Related
I was able to create a TWRP backup of the ota after I installed it on my Moto X XT1095. I was able to flash this using TWRP from kitkat.
After flashing this, you will have the new ota, however it will not have the new baseband (you will retain the original baseband from your previous installation, in other words this does not include the modem). I believe that you should be able to flash this to any one of the XT variants as long as you are able to flash a custom recovery (in this case TWRP, I used 2.8.1.0 if that matters)
I had to create new folders on the internal storage due to the fact that I was unable to create a backup of kitkat. All I did was create a new folder on the internal storage called TWRP, inside that folder I created a folder called BACKUPS within that folder I created a folder that has the unique alpha-numeric name to each device, and finally in that folder I placed this backup file. TWRP/BACKUPS/unique alpha-numeric name/2014-11-09--11-34-04 LXE22.39-5. Then I booted to my TWRP recovery performed a factory data reset along with wiping cache and dalvik, then performed the restore.
If you don't know what your unique alpha-numeric folder name is, you can find this by booting to twrp and try to perform a backup (this is how I found out what my folders name was). I got an error, within that error was the path (it is verbatim and case sensitive).
If anyone wants to try this, here is the link.
Unzip and place in the folder I described.
22.39-5 OTA
https://mega.co.nz/#!3QNmBJZD!6wRby9lwl2gWI0Lxtwq1sKZ7DGGYAs7vtP44GmZZwBQ
MD5-63a4a2eb969c1d37b543f17dec3a64e1
22.39-6 OTA
https://mega.co.nz/#!rdEVmKIR!9wt03nACOf_Gbwt1FzXwnmKkg9lcrCcQqBtlqBZMCTI
MD5-1288b96e0b90d02273ed4f2f4235273d
Let me know how it goes. I won't be able to offer much help other than what is provided here, if I have the time I will try. I hope I didn't make this to confusing. If it works for you, hit the "thanks".
Moderators, If this is not in the correct category please feel free to move it. Thanks
i appreciate you sharing this... question for u (or to make sure i understand how you tested the 5.0 Nandroid): after flashing the OTA, did you restore your 4.4.4 Nandroid (confirm it works: calls, data, etc.), factory reset and wipe and then restore your Lollipop 5.0 Nandroid (boot and confirm it works: calls, data, etc.)? thanks in advance for your reply.
cortez.i said:
i appreciate you sharing this... question for u (or to make sure i understand how you tested the 5.0 Nandroid): after flashing the OTA, did you restore your 4.4.4 Nandroid (confirm it works: calls, data, etc.), factory reset and wipe and then restore your Lollipop 5.0 Nandroid (boot and confirm it works: calls, data, etc.)? thanks in advance for your reply.
Click to expand...
Click to collapse
After the inital OTA, I wanted to see if I could get back to 4.4.4 stock unrooted. I accomplished this by running the tool created by bhp090808. After that, I unrooted through supersu, I flashed the att modem found on graffixnyc site. I then flashed "MotoX(2014)_stock_install-recovery_sh" (with twrp) that 0.0 provided in post number 124 from the "[OTA ZIP] Pure Edition Lollipop 5.0" thread. Finally I flashed stock recovery to achieve a stock 4.4.4 system. Everything worked. After I confirmed that everything worked I did the ota again just to see if it would flash. It did, from there I was able to flash twrp, but after you reboot from twrp on the new ota you lose the twrp recovery....there is a new feature in the latest twrp recovery that allows you to move a file from pc to phone internal storage, that is how I was able to create the nand.
Funny thing is, you cannot create a backup from twrp with 4.4.4 but you can from the new 5.0 ota.
Hope this answered your question.
BTW, this nand is of the 5.0 just to clarify, like I said I was unable to make a nand of the 4.4.4
That's funny. I can do a TWRP backup just fine in 4.4.4.
