Hi guys,
so I own a non rooted Galaxy S7 edge (exynos) and I am trying to change it's CSC.
Prehistory:
I live in Bulgaria and bought it (back in 2016) from one of the carriers here - Telenor, so naturally it had a Telenor branded firmware (CSC GBL I think). I immediately downloaded the unbranded firmware for Bulgaria (CSC BGL) from Sammobile and flashed it. Phone started in Polish, but didn't have any extra apps or uncotabilities, so I left ti this way.
The problem:
With the new versions of Android the Polish CSC, which the MULTI-CSC for Bulgaria defaults to started having some apps (like samsung pay) that just crash when opened and started having some menus in the settings (like T mobile roaming) which just crash the settings app when clicked. I tried downloading several ROMs (The first Andorid 8.0 and several older Android 7.0) in an attempt to make the phone switch to BGL SCS, but unfortunately whatever I do it just defaults on the Polish one. I tried wiping the cache and factory reset after flash, tried having a Bulgarian SIM card inserted both during flash, cache wipe & reset, and startup, but I cannot change the CSC to BGL.
Notes:
1. Flashing Android 8.0 caused the bootloader to be updated to U2, so I cant flash firmwares with bootloader of U1, unless I flash them without the their bootloader, but this doesn't work everytime (I think)
2. I haven't rooted my phone yet and prefer not to. If I absolutely must I ask for a guide on how to do it without triggering Knox & with option to unroot it after in such a way that it is like it has never been rooted.
3. The Dialer codes for IMEI and CSC change no longer work. I only managed to make the IMEI one ( *#06#) work using a firmware from 07.2017 (flashed without its bootloader), but the one for changing CSC (*#272*<IMEI>#) doesn't work on it.
I'm stuck guys I don't know what else to do. I only want the phone to have a BGL CSC and to receive OTA updates. No root, no nothing.
Thank you for your time.
P.S. I searched the forums all day, but couldn't find a solution
Do you know when oreo to s7 edge with CSC SEE users?
Sent from my H2 using Tapatalk
sharcevic said:
Do you know when oreo to s7 edge with CSC SEE users?
Sent from my H2 using Tapatalk
Click to expand...
Click to collapse
I' not sure if I understand that? Are you asking me if I know when Oreo comes out with CSC SEE?
yeah, that's what I'm interested in
stunito0o0 said:
I' not sure if I understand that? Are you asking me if I know when Oreo comes out with CSC SEE?
Click to expand...
Click to collapse
Sent from my SM-G935F using Tapatalk
stunito0o0 said:
Hi guys,
so I own a non rooted Galaxy S7 edge (exynos) and I am trying to change it's CSC.
Prehistory:
I live in Bulgaria and bought it (back in 2016) from one of the carriers here - Telenor, so naturally it had a Telenor branded firmware (CSC GBL I think). I immediately downloaded the unbranded firmware for Bulgaria (CSC BGL) from Sammobile and flashed it. Phone started in Polish, but didn't have any extra apps or uncotabilities, so I left ti this way.
The problem:
With the new versions of Android the Polish CSC, which the MULTI-CSC for Bulgaria defaults to started having some apps (like samsung pay) that just crash when opened and started having some menus in the settings (like T mobile roaming) which just crash the settings app when clicked. I tried downloading several ROMs (The first Andorid 8.0 and several older Android 7.0) in an attempt to make the phone switch to BGL SCS, but unfortunately whatever I do it just defaults on the Polish one. I tried wiping the cache and factory reset after flash, tried having a Bulgarian SIM card inserted both during flash, cache wipe & reset, and startup, but I cannot change the CSC to BGL.
Notes:
1. Flashing Android 8.0 caused the bootloader to be updated to U2, so I cant flash firmwares with bootloader of U1, unless I flash them without the their bootloader, but this doesn't work everytime (I think)
2. I haven't rooted my phone yet and prefer not to. If I absolutely must I ask for a guide on how to do it without triggering Knox & with option to unroot it after in such a way that it is like it has never been rooted.
3. The Dialer codes for IMEI and CSC change no longer work. I only managed to make the IMEI one ( *#06#) work using a firmware from 07.2017 (flashed without its bootloader), but the one for changing CSC (*#272*<IMEI>#) doesn't work on it.
