Related
I was wondering if anyone else is having issues with bluetooth on their Archos 101. I can't tell if perhaps my hardware is flaky, or if its a software issue.
Basically, bluetooth seems to work sporadically. Sometimes it pairs like it should, other times it is a fight just to get it to pair with my phone, laptop or bluetooth keyboard. Often times I have to reboot just to get it to pair and it seems to really struggle if both bluetooth AND wifi are enabled.
I'm running the stock current ROM and outside of the android market APK and some basic apps, I haven't done anything wacky or weird to it.
I guess I'm just looking for some validation and/or confirmation and/or possible fixes if any.
Sorry, i have experienced no issues with bluetooth apart from forgetting to switch it on
I have had some issues as well. Paired a set of Motorola S9 bluetooth stereo headphones. They pair and connect fine, but the audio is choppy. It will sound fine for 15-20 seconds and then it will skip, go silent, bring back audio, etc. Tried playing same audio through unit speakers and no problems. I also have an Archos 70 tablet and have no problems with the same headset. Both have been updated with the Froy 2.2. Starting to think it might be a hardware issue with the 101. Anyone have any other thoughts?
Never had it working
I always get paired but not connected. Never have been able to get it to work.
The same problem. Pair, but not connect!
I've never found problem about bluetooth (Archos 101 - firmware version 2.1.08)
Pair & connect with DELL BH200 (Bluetooth Headset) - work fine.
Pair & connect with DELL BT Travel Mouse - work fine.
i'm getting major issues on my new replacement 101. did you ever sort your issues? i'm using latest fw.
its really hit or miss (mostly miss) whether it actually see's any BT devices when it scans. yet wifi works fine 100%
I experiment something very similar with my 101, this both on standard Android and Urukdroid 0.7 or 1.0 :
- very difficult (multiple tries have to be done) to get successfull peering.
- with BT enabled phones
- with BT GPS (G-Sat BT-368i, wich is given in forums to work well on our gen8 devices)
- for the GPS (which is the BT device that interest me) : impossible to have it working directly from GoogleMap, I got some success with "Bluetooth Gps Provider" appli from Market). This device is never shown as connected from the BT Parameters.
Could it be a hardware problem, that is do I have to return the tablet to archos ?
Thanks for your experience feeling about the fiability of the BT on 101 tablet.
It generally works fine for me, but a couple days ago it got stuck, and it would not allow to send me files to other devices until I rebooted the Archos. The same day I was also using bluetooth headphones and the wifi network together, and I had audio stutter problems. It seems that wifi has a negative effect over bluetooth stability.
It works for me... though
Bluetooth is not working on my Archos 101.
When I try "scan for devices" it shows 1 or 2 devices, while my HTC HD2 shows about 5. When I click again on "scan for devices" - sometimes it is howing different device, sometime shows bloothooth adress only.
Evan my HTC can see Archos, it cannot pair with it. Archos never see my HTC.
Zalek
Same here
I can pair with my phone (htc desire hd) but cant connect.
I need my phone connected for gps.
Nobody has a solution ?
No solution ?
Thanks
BT has some issues for me too with an A43.
BT+wifi means i either can't get a proper internet connection, or BT devices disconnect.
quite annoying, because i want to be able to use my BT mouse with the internet browser.
and my jabra halo headset connects in dumb mode (no media/volume controls) most of the time.
which is annoying, because it means my headset is stuck on the volume i last used.
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Think I've sorted out bluetooth problems
I also have had real problems with the bluetooth on Archos 101 - pairing but not connecting, causing "Location & Security" to crash when I attempted to open it (in settings). I updated the firmware to 2.4.19 and then rebooted - still the same problems, so I did a full initialization and hey presto all problems seem to have vanished ! A pain because I've now got to re-download all the apps I had before but at least the tablet is working as it is supposed to.
Hope this helps others.
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
Hello
How can I backup all my data?