Did you advanced->fix pemissions in TWRP?
not working
rsa 329 said:
After the inital OTA, I wanted to see if I could get back to 4.4.4 stock unrooted. I accomplished this by running the tool created by bhp090808. After that, I unrooted through supersu, I flashed the att modem found on graffixnyc site. I then flashed "MotoX(2014)_stock_install-recovery_sh" (with twrp) that 0.0 provided in post number 124 from the "[OTA ZIP] Pure Edition Lollipop 5.0" thread. Finally I flashed stock recovery to achieve a stock 4.4.4 system. Everything worked. After I confirmed that everything worked I did the ota again just to see if it would flash. It did, from there I was able to flash twrp, but after you reboot from twrp on the new ota you lose the twrp recovery....there is a new feature in the latest twrp recovery that allows you to move a file from pc to phone internal storage, that is how I was able to create the nand.
Funny thing is, you cannot create a backup from twrp with 4.4.4 but you can from the new 5.0 ota.
Hope this answered your question.
BTW, this nand is of the 5.0 just to clarify, like I said I was unable to make a nand of the 4.4.4
Click to expand...
Click to collapse
I am having some issues with my phone so I tried to flash this.
When I attempt to copy this over MTP it tells me one of the files is too large for the system
Edit: got it ! Adb pushed it.
holtenc said:
That's funny. I can do a TWRP backup just fine in 4.4.4.
Did you advanced->fix pemissions in TWRP?
Click to expand...
Click to collapse
No, i did not. I will try that next time i downgrade. That would make things a lot easier for a person to put this in their backups.
Were you able to make a backup of your stock unrooted 4.4.4?
nineismine said:
I am having some issues with my phone so I tried to flash this.
When I attempt to copy this over MTP it tells me one of the files is too large for the system
Click to expand...
Click to collapse
follow along with the way i accomplished unrooting. i can confirm this works, I have done it several times now with consistent success.
BTW, this is not to be flashed, rather done through the "restore" feature of the twrp recovery. By placing this folder in the backups you will be able to access it through restore.
rsa 329 said:
No, i did not. I will try that next time i downgrade. That would make things a lot easier for a person to put this in their backups.
Were you able to make a backup of your stock unrooted 4.4.4?
Click to expand...
Click to collapse
I wish... I didn't even try. I rooted and then put on custom recovery.. didn't think things through very well I suppose.
holtenc said:
I wish... I didn't even try. I rooted and then put on custom recovery.. didn't think things through very well I suppose.
Click to expand...
Click to collapse
follow along with how I unrooted, it works!
You will be able to take the ota, modem and all. I'm just guessing you have the XT1095.
rsa 329 said:
I was able to create a TWRP backup of the ota after I installed it on my Moto X XT1095. I was able to flash this using TWRP from kitkat.
After flashing this, you will have the new ota, however it will not have the new baseband (you will retain the original baseband from your previous installation, in other words this does not include the modem). I believe that you should be able to flash this to any one of the XT variants as long as you are able to flash a custom recovery (in this case TWRP, I used 2.8.1.0 if that matters)
I had to create new folders on the internal storage due to the fact that I was unable to create a backup of kitkat. All I did was create a new folder on the internal storage called TWRP, inside that folder I created a folder called BACKUPS within that folder I created a folder that has the unique alpha-numeric name to each device, and finally in that folder I placed this backup file. TWRP/BACKUP/unique alpha-numeric name/2014-11-09--11-34-04 LXE22.39-5. Then I booted to my TWRP recovery performed a factory data reset along with wiping cache and dalvik, then performed the restore.
If you don't know what your unique alpha-numeric folder name is, you can find this by booting to twrp and try to perform a backup (this is how I found out what my folders name was). I got an error, within that error was the path (it is verbatim and case sensitive).
If anyone wants to try this, here is the link.
Unzip and place in the folder I described.
https://mega.co.nz/#!3QNmBJZD!6wRby9lwl2gWI0Lxtwq1sKZ7DGGYAs7vtP44GmZZwBQ
MD5-63a4a2eb969c1d37b543f17dec3a64e1
Let me know how it goes. I won't be able to offer much help other than what is provided here, if I have the time I will try. I hope I didn't make this to confusing. If it works for you, hit the "thanks".