I'm stuck guys I don't know what else to do. I only want the phone to have a BGL CSC and to receive OTA updates. No root, no nothing.
Thank you for your time.
P.S. I searched the forums all day, but couldn't find a solution
Click to expand...
Click to collapse
Morning,
I hope you have found a solution to this already. If not.. You need to download a combination file which is the same version as the main firmware you have. eg. XXU2 firmware requires a XXU2 combination file.
Flash the combination file. When the device is rebooted in to factory binary perform a factory reset. now flash the "home csc" file from your main firmware pack. when the handset is powered on again open up the factory imei shortcut/app, this has a keypad type *#243203855# this will bring up the csc codes for your multi-region firmware. select the one you require and the handset will reboot. now just flash your main firmware and it will be the CSC you need.
Related
I have a Note 3 SM-N9005. There was a polish release of 4.4.2 firmware, which I'm fairly certain was this, which I installed in January using this guide on XDA.
Today I discovered that my carrier (Telstra, Australia) had released an official 4.4.2 firmware N9005XXUENE3, and thought I would flash it. The flash failed and I got the message "Firmware upgrade encountered an issue" in recovery. In a panic, I tried to return to the polish firmware. Having lost what I'd originally flashed, I tried N9005XXUENA6 from sammobile first. This got me to the setup screen, but the phone would crash on the first or second page of setup with "Unfortunately Samsung Setup Wizard has stopped". I then downloaded the N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX from the first link. This has the same result.
After each flash I did a factory reset and wiped the cache (not dalvik, because I'm not rooted). The stock firmware comes just in the form of a .tar.md5 as did the N9005XXUENA6 from sammobile, but the final polish firmware and the original I had installed had separate parts for bl, ap, cp, csc.
Is this what it means to be soft-bricked?
What was the mistake that I made to result in a soft brick?
What can I do to have a functional phone again, either with stock firmware or anything at all?
Given that my knox is still 0x0, is it likely my warranty is void anyway, and can I repair this somehow?
Go to SAMMOBILE and download the latest Polish or Slovakian rom using the europpean pit. My N9005 is polish too, and yesterday I had the same problem, thinking that since I am bulgarian , the bulgarian rom should work.
So install the Polish or Slovakian (see down) and it should work...
+ this pit: http://forum.xda-developers.com/attachment.php?attachmentid=2427062&d=1385931899
SM-N9005
Poland (T-mobile)
2014 October
4.4.2
N9005XXUGNI4
N9005TPLGNI1
or
SM-N9005
Slovakia
2014 October
4.4.2
N9005XXUGNI4
N9005TMSGNI1
Alexander_Q said:
I have a Note 3 SM-N9005. There was a polish release of 4.4.2 firmware, which I'm fairly certain was this, which I installed in January using this guide on XDA.
Today I discovered that my carrier (Telstra, Australia) had released an official 4.4.2 firmware N9005XXUENE3, and thought I would flash it. The flash failed and I got the message "Firmware upgrade encountered an issue" in recovery. In a panic, I tried to return to the polish firmware. Having lost what I'd originally flashed, I tried N9005XXUENA6 from sammobile first. This got me to the setup screen, but the phone would crash on the first or second page of setup with "Unfortunately Samsung Setup Wizard has stopped". I then downloaded the N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX from the first link. This has the same result.
After each flash I did a factory reset and wiped the cache (not dalvik, because I'm not rooted). The stock firmware comes just in the form of a .tar.md5 as did the N9005XXUENA6 from sammobile, but the final polish firmware and the original I had installed had separate parts for bl, ap, cp, csc.
Is this what it means to be soft-bricked?
What was the mistake that I made to result in a soft brick?
What can I do to have a functional phone again, either with stock firmware or anything at all?
Given that my knox is still 0x0, is it likely my warranty is void anyway, and can I repair this somehow?
Click to expand...
Click to collapse
My note 3 is not actually polish. I used the polish firmware because it was the first to offer 4.4.2. Does this suggestion still apply?
Alexander_Q said:
My note 3 is not actually polish. I used the polish firmware because it was the first to offer 4.4.2. Does this suggestion still apply?
Click to expand...
Click to collapse
I'm not sure... do you know your original configuration, before this 4 file polish rom?
Still you need to try and flash, one thing is sure, you can't flash an older one. So if your phone is not locked to any operator than any latest stock rom from your region should work. If you're not sure which region is your phone originally from, then there's a problem....
