My mediapad shows me that over 6GB of storage are used for the firmware. Is there any way to reduce this? Or is this normal?
Thanks
Nick
nickgd said:
My mediapad shows me that over 6GB of storage are used for the firmware. Is there any way to reduce this? Or is this normal?
Thanks
Nick
Click to expand...
Click to collapse
It's normal! The "firmware" is... Android itself!
Thanks for your answer, but I know very well that the firmware is the android operating system. I just wanted to know if 6GB is normal.
Related
Hi all,
I wanted to know if you can increase the memory?
if possible, what memory i can install?
There is a guide to do this?
thanks a lot for answers
alexthevamp said:
Hi all,
I wanted to know if you can increase the memory?
if possible, what memory i can install?
There is a guide to do this?
thanks a lot for answers
Click to expand...
Click to collapse
Not unless you want to go to an aftermarket option, which will void the warranty. There is no user-upgradeable memory except the MicroSD card.
These folks don't specifically mention the 3470, but they could probably do it:
http://www.ppctechs.com
Hi
In the Samsung rom my free space is 9 GB But my phone is 16 GB, I would to re partition and make a 3 GB to system and flash cm11.. How to re partition with the right way??
ahmedsaber20005 said:
Hi
In the Samsung rom my free space is 9 GB But my phone is 16 GB, I would to re partition and make a 3 GB to system and flash cm11.. How to re partition with the right way??
Click to expand...
Click to collapse
Old Story!
In case you have a 9500 model.
http://forum.xda-developers.com/showthread.php?t=2429309
lolo9393 said:
Old Story!
In case you have a 9500 model.
http://forum.xda-developers.com/showthread.php?t=2429309
Click to expand...
Click to collapse
thaks but the rom link it down !!
I9500ZCUCMG1
ahmedsaber20005 said:
thaks but the rom link it down !!
I9500ZCUCMG1
Click to expand...
Click to collapse
Nothing never die!
I9500ZCUCMG1 FW
http://www.sammobile.com/firmwares/3/?download=16618
I hope you know what you are doing, may be it is spare time for you?
in my view it is much better to have ext SD card and to move useless apk at this space. (Or to delete them!!!)
lolo9393 said:
Nothing never die!
I9500ZCUCMG1 FW
http://www.sammobile.com/firmwares/3/?download=16618
I hope you know what you are doing, may be it is spare time for you?
in my view it is much better to have ext SD card and to move useless apk at this space. (Or to delete them!!!)
Click to expand...
Click to collapse
Thanks..
yes you are right but data games or apps need a big internal memory & SD Card is not fast like internal memory
lolo9393 said:
Nothing never die!
I9500ZCUCMG1 FW
http://www.sammobile.com/firmwares/3/?download=16618
I hope you know what you are doing, may be it is spare time for you?
in my view it is much better to have ext SD card and to move useless apk at this space. (Or to delete them!!!)
Click to expand...
Click to collapse
ahmedsaber20005 said:
Thanks..
yes you are right but data games or apps need a big internal memory & SD Card is not fast like internal memory
Click to expand...
Click to collapse
Hi
lolo9393
+1
Mate remember that with this partition you will not be able to flash any other rom but chinese or chinese compatible...
MAX 404 said:
Hi
lolo9393
+1
Mate remember that with this partition you will not be able to flash any other rom but chinese or chinese compatible...
Click to expand...
Click to collapse
what is the best sd card to move the app to it and working fast ??
How can be possible that i have total RAM of 1 GB???
I installed latest android by manual way, everything was corect no problems with instalation... so im running android 5.1 everything is fine just it shows me i have 1GB of total RAM...
look on screenshot below to see what am i talking about :/
Can someone halp me? :/
There is nothing to help you with. The rest is allocated for the gpu
Khaon said:
There is nothing to help you with. The rest is allocated for the gpu
Click to expand...
Click to collapse
So where is the problem? what happened?
EDIT: so you mean that everyone has total size of 1GB ram showing in settings?
Yes.
As you can see it confused many people before you. But everything is OK.
https://www.google.be/search?q=xda+...gb+ram+site:forum.xda-developers.com&safe=off
Khaon said:
Yes.
As you can see it confused many people before you. But everything is OK.
https://www.google.be/search?q=xda+...gb+ram+site:forum.xda-developers.com&safe=off
Click to expand...
Click to collapse
Aha okay thanks a lot
Dear all,
Hello and sorry for my bad English.
Update done with screen update and screen is turned of.
Screen is total black, only back light is turned on.
File 6523lcdconfig.cfg which I've got with firmware from seller caused this situation.
(clnpL10P8-MIPI-yt10-SC7705_720X1280_HAIHANG 20200615 15:37:24).