Thks
Followed your instruction however it is not work for me. I am running the last patch (2.4.19)
Thanks
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
It is not working for me.....
Archos 101 Bluetooth Problem - Known issue?
I'm having the same problems. I contacted Archos support and they told me to do a full reinitialization. This did not resolve the issue.
When scanning for bluetooth devices, nothing shows up until the 5th or so attempt.
The mac address of the discovered device is shown instead of the device name.
When attempting to connect it fails several times, then it pairs but says "paired but not connected."
When I finally connect the audio stutters. It's extremely choppy... useless.
If the bluetooth is left on, the 101 will eventually freeze when the screen sleeps and cannot be woken up by pressing the power button. The green light stays on when this happens. Pressing the button a few times or holding it in reboots the 101.
After reading all the posts I've come to the conclusion that Archos likely knows about this issue.
Archos, if you're reading this, for the sake of your customers, please admit this is a known issue and let us know if it's fixable and when a possible fix may be available.
I encourage everyone to open a ticket with Archos support.
If you purchased your 101 used and it's been registered by the previous owner, you can register it and the registration will be instantly transferred to you.
Create a support account at archos.com
After you create an account you can add products to your account and submit tickets for them.
Firmware: 2.4.81
Board ver: A101IT-V5
OMAP ver: ES1.2
Boot ver: Unknown / 4.04.000000
My bluetooth device: Jensen WTB210. Works fine with several other android devices.
Anyone else on the newest 7.0 preview and unable to pair their bluetooth with their car?
Driving me nuts...hoping someone found a fix...
bongostl said:
Anyone else on the newest 7.0 preview and unable to pair their bluetooth with their car?
Driving me nuts...hoping someone found a fix...
Click to expand...
Click to collapse
Right after the DP5 installation, I had to unpair the phone and car (2016 Mazda) because the phone would never connect. It was no where near as easy as that sounds, took me the better part of 30 minutes because of repeated "unknown errors" coming from the car.
The phone paired up just fine but I still have frequent and completely unexplained dropouts on literally every Bluetooth device I have (headphones, Moto 360, car and the list goes on). So far this has been the absolute worst of the previews for BT that I have ever seen.
But then, if you read around here, it sounds like there were a lot of these that had flaky BT hardware. Have not exchanged mine, but that has certainly been my experience since I bought this back in December.
I have no issues with Bluetooth and the latest DP. I have my phone connected to a Kenwood deck.
Sent from my Nexus 6P using Tapatalk
I wonder if I have flaky BT hardware? Mine was a launch phone and it has worked perfectly in my Toyota since day 1. However I've recently bought a fitbit type band and with that application (veryfit 2.0) installed and connected to the band then if I make a call in car it drops the BT after about 30 seconds with an error message on screen saying 'corrupted probe message'. I can manually reconnect the call (it's still active on the phone) but after another 30 seconds or so it repeats the cycle. Have upgraded to Nougat Dev Preview NPD90G but still the same. Removing the app and its binding (it binds in the app not the phones BT devices in settings) and rebooting the phone resolves the issue. Tried again with a proper fitbit and the issue is identical.
I will RMA it to see if I get another one that works. Now to figure out how to put it back to stock marshmallow. gulp.
I have the same issue pairing to my car's Bluetooth keep pairing failed
bongostl said:
Anyone else on the newest 7.0 preview and unable to pair their bluetooth with their car?
Driving me nuts...hoping someone found a fix...
Click to expand...
Click to collapse
I had this same issue, I flashed the system file again and wiped the cache and dalvik. It seems to be ok now.
Check this solution. Pair with '0000' worked for me.
http://forum.xda-developers.com/nexus-5x/help/issue-android-nougat-bluetooth-issue-t3446073
Since switching from my Nexus 5 with 6.0.1 to a Nexus 6P with 7.0 I am also suffering from bluetooth issues. Pairing itself is not a problem but the connection sometimes drops, controls in my car don't work properly, remaining track time is not shown, etc. Haven't even tried to make calls yet. If I can't find a solution I'll probably be going back to 6.0.1.