So go to sammobile, type n9005 in the firmware tab, and try the ones at top,October...November, from your region. And use the pit file too.
The latest for my region and carrier is N9005XXUENE3, which is what got me into trouble in the first place in my OP. What should I try next?
Update: Got past setup and into homescreen. Usually crashes after about 10 minutes, but sometimes I can get up to a few hours. Doesn't detect the SIM card, and camera doesn't work. Any clue what might be going on?
Alexander_Q said:
Update: Got past setup and into homescreen. Usually crashes after about 10 minutes, but sometimes I can get up to a few hours. Doesn't detect the SIM card, and camera doesn't work. Any clue what might be going on?
Click to expand...
Click to collapse
http://www.sammobile.com/forum/showthread.php?t=20032
do this above
load your rom in the AP
load the pit File
use odin 3.0.9
good luck
I did the same and it worked
Hi, I have SM-910H with ACR CSC. I have tried flashing multiple Stock Roms but CSC does not changes. I have factory reset multiple times. Also I have tried below mentioned method multiple times but no avail. If anyone has been successfully change CSC on 910H without root, kindly help me out.
1. Run and configure Odin. Do NOT check “Re-Partition” and “Auto Reboot” check boxes.
2. Load the stock firmware in the PDA button.
3. Set the phone in download mode (Volume Down+Home+Power button). Then connect the phone in your computer.
4. Hit the “Start” button and then wait.
5. Once the flashing successfully completed. Do NOT let it reboot into the normal mode.
6. Reboot into recovery mode (Volume Up+Home+Power button).
7. See if it’s applying the CSC file then wait until it finishes and reboot.
8. If you do not see the CSC installation, instead choose the “Wipe data/Factory reset”. Then repeat flashing the stock firmware. You may then achieved the CSC code flashing the stock firmware on the second attempt.
10. Confirm the CSC code by using Kies 3 or by downloading Phone INFO ★Samsung★ and see if the CSC code has changed.
Click to expand...
Click to collapse
Is there any developer or Samsung expert, who can highlight what might be the problem here.
tipu2185 said:
Is there any developer or Samsung expert, who can highlight what might be the problem here.
Click to expand...
Click to collapse
Find & flash single country csc instead of multi csc, once it's changed to single country csc, flash again as per your requirements.
jdomadia said:
Find & flash single country csc instead of multi csc, once it's changed to single country csc, flash again as per your requirements.
Click to expand...
Click to collapse
Thanks for the advice. I can try that. Can you point out any 910H firmware that is single CSC. Also can you tell how to check from downloaded firmware that it is whether single CSC or multi CSC.
I used to flash Singapore rom when I was facing problem like u r facing but i don't know about your model, there was a thread in note 3 forum mentioning this.
Note 3 thread for csc
http://forum.xda-developers.com/showthread.php?t=2666907
i don't mean to hijack the thread but i am on the same boat with n910f (not rooted).
I have a warranty appointment (battery drain) and wish to flash back to stock. I purchased my phone sim free from Switzerland and i am in the UK. however i tried lollipop German rom (and sadly did not record my csc, i am a noob) and have now downgraded to UK rom to test battery drain issue for a day or two. I now wish to revert back to stock. my phone id csc related fields are as below.
original csc code: BTU
firmware csc: AUT
active csc code: BTU / AUT
csc country iso: CH
which rom should i flash to and back. Also considering the german lollipop rom data has completely gone from the csc which i flashed to the UK rom afterwards will it be safe to flash to it without auto reboot and then flash back to AUT swiss rom. i'd rather not have to set up my device again . and any comments on Warranty things / recommendations i need to take care of before my appointment
thnx
*********my solution ---------
I reset to factory default , installed lollipop rom, reset to factory default, booted lollipop, reset to factory default again, flashed swiss image , reset to factory default and everything was back to stock
Any suggestions as to how to get my UK vodafone contract I9505 back to its correct CSC ??
Back in the mists of time (JB or KK) I flashed a ROM which flipped my CSC from VOD to Switzerland (AUT). Now I've tried applying I9505XXUHOB8_I9505VFRHOC1_VOD.ZIP to get back to Vodafone UK's CSC and the bloody phone thinks it's Spanish (ATL) !!
