Database Users

[Guide] Samsung Galaxy J700P root w/ TWRP

TWRP Link: https://dl.twrp.me/j7ltespr/
Phh's SuperUser: http://forum.xda-developers.com/android/software-hacking/wip-selinux-capable-superuser-t3216394
Odin: http://odindownload.com/ (DOWNLOAD 3.0.9)
After you download TWRP, install Odin. Then follow the steps below.
1. Launch Odin
2. Put your J7 into download mode (hold volDown + power + home during boot)
3. Using your charger cord, plug your J7 into your PC while it's in download mode; make sure Odin is open.
4. In Odin, press the 'AP' button, and select the TWRP .tar you downloaded. (DO NOT CHANGE ANY OTHER SETTINGS.)
5. Verify that the checkbox by 'AP' is selected, then click the 'Start' button.
6. Once that's finished, your phone will reboot. Press volUp + power + home before you see the boot screen to verify that TWRP is installed. Reboot to system afterward.
7. On your J7, go to the SuperUser download link, and download it.
8. Once phh's SuperUser is downloaded, reboot and get into TWRP. (Press volUp + power + home before you see the boot screen)
9. When you get into TWRP, press the 'Install' button. Go to the directory where you downloaded the SuperUser .img, and select it.
10. Once you select it, it will ask you to swipe to install it. Go ahead and do that, and phh's SuperUser should be installed. (be sure to go to the play store and get his app to actually complete installation.)
11. When you reboot, you should be rooted!
Thanks to @CoffeeNAndroid for pointing out this method of rooting.

Thanks for the guide. I find that no matter if you flash cf auto root or twrp to root youre going to have to reflash that stock recovery... it makes since to root with twrp cause you can flash all the zips you want and backup youre rom all in one trip before you reflash the stock recovery... i can understand some people are like well i want a permanent twrp recovery without having to have to keep using odin to flash the twrp and stock recovery but this is what is available right now at this time...

Can you post the stock recovery.img for me please j700p.

http://forum.xda-developers.com/galaxy-j7/development/samsung-stock-recovery-700p-read-t3454061
just made one that works... swap back and forth to fix issues from time to time
We need to fix the TWRP issue

thank you.
orginally rooted with cf-autoroot which rooted it fine, but caused a boot loop. so i followed your guide, and voila, installed twrp and supersu, zero issues. thanks brother.
phrost.​

Can anyone help me with this? I don't know why I always have an issue, using a J7, I did the following :
Open odin 3.12
put phone in DL mode
connect phone and says "added"
click AP and select the .tar file, check box is checked
click start and get this
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help this is damning how I seem to have an issue every time I try and do this....

no one?

Damani311 said:
Can anyone help me with this? I don't know why I always have an issue, using a J7, I did the following :
Open odin 3.12
put phone in DL mode
connect phone and says "added"
click AP and select the .tar file, check box is checked
click start and get this
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help this is damning how I seem to have an issue every time I try and do this....
Click to expand...
Click to collapse
Did you enabled the oem unlock

Will this work for Boost Mobil J700P with new recent update?

iram said:
Will this work for Boost Mobil J700P with new recent update?
Click to expand...
Click to collapse
Yes it should work i think

I need a root process without pc

Kibathefeng said:
I need a root process without pc
Click to expand...
Click to collapse
No way to root this model without pc

phones rooted so it says, supersu cant get rid of knox driving me nuts j700p marshmellow

I have a J700p under Boost Mobile. I already have it rooted and I have BusyBox. Does this change anything? Is there something different that I have to do since it's already rooted? And can I backup my stuff to my computer?

Virgin mobile galaxy J700P
adhdluke said:
I have a J700p under Boost Mobile. I already have it rooted and I have BusyBox. Does this change anything? Is there something different that I have to do since it's already rooted? And can I backup my stuff to my computer?
Click to expand...
Click to collapse
If you installed twrp recovery you can make a backup an flash other roms an copy the backup to your PC if you want ! Use the latest twrp an flash it using odin if you havent already !