The proposed '0000' solution is not working for me as I cannot change the PIN on my Seat Leon (2016). The PIN is autogenerated and shown on both displays to be confirmed upon pairing.
Has anybody tried flashing the latest 6.0.1 radio image and use it with a 7.0 system?
Hello all.
I am having some bluetooth connectivity problem with my moto g 4 US xt1625 Retus channel (non amazon version) stock everything.
Basically the connection to my smartwatch is unstable and keeps dropping on and off.
Normally I would be blaming the smartwatch for this BUT it connects absolutely perfectly to my moto G2 (cyanogenmod 14) without any hint of misbehavior
I've already tried;
Forgetting and re-pairing device (also rebooting phone before repairing)
Factory resetting watch
clearing app data and cache of system bluetooth apps ("bluetooth share" and "bluetooth MIDI")
Disabling 4G (sometimes interferes apparently)
Disabling wifi
Running phone in safe mode.
*edit - also tried disabling power optimisation for both system bluetooth apps AND the watch companion app
I also reconnected my smartwatch to my old moto G 2 after trying all these things and it still works perfectly.
Old moto G2 had blutooth 4.0 LE and this moto G4 has bluetooth 4.2 LE which would offer no comparability issues.
Has anyone had any similar problems with their bluetooth?
Thanks in advance
I think my next move will be to root, and start removing G apps that could be interfering with the bluetooth connection
hotdog18882 said:
I think my next move will be to root, and start removing G apps that could be interfering with the bluetooth connection
Click to expand...
Click to collapse
I have had a problem with my Fitbit connecting that didn't happen on my G2 or G3. I keep my cordless home phone connected with no problem though. What I have to do is forget the Fitbit in my bluetooth devices and it connects fine. If it's even showing up in the bluetooth devices it won't connect. That seems strange that it will only connect that way but others have reported the same thing. Maybe try and see if it connects after you forget it in the bluetooth settings and it's not even showing up.
Sent using XDA-Developers Mobile App
Tel864 said:
I have had a problem with my Fitbit connecting that didn't happen on my G2 or G3. I keep my cordless home phone connected with no problem though. What I have to do is forget the Fitbit in my bluetooth devices and it connects fine. If it's even showing up in the bluetooth devices it won't connect. That seems strange that it will only connect that way but others have reported the same thing. Maybe try and see if it connects after you forget it in the bluetooth settings and it's not even showing up.
Sent using XDA-Developers Mobile App
Click to expand...
Click to collapse
OK maybe you're on to something.
If I connect to the watch using the companion app, then enter bluetooth settings and "forget" the device..... It still appears to be connected
But a few seconds later, it automatically pairs and re-appears in the "paired devices" list.
Is there a way to prevent re-connect?
Actually, after "forgetting" it several times, It's staying connected and has done for a 15 minutes now.
I'll report back if and when it disconnects.
Cheers
Ok so the watch disconnected a couple of times in a few hours. (this is a huge improvement from before)
Each time, "forgetting" the watch in bluetooth settings caused an automatic re-pair and return to good connection.
Maybe I can use "tasker" or similar app to automate this unpair upon disconnect?
Cheers
hotdog18882 said:
Ok so the watch disconnected a couple of times in a few hours. (this is a huge improvement from before)
Each time, "forgetting" the watch in bluetooth settings caused an automatic re-pair and return to good connection.
Maybe I can use "tasker" or similar app to automate this unpair upon disconnect?
Cheers
Click to expand...
Click to collapse
Yeah, it's strange that it works that way. I think it's the device not compatible with that version Bluetooth. My Fitbit doesn't try to reconnect once I forget it unless I make it pair then it will actually work sometimes and sometimes it doesn't when paired. It always works if I don't pair it at all. Have you tried clicking on the gear besides your watch in more settings once it connects and unchecking what ever connectons it shows in the check boxes?
