone with cm7 custom rom,,, and when i was about to give him the phone back, he asked me to put the stock rom on it, then i tried putting a custom rom on it via RSD lite,, everything was working when before i flashed that rom,,,
in RSD lite everything finished completely and i removed it and restarted,,,
but what i got is the bootloader error A5,70,39,00,27
i don't know what to do now,,, i tried many other roms too but it shows no changes,,.
my boot loader version is 9.10
Friends please help me to unbrick ma phone as soon as possible,,,,
if u guys have any rom for ma mobile then please let me know,,
this is my mail id [email protected]...
I have the same issue with my defy+ telstra branded i couldnt root and ended up in boot error like you and cant boot the phone
Then i re flashed astock rom for australia but retailer version i managed to get the phone on and boot normally but im stuck on emergencey mode and cant make calls:crying:
Great
Force F said:
I have the same issue with my defy+ telstra branded i couldnt root and ended up in boot error like you and cant boot the phone
Then i re flashed astock rom for australia but retailer version i managed to get the phone on and boot normally but im stuck on emergencey mode and cant make calls:crying:
Click to expand...
Click to collapse
ok dude,,, thats fine,,,, pls help me,,, just send me the link of the rom tat u jst installed.... i can help u once my fone gets booted normally,,,, now i need is tat my fone has to boot inside normally,,, tell me the procedure tat u have done in ur phone and also plz send me the link of the rom tat u have installed in it...:good:
ajithkumarann said:
Hi friends, this is Ajith from India,,,, i have been using my friend's defy for past 1 month,,
he gave me his phone with cm7 custom rom,,, and when i was about to give him the phone back, he asked me to put the stock rom on it, then i tried putting a custom rom on it via RSD lite,, everything was working when before i flashed that rom,,,
in RSD lite everything finished completely and i removed it and restarted,,,
but what i got is the bootloader error A5,70,39,00,27
i don't know what to do now,,, i tried many other roms too but it shows no changes,,.
my boot loader version is 9.10
Friends please help me to unbrick ma phone as soon as possible,,,,
if u guys have any rom for ma mobile then please let me know,,
this is my mail id [email protected]...
Click to expand...
Click to collapse
Ajit,
A few questions
Is it a Defy or a Defy plus?
What is the name of the SBF that you flashed via RSD lite.
9.10 is not the boot loader version.I am assuming you are probably on BL7 (boot loader)and the SBF that you are trying to flash is a lower boot loader version . This happened to me when i flashed a Defy plus SBF on my Defy and then tried to downgrade just to find out that there was no returning back (as of today).
Here are the steps that i followed to get my phone working and i sincerely hope this may help you as well :
1) If you are on Defy plus (MB526) you can try flashing the rom mentioned in this post http://forum.xda-developers.com/showthread.php?t=1595013. It will also help you to get a rooted device.
The above step should get you a working phone ,however if your device is a Defy (as you mentioned in the OP) you will end up having a non functional camera and experience battery drains.
In order to rectify this you can download this awesome rom from Quarx from the following URL http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ (CM10-20121018-NIGHTLY-mb526.zip is the one that you should be downloading)and apply then the V3 update.
Your phone should now be running an awesome Jelly Bean based rom with everything working perfectly (well almost its still a Nightly Build)
The steps mentioned above is what got me a working phone and there could be other ways as well . This is a wonderful forum and i am sure that experts will help you in getting your problem resolved.:good:
@ForceF change your baseband via the baseband switcher app
Sent from my MB526 using xda premium
@southpaw said:
Ajit,
A few questions
Is it a Defy or a Defy plus?
What is the name of the SBF that you flashed via RSD lite.
9.10 is not the boot loader version.I am assuming you are probably on BL7 (boot loader)and the SBF that you are trying to flash is a lower boot loader version . This happened to me when i flashed a Defy plus SBF on my Defy and then tried to downgrade just to find out that there was no returning back (as of today).
Here are the steps that i followed to get my phone working and i sincerely hope this may help you as well :
1) If you are on Defy plus (MB526) you can try flashing the rom mentioned in this post http://forum.xda-developers.com/showthread.php?t=1595013. It will also help you to get a rooted device.
The above step should get you a working phone ,however if your device is a Defy (as you mentioned in the OP) you will end up having a non functional camera and experience battery drains.