This is driving me bananas! I've tried reflashing, clearing the cache and doing factory reset before and afterwards, I've tried reflashing it twice with a factory reset from android and that hasn't worked either. There's so much crap out there on what should fix the problem but I can't find anything that actually works.
Phone is currently "offical" status and has knox 0x0 and I'd like to keep it that way, but I really want to get the CSC situation resolved so I can take a stab at getting the vodafone wallet/NFC support working. I need to stay away from rooting it as I use the phone for banking
Please help!
WARNING: The following procedure will result in the S4 being factory reset. Backup all data beforehand.
Dial *#272*IMEI#. A screen will appear with the list of available CSC codes. Select one and reboot. The other option is to use CSC Changer from the Play Store.
Strephon Alkhalikoi said:
WARNING: The following procedure will result in the S4 being factory reset. Backup all data beforehand.
Dial *#272*IMEI#. A screen will appear with the list of available CSC codes. Select one and reboot. The other option is to use CSC Changer from the Play Store.
Click to expand...
Click to collapse
*#272 doesn't work any more.
In the end I went down the root/csc change app path.
Downgraded to I9505XXUGNJ5_I9505VFRGNK1_VOD 4.4.2, then used towelroot & Mr Wolf's instructions to get root for NJ5. Now I was able to use (I think) csc selector to flip the CSC over to VOD. Finally I reflashed and factory reset I9505XXUHOB8_I9505VFRHOC1_VOD again and am now on lollipop with the correct CSC
And most surprisingly I'm still knox 0x0 !! It was showing custom status whilst it was rooted, but is now back to official.
Last step was to bung geohot a tenner for writing towelroot and making this possible
Hi,
Tried to flash firmware to get rid of vodafone csc from my new s8 but csc keep staying VOD i want it BTU ideally.
Has anyone tried it yet and done it?
Need some advice
Need to flash then wipe for it to take.
Thanks for advice can you specify do you mean flash and then in recovery wipe cache and wipe data?
Anyone can help please?
Ok what he means is once flashed btu go into recovery not sure what 3 buttons to press but Google it.
Once in there wipe cache and reformat phone once more then it should change VOD to BTU that's what I did when I had my vodafone s7 and changed it to btu
It doesn't work stays VOD no matter what i do
Ok so you flashed BTU what files did you use?
Dial *#243203855#
mimo2008 said:
Ok so you flashed BTU what files did you use?
Click to expand...
Click to collapse
Hi,
Used firmware from sammobile AP BL CP CSC_OXM
peachpuff said:
Dial *#243203855#
Click to expand...
Click to collapse
Says invalid ussd code
Hi my suggestion would be 're flash the latest firmware again once installed then boot phone into recovery mode then wipe cache then format and reboot phone again one last time.
hi
i have samsung j7008 model it any problem and have now my device are boot loop (powen on appear smart service and update) so i use kises and update but time is very longer i can't wait it's time and i use odin and flash same prob… but i have emergency recovery code.so please help me solve?please i really trouble and i think crom service lock because i see it ?
paingyatitun123 said:
hi
i have samsung j7008 model it any problem and have now my device are boot loop (powen on appear smart service and update) so i use kises and update but time is very longer i can't wait it's time and i use odin and flash same prob… but i have emergency recovery code.so please help me solve?please i really trouble and i think crom service lock because i see it ?
Click to expand...
Click to collapse
I'm sorry this is for s8 if you goto SamMobile forum post in there greenman may be able to help more but to me sounds like you need to 're flash original firmware.
mimo2008 said:
Hi my suggestion would be 're flash the latest firmware again once installed then boot phone into recovery mode then wipe cache then format and reboot phone again one last time.
Click to expand...
Click to collapse
Unfortunately still VOD
qucharski said:
Unfortunately still VOD
Click to expand...
Click to collapse
Ok if you go to SamMobile forum and put a post there greenman maybe able to help you.
Sorry i couldn't give anymore I'm kinda stuck as well.
mimo2008 said:
Ok if you go to SamMobile forum and put a post there greenman maybe able to help you.
Sorry i couldn't give anymore I'm kinda stuck as well.
Click to expand...
Click to collapse
Ok just did just need to wait
qucharski said:
Hi,
Tried to flash firmware to get rid of vodafone csc from my new s8 but csc keep staying VOD i want it BTU ideally.