Tel864 said:
Yeah, it's strange that it works that way. I think it's the device not compatible with that version Bluetooth. My Fitbit doesn't try to reconnect once I forget it unless I make it pair then it will actually work sometimes and sometimes it doesn't when paired. It always works if I don't pair it at all. Have you tried clicking on the gear besides your watch in more settings once it connects and unchecking what ever connectons it shows in the check boxes?
Click to expand...
Click to collapse
If i click the gear next to the watch in the bluetooth settings, the only options i have are to rename the device, or to forget it
I have no checkboxes or anything like thar.
Do you have advanced bluetooth settings installed or something???
hotdog18882 said:
If i click the gear next to the watch in the bluetooth settings, the only options i have are to rename the device, or to forget it
I have no checkboxes or anything like thar.
Do you have advanced bluetooth settings installed or something???
Click to expand...
Click to collapse
Some of my devices have check boxes for contacts, audio, etc. but not all. I thought maybe that would be something to look at.
Sent using XDA-Developers Mobile App
Ok, its still messing around. I'm going to install the Temasek unofficial cyanogenmod 13 and see if that is an immediate fix, or if the additional options offers a fix.
Cheers
update;
after ugrading moto g4 to android nougat (7.0.1) I no longer have any issues with bluetooth connectivity.
6.0.1 was to blame!
my phone is updated to stock Nougat also and still having bluetooth issues staying connected to my car (2012 ford fusion with mysync) I will be keeping an eye on this thread.
vrm4 said:
my phone is updated to stock Nougat also and still having bluetooth issues staying connected to my car (2012 ford fusion with mysync) I will be keeping an eye on this thread.
Click to expand...
Click to collapse
I seldom connect my phone to mysync but my wife does. She also keeps her G4 connected to the Panasonic home phone system while home. I've noticed that since the update to Nougat mysync is very slow to connect on her phone. The Panasonic cordless phone seems to connect fine. Mysync will usually connect although she has to drive for 10 or 15 minutes before it does occasionally and other times it connects instantly. One time I had to delete her phone in the car and add it back. I wondered if it was a problem of it not disconnecting from the Panasonic, but that shouldn't be past the end of the driveway. Then again it may be just a rip in the space time continum. ?
Sent from my SM-T530NU using Tapatalk
I have 3 main devices that I pair to my phone via bluetooth: watch/lg tone/car
The watch stays paired with no issues, but the watch is having issues swapping from the lg tones to the car and vice versa.
Anyone found a remedy for this?
As of now, I have to go into the bluetooth settings of the one I don't want to use and deselect media/phone, then go to the other and select media/phone. And even sometimes this takes multiple times to work.
My previous phone (gs7) had no issues swapping from the two.
Hi,
Did you get a solution ? I face the same problem and can't find any solution...
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
ArkAngel06 said:
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Click to expand...
Click to collapse
It's not in my car but with the bluetooth device of my motorcycle helmet. The reference is ncom bluetooth kit 3. I have to connect it manually and it takes several attempts before it connects. Sometimes it doesn't connect at all....
I have 2 headset Plantronics Backbeat Pro and Plantronics Backbeat Fit. They both work flawlessly
My Huawei Watch also works.
But my Nokia 616 Car kit wont connect at all.
And my motorcycle hemlet bluetooth kit, Cardo scala rider PACKTALK, connects, but the audio is slowed down to about 80 percent?
Same thing here.
I have been facing problems with a Sony SBH52 Headset and with my Opel Corsa E, stock infotainment system.
It gives me a hard time connecting but when it does it's stable.
I had the same with my gen 1 Moto 360 but after a factory reset to the watch and a reboot it's stable.
Sent from my ONEPLUS A5000 using Tapatalk
yubimusubi said:
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
Click to expand...
Click to collapse
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
suizdude said:
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
Click to expand...
Click to collapse
Ahem, I seem to be unable to find bluetooth in my app settings. Can you please give me a hint?
It's been driving me crazy these days with my SBH-52 and I want to try this too.