Moderators, If this is not in the correct category please feel free to move it. Thanks
Click to expand...
Click to collapse
You're my MF'N hero! You have no idea how much BS I was having trying to flash that OTA:
Flash OTA? Nope, some BS about unexpected this and that in modem.
Flash modem? Nope, permission denied.
Restore from Custom Recovery?? YES. Thanks man. If i could spank your thanks button 100000 times i would.
holtenc said:
You're my MF'N hero! You have no idea how much BS I was having trying to flash that OTA:
Flash OTA? Nope, some BS about unexpected this and that in modem.
Flash modem? Nope, permission denied.
Restore from Custom Recovery?? YES. Thanks man. If i could spank your thanks button 100000 times i would.
Click to expand...
Click to collapse
LOL. This message brought a smile on my Monday morning face.
I can't copy the folder to my phone. It says it's too large. How can I do it?
Make room by deleting stuff? If that's not the problem then I don't know.
Maybe try pushing the folder with adb.
Did anyone try this on the XT1092?
Thanks in advance.
MY DEVICES: Moto x 2014 (XT1092), Nexus 7 2013 (razor), HTC Desire X (proto)
Unfortunately, I keep getting "invalid crc file for system.ext4.win000" when trying to copy the backup to the final destination folder. Been using Solid Explorer. I'll try another just in case.
Edit: ES File Manager worked. Also, for me, TWRP 2.8.1.0 will not backup, but 2.8.0.1 will. For what's it's worth.
holtenc said:
Make room by deleting stuff? If that's not the problem then I don't know.
Maybe try pushing the folder with adb.
Click to expand...
Click to collapse
There is plenty of space left on the SD card to copy this but it still says the file is too large. What command do I use on adb? Can you help me? Thank you.
---------- Post added at 11:14 AM ---------- Previous post was at 11:13 AM ----------
nineismine said:
I am having some issues with my phone so I tried to flash this.
When I attempt to copy this over MTP it tells me one of the files is too large for the system
Edit: got it ! Adb pushed it.
Click to expand...
Click to collapse
I am having the same problem, can you help me? What adb command do I use for this?
@MaKTaiL which model of the moto x do you have?
MY DEVICES: Moto x 2014 (XT1092), Nexus 7 2013 (razor), HTC Desire X (proto)
Vineet Upadhyaya said:
@MaKTaiL which model of the moto x do you have?
MY DEVICES: Moto x 2014 (XT1092), Nexus 7 2013 (razor), HTC Desire X (proto)
Click to expand...
Click to collapse
XT1097, but it doesn't really matter for the problem I'm having.
adb push <file> /storage/emulated/0/
Try that.
I have found it to be a problem with twrp try copying it to a different folder and then use twrp file explorer to move it to the backup folder. That worked for
I wonder whether there is help for someone who thought he knew how to flash a kernel but apparently is deluded. I have the original nexus seven Wi-Fi tablet android version 4.3 build number JWR66V. The system still wants to update me to 4.3 because I ripped some files out of the cache directory to prevent OTA updates. I have both fastboot and adb. I have read the stickies about flashing.
The phone is rooted and the bootloader is unlocked. I use TWRP custom recovery, and it's a good thing, because I solidly bricked myself up just trying to get my lollipop. I know there are tools to root a nexus seven even with stock lollipop, so I thought I'd upgrade my phone to stock lollipop and then use one of those methods. I tried both the stock lollipop kernel and the one provided by chain fire, which I understand is rooted already. (I'm assuming upgrading to lollipop will lose me my root, unless I want to recover back to 4.3.)
I tried to do these things a couple of different ways. When I tried fast boot, I got the message "error: neither -p product specified nor ANDROID_PRODUCT_OUT set". There was a YouTube video suggesting how to deal with this error message. I'm pretty sure I followed the instructions but no go. (I was using the "flash all" command.) This was after I had put the file containing lollipop in the directory, both zipped and unzipped (so that I had an .img file instead of a zip file). I tried using both the zip file with all of the lollipop partitions and the system image file individually. No go. I also had a message that android-info.txt could not be found, even though it was in the same, working directory.
