Seems like my Honor 3C H30-U10 is soft bricked and I am trying to get it back to life. I download Stock ROM for it with version B108 but it's in SP Flash Tool format. My phone isn't recognised by my laptop even though I have VCOM drivers installed.
I can install ROM to my phone if it's inside SD Card.
I need this file:
V100R001C900B108
Which is having dload and dload2 folders and having UPDATE.APP.
The file I am looking was previously hosted on Tiawan website but now removed:
www[dot]huaweidevice[dot]com[dot]tw/upload/file/20140507095345_27.rar
(mentioned here: myhonor3c[dot]blogspot[dot]com/2014/07/restore-bricked-honor-3c_10.html )
Please upload it if you have it in your local drive.
Related
The Huawei Firmware Finder app indicates that there is an OTA update for the Tab (BTV-DL09C100B009). It is 424 MB. I could download it but I don't know how to install it. The zip contains several .dat files and two folders besides the 'UPDATE.APP' file.
Meanwhile the Tab's own HiCare app cannot find any update.
My version number is still BTV-DL09C100B006.
Some help would be appreciated.
Just follow the steps of Firmware finder
1. ckick rom
2. click download
3.click chek MD5
4. click move to DLOAD
5. tunoff device
6. Press ALTOGETHER : Vol UP + Vol DOWN + POWER
wait a few seconds and MUI screen apears to install Firmware
Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.
ctibor said:
Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.
Click to expand...
Click to collapse
You can try to unpacked update after point 3 and before point 4 that SJGSM wrote!
Let's me if it's ok now!
ctibor said:
Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.
Click to expand...
Click to collapse
YES sorry I missed Step 4.
You have 5 steps in Firmware Finder:
1. CHANGELOG
2. DOWNLOAD
3. CHECK MD5
4. UNPACK UPDATE
5. MOVE TO DLOAD
Any way it is always better to Install FULL FIRMWARE Rather than Incremental UPDATE, It only takes a few minutes longer but you have a FULL FIRMWARE UPDATE with all your data saved.
You can also use Firmware Finder for Windows and donwload your firmware, then you just have to copy the UNPACKED File UPDATE.APP to the: ( dload ) folder in your External SD
ctibor said:
The Huawei Firmware Finder app indicates that there is an OTA update for the Tab (BTV-DL09C100B009). It is 424 MB. I could download it but I don't know how to install it. The zip contains several .dat files and two folders besides the 'UPDATE.APP' file.
Meanwhile the Tab's own HiCare app cannot find any update.
My version number is still BTV-DL09C100B006.
Some help would be appreciated.
Click to expand...
Click to collapse
If you have already UNZIPPED the download file, Just copy ALL the UNZIPPED files to an dload Folder in your Externalñ SD. If you dont have one Just create a New Folder in your ExtSD and RENAME it : dload
Then Power OFF and press: (Vol Up +Vol DOWN + POWER ) and the system will recognize the UPDATE.APP file in the MUI screen
SJGSM said:
If you have already UNZIPPED the download file, Just copy ALL the UNZIPPED files to an dload Folder in your Externalñ SD. If you dont have one Just create a New Folder in your ExtSD and RENAME it : dload
Then Power OFF and press: (Vol Up +Vol DOWN + POWER ) and the system will recognize the UPDATE.APP file in the MUI screen
Click to expand...
Click to collapse
I did exactly the same what you wrote. And I flashed the update with the method you suggested. Everything went smoothly - seemingly.
(I am not totally noob, this is the fifth Huawei device I've been handling. My current phone is Huawei P9 Plus and I've put on all the new ROM versions 'by hand' becauce OTA did not come.)
But something was wrong because
a) the update process went through too fast, just a couple of seconds from 0 to 100%.
b) the version number has not changed. I still have BTV-DL09C100B006,
c) the dload folder and the whole extracted package in it were not deleted after the process, remained on the SD card.
So I suspect that only the UPDATE.APP was installed, the rest of the package not. The M3 now keeps working normally but unfortunately there is one problem: the tab lost its 4G (LTE) capability after the update, now the phone radio works only in 3G and/or GSM mode.
You are right, a full ROM flashing is always better, more secure but there is NO full ROM available for this Tab! I've searched the whole net and found only OTAs for the M3. I'd like to get back the normal functionality because I bought the device exactly to have quick access to the internet everywhere.
So I don't know what to do. If you or somebody else could find a full ROM for the device I'd be very grateful!
Problem solved!
Problem solved!
Earlier I tried to update the M3 with HiSuite but there was no package available at that time. Now, after my unsuccessful manual update, I connected the Tab to my notebook again and ran HiSuite. And voilá: now it offered the B009 update.
