Related
Hi I am new to android. I decided to install CyanogenMod on my Indian sgy rooted and had stock rom with Touchwiz and android 2.3.6. So I got some instructions from here . Then I downloaded the file of around 120MB.I booted into recovery mode. I selected update from SD card and then selected CWM.zip I got from XDA thread. It entered the CWM and then I selected Format system, Clear cache and clear Dalvik cache. Then I selected the update from SD card and then selected the CM zip file of 120MB I had in my phone. It installed and then it showed no errors. After conformation I rebooted the phone. It showed Samsung Galaxy Y and then turned black with no Samsung logo. I thought it was doing something and then after 3 minutes I touched the screen it began to draw circles wherever I touched. I thought I bricked the phone. After two minutes I turned it off and then again got into recovery mode and then to CWM mode and got my phone back with Nandroid backup I had.
Was the phone installing and I interrupted it by touching it?
Is there any error on my installation steps?
Kindly reply me how to install this CM and tell me if you get the same and give me the link you used for installing CM
Apologies for poor english if you find any.
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
marcussmith2626 said:
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
Click to expand...
Click to collapse
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
marcussmith2626 said:
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
Click to expand...
Click to collapse
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Xtreak said:
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Click to expand...
Click to collapse
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
marcussmith2626 said:
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
Click to expand...
Click to collapse
Ok I will see them . Great work. Happy hacking
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
imElectronica said:
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
Click to expand...
Click to collapse
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
imElectronica said:
I recommend you to install (rest of quote removed)
Click to expand...
Click to collapse
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
Sorry. Guess I can stop here. I downloaded hyperion 8 . Waiting for my phone to get charged.
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
I'm not telling about best....I express my opinion.....its depends upon u to use this..
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
Xtreak said:
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
Click to expand...
Click to collapse
Yes use mini rom with stock kernel....I use it for 6 month n no prob found....i use it with hellsfusion kernel n found wifi prob but it works smooth with stock kernel.....this is a stable one. this is my fav. rom i ever use.
Q&A for [PATCHER][APP] Dual boot any ROM on all Galaxy S4 variants!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Support for Galaxy S4 Mini GT-I9195
Hi, I tried this on a GT-I9195 using the "Galaxy S4" preset... Both ROMs seem to be installed, but once I install the second ROM, there doesn't seem to be any way to boot back into the first ROM.
I'd love for this to work on my device (serranoltexx). Could I help add support for this device in some way?
Thanks
utjunkie said:
Hi, I tried this on a GT-I9195 using the "Galaxy S4" preset... Both ROMs seem to be installed, but once I install the second ROM, there doesn't seem to be any way to boot back into the first ROM.
I'd love for this to work on my device (serranoltexx). Could I help add support for this device in some way?
Thanks
Click to expand...
Click to collapse
I started to wonder how did you install them in the first place???
qtwrk said:
I started to wonder how did you install them in the first place???
Click to expand...
Click to collapse
There were no errors and both ROMs are physically taking up the space; just it boots into the second ROM no matter what I do. It sounds like it's pretty close, can I help make this work?
Dual Boot with MIUI 4.9.26
Hello,
i tried to install the MIUI v5 4.9.26 Multilang but I got the error in the picture attached to this post.
Could you help me to install It? I have Omega ROM for first space and for the second I would install MIUI. I've already patched the ROM with the app for Android on the Omega and the tool create a dual.zip of the original MIUI ROM. I tried to flash it from recovery (TWRP 2.8.0.1 with Aroma MOD)
Thanks,
Whity
utjunkie said:
There were no errors and both ROMs are physically taking up the space; just it boots into the second ROM no matter what I do. It sounds like it's pretty close, can I help make this work?
Click to expand...
Click to collapse
i assume you followed instruction precisely ?
tried both app switcher and zip file switcher ?
Cam someone send me the link to the snapshots?