I could be wrong but I don't think you can install a complete updated kernel from a file on the device. I think that works only with update.zip.
I'm still thinking fastboot is my best bet, but there are dependencies apparently and I don't know what files to include in its directory. Then, am I wise to go to stock and then root, or should I simply flash the stock kernel already rooted? I assume that's what chainfire is providing, correct?
I notice the lollipop official ROM nor Chainfire’s supposedly-rooted image have any file named nakasi. I have only .img files, no .zip files.
I found a dozen sets of instructions on how to flash a kernel but something I need is missing from all of them. Does anyone know what it is or can anyone offer some helpful advice?
Thank you,
Leon M.
Hi all, I posted this in the 6P bootloop thread, but didn't get a response. As that is a pretty LONG thread, i'm thinking my question may have gotten lost in the jumble.
Quick run down.
A few months back my 6P started the BLOD. I found the fix listed on these pages, applied it, and have been happily using my phone ever since. Phone is bone stock 7.1.2 other than the TWRP recovery and the modified EX kernel for 4 cores.
Since the fix, my phone FINALLY got the OTA update to go to Android 8.0 and i obviously want to get it done. My concern is HOW to do this without causing more headache.
Can anyone point me in the right direction? Should i use the OTA update or download the factory image from Google?
I've got some knowledge as i used to be into the "rooting" scene back in the day, but haven't for a while, so i feel a little lost.
Thanks for any help.
johnnyphive said:
Hi all, I posted this in the 6P bootloop thread, but didn't get a response. As that is a pretty LONG thread, i'm thinking my question may have gotten lost in the jumble.
Quick run down.
A few months back my 6P started the BLOD. I found the fix listed on these pages, applied it, and have been happily using my phone ever since. Phone is bone stock 7.1.2 other than the TWRP recovery and the modified EX kernel for 4 cores.
Since the fix, my phone FINALLY got the OTA update to go to Android 8.0 and i obviously want to get it done. My concern is HOW to do this without causing more headache.
Can anyone point me in the right direction? Should i use the OTA update or download the factory image from Google?
I've got some knowledge as i used to be into the "rooting" scene back in the day, but haven't for a while, so i feel a little lost.
Thanks for any help.
Click to expand...
Click to collapse
Well, for starters do NOT take the OTA. It will either fail or boot loop your phone. Due to the fact you have a modified boot.img you will need to update manually using fastboot with the full image. Re-apply the modified kernel after you finish updating the partitions, but BEFORE booting the first time. You can follow most guides on how to manually update a full image using fastboot, just add the step of flashing the modified kernel before booting.
Thanks for the reply and the help. If i could ask for a little more help, as this is my only phone.
Can you explain the difference between the modified boot.img and the modified kernel?
If i download the factory image from here (https://developers.google.com/android/images) is it ok to the get the latested one (Nov 2017) or do i need to get the original one (Sep 2017 as i'm on Fi)
Once i flash the factory image, is it going to replace the modified boot image as well as the modified kernel?
Follow the OP on this thread (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) in the downloads section there appear to be 2 files i would need, the "Boot.img from stock 6.17, 8.0 firmware" and "EX kernel version 5.03". Am i understanding that correctly?
Like i said, this is my only phone, and i'm probably just being overly paranoid about bricking it, but any clarification would be greatly appreciated.
johnnyphive said:
Thanks for the reply and the help. If i could ask for a little more help, as this is my only phone.
Can you explain the difference between the modified boot.img and the modified kernel?
If i download the factory image from here (https://developers.google.com/android/images) is it ok to the get the latested one (Nov 2017) or do i need to get the original one (Sep 2017 as i'm on Fi)
Once i flash the factory image, is it going to replace the modified boot image as well as the modified kernel?
Follow the OP on this thread (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) in the downloads section there appear to be 2 files i would need, the "Boot.img from stock 6.17, 8.0 firmware" and "EX kernel version 5.03". Am i understanding that correctly?