In order to rectify this you can download this awesome rom from Quarx from the following URL http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ (CM10-20121018-NIGHTLY-mb526.zip is the one that you should be downloading)and apply then the V3 update.
Your phone should now be running an awesome Jelly Bean based rom with everything working perfectly (well almost its still a Nightly Build)
The steps mentioned above is what got me a working phone and there could be other ways as well . This is a wonderful forum and i am sure that experts will help you in getting your problem resolved.:good:
Click to expand...
Click to collapse
Dude...
--- its defy MB525
---JRDNEM_U3_2.51.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTINT_P029_A018_HWp3_Service1FF
since Motorola is new to me am not able to understand anything.. but i tried as to ma best .... if it was sony or samsung or htc then i can do anything in them,,,
And i can understand what u r saying,, but the problem is that am not able to get into the recovery mode to flash the custom rom via CWM,,,, is it possible to flash the rom via RSD lite which u said ?
I just get a white led when i connect my phone to the pc...
"
ajithkumarann said:
Dude...
--- its defy MB525
---JRDNEM_U3_2.51.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTINT_P029_A018_HWp3_Service1FF
since Motorola is new to me am not able to understand anything.. but i tried as to ma best .... if it was sony or samsung or htc then i can do anything in them,,,
And i can understand what u r saying,, but the problem is that am not able to get into the recovery mode to flash the custom rom via CWM,,,, is it possible to flash the rom via RSD lite which u said ?
I just get a white led when i connect my phone to the pc...
Click to expand...
Click to collapse
I understand that at this point you are stuck at bootloader error message that you have mentioned in the title of this post. Connect your device to a PC and flash the SBF(stock defy rom) that you can download from the link below using RSD . Once RSD lite shows the status as "Finished" , you should then be able to boot normally. Hope this helps.
http://sbf.droid-developers.org/umt...YOSTARH_P010_A011_M002_HWp3_Service1FF.sbf.gz
Hello I have a s4 i9505 phone and my problem is that sometimes (most of the times) doesn't seem to recognize the sim (it is inside) . Last night i installed the goldfinger ROM and it went good, i had no signal but the people could call me. This morning i tried to get rid of the signal problem too but i flashed the XXUGNE5 modem and now i don't have sim at all . My carrier is Vodafone , Spain. I tried everything , since this problem persist like a month ago when i changed my screen because it crashed. I changed too the hardware, the sim reader but no solution at all so my thoughts are that this is a software problem . Sorry 4 my bad English and thanks in advance for your help.
Edit: Sometimes i have no signal but the phone works , but after a certain time it says Sim card extracted , restart...
1. Do a full wipe in your custom recovery
2. Flash the latest stock rom.
3. If the problem is still there then it's a hardware problem.
Lennyz1988 said:
1. Do a full wipe in your custom recovery
2. Flash the latest stock rom.
3. If the problem is still there then it's a hardware problem.
Click to expand...
Click to collapse
Thanks for your answer bud, but where can I download this stock rom? I9505XXUGNH7_I9505VFRGNH5_ATL . It's fot the i9505 s4 with vodafone carrier from spain. Thank you very much
I installed it ( latest stock firmware) but the problem persists. When It says that the sum was extracted I restart it shake it a little and then it works. Any idea why? I really appreciate your help.
gtenixx said:
Thanks for your answer bud, but where can I download this stock rom? I9505XXUGNH7_I9505VFRGNH5_ATL . It's fot the i9505 s4 with vodafone carrier from spain. Thank you very much
Click to expand...
Click to collapse
From here.
Good Luck
tomtro74 said:
From here
Good Luck
Click to expand...
Click to collapse
Thank you I downloaded it like 15 min ago ( it took like 2 hours ) and flashed it. Until now no problem . I hope it stays like that. Thank you for your support . Any trouble I encounter i will post it , hopefully my solution help someone . What i did was erase it all and flash the last firmware for my carrier. Now restoring all data . Again a BIG THANKS!
