Related
Hi,
Redmi 3s, rooted
same issue with both MIUI 8 Global 6.11.3 and Xiaomi.eu 8.0.10 stable ROMs:
Both MissedIt and TeslaUnread loose their notification access (which they need to know about unread messages/mails etc...) after every reboot.
In the system dialog, the notification access is still activated after reboot, but when I open e.g. teslaunread, it says that I need to grant it notification access. I toggle the access off/on, everything works ... until the next reboot.
From a bit of googleing, this seems to be and old and known issue, but none of the threads I found ended in a resolution. Any thoughts about this one?
One eery similarity to the USB-MTP issue I posted on a parallel thread is that in both cases, the system dialogs still pretend that the settings are ok.
tdklaus
Same issue !
I was so happy that OP finally released H2OS 2.5, this one is probably the best ROM with custom UI, unlike MIUI or Flyme, it is still in Material Language. However, after a clean flash, I found it is not pre-installed entire google service and it doesn't work well with OpenGapps. Here is the tutorial.
Before I start, make sure you have installed a custom recovery like TWRP. If not, go to twrp.me and flash the recovery via fastboot. And BTW, plz forgive my poor English, if there are any mistakes, leave the comments blow, Thank you!
1. Install H2OS 2.5(I believe you already did this) and Root package.
2. After the setup, reboot to Recovery, choose Mount - System. then flash OpenGapps, in this step, I suggest you guys choose Nano version, mini version will replace the stock calendar with Google Calendar and other variants of Gapps will replace more stock apps.
3. Go to Advanced - File Manager, delete /system/priv-app/SetupWizard/setupwizard.apk
DO THIS NO MATTER YOU CAN ACCESS GOOGLE OR NOT, OTHERWISE YOU WILL NOT ENTER LAUNCHER!
4. After the reboot, Install and Open Titanium Backup, Tap Backup/Restore and you will find several Google-related apps are frozen, tap those and defrost them.
5. Convert Google Contacts Sync into user-app, after that go to Settings - Apps - Google Contacts Sync - Permissions, grant the permission on read contacts.
6. Reboot and Enjoy, don't forget use a proxy if you are in China!
----------------------------
To enable Screen Search (Google Now on Tap), go to Settings - Buttons - Home Button, Long Press Action - Search Assistant.
If your phone still can't work somehow, try following steps.
1. Install and Open Nova Launcher, long press screen - Widgets - Activities. Then choose Settings - Assist & Voice input
2. Open this shortcut, tap Assist app and choose None, after that tap Assist app again and switch back to Google app.
OP made their own Default App selection interface, so you can't go to Settings - Apps - Gear Icon - Default apps to select correct search assistant. That's why we need Nova Launcher to open this interface.
Screen Search should work then.
I already installed it using the Google Installer APK, so this method is of no use to me, but I sincerely hope it benefits several others.
Wow, you really seem to know your way around H2OS.
Could you help me with a problem I've been facing? I installed Pixel Launcher, and there's a hideous blue portion of the wallpaper that I can't remove. I understand you need to switch to the OnePlus Launcher to modify the wallpaper, so I switched to the OnePlus Launcher, changed the wallpaper, but the blue portion still persists.
Edit: http://imgur.com/a/IyixM (screenshot for better understanding of the issue)
Shanmukh1608 said:
I already installed it using the Google Installer APK, so this method is of no use to me, but I sincerely hope it benefits several others.
Wow, you really seem to know your way around H2OS.
Could you help me with a problem I've been facing? I installed Pixel Launcher, and there's a hideous blue portion of the wallpaper that I can't remove. I understand you need to switch to the OnePlus Launcher to modify the wallpaper, so I switched to the OnePlus Launcher, changed the wallpaper, but the blue portion still persists.
Edit: http://imgur.com/a/IyixM (screenshot for better understanding of the issue)
Click to expand...