Help
nothing is working for me loosing my mind...

Help special case to flash stock rom in s7 edge 935a

Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it

Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Remove PIT file and try again.
From Edge of Galaxy Seven

Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Not knowing WHAT you are flashing, makes it a little harder to determine what is going wrong.
Go HERE and flash this in Download Mode. This is the latest Stock 935A ROM, This will wipe Everything on the device, and it'll be like it came brand new

norbarb said:
Remove PIT file and try again.
From Edge of Galaxy Seven
Click to expand...
Click to collapse
which is the pit file, sorry for dumb question

Darkboss10 said:
which is the pit file, sorry for dumb question
Click to expand...
Click to collapse
If I remember correctly you need to uncheck PIT in odin and this should help. BTW. What are you trying to flash?
From Edge of Galaxy Seven

I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .

Darkboss10 said:
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Click to expand...
Click to collapse
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app

so i do better go with the v4 bootloader and i will check if the pit file is uncheck, what should i put on the re-partition case of odin active or inactive?
by the way thanks for your help

kangi26 said:
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
hey i did exactly as you told me , and for first time i guess i have an advance, i still get an error but at least a new error , check it out maybe you know what it is
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
any idea what can be?
i try to flash the G935a...PI2 rom bot without the CSC which i guess is the pit file right?

When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC

kangi26 said:
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
Click to expand...
Click to collapse
This is what i get . But it doesnt enter recovery at the end. It just shut off ....

Darkboss10 said:
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Click to expand...
Click to collapse
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app

kangi26 said:
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
if you watch the top corner blue letters it says recovery booting....

Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
I'm at a loss man, I'm sorry. I haven't seen that before, I dont get the "Samsung" part when I enter Recovery

Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
Can you post screen from download mode?
From Edge of Galaxy Seven

norbarb said:
Can you post screen from download mode?
From Edge of Galaxy Seven
Click to expand...
Click to collapse
There you go . By the way i should mention the phone only turns on download mode when plugged.

Darkboss10 said:
There you go . By the way i should mention the phone only turns on download mode when plugged.
Click to expand...
Click to collapse
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven

You need to start by using the latest Odin, 3.12.3 for installing the original ROM. If you try to unlock, you need to go get the PrinceComsy version. PrinceComsy won't work for in-bricking a device, and if you have any of the stock versions of the ROM, you need the 3.12.3 version.

norbarb said:
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
Click to expand...
Click to collapse
I try that . Now i got this error but only on the phone screen and odin is stuck at initialization .. any idea what could be

i download the venom stock rom and the odin file he suggest but that odin is v 3.11.2 , so that was the one that trows me the odin protocol error, i try the same rom but with the v 3.12.3 odin , and it start working but it says fail at the on the recovery image, do that has to do something with my problem that the phone can boot into recovery mode?
here are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Erase)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

SM-G930A Cannot boot. Attempting to flash offical firmware using odin fails

I get this error while attempting to flash official ROM using Odin. the phone currently cannot boot. Please assist in any way possible. I just would like to get my phone to function like normal again. I attempted to flash only AP
ON PC LOG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ON PHONE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Any way I can get the phone usable again? I really would like if anyone could assist in get it working again. It does not need to be rooted, it only needs to boot and function

Mine did same thing. I fixed mine by doing a factory reset from recovery mode. Reboot the phone and hold power+volume up+home key at same time until u see recovery mode in top left corner. It will say installing system update then go to a menu. Hit volume down till factory reset is highlighted. Hit the power button. After its complete go to wipe cache and wipe it also. Then click reboot system now and should now boot fine

Js7bla said:
Mine did same thing. I fixed mine by doing a factory reset from recovery mode. Reboot the phone and hold power+volume up+home key at same time until u see recovery mode in top left corner. It will say installing system update then go to a menu. Hit volume down till factory reset is highlighted. Hit the power button. After its complete go to wipe cache and wipe it also. Then click reboot system now and should now boot fine
Click to expand...
Click to collapse
I've had to do the same thing in a similar situation and it fixed it for me. Good fix!