Hello all :good: I am Back with an awesome guide
This is the most required guide for every Meizu Device user
This is for those who have hardbricked or bootlooped (with locked bootloader) And missing recovery. In there device while trying anything (including roms etc) :crying:
This guide is not like i am giving you flash tools to flash your phone Because in our case it is not possible with SP Flash tools (Due To Locked Bootloader) :crying:
In this guide I will inform you how you can get your bricked device back Not free you have to pay for it
Requirements :good:
1)Meizu M2/Mini{Meilan2} (those are different names of our device in different countries)
2)Some Money According to indian Currency its max 250rs or 300rs max (well some guys can ask you for more its your luck)
3)Firmware to flash your phone (See Down For Links)
4)Little Brain
Lets Start
Download Meizu M2/Mini Flash Frimware From Here :fingers-crossed:
Links are not valid anymore
You have to find a Mobile repairer Guy Who uses tools Like MRT Dongle,UFI Android Toolbox,Chiness Phone Flash Tools.Etc
In Short Tools That Can Bypass Meizu Security (Lock On Bootloader) There are Plenty of Tools that can do same
Just go to shop ask them to fix your phone if they say you need to change hardware tell them to try with those toolbox of android it will bypass security lock of Meizu and will flash the phone
It will be costly to buy them Sinle MRT Dongle Cost (3000 rs or more or less) so it is easy to repair them from professionals just explain them what is the problem and they will fix it (Most of meizu Custtomer Care Center loots the people by Chaning EMMC (Mother Board) of there phone Unless there is no need to do that
Sharing Personal Experience :good:
Even I had bricked my phone once i went to service centre (I Was Noob that time) they flashed my phone (with official tools and files) and in just 5 minutes my phone came back to alive :victory:
Every service centre guy is not same mostly in Indonesia i had seen many post regarding this issue they just change EMMC and charge big amount of it (nearly half of the phone cost) phone cost 6999rs price of changing EMMC 3000rs :crying:
This Guide Is Applicable for All Meizu Devices Find a device specific frimware or PM me i will help you to find a flash file for you which will fix your problem :good:
Note:A Guy Named Nguyễn Th
where is the guide?
maXDAmn said:
where is the guide?
Click to expand...
Click to collapse
up ?
gialaivn said:
prices: 10$-15$
work via teamviewer
email: [email protected]
fb.com/thanhdatPD
Click to expand...
Click to collapse
:3 lol 15×64=960rs
i still say my guide is better option ? can be done under 400,500 why waste more :v
gialaivn said:
:3
I begin work.
If more people, prices will decrease.
It is still a better solution than replacing emmc
:laugh::laugh::laugh:
Click to expand...
Click to collapse
looks like that you own that tools right?
wew *__*
:3 wew kul *___*
gialaivn said:
Mrt dongle ???
Click to expand...
Click to collapse
i still think that will not work :| because physical hardware is not present :v
I have the same problem... Can you fix it?
I confirm!
The man is a magician (or a professional ).
My device was in Hard Brick and Nguyễn Thành Đạt managed to save it.
I think he deserves to be paid for the work he did. The price he charges is relatively cheap in comparison to others.
Just one more thing:
Before I had a Hard Brick, my system version was: Flyme *.*.*.*G (Global).
Nguyễn Thành Đạt installed me the version: Flyme 5.1.7.0Y (Chinese).
So now I need to Unlock Bootloader & Install Twrp And Flash the Global version.
Let him know what system version you want - Maybe he could install it for you.
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
ChakibDEV said:
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
Click to expand...
Click to collapse
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Happy you solved your problem. I flashed flyme using both TWRP and stock recovery and the bootloader's still unlocked.
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
same here what to do?
i need firmware but download link is not working please help me
my device is bricked i need sp tool firmware please help
lyfhckr said:
my device is bricked i need sp tool firmware please help
Click to expand...
Click to collapse
You can't get it here dude.
Dwnld it from here.
http://www.softpedia.com/dyn-postdownload.php/6b986d7c8ddf22446036468c5cb3fa6c/5a0181bf/39687/0/1
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Hey man, just wanna ask how did you flash this temp_unlock_secro.img.. And where did you get it??
Pretty good!
Hi all , I'm having no network problem in my Poco m3. I'm using custom rom . While using my phone it suddenly stopped showing network . I reset the phone but it didn't worked . Even I flashed the stock rom and custom rom but nothing changed.
Plz help me..
Emom 99 said:
Hi all , I'm having no network problem in my Poco m3. I'm using custom rom . While using my phone it suddenly stopped showing network . I reset the phone but it didn't worked . Even I flashed the stock rom and custom rom but nothing changed.
Plz help me..
Click to expand...
Click to collapse
Use that tool
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
If possible, flash the same rom that was on the phone when you bought it.