Click to collapse
There are additional options when changing wallpapers in the h2os launcher. I don't think you can entirely get rid of the colour blending at the bottom but you can change the colour and the area it covers. The one exception I have found is the Google wallpapers app, that is full screen.
My notifications don't sync with my android wear. Do you maybe have a fix for this, since this is the only reason I can't use H2os
https://forum.xda-developers.com/pr...device-development/gsi-benzo-rom-9-0-t3837127
I KNOW I'M ASKING A LOT FROM YOU GUYS, BUT I CAN'T RISK LOOSING DATA AS THIS IS MY MAIN DEVICE.
I'm presently on PR1 rom which was ported to our devices by @GtrCraft which is crazy stable. Any minor bugs that exist can be overcome easily by a simple reboot!!
I really wanted to install this as this room is based on pr2.
Pls also tell if this rom has inbuilt pixel launcher integration for recents. Lack of it can be a deal breaker as this was the only reason I reverted from arrow rom. I need all the Google pixel features as I think I'm addicted to those.
THANKS AND SORRY FOR TROUBLING YOU GUYS!!!
Ok...you know you can just do a nandroid backup of your current ROM and be literally ironclad safe if anything goes wrong?
Just hit "Backup" in TWRP and backup System, System Image, Data (excl. storage), Cache, Boot, (and EFS and Persist just to be safe).
Then flash PR2 to your heart's content and test it out yourself. If it ****s up in any way, reboots randomly, texts your ex, begins running missile launch codes or anything else you don't like......go reboot back to TWRP, "Restore", and choose your backup. Back to how it was before like a time machine.
Why are you still using gsi when we have stable pie rom. You can install pixel launcher with piee recents and suggestion in any rom just so you know. Here are the screenshots from arrow 9.0
jDally987 said:
Ok...you know you can just do a nandroid backup of your current ROM and be literally ironclad safe if anything goes wrong?
Just hit "Backup" in TWRP and backup System, System Image, Data (excl. storage), Cache, Boot, (and EFS and Persist just to be safe).
Then flash PR2 to your heart's content and test it out yourself. If it ****s up in any way, reboots randomly, texts your ex, begins running missile launch codes or anything else you don't like......go reboot back to TWRP, "Restore", and choose your backup. Back to how it was before like a time machine.
Click to expand...
Click to collapse
It's just that I don't have sufficient space to finish backup!!
sinchan_nohara said:
Why are you still using gsi when we have stable pie rom. You can install pixel launcher with piee recents and suggestion in any rom just so you know. Here are the screenshots from arrow 9.0
Click to expand...
Click to collapse
The last time I tried, the feature was missing!! Can you suggest the version of gapps that you're using? I used stock and the recents integration was not working!
S4xk said:
The last time I tried, the feature was missing!! Can you suggest the version of gapps that you're using? I used stock and the recents integration was not working!
Click to expand...
Click to collapse
For the roms like Arrow Pie, you have to enable the pie recents (labled "swipe up from home button") somewhere in the settings. I think it's at the very bottom in System or something.
For the space issue though, if you don't have an SD card I'd just back everything up to your computer via USB and then backup. Then you can pull the backup off (to your computer) and have that ready in case anything catastrophic happens.
S4xk said:
The last time I tried, the feature was missing!! Can you suggest the version of gapps that you're using? I used stock and the recents integration was not working!
Click to expand...
Click to collapse
Gesture navigation are disabled by default you can enable it in system - gesture
But default launcher is quickstep if you want pixel launcher with working actions and search bar and apps suggestion in recent try either of the following ways.
I am using aroma gapps with arrow os 9.0 i flashed pixel launcher , action service and digital well-being through aroma installer after that you have to paste pixel framework file in vendor->overlay.
If you want a simple procedure there is a magisk module in telegram group that installs pixel launcher ,pixel sounds and pixel boot animations.