Like i said, this is my only phone, and i'm probably just being overly paranoid about bricking it, but any clarification would be greatly appreciated.
Click to expand...
Click to collapse
Use the latest November image. The boot.img contains the kernel and ramdisk, critical files necessary to load the device before the filesystem can be mounted. When you flash the new boot.img contained in the Google image, it will overwrite the patched kernel. You then need to re-patch it by installing EX kernel before booting. EX writes to (modifies) the stock boot.img. There are also pre-modifed boot.img files floating around. You will probably get more detailed help in the dedicated thread. Learning to flash manually (or remember how) is not really a big deal and a necessary skill for modding (and for getting yourself out of trouble). Good luck. :good:
v12xke said:
Use the latest November image. The boot.img contains the kernel and ramdisk, critical files necessary to load the device before the filesystem can be mounted. When you flash the new boot.img contained in the Google image, it will overwrite the patched kernel. You then need to re-patch it by installing EX kernel before booting. EX writes to (modifies) the stock boot.img. There are also pre-modifed boot.img files floating around. You will probably get more detailed help in the dedicated thread. Learning to flash manually (or remember how) is not really a big deal and a necessary skill for modding (and for getting yourself out of trouble). Good luck. :good:
Click to expand...
Click to collapse
Ok, so 1 last time (sorry)
1 - Downloaded the latest 8.0.0 factory image from google (this contains the bootloader, radio, and partitions (.zip).
2 - Get phone to fastboot and apply the above 3 new images
3- before rebooting, flash oreo4core (new, modified boot.img), TWRP recovery.img
4- reboot to recovery (TWRP) and apply the modified EX kernel
5 - reboot and (hopefully) profit
Am i missing anything, or doing anything that isn't needed?
johnnyphive said:
Ok, so 1 last time (sorry)
1 - Downloaded the latest 8.0.0 factory image from google (this contains the bootloader, radio, and partitions (.zip).
2 - Get phone to fastboot and apply the above 3 new images
3- before rebooting, flash oreo4core (new, modified boot.img), TWRP recovery.img
4- reboot to recovery (TWRP) and apply the modified EX kernel
5 - reboot and (hopefully) profit
Am i missing anything, or doing anything that isn't needed?
Click to expand...
Click to collapse
<<Disclaimer: I don't use the 4 core kernel, so I don't know if it comes with installer script or someone has just modified the latest boot.img>> Unzip the "partitions" zip you refer to and extract those image files to the same folder as bootloader and modem. For example, you can keep TWRP recovery if you don't flash the recovery.img. That is how you preserve your custom recovery. So in other words you'll now have a folder (your ADB folder?) with 5 image files.... bootloader, radio, boot, system, and vendor all in one folder. <<Note: it is my understanding you just substitute the latest oreo4core file (should be boot.img?) If this is true, copy that file into your ADB folder and let it overwrite the stock boot.img. Stop. Copy over flash-all.bat, change the *.bat extension to *.txt and open in notepad. You will see (and can copy/paste) the fastboot commands to get you started with bootloader and radio. Then flash the last 3 (boot, system, vendor). At this point you can reboot into the OS. Since you substituted the oreo4core boot.img file for the stock boot.img there is no need to use TWRP to flash anything. That and since you skipped flashing the recovery.img, TWRP is still there.
v12xke said:
<<Disclaimer: I don't use the 4 core kernel, so I don't know if it comes with installer script or someone has just modified the latest boot.img>> Unzip the "partitions" zip you refer to and extract those image files to the same folder as bootloader and modem. For example, you can keep TWRP recovery if you don't flash the recovery.img. That is how you preserve your custom recovery. So in other words you'll now have a folder (your ADB folder?) with 5 image files.... bootloader, radio, boot, system, and vendor all in one folder. <<Note: it is my understanding you just substitute the latest oreo4core file (should be boot.img?) If this is true, copy that file into your ADB folder and let it overwrite the stock boot.img. Stop. Copy over flash-all.bat, change the *.bat extension to *.txt and open in notepad. You will see (and can copy/paste) the fastboot commands to get you started with bootloader and radio. Then flash the last 3 (boot, system, vendor). At this point you can reboot into the OS. Since you substituted the oreo4core boot.img file for the stock boot.img there is no need to use TWRP to flash anything. That and since you skipped flashing the recovery.img, TWRP is still there.