The install went without problem and now I have BTV-DL09C100B009. The LTE data capability came back, and everything works well so far.
Anyway, thanks to those who tried to help!
I have downloaded a firmware file from firmware finder but I didn't see anywhere how to check MD5. The file unzipped OK but I don't want to install until I check MD5. Where is the MD5 information for each download firmware?
---------- Post added at 01:46 PM ---------- Previous post was at 01:44 PM ----------
I have downloaded a firmware file from firmware finder but I didn't see anywhere how to check MD5. The file unzipped OK but I don't want to install until I check MD5. Where is the MD5 information for each download firmware?
SJGSM said:
YES sorry I missed Step 4.
You have 5 steps in Firmware Finder:
1. CHANGELOG
2. DOWNLOAD
3. CHECK MD5
4. UNPACK UPDATE
5. MOVE TO DLOAD
Any way it is always better to Install FULL FIRMWARE Rather than Incremental UPDATE, It only takes a few minutes longer but you have a FULL FIRMWARE UPDATE with all your data saved.
You can also use Firmware Finder for Windows and donwload your firmware, then you just have to copy the UNPACKED File UPDATE.APP to the: ( dload ) folder in your External SD
Click to expand...
Click to collapse
I found a site with a tutorial on how to install Android 7.0 on P9 lite.On version VNS-L31C636B361 there are 3 files, and acording to them, you need to follow these steps:
Extract the contents of the zip files you downloaded from above.
Create a folder named “dload” in the root directory of your device’s SDcard.
Copy all the extracted contents of the zips into the dload folder.
Open the dialer app and dial *#*# 2846579#*# *
Select Project Menu > Software upgrade > SDcard upgrade > confirm the installation.
The firmware will begin installing and once that is done your device will reboot automatically.
But the problem is, if I extract all the contents from all 3 files, some of them have the same name and overwrite, and when I try to install by *#*# 2846579#*# *, it stops after 5% and gives me fail error.
What is the correct way to install and why are there 3 separate files ? (also, do I need to have some settings ? the phone should be connected to PC while installing ? )
Thank you very much!
What model you have?
Seems you have another oeminfo...
i have the same problem, it runs now on version vns-l31c432b161, if a want to install android 7 i get the same message as above
gtdaniel said:
What model you have?
Seems you have another oeminfo...
Click to expand...
Click to collapse
the omeinfo is 100% the same, otherwise if would have said its not compatible.The problem is there are 3 different files for this model to download, and if u extract them in the same folder, they overwrite ? What is the correct way to install them ?
erader said:
the omeinfo is 100% the same, otherwise if would have said its not compatible.The problem is there are 3 different files for this model to download, and if u extract them in the same folder, they overwrite ? What is the correct way to install them ?
Click to expand...
Click to collapse
EDIT: i tried again and it stucks on 5%, doesnt say anything.
Good to know!
If you are in MM 6.0 you can not go to Nougat 7.0 without some preparation until Huawei release official version.
I you are already in Nougat 7.0 (B3xx) you can go to B360-B361, directly with Sdcard upgrade or with three keys pressed method.
U dint answer my question though.Let me be more clear.
Here is a tutorial on how to install Android 7.0 on P9 Lite: http://www.droidviews.com/update-huawei-p9-lite-manually-official-android-7-0-nougat-emui-5-0/
On my model, there are 3 files:
4. VNS-L31C636B361
update.zip
update_data_full_VNS-L31_B360_hw_meafnaf.zip
update_data_full_VNS-L31_B361_hw_meafnaf.zip
and they say
Extract the contents of the zip files you downloaded from above.
Create a folder named “dload” in the root directory of your device’s SDcard.
Copy all the extracted contents of the zips into the dload folder.
But some of the files from these 3 .zips have the same name, and when I copy them in the same folder, they overwrite.
Is that tutorial sh1t ?
Hi, Everyone, If anyone wants to download the official firmware for Honor 5C NEM-L22 Variant , Here is the guide and download link :
B301 Indian Nougat FIrmware : Click Here
B310 Indian Nougat Firnware : Click Here
B351 Asia Nougat Firmware Click Here
Delete this if someone already provided the link. Also feel free to contact me.
Full Guide :
Note:
This Update is only for Honor 5C users.
This ROM is an experimental release, It may contain Bugs.
I'm not responsible for any damage to your phone while installing this Update.
Make sure that you have latest USB drivers installed
Take complete backup of your phone and then proceed.
