Related
Hi everyone has anyone tried pugging anything into the usb port like an external hard drive, mouse or keyboard anyone have any luck with it?
interesting question
if i could find a female USB to male micro USB adapter, then i could try this out
anyone know if any where shells one of those?
It's an USB output, not input.
I assume. You would probably need some converter in between?
opica said:
It's an USB output, not input.
Click to expand...
Click to collapse
not quire... else how do you explain being able to charge
also being able to move files into the phone via USB?
also sync data
etc
etc
Exactly, usually you have a software on both ends, where the disk device doesn't necessarily has it.
PS
I'm just guessing
Got the idea a few days ago after looking at the full breakdown of the Xoom...
Here's the idea:
Remove the dock charge contact points, and install a micro switch in its place. With the switch in place, find the proper contact points for ground and the host-mode pin on the micro USB port. Solder some 30 AWG to the contact points on the board, then to the switch, and put everything back together.
This would give you the ability to use any USB cable as a host-mode cable, while only affecting charging on docking units. With the battery life of the Xoom, I don't see it as a deal breaker.
Thoughts?
Well, I only charge on the dock. Way to convenient not to have. I don't trust the standard chargers design to withstand me..
However if you are not a dock user, then it sounds like it would be cool.
Just my opinion, but it seems like a lot of risk and effort for not having to carry around a cable. I mean if you have the standard cable, you still need a male to male adapter to use any usb device. So either way you still need something else besides the standard USB cable. I would rather just have a USB host cable that already has the correct USB ends on it and still be able to use my charging dock.
Again just my opinion, YMMV.
HuckFinn said:
Just my opinion, but it seems like a lot of risk and effort for not having to carry around a cable. I mean if you have the standard cable, you still need a male to male adapter to use any usb device. So either way you still need something else besides the standard USB cable. I would rather just have a USB host cable that already has the correct USB ends on it and still be able to use my charging dock.
Again just my opinion, YMMV.
Click to expand...
Click to collapse
Well normally I'd agree with you, but it seems that most people are having issues getting good cables unless they buy the Motorola cable.
It's easier to find an adapter for the standard USB cable than it is to find an OTG cable as well.
Still just an idea, but I figured I'd see what everyone thought.
all you need is the Motorola Mini-USB to Micro-USB adapter, a USB extension cable and some scissors.
you'd to still carry around a Female-Female adapter for your USB cables with your idea, i'd rather not rip open my xoom and solder **** when the other option is easier.
Also, if you don't plan on upgrading to LTE, you could just wire up a USB port to the card slot for the LTE card, it should have USB routed to it.
LIV2 said:
Also, if you don't plan on upgrading to LTE, you could just wire up a USB port to the card slot for the LTE card, it should have USB routed to it.
Click to expand...
Click to collapse
This actually sounds like a better idea... Was thinking of how I could add in a full-size USB port to remove the extra cable completely. USB out the top would also allow me to hook up an external HDD and still sit the Xoom up in a cinema position.
The question with doing that though, is will it be recognized as a host-mode connection, and if not how would you get it to act as a host-mode connection without the 'fifth pin'?
Has anyone tried using OTG and SlimPort (HDMI/DP/VGA-Output) at the same time? Does it work?
yannik~ said:
Has anyone tried using OTG and SlimPort (HDMI/DP/VGA-Output) at the same time? Does it work?
Click to expand...
Click to collapse
I'm a little confused. Won't the Slimport cable and OTG cable need a seperate mini-USB connection? Unless there is an OTG cable that has some sort of Y-port I'm not aware of or there is a Slimport with similar Y-port I can't see how they could work at the same time with the LG. The connections just aren't... oh...
If you do get some converters of USB male on one end and mini-USB female on the other you could get them to connect but I have no idea if that would work since I don't know nearly enough about the electronics of these devices.
Good luck on your project.
xyltha said:
I'm a little confused. Won't the Slimport cable and OTG cable need a seperate mini-USB connection? Unless there is an OTG cable that has some sort of Y-port I'm not aware of or there is a Slimport with similar Y-port I can't see how they could work at the same time with the LG. The connections just aren't... oh...
If you do get some converters of USB male on one end and mini-USB female on the other you could get them to connect but I have no idea if that would work since I don't know nearly enough about the electronics of these devices.
Good luck on your project.
Click to expand...
Click to collapse
Slimport isnt a cable as much as an adapter. Slimport is like mhl adapter, has a mail microusb to plug into phone, then a female microusb out the side, and female HDMI out the end.... pretty standard fair ... but no op, haven't tried it...
The slimport I've seen online had the electronic guts section with a cable attached. I know what you mean in that it's a device that functions as an adapter, but there are at least some versions that have a flexible cable on the USB end of it.
Your point is made however.
So, OP (or anybody else) did slimport + usb-otg work for you?
Hi, what do you think about this -> http://www.ebay.co.uk/itm/For-LG-G3...448165?hash=item1a0294aea5:g:u~IAAOSw-vlVlj7V ?