Both files can be found in arrow os telegram group. And don't use stock gapps they are not recommended they replace camera libs and camera give issue after flashing them use aroma instead
Thanks.. That'll do.. ??
sinchan_nohara said:
Gesture navigation are disabled by default you can enable it in system - gesture
But default launcher is quickstep if you want pixel launcher with working actions and search bar and apps suggestion in recent try either of the following ways.
I am using aroma gapps with arrow os 9.0 i flashed pixel launcher , action service and digital well-being through aroma installer after that you have to paste pixel framework file in vendor->overlay.
If you want a simple procedure there is a magisk module in telegram group that installs pixel launcher ,pixel sounds and pixel boot animations.
Both files can be found in arrow os telegram group. And don't use stock gapps they are not recommended they replace camera libs and camera give issue after flashing them use aroma instead
Click to expand...
Click to collapse
So I installed arrow and checked the telegram group, but did not find a way to get recents integration working!! Pls help. Can you please provide the zip file of that magisk module??
S4xk said:
So I installed arrow and checked the telegram group, but did not find a way to get recents integration working!! Pls help. Can you please provide the zip file of that magisk module??
Click to expand...
Click to collapse
Just type #goodies or search it and you will get the zip file
See the below image
I'm running Lineage 17.1 Nightly without GAAPs. And the AOSP camera is terrible. Every photo comes out blurry.
I tried installing Gcam V.2.2.1 from Arnova8G2 and OOS camera apks from mirror apk but nothing works. After install I get the same problem, "Camera Keeps Stopping".
Does anyone know of a work around for this. I can't get any camera apk working, (other than the stock pre-installed AOSP camera)
You can't just use the OOS Camera. You need a bunch of other libraries and such to make the OOS camera work.
Once I find a GCam that everything works on I tend to just stick with it. On 17.1 I'm using, 7.2_GCam_Urnyx05-v2.1.apk.
Look here, download GCam from here. (I would start by trying 2.1 since it works for me.)
Other versions are here if you want to try them.
Next to the 2.1 download click the configs link, scroll down to OnePlus 6/6T. These are XML files, I would download the first one natural / noiseless. You can try others later if you want. In internal storage of your device create a folder called GCam, inside that folder create one called Configs7. Place that XML that you just downloaded (oneplus6t-more-naturally-and-noiselessly-v2.xml) inside Configs7.
Now when you open the camera double tap the black area near the button that takes a picture, and select that XML.
OhioYJ said:
You can't just use the OOS Camera. You need a bunch of other libraries and such to make the OOS camera work.
Once I find a GCam that everything works on I tend to just stick with it. On 17.1 I'm using, 7.2_GCam_Urnyx05-v2.1.apk.
Look here, download GCam from here. (I would start by trying 2.1 since it works for me.)
Other versions are here if you want to try them.
Next to the 2.1 download click the configs link, scroll down to OnePlus 6/6T. These are XML files, I would download the first one natural / noiseless. You can try others later if you want. In internal storage of your device create a folder called GCam, inside that folder create one called Configs7. Place that XML that you just downloaded (oneplus6t-more-naturally-and-noiselessly-v2.xml) inside Configs7.
Now when you open the camera double tap the black area near the button that takes a picture, and select that XML.
Click to expand...
Click to collapse
Thank you so much! I did followed everything you said, but I still have the same problem. The app force closes before I get the chance to add the config. I tried enabling all of the permissions from "app info" along with allowing it to "modify system settings". But it still force closes
https://ibb.co/NSShkNN
Lifewithoutdeath said:
Thank you so much! I did followed everything you said, but I still have the same problem. The app force closes before I get the chance to add the config. I tried enabling all of the permissions from "app info" along with allowing it to "modify system settings". But it still force closes
https://ibb.co/NSShkNN
Click to expand...
Click to collapse
Just out of curiosity, Does installing WebView fix it? ? (You can uninstall it if it doesn't).