Are you sure the stock version you are trying to flash is the same or newer than the version you had installed?

jpasher said:
Are you sure the stock version you are trying to flash is the same or newer than the version you had installed?
Click to expand...
Click to collapse
I think you have to Flash all 4 of the files, AP,BL, CP, CSC in Odin Latest version of stock is APK1

I flashed just this AP_G930AUCS4API2_CL8575098_QB10880146_REV02_user_low_ship_MULTI_CERT.tar in the AP section and my phone worked again. I don't know if that' might be bad thing or not though

I choose Phone Bootloader Update in Odin. It was the only thing that worked for me.

Can't turn on my phone, can't open twrp, Odin fail Galaxy s8

Hello everyone,
I'm following this forum for mounths but just had chance to register.
I tried to root my phone, then I think something went wrong. Turned on the phone and used for a while, but had a fingerprint sensor error. After that I reboot the phone, but while showing the Samsung logo, I got "only official released binaries are allowed to be flashed" top of the screen. And phone was automaticly turning off after that.
Then I put the phone download mode and tried to install official firmware. Odin was failed.
I tried to flash bootloader only, and fail neither.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I thought maybe the stock rom that I trying to install is older. But now I can't open the TWRP with the buttons for the wipe data. The Samsung Galaxy logo views, after that it turns off.
Trying to install twrp again, Odin gives me fail too. Now I can only open the download mode.
I need my phone today urgently for contact with my colleagues.
Please ask me for the missing informations and please help me ASAP.. Sorry for my bad and complicated English..

Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at https://mega.nz/#!5Q4TATzQ!DT2OQO01KHfw7HsVNElZSfZ4DHoO9W99k3dJqfumMhg for s8 and at https://mega.nz/#!dMZ0zbDL!oYrcBh8DeOqMFeO9QObu8eNXVrjsajXICJ0o3MJPJ-o for s8+.
I also find a video for this issue at https://youtu.be/VTi3uBkpJic
Try this and reply back..
- ————————————
Or just try to flash the stock rom without the cm.bin/ bl firm.

memreb1801 said:
Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at for s8+.
I also find a video for this issue at
Try this and reply back..
Click to expand...
Click to collapse
Thank you for helping but I tried these solutions allready. Now downloading another country's official rom from sammobile. I'm going to try this one but I have no hope

Good luck!!??

My solution did work. Download the latest firmware and install it with Odin. Thanks everyone anyway..

SM-T580 Potential Brick Issue

OK, so have a Galaxy Tab A 10.1, SM T580. An attempt to drop a rom on it failed(not sure why tbh, plugged into the front usb hub instead of unplugging an external HD to free up a usb port, bad rom, not sure), and I am unable to restore it to default. It now goes straight to the 'Use emergency recovery software' screen which doesn't work for that model, and every attempt I have made to utilize Odin has failed, with both 3.09 and 3.13, utilizing XAR-T580UEU2BQF1-20170623075724 files; inevitably it ends up stuck on the 'Initializing' step with no further activity(up to 2 hours anyway).
Requesting some semi-detailed assistance.

Thaser said:
OK, so have a Galaxy Tab A 10.1, SM T580. An attempt to drop a rom on it failed(not sure why tbh, plugged into the front usb hub instead of unplugging an external HD to free up a usb port, bad rom, not sure), and I am unable to restore it to default. It now goes straight to the 'Use emergency recovery software' screen which doesn't work for that model, and every attempt I have made to utilize Odin has failed, with both 3.09 and 3.13, utilizing XAR-T580UEU2BQF1-20170623075724 files; inevitably it ends up stuck on the 'Initializing' step with no further activity(up to 2 hours anyway).
Requesting some semi-detailed assistance.
Click to expand...
Click to collapse
You need to put it in download mode first.

I have done so with every attempt. It still continues to simply hang at 'initializing'.