Sent from my GT-I9505 using Tapatalk 2
Alucard 1.4oc kernel issues
Hey, i am trying to flash Alucard 1.4oc over SlimKat on my Dual partition.. The patched script seems to install fine, but my boot just stops at the Samsung logo, vibrates twice and restarts... I can see that they made some changes to their updater_script, but I have not figured out if this is the source of my problems,or if it is not related to my multi-boot at all..
So, i just wanted to know if anyone has patched 1.4oc on anything other than Primary with success.
App Sharing
twcobra said:
+1
Click to expand...
Click to collapse
sronweb said:
As I understood from previous posts there is some work in progress but nothing yet released. Currently you can share only apps (which is a lot for me...)
Click to expand...
Click to collapse
Well, I was trying to reply to the question on app sharing. I have used both the full share and the individual. I stopped the full share because of the differences between Gapps with the different ROMS. However, the full share seems like a better bet because it is a straight swap of partitions. The individual app sharing has been working, but as it has been noted, data is not part of that... Also, i find the use of hard links challenging when i am trying to look at my filesystem and figure out what is where. Not to mention that it doesn't really let you manage all the apps you care about for all the ROMS in one place. I have needed to go to every ROM if i want to uninstall a shared app and really have it go away.
that said, i don't really want to go down the path of partitioning my external sd card and using something like Link2SD. I am going to wait and see what our patch master produces for his latest updates that try to handle sharing of data, as well.
Response to Primary Rom update question
1) From recovery, flash the DualBootUtilities
2) Select Primary
3) Do a full wipe
4) Exit to recovery
5) From recovery, install your new primary ROM as usual
The big point noted by the OP is to avoid using recovery wipe utilities because they may wipe parts/all of secondary ROMS (those in Dual and MultiSlots)
---------- Post added at 09:58 PM ---------- Previous post was at 09:40 PM ----------
So, I can get these kernels to boot up fine from the primary ROM which is current some recent nightly of CM11
However, when i flash over my dual (SlimKat 8.10) or multi-slot-1 (DirtyUnicorns v8.2) i can't get past the initial Samsung logo. The phone vibrates once .... twice .... then reboots.
EDIT: I should note that i have 2 other kernels that are booting fine for my secondary ROM
Can someone confirm if they are using either of these Alucard kernels succesfully on something other than the PRimary ROM.
thanks
FuzzyPete said:
1) From recovery, flash the DualBootUtilities
2) Select Primary
3) Do a full wipe
4) Exit to recovery
5) From recovery, install your new primary ROM as usual
The big point noted by the OP is to avoid using recovery wipe utilities because they may wipe parts/all of secondary ROMS (those in Dual and MultiSlots)
---------- Post added at 09:58 PM ---------- Previous post was at 09:40 PM ----------
So, I can get these kernels to boot up fine from the primary ROM which is current some recent nightly of CM11
However, when i flash over my dual (SlimKat 8.10) or multi-slot-1 (DirtyUnicorns v8.2) i can't get past the initial Samsung logo. The phone vibrates once .... twice .... then reboots.
EDIT: I should note that i have 2 other kernels that are booting fine for my secondary ROM
Can someone confirm if they are using either of these Alucard kernels succesfully on something other than the PRimary ROM.
thanks
Click to expand...
Click to collapse
Ok, got my kernel patched and working. As it stands right now, it looks like the current releases of the Alucard AOSP kernel (1.4oc) do not patch correctly. I confirmed this for 1.4h and 1.4oc. It took a lot of painful sleuthing, but i finally determined that the Alucard kernel for AOSP gets a patch for the init binary. I could not tell from the commits why this was needed originally, but it appears that Alucard changed something on his end, or the ROMS have changed something else on their end or whatever.. Regardless, the init_kk binary is now incompatible with 1.4 AOSP kernel.. I didn't have a dev environment handy to just change the config and rebuild the DualPatcher app, so i did the following to confirm:
1) Ran the DualPatcher app for the 1.4oc kernel
2) Started recovery, and flashed the patched kernel
3) went to the shell, unpacked the ramdisk and replaced the patched init with the original from the Alucard kernel ramdisk
4) repacked the boot.img, copied it to MultiKernels
5) rebooted
At this point, my ROM booted fine.