Thanks!
P.S.
I'll also give it a shot with a plantronics pro headset I have to see if it does the same.
Bluetooth profiles implementations, even though they passed certification, are not always made equal! So don't end up pulling your hair if a certain BT device doesn't play nice with another.
Just as an example... Head Unit X had big issues with the initial contacts sync, right after pairing with Samsung phones (already known to sometimes play around some other standards). It would only work after several reconnects. After several weeks of debugging (poor development guys) and reproduction test (poor testing guys) it was concluded that it is a phone issue caused by some wrong timing delays in the process of exchanging information between the HU and the phone. Samsung was informed and the ticket was internally closed.
I have similar problem with Bluetooth Earbuds. Phone simple doesn't "see" the Earbuds. But strange - it can see other Bluetooth devices and other devices can see Earbuds.
I'm sure this is a OnePlus 5 software problem.
Version OxygenOS 4.5.10
i have somhow issue as urs, i have Bluetooth pad lock and android watch, it sometimes connected and sometimes not, i do believe its software issue, im on 4.5.11
Yes, it is strange. After some restarts and on/offs connection suddenly appears
Running my Mi A1 with stock ROM but having numerous bluetooth issues.
It will connect to my earphones without issue, and to my keyboard. However it will not connect to my Ford Fiesta, or to my Amazon Echo. Tested my oneplus 3 with these to confirm and they work fine, so its purely the Mi A1.
I have tried clearing bluetooth cache and forgetting the link.
Any other steps to resolve this?
Generally the devices never even connect at all, says connecting then gives up.
Update: ran the latest software update so I am now running 8.1, still not able to connect to 99% of the devices I try, says pairing then gives up. Any ideas?
I have some BT issues as well, this is my experience.
With Oreo 8.1 stable (updated OTA from 8.0) I was unable to pair further BT devices ("wrong PIN or passkey"),
although those paired previously (some from Nougat) still worked. Neither clearing BT cache and data or resetting
the network settings helped. I saved a couple of logcat logs during the unsuccessful attempts to pair a BT headphone and a BT speaker that worked earlier.
After a full factory reset BT pairing starts working again, although it seems that this happens only for a while,
then it may stop again, maybe I have some interfering app or whatever. I am not trying to delete some paired device
to check again.
This issue is still ongoing, tried more devices and same issues.
Another one I tried is connecting my phone to a bluetooth keyboard (Anne Pro). This works fine, however now the phone keeps popping up with "Please connect a keyboard".
azboxgo said:
I have some BT issues as well, this is my experience.
With Oreo 8.1 stable (updated OTA from 8.0) I was unable to pair further BT devices ("wrong PIN or passkey"),
although those paired previously (some from Nougat) still worked. Neither clearing BT cache and data or resetting
the network settings helped. I saved a couple of logcat logs during the unsuccessful attempts to pair a BT headphone and a BT speaker that worked earlier.
After a full factory reset BT pairing starts working again, although it seems that this happens only for a while,
then it may stop again, maybe I have some interfering app or whatever. I am not trying to delete some paired device
to check again.
Click to expand...
Click to collapse
Did you ever manage to isolate the cause of this? I still can't connect to devices
Fenwick17 said:
This issue is still ongoing, tried more devices and same issues.
Another one I tried is connecting my phone to a bluetooth keyboard (Anne Pro). This works fine, however now the phone keeps popping up with "Please connect a keyboard".
Click to expand...
Click to collapse
I have never had a problem but have read in several threads people say they have trouble pairing with Bluetooth while Wifi is turned on, not saying it will work but try turning off the Wifi and maybe data too and see if it helps, other have reported it does.
Done another factory reset, issue still persists. Have tried removing all Bluetooth devices, wifi, and mobile network off. Still unable to connect to a bunch of devices.
Tried a bunch of different things, but still can only connect bluetooth to my earphones, and sometimes Amazon Echo. Everything else will just say connecting and then stop.