Related
Hi,
I am looking to buy a car charger for HTC Fuze
There are so many listed like at Eforcity and BargainCell
would anyone of them is fine?
Is there a decent place other than those two? Above places are just charging more on shipping than the actual cost of the charger
Thanks
The easiest way would be to swing by an ATT or Verizon store.
I do have several and they are all rated 5 V (rarely you'll find 12V) but use one of these. They are pretty slick because you can charge ALL USB devices and, if you travel, it's a "one-for-all" device (meaning I can charge my headset which has a USB cable, iPod Nano and the phone.
http://www.daydeal.com/product.php?productid=10892
If you travel a lot you may look into one of these as well
http://www.bixnet.com/usbbatterybox.html
There is also one which does both, AC and cig. input to USB output, a little bit bulky though, but I couldn't find the link right now.
how is that compared to this one
http://www.amazon.com/Charger-Generation-Antenna-Booster-Google/dp/B001LP2ME0/
Comparison:
They both charge
The one you listed is cheaper (even incl. shipping)
Not that flexible
I don't know what other USB devices you have to charge, meaning if they have different cables for different devices, I do.
The Last Car Charger You Will ever NEED!
This has worked for me so far....total $19.81 shipped (2 to 3 days)
http://www.amazon.com/s?ie=UTF8&field-zipjids=32931&x=8&y=18&field-keywords=Black%20%26%20Decker%20PI100SB&url=search-alias%3Dwireless-aps
tyguy said:
Comparison:
They both charge
The one you listed is cheaper (even incl. shipping)
Not that flexible
I don't know what other USB devices you have to charge, meaning if they have different cables for different devices, I do.
Click to expand...
Click to collapse
the reason I mentioned that one was I could not find anyone for 5V
all are 12V
in your first post in this thread you mentioned you have all 5V ones
http://www.dealextreme.com/details.dx/sku.13522
i bought 1 of these. works great. has 3 inputs and 1 usb port.
My solution to the car charging problem has been a power inverter. You can charge your phone using your house charger, and plug in other stuff at the same time. The last one I bought even had a couple of USB ports so I can use a standard USB cord to charge various devices. Also handy for plugging in my laptop, dvd, tv, etc.
tyguy said:
Comparison:
They both charge
The one you listed is cheaper (even incl. shipping)
Not that flexible
I don't know what other USB devices you have to charge, meaning if they have different cables for different devices, I do.
Click to expand...
Click to collapse
but the one I mentioned is listed at 12V
will it make a difference?
zenithcoolest said:
but the one I mentioned is listed at 12V
will it make a difference?
Click to expand...
Click to collapse
A car's battery is 12v. So when they say 12v, they are referring to input. It should then regulate that 12v to 5v (USB spec). If you are worried that this one does not have this regulator, spend a few extra dollars and get a better one.
A car charger should have a regulator anyway, because your car's alternator can output up to about 20v. For USB devices, it needs to be regulated to 5v, or damage may occur.
Howler82 said:
A car's battery is 12v. So when they say 12v, they are referring to input. It should then regulate that 12v to 5v (USB spec). If you are worried that this one does not have this regulator, spend a few extra dollars and get a better one.
A car charger should have a regulator anyway, because your car's alternator can output up to about 20v. For USB devices, it needs to be regulated to 5v, or damage may occur.
Click to expand...
Click to collapse
so which one would you recommend buying? thanks
types of usb connectors
Hey guys, tell me please are there two types of USB connectors to TP ?
I mean the one is like a regular mini USB and the other is an asymmetric one ? Because i ordered ones a car charger from ebay and got the one with the mini USB connector although my TP has the second one.
This is the one i think of buying http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250434240310&ssPageName=ADME:X:RTQ:US:1123
TP has a special usb head for multimedia etc, but for charging use, your item would be ok.
have not had a look at your ebay link (at work) will go home to confirm
Old Motorola Car Charger
I use the car charger from my old Motorola Razr. It has a charging light and charges quickly, however, the Razr will not charge from the Fuze home charger...David.
It seems that there is an important issue about car chargers, which isn't mentioned in this thread. The HTC car charger is 2 ampere, where othere chargers (like the one I bought on Ebay) or only 0.5 ampere. This is problem when having heavy load on your Touch Pro. It then actually still drains battery while charging.
I'm in the UK and want to save $20 on the charger
I have a couple of Micro USB wall chargers that i use on my blackberry. They will fit the N1 and plug straight into the wall. Would they be safe to use, to charge my N1. (These charges are rated 750mHA).
I know the N1 will be supplied with a micro USB cable. I also have an IPhone wall socket plug head, the ones where you just put the USB cable into the plug and then it goes into the wall. Are these safe to use too, for charging the N1?
Thanks
the Nexus one connector is standar microUSB and therefore will work with standard microUSB cables and chargers.
So there is no type of resistor or transformer in the official plug head? ... to restrict power. I thought there would be as my blackberry charger has a 750mha rating on it.