9.0 Apk crashing
I also have the same problem. Tried to patch several different ROM for S5 but the app crashes at 0%. Using the 9.0 app
App crashes 9.0
I have the same problem. 9.0 app crashes at 0% when trying patch S5 dual boot ROM. Changed to standard patcher option and tried various ASOP ROMs.
Tried to patch 5.0 PA GAPPs with latest dbug apps failed. Patched CM12 is running ok.
I have a problem updating my ramdisk on the secondary rom(slimkat 4.4.4), can you help me?
I have a problem failed to patch kennel..
Both on v9 debug and v8
I am on ozcan rom v6.2
I have also tried on CM12 but does not work please help
ouwesh said:
I have a problem failed to patch kennel..
Both on v9 debug and v8
I am on ozcan rom v6.2
I have also tried on CM12 but does not work please help
Click to expand...
Click to collapse
Use the 17mb version on alpha 9.0
Dualboot TW Update
Hi guys,
I'm using the Dualbootoption developed inhere. As primary I'm using TW, as secondary DirtyUnicorns. Now the thing: I could make a Update of Touchwiz by Kies. I now, Root Rights will be removed and the Bootloader will be closed. So after the update I have to unlock the Boodloader and to root the Phone again to use the Dualboot Option or only to unlock the bootloader.
Just a few Information please
Best Regards,
Aeneas
AeneasG said:
Hi guys,
I'm using the Dualbootoption developed inhere. As primary I'm using TW, as secondary DirtyUnicorns. Now the thing: I could make a Update of Touchwiz by Kies. I now, Root Rights will be removed and the Bootloader will be closed. So after the update I have to unlock the Boodloader and to root the Phone again to use the Dualboot Option or only to unlock the bootloader.
Just a few Information please
Best Regards,
Aeneas
Click to expand...
Click to collapse
I think you must be rooted to set the kernel for your primary rom, and also have an unlocked bootloader to have custom recovery so you can flash dualboot patched roms
jigsawcrank said:
I think you must be rooted to set the kernel for your primary rom, and also have an unlocked bootloader to have custom recovery so you can flash dualboot patched roms
Click to expand...
Click to collapse
Yeah that's clear. But I have the dualboot option yet. To change after the update its enough only to root the smartphone or also to unlock the Bootloader?
Regards,
Aeneas
Hi All,
This is not my work, and this I am posting due to the reason that there is no Epic ROM link on XDA.
All credits are to the developers and the people who originally posted them in the respective groups.
EPIC ROM
Original Forum -> http://www.htcmania.com/forumdisplay.php?f=2111
7.1.17 Forum -> http://www.htcmania.com/showthread.php?t=1275589http://www.htcmania.com/showthread.php?t=1215759
MIUI Forum -
V7.1.12-> http://en.miui.com/thread-474400-1-1.html - Marshmallow Multilingual
Moderator (MIUI) -> http://en.miui.com/home.php?mod=space&uid=1600578948&do=thread&view=me&type=thread&from=space
All credits goes to them.
ROM Download Link -
7.1.17 -> https://www.androidfilehost.com/?fid=385035244224413492
Epic ZCX TWRP -> https://www.androidfilehost.com/?fid=529152257862681250
Direct Download Link -> http://qc4.androidfilehost.com/dl/F...CX_TWRP+Recovery_Recommended+for+Epic+ROM.img
Tutorial -> http://www.htcmania.com/showthread.php?t=1158555
Thanks & share with people who need this.
Ohh, and if anyone faces Dual SIM Error, follow the following command over in Terminal ->
How do I enable/disable Dual SIM?