Click to expand...
Click to collapse
Thank for the help! Everything seems to be up and running. I know you said you don't use the "4 cores" (can only assume your either on a different phone or yours isn't affected by the BLOD), but do you know if i still need to apply the EX kernel update, or know of a way to tell if it's already been applied?
Thanks again for all the help. I was pretty much in the right direction, but being as how i'd been away from it for a while, i wanted some backup
johnnyphive said:
Thank for the help! Everything seems to be up and running. I know you said you don't use the "4 cores" (can only assume your either on a different phone or yours isn't affected by the BLOD), but do you know if i still need to apply the EX kernel update, or know of a way to tell if it's already been applied? Thanks again for all the help. I was pretty much in the right direction, but being as how i'd been away from it for a while, i wanted some backup
Click to expand...
Click to collapse
I don't think you can flash EX kernel from now on. I think you have to use a modded boot.img that will contain his kernel/ramdisk. This is my guess. You really should be getting your information in the dedicated thread where everyone is actually installing and using it. Google "oreo 4 core" and you will find the XDA thread is the first hit. Good luck. :good:
Is it possible to root theG6 plus without Twrp, which would be my preferred method, but I cannot install TWRP on to my computer, no matter what I do, It just says can't mount file, Disk image is corrupted, This message comes up for all the versions. I have done all sorts of troubleshooting on this, but nothing has worked. I have Magisk installed on the SD card. Any help would be appreciated, BTW the bootloader is unlocked
Barb28n said:
Is it possible to root theG6 plus without Twrp, which would be my preferred method, but I cannot install TWRP on to my computer, no matter what I do, It just says can't mount file, Disk image is corrupted, This message comes up for all the versions. I have done all sorts of troubleshooting on this, but nothing has worked. I have Magisk installed on the SD card. Any help would be appreciated, BTW the bootloader is unlocked
Click to expand...
Click to collapse
Why did u try to mount a recovery.img in a WinOS?
Although it's an image file, it does not contain any file system suitable for a WinOS.
Install Magisk Manager (via .apk) to patch your boot.img with it. When the patched image is ready you can flash it via fastboot and your device is rooted.
WoKoschekk said:
Why did u try to mount a recovery.img in a WinOS?
Although it's an image file, it does not contain any file system suitable for a WinOS.
Install Magisk Manager (via .apk) to patch your boot.img with it. When the patched image is ready you can flash it via fastboot and your device is rooted.
Click to expand...
Click to collapse
I was following instructions that said to download twrp and put it in the fastboot folder, if I don't need to do that, it would be great. So Just installing magisk manager will be all I need to do ? Is APK different to the ADB folder, I don't want to get it wrong?
I know I have asked this before, but I am unable to install twrp to my fastboot folder,I have done all sorts of system repairs to my computer, but every twrp file I download says " cant mount file, disk image is corrupted" I know this can't be but I am at a loss now what to do. I have installed Magisk Manager on the phone, and the magisk zip file is on the sd card, Can anyone help me with this. pleeeeze!!
Barb28n said:
I know I have asked this before, but I am unable to install twrp to my fastboot folder,I have done all sorts of system repairs to my computer, but every twrp file I download says " cant mount file, disk image is corrupted" I know this can't be but I am at a loss now what to do. I have installed Magisk Manager on the phone, and the magisk zip file is on the sd card, Can anyone help me with this. pleeeeze!!
Click to expand...