I can understand the USB cable will work as its a limited power output from a laptop port. But just wanted to check the official wall outlet plug current isn't being restricted. The last thing i want to do is fry my new N1.
Cheers,
Just plugged mine into my old nokia classic micro usb and it is charging fine
The specs for the wall charger are 5V and 1A.
http://www.htc.com/europe/product/nexusone/specification.html
do what i did. remove the charger from your basket and use the supplied USB with an old htc charger if you have one. If not get one for a few quid from ebay why spend $20 when you can get one for $5 odd from the market/ebay.
I can only speak anecdotally, but I used a Blackberry Storm charger and nothing exploded
this mini, micro, A B stuff is annoying. to clarify for my simple mind, will usb cables that fit into my G1 fit into the N1? or is it a different size?
Last year, Micro USB was decided as the open standard for cell phone chargers, so this should be replacing Mini USB as seen on earlier phones (BlackBerries, G1) in instances where the port isn't.. some.. proprietary crap.
Edit:
j.books said:
this mini, micro, A B stuff is annoying. to clarify for my simple mind, will usb cables that fit into my G1 fit into the N1? or is it a different size?
Click to expand...
Click to collapse
No. The G1 used Mini USB, this is Micro USB. The phone comes with a charger and USB (USB-A 2.0 to Micro USB 2.0) cable.
It's not propitary so it will work with any other charger.
It's a funny thing to find. It's too new to be widely available
I went looking for a car charger and a straight USB A->Micro B cable. The former I found by poking in all the packages for different phones until I found it (found a Samsung charger that uses it, although they did want nearly £30 for the damned thing). The USB A->Micro B I drew a blank - the more clueless salesmen tried to convince me that I was mistaken and I meant Mini!
I thought the blackberry used them but I looked in the pile of blackberry cables the local shops had and they were all mini. Even my local electronics store has every kind of USB imaginable *except* micro.
Edit: Found one! (might be useful for UK users). It's out of stock though... http://www.cableuniverse.co.uk/catalog/cables/USB-A-to-Micro-USB-B-Cable.html
Just so you guys know, not all micro USB's are the same. I bought a car charger from a local Tmo store last week (I forget what phones it was for), and although it "worked" when the plug was perfectly perpendicular to the phone, it had quite a bit of lateral play (which the OEM plug does not), meaning anytime it moved in the car, it would stop charging.
I returned it, and am now just waiting for HTC to decide to manufacture accessories for this ever increasing bundle of worry...
I am using a TomTom charger for my N1, also the HTC hero and the Motorola Droid chargers works to charge my N1.
SANTilt said:
Just so you guys know, not all micro USB's are the same. I bought a car charger from a local Tmo store last week (I forget what phones it was for), and although it "worked" when the plug was perfectly perpendicular to the phone, it had quite a bit of lateral play (which the OEM plug does not), meaning anytime it moved in the car, it would stop charging.
I returned it, and am now just waiting for HTC to decide to manufacture accessories for this ever increasing bundle of worry...
Click to expand...
Click to collapse
Seems like it was just a poor quality charger. If it's a micro USB, it should be built to specific specifications. I already bought a few chargers (including a car charger) and cables (for work, home and travel), and they all work perfectly. Technically ALL micro USBs should be the same, unless the manufacturer didn't follow the standards.
TaFFeR said:
Seems like it was just a poor quality charger. If it's a micro USB, it should be built to specific specifications. I already bought a few chargers (including a car charger) and cables (for work, home and travel), and they all work perfectly. Technically ALL micro USBs should be the same, unless the manufacturer didn't follow the standards.
Click to expand...
Click to collapse
Hah, just my luck; I pick up the one out of spec micro USB charger in the entire city!
Although, it must be that particular T-Mobile supplier, as I went to another store and test fitted the same charger, and it had excessive wiggle as well. Either that or my phone is just lame...
I just got a universal charger in Tesco for £5 that has changeable heads (Micro, Mini, Samsung, Sony Ericsson and Nokia 2mm)
Works perfect
- The cable is standard USB. You can use it to charge the phone from your PC, or use another micro USB cable or charger you have
- The Nexus comes with a US 2 pin charger that is dual voltage - works in UK and US. Just spend 50p and get a US to UK convertor plug.
- The charger is rates 5v 1A, so if you have another microUSB charger with the same voltage use that.
I find charging from the charger results in more battery life than USB. The only explanation is charge rate because USB is 500mA and the charger is 1000mA
PS. I removed the UK charger from the order too. You get the US charger regardless in the box.
I lost my usb cable and charger. I need to get a replacement. Where do I get such a thing?
THX!
Your mobile carrier should be selling a smilar one but it won't be htc
Sent from my HTC Vision using XDA App
Most Micro-USB cables will do, as long as you make sure they work for synching data, not just charging. Apparently some cheap ones will only charge, no synch data. You can find them at Best Buy or computer stores. I've even seen them at office supply stores and Target. Or you can buy them online at any number of places, like Monoprice, Amazon or Newegg.