Dual SIM support is enabled by default. If you only use 1 SIM and wants to disable Dual SIM support, you can use the following instruction:
Enable Code:
su setprop persist.radio.multisim.config dsds
Disable Code:
su setprop persist.radio.multisim.config none
Happy Flashing
People who get FP FC/ANR/FS, kindly attach a bug log here.
People who get locale/login error, please attach a bug log here.
For any attention or queries, please quote my username, and the thread link.
I will get notified, and will surely assist.
Thanks & Regards,
Vishal
Thanks for sharing btw may i know what the different between this rom with xiaomi eu rom ?
shanemod said:
Thanks for sharing btw may i know what the different between this rom with xiaomi eu rom ?
Click to expand...
Click to collapse
This rom has adblock, better battery improvements, and all chinese bloatware apps removed....so it will b a minimal miui rom
ironclad74 said:
This rom has adblock, better battery improvements, and all chinese bloatware apps removed....so it will b a minimal miui rom
Click to expand...
Click to collapse
Its worse than xiaomi.eu rom as it use global rom as base while xiaomi.eu use czech miui base or china base ! It is a tiny developer group while eu is far greater dev group ! Eu has more feature and mi-globe adds more feature to eu rom!while epic has minor changes than to stock
Camlin3 said:
Its worse than xiaomi.eu rom as it use global rom as base while xiaomi.eu use czech miui base or china base ! It is a tiny developer group while eu is far greater dev group ! Eu has more feature and mi-globe adds more feature to eu rom!while epic has minor changes than to stock
Click to expand...
Click to collapse
Mighty high IRate words.
Atleast we can respect whatever someone does. If you do not like it, then fine, do not use it.
Tiny or big, at least they are trying to do something and learning too.
What might you do mate? If you wanna criticise then look at MiUi Global Dev, and criticise them, it would be helpful. MiUi in the name of development gives crappier updates, and that too everytime they increase the OTA size.
How stupid of MiUi
shanemod said:
Thanks for sharing btw may i know what the different between this rom with xiaomi eu rom ?
Click to expand...
Click to collapse
Right, this ROM can be named Minimal MiUi, as it uses base MiUi ROM, along with few Globe Mi functionalities.
ironclad74 said:
This rom has adblock, better battery improvements, and all chinese bloatware apps removed....so it will b a minimal miui rom
Click to expand...
Click to collapse
Thanks fr the assistance. Cheers
vdbhb59 said:
Mighty high IRate words.
Atleast we can respect whatever someone does. If you do not like it, then fine, do not use it.
Tiny or big, at least they are trying to do something and learning too.
What might you do mate? If you wanna criticise then look at MiUi Global Dev, and criticise them, it would be helpful. MiUi in the name of development gives crappier updates, and that too everytime they increase the OTA size.
How stupid of MiUi
Click to expand...
Click to collapse
True! #respect
Last time I tried to install xiaomieu rom it stuck at "couldn't check device security info" and no way to skip it. Does this rom have this issue?
[email protected] said:
Last time I tried to install xiaomieu rom it stuck at "couldn't check device security info" and no way to skip it. Does this rom have this issue?
Click to expand...
Click to collapse
All miui 8 rom checking device security so better to connect with internet for this.
Rahulraj943472 said:
All miui 8 rom checking device security so better to connect with internet for this.
Click to expand...
Click to collapse
It was connected to internet. But nothing helps.
Don't know about previous versions, I flashed latest 6.12.1 and got this problem.
[email protected] said:
It was connected to internet. But nothing helps.
Don't know about previous versions, I flashed latest 6.12.1 and got this problem.
Click to expand...
Click to collapse
how to reproduce that issue? I'm using 6.12.1 , no error so far.
exodius48 said:
how to reproduce that issue? I'm using 6.12.1 , no error so far.
Click to expand...
Click to collapse
Are you using xiaomi.eu rom.
Clean install from cm13 latest using the recovery provided in the official cm13 thread.