Thaser said:
I have done so with every attempt. It still continues to simply hang at 'initializing'.
Click to expand...
Click to collapse
Post a screen shot of your download screen and odin log.

ashyx said:
Post a screen shot of your download screen and odin log.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 22 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:26244/000> Odin engine v(ID:3.1301)..
<ID:26244/000> FAIL open(COM:4)
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Thaser said:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 22 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:26244/000> Odin engine v(ID:3.1301)..
<ID:26244/000> FAIL open(COM:4)
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
looks like your baseband got messed up, download this latest firmware for this tablet and install it using Odin
https://samfrew.com/download/Galaxy__Tab__A⑥__/dzjs/LUX/T580XXU4CSA1/T580LUX4CSA1/

zfk110 said:
looks like your baseband got messed up, download this latest firmware for this tablet and install it using Odin
https://samfrew.com/download/Galaxy__Tab__A⑥__/dzjs/LUX/T580XXU4CSA1/T580LUX4CSA1/
Click to expand...
Click to collapse
It remains stuck at initialization, longest time an hour and a half. No response.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2658 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..

Thaser said:
It remains stuck at initialization, longest time an hour and a half. No response.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2658 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
Click to expand...
Click to collapse
use this odin
https://androidfilehost.com/?fid=890129502657595813
also change your usb cable and install Samsung USB drivers from here
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows

zfk110 said:
use this odin
https://androidfilehost.com/?fid=890129502657595813
also change your usb cable and install Samsung USB drivers from here
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Click to expand...
Click to collapse
Did the above, still no success. Stuck at initialization

Thaser said:
Did the above, still no success. Stuck at initialization
Click to expand...
Click to collapse
Make sure the cable you are using is short and you see the added message in odin.
Long cables will not work.
If the issue still persists and changing USB port doesn't help then trying another pc is the only option.

ashyx said:
Make sure the cable you are using is short and you see the added message in odin.
Long cables will not work.
If the issue still persists and changing USB port doesn't help then trying another pc is the only option.
Click to expand...
Click to collapse
I will second this. My laptop will not see Odin added at all for most of my devices. And out out of like 6 USB cables only 1 works for Odin downloading but good for everything else

Custom Binaries Blocked by FRP Lock
May I start you over with your diagnostics. Not initializing? Does this mean you cannot boot into recovery, at all? But can get into download mode which you cannot use?
Try booting to recovery and tell me if you see little red letters at the top left that say something about FRP lock. If this is your issue I'll explain what's going on with your device.
There are two types of FRP protection I've seen in this tablet. The first one most of us know of and it can be best described as being able to boot or power on compared to the other one which acts similar to a bootloop and does not power on.
This seems to be a common bug with the current Rootings applied to this device that are using CF-Root or a variation thereof. Samsung insisted that CF-Root shouldn't be used on this device and that's where the problem apparently comes from. The device owner is caught in a bootloop type of mode where the logo comes and goes and somehow accessing recovery is impossible. At the top left side of the screen in fine red letters reads, "Custom Binaries Blocked By FRP Lock. " This apparently shuts off the OEM unlock also leaving you with access to the Bootloader/Downloader, but Odin3 would refuse to flash even the official Firmware. Suddenly the impossible Hard-Brick comes to mind. Fortunately for all of us someone invented Odin3 and Samsung device owners rarely have to deal with a hard bricked device..
Here's what you need.:
Odin3.10 to Odin3,13. Either one works. The following file will give you Odin3.13.
The SM-T580 Binary 4 FRP Unlock file can be obtained here (this is a 1.98GB rar file):
https://drive.google.com/file/d/1Rip0qIGo-GbzFdH55s1vIpe6f1aqYKbD/view
Extract the file, preferably to a folder of its own that you create.
Prep device for flashing (boot to download mode), connect to PC and fire up Odin3. The first section should light up blue means you're connected. Click on AP, go to the extracted 3file and doublr click on the file starting with the word "unlock." Wait til Odin does it's checksum and then you can press start.
This will reset your device to factory!!
Now you're going to want to Bypass the Google Account and remove FRP which is the first FRP I mentioned.
Let me know how it goes for you..