Similarly, any charger that has a USB port will work with a Micro-USB cable to charge the phone.
So this cable is called a "Micro-USB" Cable?
And it is not some proprietary thing from HTC?
Thank God!
convolution said:
So this cable is called a "Micro-USB" Cable?
And it is not some proprietary thing from HTC?
Thank God!
Click to expand...
Click to collapse
lol very well done.
convolution said:
So this cable is called a "Micro-USB" Cable?
And it is not some proprietary thing from HTC?
Thank God!
Click to expand...
Click to collapse
Those are all correct!
I've tried several cables and chargers, including a cable from Boxwave, the sync cable and charger from my Logitech Harmony remote, and (I think) the charger for my Motorola Bluetooth headset. They all work.
redpoint73 said:
Those are all correct!
I've tried several cables and chargers, including a cable from Boxwave, the sync cable and charger from my Logitech Harmony remote, and (I think) the charger for my Motorola Bluetooth headset. They all work.
Click to expand...
Click to collapse
Micro USB is pretty well standardized. I use the charge/sync cable from my Logitech MX revolution mouse and it works just fine.
One thing I would recommend is NOT going to a t-mobile store. Carrier accessories are often 10x + more expensive than from other stores, especially compared to online. Its just goddamn highway robbery the prices they sell those things for lol.
Yeah, the micro-USB interface is an industry standard (in fact, all future cell phones manufactured for use in Europe are required to use it). Very useful for the cable portion (if you check around online or in third-party stores, you can usually pick up one of the Blackberry cables for only a couple of bucks).
One thing you should take note off when buying the charger portion though is supported amperage. The USB spec is limited to only 500mA, so that's what many of the generic chargers will output. I think the HTC charger is 1A though. 500mA should be fine if you are only going to charge while the phone is off, but if you will be using the phone heavily while plugged in, you'll probably want the 1A variety (also charges faster).
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Data pins need shorted together, either in the USB cig plug, or some micro USB cables are this way...
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Thanks
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
mikea3000 said:
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Click to expand...
Click to collapse
It's the Body Glove case from the AT&T store. It was the only one they had at the time, and I didn't feel like waiting to order one so I overpaid in exchange for some piece of mind.
stetsonaw said:
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
Click to expand...
Click to collapse
It's the holder I ordered for my Skyrocket a few years ago. It's a generic adjustable one that fits a lot of different phones with cases. It has fit my SR, GS3, and now my G2, all with cases.
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw.
Click to expand...
Click to collapse
I have a custom 5 inch up angle micro USB cable I ordered from www.usbfirewire.com. It is a very thick wire, thicker than the charging cable the G2 came with. The one in my pic is probably not thick enough for a 2 amp charge.
Here is an interesting article I came across about car chargers:
The Best USB Car Charger
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
Click to expand...
Click to collapse
Spot on. FWIW, the LG OEM cable is 20AWG on the power wires. This is the only viable explanation as I can't get the OEM wall charger to work with any cables I have sitting around (24AWG at best).
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
That's what I'm trying to figure out. I'm tempted to try that Scosche charger, with my thick USB cable. I installed Currentwidget, so I should be ale to see at what rate I'm charging at if I decide to order it.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
EniGmA1987 said:
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
Click to expand...
Click to collapse
I suspect the phone can detect the charger capacity because my OEM LG cable works on both the Apple and Non-Apple ports on the Powergen charger. Since that's the case, the phone doesn't seem to care if the data pins are shorted or not. And the Powergen is advertised as 4.2A total, so 2.1A per port.
kyler13 said:
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
Click to expand...
Click to collapse
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Geekybiker said:
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Click to expand...
Click to collapse
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
The charging issues associated with this phone has been a huge PITA. I've been carrying my stock cable around just so I can charge my phone!!! Subscribed so I can maybe help out with some info...
bova80 said:
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
Click to expand...
Click to collapse
Are you certain that's not just the data side that is 28awg? Very surprised you can pull 1.8A at 28awg.
Sent from my VS980 4G using Tapatalk 4
kyler13 said:
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
Click to expand...
Click to collapse
They are unmarked.
As the title says, has anyone tried using a chromebook charger with their V20? Picked up an Asus C302sa and it uses a 45W usb-c charger. It would be nice to carry just the one but I don't want to fry my phone. Thoughts? Or am I about to be a guinea pig? (I guess if it comes down to it, I can just throw my spare battery in before attempting and hope that's the worst of it.)
I've used a Targus usb c laptop charger and the Anker USB PD on my V20. It works great. If you look on the output info of the charger, you should see a range of values (maybe just 2 for cheaper chargers). Usually there's one high wattage for laptops and one low wattage for phones/accessories.
Thanks! I'll have to see if I can find a magnifying glass to read the print.