I didn't get any error on flashing log & booting was successful too. But no matter what I cant login into mi account or can skip login.
[email protected] said:
Are you using xiaomi.eu rom.
Clean install from cm13 latest using the recovery provided in the official cm13 thread.
I didn't get any error on flashing log & booting was successful too. But no matter what I cant login into mi account or can skip login.
Click to expand...
Click to collapse
Yes, im using xiaomi.eu rom 6.12.1
Try my method if you came from cm13/any aosp/cm based rom:
1. Clean install miui rom using mi flash, so you need fastboot rom. Download here http://en.miui.com/a-234.html
China rom recommended.
2. Then after comple flashing, boot phone to bootloader , then unlock bootloader.
3. Reboot phone, let it booting. It takes 15 - 20 minutes. Then your device will show MIUI wizard, just complete it. After that, do some customization into your device.
4. Reboot to bootloader from adb: "adb reboot bootloader"
Install twrp from bootloader, i'm using dadi11 twrp, link on my signature. Then boot to twrp, do not boot to system or your device will bootloop, because you're still using official miui rom.
5. Usually twrp can't decrypt data on latest rom dev MIUI 8, just press cancel if you facing it. Do factory reset from twrp to get rid from it, then select "reboot > recovery", do full wipe (cache , dalvik/art cache, system. data), then "reboot > recovery" again
6. Install any custom miui rom like xiaomi.eu, epic, miuipro, etc. Wipe cache & dalvik/art cache
7. Reboot system.
8. Done.
No error or any pop up error for me.
exodius48 said:
how to reproduce that issue? I'm using 6.12.1 , no error so far.
Click to expand...
Click to collapse
Why are you not on rr N
Sent from my Redmi Note 3 using Tapatalk
nikufellow said:
Why are you not on rr N
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
It unstable so far.
nikufellow said:
Why are you not on rr N
Click to expand...
Click to collapse
Deleted
https://www.androidfilehost.com/?w=...cde471fc44376816e4a37cbeb8e65bcf20929bf6d564f
Latest EPIC rom based on 6.12.1
all credits to their authors. Support them they are doin awesome work
[email protected] said:
Last time I tried to install xiaomieu rom it stuck at "couldn't check device security info" and no way to skip it. Does this rom have this issue?
Click to expand...
Click to collapse
[email protected] said:
It was connected to internet. But nothing helps.
Don't know about previous versions, I flashed latest 6.12.1 and got this problem.
Click to expand...
Click to collapse
exodius48 said:
how to reproduce that issue? I'm using 6.12.1 , no error so far.
Click to expand...
Click to collapse
The thing is that the couldnt check security error is due to locale settings.
Use the required locale and also login through Mobile number in Xiaomi EU.
exodius48 said:
Yes, im using xiaomi.eu rom 6.12.1
Try my method if you came from cm13/any aosp/cm based rom:
1. Clean install miui rom using mi flash, so you need fastboot rom. Download here http://en.miui.com/a-234.html
China rom recommended.
2. Then after comple flashing, boot phone to bootloader , then unlock bootloader.
3. Reboot phone, let it booting. It takes 15 - 20 minutes. Then your device will show MIUI wizard, just complete it. After that, do some customization into your device.
4. Reboot to bootloader from adb: "adb reboot bootloader"
Install twrp from bootloader, i'm using dadi11 twrp, link on my signature. Then boot to twrp, do not boot to system or your device will bootloop, because you're still using official miui rom.
5. Usually twrp can't decrypt data on latest rom dev MIUI 8, just press cancel if you facing it. Do factory reset from twrp to get rid from it, then select "reboot > recovery", do full wipe (cache , dalvik/art cache, system. data), then "reboot > recovery" again
6. Install any custom miui rom like xiaomi.eu, epic, miuipro, etc. Wipe cache & dalvik/art cache
7. Reboot system.
8. Done.
No error or any pop up error for me.