Look at attached picture.
Yes, I know that I've done mistake, but now is too late.
I don't need to say that seller now trying to avoid any answer to me.
Have anyone 6315lcdconfig.cfg or 6523lcdconfig.cfg or 6521lcdconfig.cfg for this type of display?
(L10P8-MIPI-SAT-ICN9707_720X1280)
Does somebody know where to find this kind of file or how to generate correct one?
Is there some tool like generator or editor?
Google is not friend for this search definitely.
Please help me with this issue...
Thanks in advance,
best regards!
Screen parameters
localos said:
Screen parameters
Click to expand...
Click to collapse
Tnx man!!!
After flashing via USB (plugged before device turned on) I still haven't picture.
Can I do something or I have permanent bricked device?
Anny suggestion?
Maybe I've done something wrong. I've copied files to flash formatted with SD Card formatter.
More pictures with board of this piece of shi*** attached...
racabgd said:
Dear all,
Hello and sorry for my bad English.
Update done with screen update and screen is turned of.
Screen is total black, only back light is turned on.
File 6523lcdconfig.cfg which I've got with firmware from seller caused this situation.
(clnpL10P8-MIPI-yt10-SC7705_720X1280_HAIHANG 20200615 15:37:24).
Look at attached picture.
Yes, I know that I've done mistake, but now is too late.
I don't need to say that seller now trying to avoid any answer to me.
Have anyone 6315lcdconfig.cfg or 6523lcdconfig.cfg or 6521lcdconfig.cfg for this type of display?
(L10P8-MIPI-SAT-ICN9707_720X1280)
Does somebody know where to find this kind of file or how to generate correct one?
Is there some tool like generator or editor?
Google is not friend for this search definitely.
Please help me with this issue...
Thanks in advance,
best regards!
Click to expand...
Click to collapse
hello racabgd did you solve your problem ? a have the same problem
can you upload please your firmware to google drive an share it please
i have a black screen to my head unite
cimogt said:
hello racabgd did you solve your problem ? a have the same problem
can you upload please your firmware to google drive an share it please
i have a black screen to my head unite
Click to expand...
Click to collapse
No, problem is not solved, I've bought another one.
Does anyone have a latest android 10/11/12/13 download link or file for a - 2 gig ram - UIS8141e - sp7731e_1h10_native ?
cimogt said:
hello racabgd did you solve your problem ? a have the same problem
can you upload please your firmware to google drive an share it please
i have a black screen to my head unite
Click to expand...
Click to collapse
Did you solve this problem?
Regards,
teckynerd6249 said:
Does anyone have a latest android 10/11/12/13 download link or file for a - 2 gig ram - UIS8141e - sp7731e_1h10_native ?
Click to expand...
Click to collapse
i need too
tarik01 said:
i need too
Click to expand...
Click to collapse
im still looking and waiting im in same boat man
teckynerd6249 said:
im still looking and waiting im in same boat man
Click to expand...
Click to collapse
i have only a rom with fake android 12
tarik01 said:
i have only a rom with fake android 12
Click to expand...
Click to collapse
care to share file ?
teckynerd6249 said:
care to share file ?
Click to expand...
Click to collapse
853.08 MB file on MEGA
mega.nz
Hi Please, I need help !
I bought a T95Z PLUS Android 12 - Allwinner H618 - 4 GB/32 GB
Model Pixel 3
Version bigdroidOS 2.0.1
Amdrpod PS Build 12.1.A3
Every time I want to update from System Update I got a error:
Battery too low or in battery saving mode.
and I cant update.
How I can fix the problem ?
Thanks.
marcelopc said:
Hi Please, I need help !
I bought a T95Z PLUS Android 12 - Allwinner H618 - 4 GB/32 GB
Model Pixel 3
Version bigdroidOS 2.0.1
Amdrpod PS Build 12.1.A3
Every time I want to update from System Update I got a error:
Battery too low or in battery saving mode.
and I cant update.
How I can fix the problem ?
Thanks.
Click to expand...
Click to collapse
You're supposed to use the other update app. They put the error in to prevent updating from the wrong source, I believe. The one we're supposed to use is in the list of apps. Instead of in Settings.
perfectswanson said:
You're supposed to use the other update app. They put the error in to prevent updating from the wrong source, I believe. The one we're supposed to use is in the list of apps. Instead of in Settings.
Click to expand...
Click to collapse
Thanks !
marcelopc said:
Thanks !
Click to expand...
Click to collapse
There's a chance I could be mistaken I'll let you know if I get any roms or info from my seller on Amazon.