Would love to know if anyone has solved this in the last four years. Will generic hdmi/usb to micro-usb work? Do MHL hdmi/usb hubs work at all? Is there anyway to get that Ebay item listed above that is long-since unlisted?
Hi all,
I've just ordered this gorgeous phone and am waiting for it to be delivered. In the meantime I've been wondering given that it's capable of HDMI output and serve as USB host whether it is possible of it doing both at the same time, if say I hooked up the HDMI output along with other usb devices, like a USB drive and a keyboard via a usb HUB. I would be practically creating a bespoke docking station of sorts..
I know it's pushing the technology a little... and there are other alternatives to USB devices (NAS drives, wireless mouse/keyboards...), but my question is more about what the device is capable of.
Thanks.
Update:
So far I've successfully managed to plug in an old USB hub via a cheap micro-usb to USB adapter bought off e-bay. From there I hooked up a USB keyboard, Mouse, pen drive and also USB speakers.
I'm amazed it actually managed to power all of these devices without any problems (imagine battery drain is massive given that the usb hub is unpowered).
I would like to know if anyone has tried hooking up HDMI output while the USB is hosting other devices. Has anyone tried this already? I've searched everywhere and can't seem to find a definitive answer to my question.
As a side note, does anyone know of a docking station for the G2, similar to what you get with laptops?
Did you figure out the answer to this?
AlexOB1 said:
Did you figure out the answer to this?
Click to expand...
Click to collapse
No, I have not yet tried this out. I had bought an HDMI cable/device thing but never got it to work on my TV.. apparently it had something to do with the technology that the phone uses for HDMI not being compatible with older Samsung TVs.
Would be great if anyone else has tried this out could post here, whatever the outcome
Hello,
I've tried to find a clear, straight answer online and while I have found info regarding the USB-C standard, I can't find an answer to my question.
I use a mirco usb plug to charge both my current mobile phone and my android tablet.
Does the smaller port in the OnePlus Two use the same sized micro-usb port for charging? I understand that the USB-C port is the larger port on the other end of the cable. Maybe I am wrong about that.
Right now I have several micro usb chargers that I use to charge my phone and my tablet, and I'd like to know if they will be able to charge a OnePlus Two. I don't mind if the charging is slower, but I'd just like to know if it will fit and charge.
Thanks!
No in my sense,as far as my knowlege goes, USB-Type C is altogether a different technology,so you will need a special adapter for OTG too..
Azharkanorwala said:
No in my sense,as far as my knowlege goes, USB-Type C is altogether a different technology,so you will need a special adapter for OTG too..
Click to expand...
Click to collapse
That's what I thought. Thanks!
Vincent Vegas said:
Hello,
I've tried to find a clear, straight answer online and while I have found info regarding the USB-C standard, I can't find an answer to my question.
I use a mirco usb plug to charge both my current mobile phone and my android tablet.
Does the smaller port in the OnePlus Two use the same sized micro-usb port for charging? I understand that the USB-C port is the larger port on the other end of the cable. Maybe I am wrong about that.
Right now I have several micro usb chargers that I use to charge my phone and my tablet, and I'd like to know if they will be able to charge a OnePlus Two. I don't mind if the charging is slower, but I'd just like to know if it will fit and charge.
Thanks!
Click to expand...
Click to collapse
No.....a big No....the port they are using is nothing more than a new plug on the phone side of the cord. The other end of the cable will plug into all your old USB ports. So you will need to use the OP2 cable but the end that does not plug into the phone will plug into any current USB port.
They did not include any of the good things that come with USB C, they just put the USB C plug in the phone and on one end of the cable.
bp328i said:
No.....a big No....the port they are using is nothing more than a new plug on the phone side of the cord. The other end of the cable will plug into all your old USB ports. So you will need to use the OP2 cable but the end that does not plug into the phone will plug into any current USB port.
They did not include any of the good things that come with USB C, they just put the USB C plug in the phone and on one end of the cable.
Click to expand...
Click to collapse
Thanks, friend. That's clear. This is a drag. Right now I have several charging cables that power all my stuff. Now if I get the OP2, I'll need two cables for home and two for the office. That's a negative in my book
Thanks!
Vincent Vegas said:
Thanks, friend. That's clear. This is a drag. Right now I have several charging cables that power all my stuff. Now if I get the OP2, I'll need two cables for home and two for the office. That's a negative in my book
Thanks!
Click to expand...
Click to collapse
Based on the release video they said an adapter would be available older USB cables so that might be an option for you.
Good to know. If the adapter is small and inexpensive, that would help a lot! Thanks!
Vincent Vegas said:
Good to know. If the adapter is small and inexpensive, that would help a lot! Thanks!
Click to expand...
Click to collapse
You can find them on eBay:
http://www.ebay.com.sg/itm/USB-3-1-...088?pt=LH_DefaultDomain_0&hash=item2354402058
MasK said:
You can find them on eBay:
http://www.ebay.com.sg/itm/USB-3-1-...088?pt=LH_DefaultDomain_0&hash=item2354402058
Click to expand...
Click to collapse
Thanks! Very simple and affordable!