Click to expand...
Click to collapse
dadi11 twrp, is official, right?
I do not recall tbh, hence.
max_of_MMX said:
https://www.androidfilehost.com/?w=...cde471fc44376816e4a37cbeb8e65bcf20929bf6d564f
Latest EPIC rom based on 6.12.1
all credits to their authors. Support them they are doin awesome work
Click to expand...
Click to collapse
They are gonna upload the latest one, as there were fixes done post the earlier 2 links.
Anybody notice theres a new 7.1.1 DU official out there? Runs smooth.
Thank you for checking it. There is indeed version of 23 December tagged as official, not weekly. I was waiting for OP of original Nexus 9 DU thead to post it
installed it 2 days ago and everything runs very stable and smooth. no noticed bugs so far. i really like it thanks to devs!
Where pls?
Sent from my Nexus 9 using Tapatalk
albsat said:
Where pls?
Click to expand...
Click to collapse
I don't think that the devs of DU like links to their roms being posted on XDA as they have moved their threads to Devs Base. Head on over to their G+ page at https://plus.google.com/communities/109738128866939227235 where you will find the link you are looking for. Both Official and Weekly builds can be flashed over each other with no issues, however, if you stray onto the RC builds, they cannot be flashed over either the Official or Weekly builds, and vice versa.
Tried this but boot loops. Messed up my tablet too.
I tried it too without luck. It's forever showing the animated boot logo of the red unicorn, but nothing else happens. Gave up after half an hour. Maybe I should have waited an hour?
Elgsdyr said:
I tried it too without luck. It's forever showing the animated boot logo of the red unicorn, but nothing else happens. Gave up after half an hour. Maybe I should have waited an hour?
Click to expand...
Click to collapse
You guys upate the vendor? This rom is stable but the battery percentage is off. Only bug.
Marky__Mark said:
You guys upate the vendor?
Click to expand...
Click to collapse
I apologize in advance for the n00b question, but what does it mean to "update the vendor"?
rom still works awesome for me!
guys get the nmf26f volantis factory image from google and extract the bootloader and vendor.img
then install the bootloader through adb and flash the vendor.img
btw you can get the rom from the official DU homepage. just google it.
Stan Dingback said:
rom still works awesome for me!
guys get the nmf26f volantis factory image from google and extract the bootloader and vendor.img
then install the bootloader through adb and flash the vendor.img
btw you can get the rom from the official DU homepage. just google it.
Click to expand...
Click to collapse
This was the android version I had installed before trying DU, so is it still needed to flash those? Do you mean to flash them before or after installing TWRP and DU?
---------- Post added at 01:37 AM ---------- Previous post was at 01:35 AM ----------
BTW, I had no problem installing LineageOS based on 7.1.1 right after the failing with DU.
Elgsdyr said:
This was the android version I had installed before trying DU, so is it still needed to flash those? Do you mean to flash them before or after installing TWRP and DU?
---------- Post added at 01:37 AM ---------- Previous post was at 01:35 AM ----------
BTW, I had no problem installing LineageOS based on 7.1.1 right after the failing with DU.
Click to expand...
Click to collapse
maybe your DU download is messed up? checked md5?
usually i install the bootloader using adb and afterwards vendor + rom + gapps using twrp
Elgsdyr said:
I apologize in advance for the n00b question, but what does it mean to "update the vendor"?
Click to expand...
Click to collapse
What Stan said. Extract the vendor and bootloader from the latest factory google image and flash the vendor via TWRP as an image. I use Rom Toolbox to extract the image. The bootloader needs flashed via adb. You can update the vendor adb as well.