I just bought mine in Amazon.co.uk and my firmware is: 12.1.A4_20220923-1111
I have the same box and the status and navigation bars are missing! Anyone have any ideas to solve this? I have the latest firmware available for this box if anyone needs it. T95Zplus-H618-A5 and this one will work as well...X98HPRO_20220922-2218
You are in for a not so fun time with this box, IMHO. It's some adjusted version of tablet android 12 that is (seemingly) purposely crippled as far as permissions and user interface (as you noticed). It's pretending to be a Pixel 3.
I was unable to obtain permissions or even a proper interface after some time of trying. If anyone has tips as far as how to interact with this octagonal menace, please post them here. In exchange here is the specific ID of the board and a link to a picture i've just taken. It's obvious that Amazon has about a billion of these to sell, it'd be nice if we could optimize these little boards for something other than consumer control
Processor:
isocom memdnno32g z22040790***** mos05
With 4x (I've got the 4/32 gig version):
5*E77 d9pql
and Sticker:
t95zplus v5.0 aw869a 8d3
ycx20220826022 q9 q1
ID:
t95zplus-h618-**-**** ****
here's a pic of the board, just for fun:
Oranguman said:
You are in for a not so fun time with this box, IMHO. It's some adjusted version of tablet android 12 that is (seemingly) purposely crippled as far as permissions and user interface (as you noticed). It's pretending to be a Pixel 3.
I was unable to obtain permissions or even a proper interface after some time of trying. If anyone has tips as far as how to interact with this octagonal menace, please post them here. In exchange here is the specific ID of the board and a link to a picture i've just taken. It's obvious that Amazon has about a billion of these to sell, it'd be nice if we could optimize these little boards for something other than consumer control
Processor:
isocom memdnno32g z22040790***** mos05
With 4x (I've got the 4/32 gig version):
5*E77 d9pql
and Sticker:
t95zplus v5.0 aw869a 8d3
ycx20220826022 q9 q1
ID:
t95zplus-h618-**-**** ****
here's a pic of the board, just for fun:
Click to expand...
Click to collapse
Mine is working ok for now. Changed Launcher to SquareHome. There are a few settings missing, but for the price, I can't complain. I've learned how to flash firmware. The box came rooted which helps. Best boxes to buy are the AmLogic processors. They have more support available.
TheGhost1951 said:
I have the same box and the status and navigation bars are missing! Anyone have any ideas to solve this? I have the latest firmware available for this box if anyone needs it. T95Zplus-H618-A5 and this one will work as well...X98HPRO_20220922-2218
Click to expand...
Click to collapse
I'd love to get the firmware please... our one just isn't performing correctly.
glennss said:
I'd love to get the firmware please... our one just isn't performing correctly.
Click to expand...
Click to collapse
I will upload it in a little while. Do you know how to flash the firmware?
TheGhost1951 said:
I will upload it in a little while. Do you know how to flash the firmware?
Click to expand...
Click to collapse
Tired to use in inbuilt updated with a local image but no luck... also tried flashing from an sdcard using PheonixCard 3.09 but again no luck , could be the firmware i have.
Any tips gratefully received.
glennss said:
Tired to use in inbuilt updated with a local image but no luck... also tried flashing from an sdcard using PheonixCard 3.09 but again no luck , could be the firmware i have.
Any tips gratefully received.
Click to expand...
Click to collapse
Do you get errors?
TheGhost1951 said:
Do you get errors?
Click to expand...
Click to collapse
No , either black screen or just sits there saying "copying"
glennss said:
No , either black screen or just sits there saying "copying"
Click to expand...
Click to collapse
I either use Pheonix Suite with a USB A to A cable or unplug power from the box and insert the micro SD card created with Pheonix Card and then plug in power. I never have seen the words copying on the TV just a progress bar. Same the other way. Any how, getting ready to upload the latest firmware I have.
TheGhost1951 said:
I either use Pheonix Suite with a USB A to A cable or unplug power from the box and insert the micro SD card created with Pheonix Card and then plug in power. I never have seen the words copying on the TV just a progress bar. Same the other way. Any how, getting ready to upload the latest firmware I have.
Click to expand...
Click to collapse
Great ... its probably the firmware i have... was from some random site
Here you go,
Great... will try now and report back.... am i correct in setting the write mode to "Startup" in PheonixCard??
glennss said:
Great... will try now and report back.... am i correct in setting the write mode to "Startup" in PheonixCard??
Click to expand...
Click to collapse
I just load the image and then click or tap "burn", that's all and let it do it's thing.
Guides for future reference?
glennss said:
Great... will try now and report back.... am i correct in setting the write mode to "Startup" in PheonixCard??
Click to expand...
Click to collapse
I just load the image and then click or tap "burn", that's all and let it do it's thing