Im trying to think of what might be different since this works for me. Some apps require webview and will crash immediately if you dont have it. The LOS browser should work for this, but I've found for many apps it doesn't. There is a a library that is required for WebView on some ROMs (like Omni), but Ive never needed it on LOS.
OhioYJ said:
Just out of curiosity, Does installing WebView fix it? ? (You can uninstall it if it doesn't).
Im trying to think of what might be different since this works for me. Some apps require webview and will crash immediately if you dont have it. The LOS browser should work for this, but I've found for many apps it doesn't. There is a a library that is required for WebView on some ROMs (like Omni), but Ive never needed it on LOS.
Click to expand...
Click to collapse
Sorry for the late reply. I installed webview, but that didn't change anything.
It's also worth noting that after flashing Lineage, I lost my TWRP recovery. I then flashed Magisk through Lineage's supplied recovery.
I wish there was a simple solution for this. I came from OmniRom and Omni had the stock OOS camera and it was great! But without GAAPS installed, Omni is way too glitchy for my liking. That's the only reason why I'm using Lineage, to avoid random app force closures....guess I didn't avoid it entirely with the camera issue
Lifewithoutdeath said:
Sorry for the late reply. I installed webview, but that didn't change anything.
It's also worth noting that after flashing Lineage, I lost my TWRP recovery. I then flashed Magisk through Lineage's supplied recovery.
I wish there was a simple solution for this. I came from OmniRom and Omni had the stock OOS camera and it was great! But without GAAPS installed, Omni is way too glitchy for my liking. That's the only reason why I'm using Lineage, to avoid random app force closures....guess I didn't avoid it entirely with the camera issue
Click to expand...
Click to collapse
Wait.... Several things in there. So did you use the MicroG version of Omni then? As Omni can use Gapps if you use the regular build of Omni? Next did you just flash LOS straight over Omni? This maybe giving you issues. Also that GCam folder must be in place otherwise it won't work, you did that step right? As for recovery, yes, you have to flash TWRP after LOS to keep TWRP.
I have a Lineage Install Guide here. The second post has the cliff notes version if you want. However the long version does have some extra stuff in it, like passing safety net and such.
OhioYJ said:
Wait.... Several things in there. So did you use the MicroG version of Omni then? As Omni can use Gapps if you use the regular build of Omni? Next did you just flash LOS straight over Omni? This maybe giving you issues. Also that GCam folder must be in place otherwise it won't work, you did that step right? As for recovery, yes, you have to flash TWRP after LOS to keep TWRP.
I have a Lineage Install Guide here. The second post has the cliff notes version if you want. However the long version does have some extra stuff in it, like passing safety net and such.
Click to expand...
Click to collapse
Yes, I tried the micro-g version on Omni...twice. I haven't tested the standard version yet. When I flashed Omni, however, I didn't flash it over OOS. It was a clean flash.
I did not flash Lineage over anything either.
Yes I have that GCam folder in my internal storage, as instructed.
Appreciate the info, I'll check out your install guide!
Edit: Worth mentioning that when I used Omni. Both times, there was a broken google search bar at the top of the app home screen page. Couldn't get rid of widget, use it, nor move it. It was stuck in place, and no longer said "Google". It was an entirely blank search bar.
In order for the custom ROM (ColtOS v) to be rooted, I use Magisk R.
After launching the application, in the bottom horizontal menu (4 symbols), all you have to do is check the second option, and the Hide option is displayed. A click on it displays the list of applications. I click on the app for which I want to make the root invisible. After launching the application in question, it works NORMALLY as on a non-rooted smartphone.
And it is not.
In Magisk, the check mark on the target app does not stay active.
Have I been the victim of a virus, at least a malicious code?
Thanks for reading
With a clean install of EvolutionX 4.7 with Magisk 20.4, no more problems at all.
For the other ROMs, I will wait for the switch to Android 11
I even found that the internet problem via 4G was solved
Everything's fine