Thanks for your help, but it didn't work for me. After further investigation it seems the latest 'Official' build keeps giving me ZIP verification errors in TWRP even after redownloading the image. Flashed the latest bootloader and vendor as suggested (using Fastboot - couldn't find a way to do it with ADB) and then tried with the latest RC instead, which didn't fail in ZIP verification. Unfortunately I still get the animated unicorn boot logo forever... *sigh*
For anyone interested, I just found the solution getting help on Google+, which was this:
1. Install DU
2. Install GAPPS
3. Install boot.img from Noobbuilds
4. Reboot
Root is lost but that's easily fixed if needed. It works and runs really smooth.
how does it compare to noobbuilds?
snoopgst said:
how does it compare to noobbuilds?
Click to expand...
Click to collapse
I can't answer that as I only ripped boot.img from the Noobbuilds package. But compared to stock and LineageOS (both 7.1.1), DU is significantly more smooth and responsive.
snoopgst said:
how does it compare to noobbuilds?
Click to expand...
Click to collapse
DU 7.1.1 is the fastest ROM I've ever used on my Nexus 9. The stock kernel is superb. The only reason I use Fire-Ice kernel is because 2 amp charging doesn't work on the stock kernel unfortunately.
tibere86 said:
DU 7.1.1 is the fastest ROM I've ever used on my Nexus 9. The stock kernel is superb. The only reason I use Fire-Ice kernel is because 2 amp charging doesn't work on the stock kernel unfortunately.
Click to expand...
Click to collapse
Could you please tell how can I download the lastest ROM? I checked the DU google + page, but I cannot find the ROM for nexus 9...Thanks.
arminvm said:
Could you please tell how can I download the lastest ROM? I checked the DU google + page, but I cannot find the ROM for nexus 9...Thanks.
Click to expand...
Click to collapse
The code name for Nexus 9 is 'Flounder' (and Volantis). I'm unsure if the ROM on their page will work on the LTE version though.
Until Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong(gladly)
Behold... official Mokee 10.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can experience it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is almost bug free and could be used as daily driver.
Clean install is suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps
7. Reboot and enjoy your Z11
Edit: Audio is fixed now, some users suggested that battery performance is slightyy better now.
Vi7eta said:
Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong.
Behold... official Mokee 9.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can feast upon it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is released Recently and its a nightly build still.. Other then Audio bug (fix will be found below) and broken IR (no fix yet) haven't found any issue in last 24 hours Rom is almost bug free and could be used as daily driver.
Clean install would be suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Audio Fix: https://androidfilehost.com/?fid=1395089523397917582
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps and lastly audio fix
7. Reboot and enjoy your Z11
Click to expand...
Click to collapse
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
fares70 said:
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
Click to expand...
Click to collapse
Go through this page, you will find everything you are looking for.
https://4pda.ru/forum/index.php?s=&showtopic=782022&view=findpost&p=60483845
Be cautious if you flash Mk90.1 2019318, an user got bootloop.
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
valorien said:
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
Click to expand...
Click to collapse
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Vi7eta said:
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Click to expand...
Click to collapse
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
valorien said:
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
Click to expand...
Click to collapse
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Vi7eta said:
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Click to expand...
Click to collapse
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
valorien said:
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
Click to expand...
Click to collapse
As i mentioned its in beta i too am using it as my secondary driver.
Though i havent faced random shut downs but i apreciate you tried the rom and reported the issues.
Please share exact steps you took while flashing mokee.
Thank you, I am using it now, very good rom
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
Good to hear that you having a great ride with mokee.
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Basically there is no restart now, it can be used daily, very good work.
SolidSnake140 said:
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Click to expand...
Click to collapse
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Vi7eta said:
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Click to expand...
Click to collapse
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
SolidSnake140 said:
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
Click to expand...
Click to collapse
twrp 3.0.2.0. dosent support pie.
battery performance?
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
how is the battery performance, compared to the official ROM?
Good rom no hanging but it's over heating in gaming and getting shut down when gaming under 40 battery
jdigra said:
how is the battery performance, compared to the official ROM?
Click to expand...
Click to collapse
Almost same. Although depends on usage.. You might want to try it for yourself to get exact results.