Click to collapse
Here is your help:
https://forum.xda-developers.com/android/general/info-android-device-partitions-basic-t3586565
https://www.geeksforgeeks.org/android-boot-process/
https://www.androidauthority.com/root-android-277350/
https://wiki.lineageos.org/adb_fastboot_guide.html
https://www.androidcentral.com/10-basic-terminal-commands-you-should-know
###############################
Still got questions? Feel free to use the Google search
www.google.com
Thanks for your prompt reply, I have used google search, to try and find out why TWRP cant be mounted into the fastboot folder, it downloads ok,but will not mount, I have also lloked at all the links you stated, but none of them seem to address my problem. I am sorry if this has annoyed you, I will have to ask elsewhere for help. I have rooted phones before and never run into this trouble previously. Thanks for your time
Barb28n said:
Thanks for your prompt reply, I have used google search, to try and find out why TWRP cant be mounted into the fastboot folder, it downloads ok,but will not mount, I have also lloked at all the links you stated, but none of them seem to address my problem. I am sorry if this has annoyed you, I will have to ask elsewhere for help. I have rooted phones before and never run into this trouble previously. Thanks for your time
Click to expand...
Click to collapse
XXX.img = image (1:1 copy) of the whole partition, e.g. /boot, /recovery etc.
This is an image of a partition of your device. This is not a Windows partition, this is an Android partition. You must flash it to your device!! Have a look on twrp.me
Hi,
Lost root access after updating my OnePlus 6T to Android 11 a few days back, hence decided to flash magisk_patched image that I had created around 2 months back. Phone didn't like it ofcourse and gave me a QualComm Crash Dump error.
After searching, managed to boot into bootloader, however wondering how do I now boot my phone - I have downloaded and installed latest recovery (3.5.2_9.0-fajita.img) and am able to boot into recovery as well as bootloader/ fastboot.
Have also downloaded the zip file for Android 11 stable version - OnePlus6TOxygen_34.J.60_OTA_0600_all_2108052232_8c516d0cce8795.zip
Question - What do I need to flash this? adb commands don't seem to be working, only fastboot commands seem to. Can I just "push" this zip file in fastboot or is that only for img files?
Any help woud be massively appreciated!
The update to 11 does not agree with Magisk which causes it to either fail to complete the update or to die at early boot depending on how bad things were messed up. You can reapply root once the update to 11 is finished though, so you can still have root.
In your case manually upgrading to 11, letting it finish the upgrade, and then installing Magisk again is your best bet, in which case you would either have to find something that understands the update format or manually extract the updated partitions from the payload, iirc
Extracted boot.img and used fastboot command : fastboot boot boot.img, but this doesn't seem to have worked as well. Just thinking aloud what else can be done?
Edit - It now tries to boot, but then seems to go into OnePlus Recovery (from the chinese characters displayed along with an option to choose English language)
sam_htc_touch said:
Have also downloaded the zip file for Android 11 stable version - OnePlus6TOxygen_34.J.60_OTA_0600_all_2108052232_8c516d0cce8795.zip
Question - What do I need to flash this? adb commands don't seem to be working, only fastboot commands seem to. Can I just "push" this zip file in fastboot or is that only for img files?
Click to expand...
Click to collapse
Masamune3210 said:
The update to 11 does not agree with Magisk which causes it to either fail to complete the update or to die at early boot depending on how bad things were messed up. You can reapply root once the update to 11 is finished though, so you can still have root.
In your case manually upgrading to 11, letting it finish the upgrade, and then installing Magisk again is your best bet, in which case you would either have to find something that understands the update format or manually extract the updated partitions from the payload, iirc
Click to expand...
Click to collapse
Hi, thanks for responding. I am not even concerned about root right now, just want my phone to boot up first Any suggestions on what can I try?
sam_htc_touch said:
Hi, thanks for responding. I am not even concerned about root right now, just want my phone to boot up first Any suggestions on what can I try?
Click to expand...
Click to collapse
For the benefit of others, all sorted finally y'day evening. Plenty of helpful tips in this thread
(Well I was able to boot into Android 11.1.1.1 - no root as yet, but I will perhaps look into that later, can't stand those annoying ads :-D )