Has anyone tried it yet and done it?
Need some advice
Click to expand...
Click to collapse
This shouldn't be a problem so let me help. First some questions...
1. From which carrier/country is your phone?
2. Does it have a network lock?
3. Is it the Model number SM-G950F?
4. Which files did you flash via Odin (please type the actual filenames) and with which settings in Odin?
5. If you go into Settings - About phone - Software information - Service provider software. Please tell me the first and third line there under this point.
maik005 said:
This shouldn't be a problem so let me help. First some questions...
1. From which carrier/country is your phone?
2. Does it have a network lock?
3. Is it the Model number SM-G950F?
4. Which files did you flash via Odin (please type the actual filenames) and with which settings in Odin?
5. If you go into Settings - About phone - Software information - Service provider software. Please tell me the first and third line there under this point.
Click to expand...
Click to collapse
Hi,
1. Bought from Vodafone UK
2. Removed lock by code
3 G950F
4 Sorry don't have access to my laptop now but I've
Downloaded latest btu software from sammobile
unpacked it and used as per instructions. Tried using either home_csc or the other one but no luck either
Settings tried just standard and tried pit and reformat didn't work either
5. SAOMC_SM-G950F-OXM_XEU_077
XEU/XEU/VOD
when go into recovery it's still VOD tho
You have done all you could do.
You needed to flash with normal CSC NOT with HOME_CSC to change the CSC.
Your new CSC is XEU!
It still shows XEU/XEU/VOD because VOD is the original CSC of your phone. This is new for the S8 and could not be changed! But normally you will get OTA updates for your new XEU CSC just fine! And any Vodafone-Apps should also be removed.
So everything is like on Samsung devices debranded bevore - beside that the factory CSC is hard branded inside the phone. But thats just optical. Everything else works like it is an XEU CSC.
maik005 said:
You have done all you could do.
You needed to flash with normal CSC NOT with HOME_CSC to change the CSC.
Your new CSC is XEU!
It still shows XEU/XEU/VOD because VOD is the original CSC of your phone. This is new for the S8 and could not be changed! But normally you will get OTA updates for your new XEU CSC just fine! And any Vodafone-Apps should also be removed.
So everything is like on Samsung devices debranded bevore - beside that the factory CSC is hard branded inside the phone. But thats just optical. Everything else works like it is an XEU CSC.
Click to expand...
Click to collapse
Are you sure about that? In the past if you didnt change properly the CSC after unbranding your phone you werent getting OTA updates anymore, i've read on SamMobile you gotta use Smart Switch using the serial number of a phone you know has that CSC, but i dont know how to find one, no one answered me on here. I'm thinking of going into a store and look at the exhibition one, but im afraid it's not legal to do that.
I have a an italian no brand s8 ITV, i want to change in XEU ( uk and ireland) to get update fast more than my country
I flashed all 4 files in odin and then hard reset but nothing changed.. from AQF7 ITV to AQF7 XEU ( try with this to see if i get new update come out in this days) but nothing remain in Phone info and in setting ITV/ITV/ITV nothing change
Is possible without root make this or i wrong something? Thank guys
Did you wipe data / cache after flashing the firmware? I'm assuming that you may have done as you mention a hard reset.
mmotti said:
Did you wipe data / cache after flashing the firmware? I'm assuming that you may have done as you mention a hard reset.
Click to expand...
Click to collapse
yes i do a factory reset wipe cache in recovery.. but nothing to do nothing change
Flash self with odin you first guy
Ok ITV is part of the same csc as XEU so all you need to do is flash the 4 files but when flashing use the home csc file not the other one and then see what happens.
i try see what happens, i remove sim card too
mimo2008 said:
Ok ITV is part of the same csc as XEU so all you need to do is flash the 4 files but when flashing use the home csc file not the other one and then see what happens.
Click to expand...
Click to collapse
Nothing with home csc nothing change.. always ITV ITV ITV
Flash, boot set wifi ecc then reboot in recovery ( first say no command all time i tried but 3sec appear recovery) wipe everything, but nothing change
Strange one that. But just thinking because ITV and XEU are part of the csc family you should get OTA pretty much the same time. I just recently updated mine to latest update by connecting my phone to my laptop and then smart switch.
You have to use a UK Sim card and make a reset with it