Method 1
First of all, Download the Stock ROM from above link and move it to your SD Card/Internal memory
Now Extract the Downloaded ROM ZIP file on your SD Card
Look for the folder called "dload" in your SD Card root. if you don't have Create a folder called dload in the root directory and move the update.app file in dload folder.
In your phone, dial *#*#2846579#*#* from phone dialer to open the hidden menu.
Navigate the option Project Menu --> Software Upgrade --> SDCard.
Now select the update.app and Run update.
Wait untill the installation process completes.
Once the installation process is completed, you can reboot your Honor 5C
That's it ! You have Installed the latest version of B350 build on Honor 5C.
Method 2
Download the Stock ROM from above
Extract the Downloaded ZIP file
Create a folder called dload in the root directory and move the update.App file in dload folder.
Navigate to the phone Settings -–>Update and Click on the menu button.
Press “Volume Up + Volume Down and Power Button” simultaneously. The Update installation starts automatically.
Wait until update installation completes.
Done
NEM-L22
Hey how about for B150 ?
will this work in nem- l21c432b132
Not work to firmware finder NEM-L22C675B301 to NEM-L22C675B310
NEM-L22
Hi, can I flash Asian frimware on NEM-L22 B330 Indian frimware.
Does it cause any problems to my phone .
Pls tell me.
I have a hard brick huawei p8 lite, need someone who have a fonctionnal P8 lite to create a debrick.img the method is simple :
1) download the file from the link Debrick.zip
2) flash it via TWRP.
3) You will find a file called debrick.img in you sd card.
4) Upload this to your preferred file host.
this will help many people, Sorry for my bad English.
[Original thread]
Mehdi008 said:
I have a hard brick huawei p8 lite, need someone who have a fonctionnal P8 lite to create a debrick.img the method is simple :
1) download the file from the link Debrick.zip
2) flash it via TWRP.
3) You will find a file called debrick.img in you sd card.
4) Upload this to your preferred file host.
this will help many people, Sorry for my bad English.
[Original thread]
Click to expand...
Click to collapse
That is for Samsung Qualcomm devices, not apply to P8 Lite.
How kind of brick you have? What have you done?
.
I have flashed rom from honor 4c with TWRP, and my phone not showing anything just black screen ( no fastboot, no recovery) just blinking the led with green and red color, i need someone to create the dump file unbrick.img to try to boot from sd card.
Can someone help me downgrade my Huawei to it's stock version? I'm doing it to unlock the bootloader and flash roms safely or at least in a safe way....
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
santalimi said:
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
Click to expand...
Click to collapse
Huge thanks mate!
This is why I love XDA
santalimi said:
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
Click to expand...
Click to collapse
BTW will it wipe my Internal Storage??
actually i dont remember
santalimi said:
actually i dont remember
Click to expand...
Click to collapse
Thanks anyway!
Maybe tomorrow or something I'll try it
Info
@santalimi can I follow the procedure without having the bootloader unlocked?
Can somebody give a link where I will be able to download stock boot.img?
here is safe downgrade method, Huawei P Smart FIG-LX1 9.1.0.130(C02E8R1P5 Downgrade Problem [SOLVED]
...:::::NP™:::::... said:
here is safe downgrade method, Huawei P Smart FIG-LX1 9.1.0.130(C02E8R1P5 Downgrade Problem [SOLVED]
Click to expand...
Click to collapse
Hello. Is that too available for free (ressurrector tool)? Is it free? Is it possible to use it to flash a custom recovery on a locked phone? Thanks
santalimi said:
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
Click to expand...
Click to collapse
Didint work for me, tried few SD cards, gazilion different firmwares and 2 bricked phones to revive. Always getting "Update failed" error.
I've succesfully unbricked my phones this way:
1)Download your firmware (region code must match! mine was C432)
2)Unpack your firmware, you'll get new folder with your firmware inside (eg. Huawei P Smart FIG-LX1 Fig-L31 hw eu HLRCF Figo-L31 9.1.0.115(C432E5R1P3T8) Firmware 9.0.0 r3 EMUI9.0.1 05014XMW [androidhost.ru])
3)Format Your SD card (i've used NTFS file system)
4)Open your firmware directory, go to \Software and there you'll find a "dload" folder
5)Copy dload folder to your SD card
6)insert card to your phone, push vol+ vol- and pwrbtn for 10 seconds, relase buttons when huawei logo appears.
Your update will process automatically, it will take a few minutes.
Voila!
Hi, I know that this is an old thread. But I tried t34v2's method, and it kind of worked, it updated the recovery(it looks completely different) but it still will not boot. Is there anything else I could try ?
Thank you for any help.